Alignment issues with quiz boxes in captivate 7

when viewing quiz check boxes with their associated question they seem aligned in captivate. but when i preview the slide or publish the slide they are no longer aligned.
is there a fix for this?
my work around was to make the questions white and place a blk text box over it so i can manually move the question box separately from the check box.

Hello and welcome,
Which version of 7? If you don't have 7.0.1.237 yet, it is time to upgrade. I think this is one of the fixed bugs.
Lilybiri

Similar Messages

Resizing issue with login boxes in Captivate 5

Hi
I am recording a software simulation where the user has to enter their login detail in a demonstration.
I have to record it fullscreen (1152 X 864) and then resize it to 750 x 545. That works fine but when I view the resized slides the typed information (login and password) have not shifted relative to the login box and so appears as a field half way down the page instead of inside the box(s).
Has anyone experienced this and is there something I can do apart from recording in 750 x 545 (not ideal as half the login page is cut off) or leaving the whole thing at the higher resolution (when published it means the user will have to scroll to view the entire slide so not ideal either).
I have done it many times in Captivate 4 and it works fine.
thanks

Hello,
This is a known issue and the Adobe Team is working on it, this is what I read in this thread:
http://forums.adobe.com/thread/754748?tstart=0
Lilybiri

Colour alignment issues with CP1515n

I'm having some colour alignment issues with my Color Laserjet CP1515n. Lately, I've noticed that the 3 colours go out of alignment from the middle towards the right of my printouts. Alignment at the left towards the middle half of the page is ok but gets progressively worse towards the right side of the page.
Nothing in the user interface allows me to reset the colour alignment. What can be the cause of this and what's the remedy? This printer is slightly over a year old and has only just gone through its first set of toner cartridges.

I am also having alignment issues to the same nature as the post below. I have just replaced the Black, Magenta and Cyan toners. After doing this the alignment goes out of register from left to right (left edge fits right edge all colours are out of fit by 2mm).
I have also found nothing in any manuals as to how to adjust or fix this problem. This is the second time I have replaced these colours. I have re-calibrated and taken the cartridges out several times but it is still the same.
Any advise would be helpful. As it is at the moment the printer is unusable for my job and it's the only one I have.

Awt alignment issue with japanese character

I am using japesenes OS(Win XP ) and running awt application (JDK1.6).
For Choice box (dropdown box) ,if the font is less than 15 and if there
is a mixture of japanese and number ,the numbers and the Japanese characters
are not vertically aligned.
I am using java.awt.Choice component to display all the months
Choice month =new Choice();
month.insert ("1 \u6708", 0);
month.insert ("2 \u6708", 1);
month.insert ("3 \u6708", 2); .. so on
While running the applet , in display window
The numbers and the Japanese characters are not vertically aligned.
When a month is selected, it is slightly truncated at the top.
My default font is [family=SansSerif,name=sansserif,style=plain,size=12]
when i change the font to 15,the characters are properly aligned.
Did anyone faced this before? if so can you please clarify why this behaviour when font size
is less than 15 or how to resolve this issue without changing the font size .
thanks in advance,
ruhul

Hi,
I have also faced the above mentioned issue.The workaround of using Full Width unicode though resolves the alignment of Japanese with english/numbers/special characters.
There is other issues with this to mention a few:
(a) The text is still top aligned.
(b) A leading and trailing space is added to the value in the choice component when full width unicode value is used instead of english/number/special characters.
It would nice if the mentioned issues could be resolved or if a work around could be suggested.

Aspect ratio issues with SD box and no help from Verizon

I just renewed my 2 year contract which included a free box but a billing screwup resulted in repeated charges for the box. A CS rep credited the account and said I had the wrong box and she would send out a new one.
i had a 7100 Motorola HD box. I have an older television set (that cannot control aspect ratio) and I have never had HD service but this was the box I was sent by Verizon as part of my contract. Why they felt it had to be changed I don't know, but ..... the box they sent was a 2500 SD box which does not give me an acceptable picture.
It's totally random. Some channels are 16:9. Some are overzoomed 4:3. The FIOS channel bar at the bottom is partially off the screen and the content is clipped around the edges. Commercials are totally random in size and appearance.
The # key on the remote does not work. There is no option in Settings to change the aspect ratio.
CS was ZERO help. They concluded that I had to either deal with the scattershot image sizes and clipped image content or go buy another television. SERIOUSLY VERIZON?
I couldn't get an answer as to why the box I was sent by Verizon as part of my original contract that provided a perfectly acceptable image had to be replaced with a box that doesn't provide squat. I have had Verizon service for approximately 7 years with this same television and this is the first time I've been given a box that can't produce an acceptable image and a remote that can't resize. So why now?
This smells like a bait and switch, or an attempt to get customers to pay for an upgraded box for a service they don't want just to get an acceptable picture. I live in an urban area and there is plenty of older equipment in these homes. So are customers like myself just being told even though you pay a significant amount of money for a Triple Play you are only getting 2 parts of the service?
I find it hard to believe there isn't some way to make the box or the remote change the image size. Can anyone help?

why do so many topics go to private section? we need to see how it's responded to in case we have the same problem..
but yes, our 2500 sd box, basically the 4:3 standard non HD box broadcasts to fit a 4:3 TV.. now some channels will have the black bars on top and bottom to accommodate the 16:9 aspect ratio.. you'll notice this if you run the 2500 box on a flat screen.. if you have it in 16:9 ratio on a flat screen it looks stretched.. the only way to watch regularly is in 4:3 mode.. which basically has the image with bars on all sides.. or you can zoom it and lose a portion of the image.. but it's because the box thinks you're using a 4:3 sd tv so the boxes appear on top and bottom so it can still fit the wider image it's filmed in.. so with flat screens you need the HD box i guess.. unless there is something i'm missing but there isn't a setting that i can find to change how the box exports the image for a flat screen or 4:3. I know the HD boxes have an 'SD Override' option.. which i guess tells the box you're not using a 4:3 tv anymore.. but that option is not on the 2500 SD box.. believe me i looked.. but this is all in reverse for your issue anyhow as you're having trouble with the SD box on an SD TV... which yeah, if you run SD the quality of picture is not as good as the HD programming.. so please let us know what they say to do for you.

Firefox issue with quiz?

Hi I finished the quiz for week 1 on Firefox, it showed my score and prompted me to press the finish button to continue. When I do nothing happens, so I'm unsure if my score has been recorded. I know some of the other discussions mentioned that there was a small bug or issue in IE, but I thought it best to report that I was having a similar issue with Firefox.
Damian

Hi Damian -
Thank you. As I noted in this post, later versions of FF (not sure starting with which version) disallow windows closing.
Tom

Problem with Quiz created in Captivate 4 imported to Captivate 5

Good day,
I finally got upgraded to the eLearning Suite so I am now using Captivate 5. I have a course that has a quiz built in Captivate 4. It is designed that if the user scores less than 80%, they are returned to the start of the quiz. If they pass, it is supposed to jump them to the "completion" screen" I have created. However, since I imported this into Captivate 5 and I view the quiz, on the first fail, it takes me back to the beginning of the quiz on my first try. However, on the second try if I fail it again, it just goes to a white screen. I have changed the "On Fail" settings to 999 and indefinite. Neither seem to have an impact. Not sure what else I could try.
The thought of rebuilding the quiz makes me wish we had more than three stories in this building!
Here is a link to my captivate 5 file. http://coventry.mzinga.com/content/ss/TestSCORMFiles//Enhanced_Authorization_Integration/w orkers_comp_just_the_quiz.cptx
Any help would be GREATLY appreciated.
Thanks,
Eric

Hi Eric
While it may make you feel like you have accomplished something by asking if Adobe has updates, what you have done is the equivalent of walking into the waiting area of the service department of a car dealership and asking aloud if there are any updates on your vehicle. The other customers are likely the only ones that hear you ask and they just look back at you with puzzled expressions on their faces.
The thing is, this forum is a bit unusual in that members of the actual Adobe Captivate development team visit here occasionally. But you can't count on that being the case. They do have other work to do.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Alignment Issues with Spry Menu Bar in Safari

www.laurentambard.com
I am new to CS5 and currently building a site for a friend. Having issues with aligning then far right spry menu bar so that it is flush with the page. It only shows a problem on Safari (as far as I know). Also the second tab (About) is dropping down slightly when the drop down menu is selected and not sure how to fix it.

If you place the menubar in a container with an ID of nav or similar and a background color of #EEE so that it blends in with the background colour of the menu items, the centralise the menubar and menu items as per http://labs.adobe.com/technologies/spry/samples/menubar/CenteringHorizontalMenuBarSample.h tml, it should go a long way to meeting your requirements.
Gramps

Display issue with Combo Boxes and Logo

Hi All,
I am facing a couple of issues with my dashboard:
1. Combo boxes display - I have placed a series of combo boxes one below the other. During the preview, when I click on the first combo box, the values spread below. That is, the labels, and options of the next combo box are also visible. The options in the combo box are not seen clearly. I have tried many permutations and combinations with "Bring Forward +" and "Send Back -" but none of them seem to work. For example, keeping the first combo as bring forward and next one as send back etc. Can you please help me in this regard?
2. Logo - I have used image component and embedded a logo from my local system. Later I saved the xlf in the repository. When I import the xlf from the platform, it displays the logo fine. But however, this behavior is not constant. It sometimes doesn't show the image. Do I have to save the image also in the repository? or in a common shared folder? If I embed the logo does it not mean that the xlf hold the copy?
Any help in this regards is highly appreciated.
Thanks and regards,
Sandeep.

Hi:
For your question
1) Do you need your combox overlapped? I tried to overlap my comb box and preview it, seems works fine for me. it only chooses the first comb box. But I am suggesting that if you want to show/hide the different combox in the same position at run time, you can try to control the visibility by some other component.
2) The answer is NO, the image embedded in the image component will be saved to xlf file, there is no need to save it individually. Try to clean your cache files in your machine and do it again.
Hope it helps.

Privileges/permissions issue with drop box/archive folder

Hi there,
I'm having an issue with the permissions on a folder on my iMac. I'm running Leopard. Here at our office, I have my computer set up just like everyone else; within my drop box I have an folder titled "Archive", and within the archive folder I have a folder named after the boss' external hard drive. When the files are on her hard drive, she moves them into this folder so that we know they're completed and can be burned to disc.
For some reason though, she can no longer access this folder in my drop to drag anything into it. One day I found something online that told me to set something through my system preferences. It worked, but I can't remember what I did! The folder seems to have "relapsed" and once again, she can't access it. "Get Info" doesn't work, no matter how many times I change the permissions- it always says everyone should be able to read and write. I've also tried changing permissions and shared folders in the "Sharing" section of system preferences. It just doesn't seem to want to go. I think she might be running Tiger; is there a possibility that that's the issue?
Any thoughts? Any help is greatly appreciated! Thanks!

I would check the system preferences / sharing / file sharing .. highlight file sharing (leftside) and setting to edit changes will be on right side for 10.6.x S Leopard. I would look for a somewhat similar setup in Tiger for its file sharing settings.

Issue with 'text box' in rtf sub template for peoplesoft XMLP

Hi all,
i have a weired problem using 'text Box' in a sub template. I am calling a sub template from my template. In my Sub template i have a text box ( i am using text box bcoz i want to justify the text not to the page margin but starting from a specific column.not sure if there is any other way with which i can do the same !!) . When i process the report (using application engine program) i get the below error
Message Log entry:
[052311_071441208][oracle.apps.xdo.common.xml.XSLTWrapper][ERROR] XSL error:
psxmlp://SUB_BMX2<Line 63, Column 191>: XML-22031: (Error) Variable not defined: '_MR'.
@Line 63 ==> </xsl:stylesheet>
[052311_071441216][oracle.apps.xdo.template.FOProcessor][EXCEPTION] java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:618)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeProcessXSL(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(Unknown Source)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
     at oracle.apps.xdo.template.FOProcessor.createFO(Unknown Source)
     at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
     at com.peoplesoft.pt.xmlpublisher.PTFOProcessor.generateOutput(PTFOProcessor.java:74)
Caused by: oracle.xdo.parser.v2.XPathException: Variable not defined: '_MR'.
     at oracle.xdo.parser.v2.XSLStylesheet.flushErrors(XSLStylesheet.java:1534)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:521)
     at oracle.xdo.parser.v2.XSLStylesheet.execute(XSLStylesheet.java:489)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:271)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:155)
     at oracle.xdo.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:192)
     ... 13 more
[052311_071441218][oracle.apps.xdo.template.FOProcessor][ERROR] End Memory: max=64MB, total=11MB, free=1MB
PeopleTools 8.49.27 - Application Engine
Copyright (c) 1988-2011 PeopleSoft, Inc.
All Rights Reserved
Processing started
data extraction for EMPLID:1000646332 EMPL_RCD:0 EFFDT:2009-12-28 and EFFSEQ:6
CFilem::LoadDefn(RDCRHIUTEECKNDZN2SPSRQ) : read 1 chunks
UnchunkStuff : read 1 chunks for nCharDataLen 10520 chars
CFilem::LoadDefn(RDCRHIUTEECKNDZN2SPSRQ) : after decode & decompress: 35330 bytes
Calling XMLP
Processing Report Defn:TR_BMX2
Error Executing XMLP.Error generating report output: (235,2309) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport PCPC:51952 Statement:1163
Called from:TR_LATAM_CONTRACTS.ContractsXML.OnExecute Name:ExecuteXmlp Statement:16
Called from:TR_LAMCNTRCT.MAIN.GBL.default.1900-01-01.Step04.OnExecute Statement:20
Process 442706 ABENDED at Step TR_LAMCNTRCT.MAIN.Step04 (PeopleCode) -- RC = 22 (108,524)
Process %s ABENDED at Step %s.%s.%s (Action %s) -- RC = %s
It works fine when i remove the text box from my sub template. I tried to put the text box directly in the main template and it worked fine !! it is erroring out only when i use the text box in sub template !!
Template file:
<?import:psxmlp://SUB_BMX2?>
<?choose:?>
<?when: .//LETTER_CD=”PA4”?>
<?call: BA101?>
<?end when?>
<?otherwise:?>
Invalid Letter Code. No Sub Template Call defined for this Letter Code.
<?end otherwise?>
<?end choose?>
Sub Template:
<?template:BA101?>
Testing without text box.
Testing with text box
there is a text box with text here .. cannot be copied from word !!
<?end template?>
i got the below error when i tried to 'preview' the report from my report definition.
Error generating the report output: During calling method PTFOProcessor.generateOutput, the XDO engine throws an exception:NULL. (235,3101) (235,2309)
Error occurred during the process of generating the output file from template file, XML file, and the translation XLIFF file.
Any help would be greatly appreciated.
Edited by: Naveen Kumar on May 23, 2011 4:31 AM

misunderstood =/
Original (Coming - output): "<PAY_TXT>PAYκ Contact your bank or financial institution to make this payment from your cheque, savings, debit or transaction account.</PAY_TXT>"
it's in output but what is data in database ?
sorry but without knowing about source data for forming the xml i haven't ideas about your problem
in db it's "TM " or "™" or ... ?
Original (Coming - output): "<PAY_TXT>PAYκ Contact your bank or financial institution to make this payment from your cheque, savings, debit or transaction account.</PAY_TXT>"
Something like XAE or "K" after PAY Value in the xml tag and continued the text value. (Tag value is not getting copied exactly here - i am sorry for that )
that's ok. i need to see the problem not the data as is
Expected (output): "Here it needs to produce the "PAY TM" (Here "TM" should be super scripted to "PAY" Value in tag).
as super scripted in xml?
as idea - you can have <PAY_TXT>PAY TM</PAY_TXT> and in publisher set TM as super
Designing XSL Subtemplates - 11g Release 1 (11.1.1)

Alignment issues with menu widget and added web safe fonts

I wanted to use a font that was not already on the web safe list so I added one. I have a background rectangle I drew in muse for the main navigation to center on. In muse, I have to shift the menu almost entirely off the rectangle for it to appear centered on the rectangle in the browser. The sub nav I created has a background fill to match the rectangle the main nav sits on. Even though there is no overlapping in muse, there is overlapping of the sub nav fill and the rectangle behind the main nav in the browser. So it looks like 50% white fill on top of 50% white fill. It's obvious and looks stupid! Is this a program bug??? Using CC muse.

I have this issue fixed. But now I'm having a new issue with objects shifting. I really think it's just Muse and the program is buggy! I have read and watched everything I can find on Muse and it's supposed to be so simple a print designer can create beautiful websites. Well, I am a web designer. I understand code. I have used Dreamweaver for 8 years. I wanted to see what was so great about Muse. I'm finding out NOTHING! Because of it's bugs I spend hours trying to fix problems the program creates. I should have just stuck with Dreamweaver! Thanks for trying to help...

Captivate 6 issue with quiz remediation

Hi,
I have below scenario,
slide 1
slide 2
slide 3
quiz slide: In the quiz slide if user enters correct answer it should take to the next slide, if user enters wrong answer should go back to Slide 3 to review the content. After review should be able to take quiz again.
slide 4
slide 5
Currently issue is when user enters wrong answer, he is redirected to slide 3 for review but when he comes back to quiz slide submit button is disabled. i tried several options like adding click interaction on slide 3 and including this as part of quiz scope. nothing worked. Please help me out to resolve this issue.
Thanks,
Krishna

Captivate 6 includes a new feature called Return to Quiz.
You can set the On Last Attempt action on the Quiz slide to jump to your remediation slide (3). You can place a button on that slide labelled as Next and set its action as Return to Quiz. The first time the user passes through that remediation slide, the button action defaults to Continue. But if you returned to that slide from a failed question slide, then on clicking the button again it would jump you back to the question slide you just failed, and the user would be given another attempt at the question.
I'm not personally in favour of this particular 'feature' because it basically means the user can loop around as many times as they want until they get the question correct. In my view this isn't great instructional design.
But it might be good enough for what you want.

Font color issue with animated text in Captivate 5

When I prepare a new animated text and open the property and then click the square to choose a color , I only get a little part of the color panel (when I click the color box) and I have no possibilities to enter the color code either:
I'm working with a Windows XP, 64 bits desktop and I have Captivate 5 version 5.0.1.624.
Any ideas to solve this issue would be appreciated as it is becoming urgent for me.

@Lieve: You're on the French version of Captivate 5 aren't you?
Can you provide a screenshot of what the Animated Text font colour dialog looks like on your PC and upload it here?
This is what that box looks like for me:
It seems that on this user's PC the colour picker isn't able to float on top of the dialog as it should.
I encouraged Valerie to post her issue on this forum in the hope that one of the Captivate developer technicians would chime in with a possible solution. I think this one has got to be some kind of bug due to a language version of Cp.

Color Alignment issue with HP LaserJet Pro CP1525nw

Hi -
I am having trouble with my color alignment. I have tried calibrating the machine several times and still have an issue. Anyone know of a quick fix? In a hurry to print properly!!!

@Chichi_Design
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Alignment issues with quiz boxes in captivate 7

Similar Messages

Maybe you are looking for