Aligned surface in mocha does not result in 100% scale layer

Hi!
I have to track a plane from a certain reference point. I want the layer that is to receive the corner pin (which is actually just a time-frozen frame at that reference point, masked) to be 100 percent scale at that moment, naturally.
However when I track the plane, align the surface at the reference time and export the corner pin data to the layer, I get a scale value of about 400 percent which mocha compensates with making the corner pin smaller. This results in completely blurred footage at what should be a 100% scale freeze point. I don't really get where I am going wrong, I thought align surface would automatically create a frame where all would be unchanged?
Hope you can get me some hints, thanks!
-Alex Bardosch
Edit: Mocha Version 3.1.0 build 6407 After Effects CC

Ok the normal corner-pin-only mode did work as intended. Still strange, but at least I could find a way around the problem.

Similar Messages

  • PO version change does not resulting output

    Hi,
    Initially PO created with version "0" and resulted message out put automatically and PO got printed.
    Then, user has done some changes to PO then it is resulting version "1" but this vesrion does not results automatic out put as like version "0"
    Please suggest me,
    Thanks,
    Venkat

    hi,
    Check settings again..
    1.whether you have given reason of change while you make changes in the document and whether it has been customized??
    2. Check settings for "set up for change displays"
    3. check Settings for PO messages ....here check whether the field is defined for relevent changes ie." Print relevent Purchase doc. changes"...
    Regards
    Priyanka.P
    Edited by: Priyanka Paltanwale on Sep 23, 2010 10:45 AM

  • When attempting to install "Software Update" from Apple, the process talls at "Configuring Installation".  Even allowing it to run for 24 hours does not result in any progress.

    When attempting to install "Software Update" from Apple, the process stalls at "Configuring Installation".  Even allowing it to run for 24 hours does not result in any progress.

    Thanks for the straightforward tip. I had restarted once already, but the second time was a charm. The install button now works. Don't know if it mattered, but I also repaired disk permissions and then restarted in safe mode this time.
    The printer driver is apparently a different issue in itself. It turns out that the my printer, the HP Deskjet F380, has some fluke that makes it incompatible in 10.6. A new driver is coming out from HP according to Rickmeister in this thread: http://discussions.apple.com/thread.jspa?messageID=10076690&#10076690
    In case anyone else has the same problem with the F380: Like the user in the aforementioned thread, I downloaded and installed the old HP drivers for 10.5, and now at least I can print in the meantime.

  • Adding users to groups in enterprise dashboard does not result in software showing in creative cloud desktop

    if I change membership of a user in the enterprise portal the license does not adapt on the desktop application or web overview. I have tried changing group membership and changing the user.
    While changing the membership an error 500 returns at the top of the screen, but membership is changed.
    Any advice?
    Thanks,
    Eric

    Hi Ashish,
    That was the first thing I tried. logging off from creative desktop, browser even logged off from Windows and OSX, no results. Adding a new non-existent user to the groups works, but changing a user to a different group does not work.
    Eric

  • XSQLPages does not handle 'Expect: 100-continue'

    I am running Jigsaw2.0.5 (from W3C) and XSQLPages1.0.2. When posting messages using libWWW (from W3C), an 'Expect: 100-continue' is included in the HTTP/1.1 header allowing the server to respond with a '100-continue' before the body of the message is sent.
    However, it looks like XSQLPages is ignoring the 'Expect: 100-continue' request and tries to complete the 'xsql:insert-request' without the posted XML document.

    Yes, I am referring to section 8.2.3 of rfc2616.
    As I understand it, the reason for sending 'Expect: 100-continue', is to allow the server (i.e. XSQLPages) to reject the body of the message based on information in the header (Content-Type, Content-Length, etc.) BEFORE the body is sent/received. This will speed up the response time in case of a reject.
    Our application (server) does not really care about this. We have written test code that passes the header and the body in one go and that works OK. However, a customer interfacing to our server is experiencing problems, because they use libWWW to post on our server. Since libWWW breaks up the body and the header, their client does not work against our server.
    BTW: The server mentioned above is part of a IP Telephony solution (not wireless clients).

  • Command-clicking a layer does not select it in the Layer panel

    In earler version of PS, command clicking a layer in the artboard would select the layer in the layer pallet so it could be manipulated. This does not seem to be the case in CS6 (I'm getting the highest level group selected)

    Command key brings up the move tool. And you have different settings for auto-select in CS6 than in your previous version.
    Go check the settings for the move tool.

  • IPod shuffle does not play files 100 MB

    Could anyone help me out with the following issue please:
    After uploading a large mp3 file (>100MB) onto my iPod shuffle (2nd generation, 1GB) - uploading does not give any error messages - the song just does not play when I disconnect my iPod and hit the play button. It automatically continues to the next file in my playlist which is smaller than 100 MB. I reconnected the iPod to my computer and iTunes, and the file is still in the iPod playlist and can be played in iTunes without any problems.
    If I upload a file with a size just smaller than 100 MB (I tried 95 MB) I do not experience the problem mentioned above, it will just play the file normally.
    Is this a limitation of the iPod shuffle or is something wrong with my iPod shuffle?
    Thanks for your help!
    Erwin

    It's probably no consolation, but I routinely play audiobooks >100MB on my 2nd Gen shuffle.

  • Question mark on some of my folders in LR3 on a Mac.  Right click does not result in anything... no drop down menu to fix the problem

    I am trying to learn Lightroom 3 on my Mac.  I mistakenly renamed some folders (not while in Lightroom) by adding a subject to the date.  Lightroom could not find the photos in the folder and gave me an error message that "the file named ... is offline or missing"  I then went back and changed the files to what they were originally named but still get the same error message.  Scott Kelby's good recommends right clicking on the file and i'd have the option to 'find the missing folder'...  Not happening.  What can I do other than starting over?

    I think you might have misinterpreted something in your reading. Try this:
    http://www.lightroomqueen.com/lightroom-thinks-my-photos-are-missing-how-do-i-fix-it/
    or this:
    Adobe Lightroom - Find moved or missing files and folders

  • Sorting a column does not result in distinct values on Dashboard prompts

    Hi,
    We have a period column, the records of which are 'JAN-02' , "FEB-02"...."DEC-09". We need sort this column in descending order in Dashboard Prompts. We have another column "Date", which has been used to sort the period column. To achieve this in descending order, we have converted Show Results from “All Values” to “SQL Results” in dashboard prmpts, then entered the below sql.
    SELECT "CODE COMBINATIONS"."LINE AC PERIOD" FROM INVOICE_PAYMENTS
    order by "CODE COMBINATIONS"."LINE AC DATE" desc
    The above sql resulted in non-distinct values as below. Using distinct in the above sql throws syntax error.
    Period
    JAN-09
    JAN-09
    JAN-09
    FEB-09
    FEB-09
    How do we get distinct values and in descending order??
    Thanks and appreciate any ideas
    Surya

    Go to advanced tab and check "Use distinct clause" that will fire a distinct to the query.
    In the rpd month logical column , there is an option called sort order in the general properties and you need to specify the date column if you need to sort it based on the date column and in the Answers you can simply enable Descending sort order on the same column. That should take care of it
    Hope it helps
    Thanks
    Prash

  • Deletion of plannable values in a cell does not result in zero value

    Hi,
    In a planning report when I wanted to set the values in a plannable cell to '0', I just deleted the value in that cell without actually setting a '0' expecting a '0' to appear in that cell after I refresh my report. But instead I get my original value back in the cell. Is this standard behaviour or a bug or do I need to change some setting to get a '0'.
    I run my planning reports on the portal.
    Thanks.
    Regards,
    Jaya

    Hi,
    Check this out please.
    [Re: Cannot Save empty cell, can only save 0|Re: Cannot Save empty cell, can only save 0]
    regards,
    Ergin Ozturk

  • Alternate ingredients being added at a ratio that does not sum to 100%

    Hi
    Sometimes we have alternate ingredients that are added at 10% of the original ingredient’s mass.
    There is no back-fill, we simply add less.
    If we add these to the alternate ingredients list with a factor of 0.1, and we do not make up for the other 0.9, will we have any issues in the system?
    Please let me know.
    Thanks & Regards
    Ganesh.K

    That is the intention of the alternate factor, so you are ok setting the factor to less than or more than 1.  

  • HRMD_A07 Idoc to update InfoType 0014 does not delimit existing PA0014 rec

    In ECC 6.0, we are using HRMD_A07 Idoc to update infotype 0014 using update data received from a third party application. In XI, I am creating the Idoc with Update Code "U" with E1PLOGI, E1PITYP and E1P0014 segments. E1P0014 holds the data for the latest record.
    If I directly pass the Idoc thru ALE layer, It creates records for the new date range on E1P0014 segment, but does not delimit the previous record by changing its end date. This results in two records in PA0014 with end date of 12/31/9999 - which is wrong.
    I also tried using a wrapper FM to create additional segments in the Idoc representing the existing record in PA0014, with the end date being delimited to incoming record's beg. date minus 1.
    This also results in just creating two additional records in PA0014 corresponding to the two segments in Idoc while existing record in PA0014 stays intact resulting in two records with end date 12/31/9999.
    I also experimented with setting the lock indicator (PA0014-SPRPS) but that also does not result in delimiting the existing record.
    Am I missing something? Is there a piece of config that controls this?
    Regards,
    The time constraint on 0014 is "2"

    Hi Jon and Ashish,
    I too am facing the same issue that the new IDOC is not delimiting the previous record.
    Can you explain how did u get over you issue.
    I'm maintaining the same dates in E1PITYP and in E1P0014.
    Thanks,
    Jilly

  • Ad hoc query does not contain a list

    Hi,
    We created an infoset using table join (T5U13, PA0001 and T5UEE). But as we run transaction PAAH and choose a query assigned to the new infoset, we are getting a pop up screen that says "Query does not contain a list". The button hitlist does not appear in the screen and when we try to search we get the prompt "No data was selected".
    Thanks in advance!

    Hi,
    I am getting the similar error.waht i have done is as follows.may I know the resolution.
    After creating the Adhoc query using the join table functionality the resulting adhoc query does not results any out put.
    What I have done is :
    1.Created a user group through SQ03
    2.Attched user to My user group
    3.Created an infoset using join table functionality(SQ02).
    4.Saved and generated the infoset
    5.Added the user group to the infoset and than run the ADHOC query.
    The table I have used to join is all PA table (For test pupose)
    Though the purpose of the custom infoset is to join PA,OM and E rec infotypes, for testing purpose I have joined only PA infotypes.
    Result:The adhoc query does not gives any out put instead it says no data could be read.
    Could you please tell what else I need to do so that the custom infosets gives an out put.
    Will greatly appreciate your help.
    Thanks and best regards
    Rajeev

  • Is it possible to use a tax code in FB60 but which does not post any tax?

    Hello Gurus,
    Can you advise if it is possible to configure a tax code which can be selected in FB60. But we want this tax code not to post any tax value in SAP but simply to be allowed to be selected and populated in the doucment. In FTXP a tax code can be setup that does not need to have a tax rate % maintained against it or be linked to a GL account. However, this tax code cannot then be used in FB60 as the system asks that a rate is maintained and then that an account must be maintained.
    Can you advise if it is possible to maintain a tax code in such a way that it can be selected in FB60 but does not result in any tax posting to any tax account? We want it so that no value is posted, so even a 0% rate would not be good.
    Thanks for any ideas on this.
    Mart

    If you set up 0% tax code, system will NOT post any entry to GL account. You can use the tax code in FB60 & MIRO & PO too.
    thanx

  • Script does not pick up values as intended

    Hi
    I have written a CALC routine where in i want to do the following:
    -If there is any input done for that rate in the month, the routine should do nothing
    - If there is no input in that rate account in the month, it should pick up the previous period data.
    But this IF condition does not work and I have not been able to understand why so.
    Can someone pl tell me what goes wrong in the below script?
    If i remove the IF command the script works (but if then overwrites any input made for the period)
    SUB Exch_Rate_Cf
    'carry forward of composite exchange rates for FA Opening Balances
    IF HS.GETrate("A#Exch_EquCap.I#[ICP None].C3#[NONE].C4#[NONE]") = "0" THEN
         IF HS.PERIOD.MEMBER = "JULY" THEN
    HS.EXP "A#Exch_EquCap.I#[ICP None].C3#[NONE].C4#[NONE] = A#Exch_EquCap.Y#Prior.P#Last.I#[ICP None].C3#[NONE].C4#[NONE]"
    ELSE
    HS.EXP "A#Exch_EquCap.I#[ICP None].C3#[NONE].C4#[NONE] = A#Exch_EquCap.P#Last.I#[ICP None].C3#[NONE].C4#[NONE]"
    END IF
    else
    END IF
    END SUB

    Hi
    I have tried both the approaches.
    "JUL' does not work as we have given JULY as the dimension member name
    The other approach also does not result in any result being calculated --- i think something is going wrong and the script does not go into the IF condition itself :(

Maybe you are looking for