Alignment not working when manual reordering playbar

Hi
I'm using Captivate 5. I've followed this tutorials manual reordering trick - http://blogs.adobe.com/captivate/2010/11/playbars-demystified.html, in order to place the progress bar above the other buttons. I've successfully placed the bar in the right position, but now the alignment doesn't work in Captivate, i.e. when I select "align->Bottom Right" or "Bottom-Center" the playbar doesn't align correct - it places the playbar more to the left (when selecting bottom right, the bar is almost in the middle).
I've played around with the progress bar (as this is causing the problem, because when I deselect the playbar option, the alignment works), and saw that the size of the progress bar determines the offset position of the playbar (i.e. if I select align "bottom right" it is as if the progress bar is still in it's original position, because the whole playbar is shifted - the size of the progress bar - to the left).
I also tried to change the "movieWidth" variable, but that didn't seem to change anything.
Is it possible to place the progress bar on top of the other buttons and still be able to align the whole playbar to the right/center?

I've discovered the best way to run GeForce 7300 cards is to change the Advanced settings for them, if you toggle off Advanced Drawing. Once in a while you will still have to press F three times to reset view, but I've found most Open GL features seem to work pretty well with the 7300 if you do this.

Similar Messages

Partner function not working when creating PO with ref to PReq

Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
however it works when i create the PO directly ( without the PR ref )
I am using the same material & Plant for both manual PO & PR to PO.
Any idea what could be wrong .
I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
Thanks
Dkmurthy

Hi,
I have also an issue that seems similar to one you are discussing.
When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
Company code is assigned to purchase organization, and so is purchase organization to plant.
Any idea why there is no automatic message determination in the case of the transaction: ME21N
Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
Any input is wellcome.

TS3276 My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

My o2 email account does not work when sending from my MAC it will accept incoming mail but not send it gives me a message that o2 account (offline) my mac I have no problem with my iPhone or mac laptop. any suggestions please.

Sorry for the delay...
I did what you've told me, new account and manually copied my files from Time Machine. I had lots of permissions problems, but at the end, almost everything is in order... It seems it had to be with some of the Apple Preferences, but I can't be sure, as most of them were dumped to the trash can.
I still don't have my Mail Rules back, unfortunately, although I did goggled some. It is a pity, as I had around 30 or 40 of them, getting my mail in order to each of its mailboxes, but it is a small price as the rest doesn't show the before syntoms.
Thanks for the help, anyway!!

HP ProBook 440 G2, Finger print reader not working when I upgraded form Win 7 Pro to Win 8.1 Pro

My HP ProBook 440 G2, Finger print reader not working when I upgraded form Win 7 Pro to Win 8.1 Pro.
In device manager showing that biometric reader is working properly. But actually the finger printer reader is not reading or senseing. It seems like "dummy" part. Please help me to correctly configure step by step for this issue.
thankyou
Hillet
This question was solved.
View Solution.

Have you installed the Validity Sensor Fingerprint driver software for Windows 8.1?
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943811&swItemId=ob_134806_1&swEnvOid=415...
See page 64 in the following Windows 8.1 user manual for Validity Fingerprint setup information
http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=6943810&docId=emr_na-c04371762&docLocale...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Reply to all using ItemReply does not work when specifying messageid

Hello everyone,
I am trying to use the ItemReply token to perform a "Reply to All"
action on a mail item with a known message identifier and include the
original message text in the response. According to the documentation,
the call should be:
ItemReply(7;1;"message-id")
Still, when I execute this token, apparently only a normal reply action
is performed because only the original sender is listed as recipient.
(The message text is properly included)
However, when I manually select the message in the GroupWise client
first and then execute the same call without specifying the message id,
all recipients of the original mail are listed in "To:" as expected:
ItemReply(7;1)
Could it be that the "ReplyTo" parameter is ignored or does not work
when a message id is specified as parameter? (Setting "IncludeText" to 0
does not change anything)
Thanks in advance and best regards,
Peter Hofer

Worth bumping this message. I find the exact same behaviour as mentioned 5 years ago. Using both GW8 and GW2012.
According documentation, when MessageId is not specified it defaults to the command ItemReplyOpenItem(). I assume that the reason "Reply To all" works without a MessageID is because of that. Someone needs to give a look to ItemReply().

Form in Dynamic page not working when checkbox is used.

I have created a form using dynamic page. The form most have display fields and a checkbox field. When I check a box, it assigns 'Y' value and when unclick, it assign 'N' to the database field.
When I submit the form, the procedure which is supposed to save the form data never gets executed. Well, at least it says, page not found HTTP 404 error.
Interestingly if I make this field a text box and manually enter 'Y' or 'N', and then submit the form, the procedure is executed. Data gets saved.
Is the checkbox not supposed to be used for a database field because checkbox value can be assigned only using javascript and the procedure never get that value ?
Can you please tell me how to use a checkbox for a database field using dynamic page ?
thanks,
Mainak

Sharmila,
When I said, the form does not get submitted, I meant that the procedure does not work. The form gets submitted but the procedure does not work. It gives HTTP 404 error. That is what perplexes me. I am unable to understand why the procedure does not work when I click a checkbox.
May be you can make this work. I am hopeless about this.
Here is the code for the procedure sumbit_form:
NOTE: I ADDED TWO FIELDS CALLED PROMOT VARCHAR2(1), PROMOTID NUMBER(4) TO THE EMP TABLE AND CREATED A NEW TABLE CALLED PROMOTEMP. THIS IS A TEST CASE.
create or replace procedure sumbit_form
(p_empno IN portal30.wwv_utl_api_types.vc_arr, p_promot IN portal30.wwv_utl_api_types.vc_arr, p_action IN VARCHAR2)
is
begin
if p_action = 'save' then
for i in 1..p_empno.count LOOP
update scott.promotemp
set promot = p_promot(i)
where empno = p_empno(i);
END LOOP;
end if;
commit;
htp.p('<b>Saved Successfully</b>');
htp.p('<table border=1 bordercolor="red">');
for c1 in (select * from promotemp where promot='Y')
LOOP
htp.p('<tr><td>');
htp.p(c1.ename);
htp.p('</td><td>');
htp.p(c1.job);
htp.p('</td><td>');
htp.p(c1.mgr);
htp.p('</td><td>');
htp.p(c1.sal);
htp.p('</td><td>');
htp.p(c1.deptno);
htp.p('</td></tr>');
end loop;
htp.p('</table>');
EXCEPTION
when others then
raise;
end;
Here is the code for the dynamic page.
<HTML>
<HEAD>
<TITLE>Promot Emp</TITLE>
<script language="JavaScript1.1">
function include(form) {
var thisform = form;
for (var i=0; i<thisform.length; i++) {
     if (thisform.elements.type == 'checkbox') {
          if (thisform.elements[i].checked) {
               thisform.elements[i].value = 'Y'; }
          else { thisform.elements[i].value = 'N'; }
form.submit();
function show(form) {
var thisform = form;
for (var i=0; i<thisform.length; i++) {
     if (thisform.elements[i].type == 'checkbox') {
          if (thisform.elements[i].value = 'Y') {
               thisform.elements[i].checked = true; }
          else { thisform.elements[i].checked = false; }
</script>
</HEAD>
<BODY>
<FORM action="scott.sumbit_form" method="post">
<table border=1 bordercolor="red">
<tr>
<td> </td>
<td>Name</td>
<td>Job</td>
<td>Manager</td>
<td>Hire Date</td>
<td>Commission</td>
<td>Department#</td>
<td>Include</td>
</tr>
<ORACLE>declare
i number;
begin
i := 0;
for c1 in (select * from scott.promotemp where promotid = :promotid)
loop
htp.p('<tr><td>');
htp.p('<input type="hidden" name="p_empno" value='||c1.empno||'>');
htp.p('</td><td>');
htp.p(c1.ename);
htp.p('</td><td>');
htp.p(c1.job);
htp.p('</td><td>');
htp.p(c1.mgr);
htp.p('</td><td>');
htp.p(c1.hiredate);
htp.p('</td><td>');
htp.p(c1.comm);
htp.p('</td><td>');
htp.p(c1.deptno);
htp.p('</td><td>');
if (c1.promot = 'Y') then
htp.p('<SELECT NAME="p_promot" SIZE="1">
<OPTION SELECTED VALUE="'||c1.promot||'">Yes
<OPTION VALUE="N">No
</SELECT>');
else
htp.p('<SELECT NAME="p_promot" SIZE="1">
<OPTION SELECTED VALUE="'||c1.promot||'">No
<OPTION VALUE="Y">Yes
</SELECT>');
end if;
htp.p('</td></tr>');
end loop;
htp.p('</table>');
htp.p('<input type="submit" value="save" name="p_action">');
end;
</ORACLE>
</form>
</BODY>
</HTML>
thanks,
Mainak

I have Cisco TelePresence SX10 and content sharing is not working when I am dialing through the bridge

I have Cisco TelePresence SX10 and content sharing is not working when I am dialing through the bridge, I can share the content if I drag and drop from RMX, but if schedule the call in Resource manager or manually dial in from device the content is not going to other hand, I have tried to turn off encryption as well but still same issue. can you please help me out with this. I am from Lion co and purchased sx 10 recently.
regards
Hemang

Can you please provide us with a little more information on your systems and configuration / topology, such as, what call control are you using (Cisco VCS, CUCM, other?). what type of "Bridge" are you using (is this a Cisco MCU, or Cisco TelePresence Server, or other device?), what versions of the software are on each of the devices, etc. The more information we have about your environment will help us assist you better. But saying that, if all your core equipment isn't Cisco, you may have more luck in the forums for the manufacturer of such equipment (ie Polycom's Support Community).
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

ExternalInterface not working when swf file is embed inside a dynamically cloned DIV element.

ExternalInterface not working when swf file is embed inside a dynamically cloned DIV element.
It seems that flash movie is identifed as 'undefined' inside document.
//a statically placed div
var staticdiv=document.getElementById('PropDiv');
//dynamically placed div with object tag
var dynDiv =staticdiv.cloneNode( true );
var xD=50;
var yD=50;
if(dynDiv)
dynDiv.style.display = "block";
dynDiv.innerHTML="<object classid=" + "\"clsid:d27cdb6e-ae6d-11cf-96b8-444553540000\"" + "codebase=" +
"\"http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,0,0\"" + "width=" + xD + "height=" + yD +
"id=" + "\"external\"" + "align=" + "\"middle\"" + ">" +
                "<param name=" + "\"allowScriptAccess\"" + "value=" + "\"sameDomain\"" + "/>" +
                "<param name=" + "\"movie\"" + "value=" + "\"external.swf\"" + "/>" +
                "<param name=" + "\"quality\"" + "value=" + "\"high\"" + "/>" +
                "<param name=" + "\"wmode\"" + "value=" + "\"transparent\"" + "/>" +
                "<param name=" + "\"bgcolor\"" + "value=" + "\"#ffffff\"" + "/>" +
                "<embed src=" + "\"external.swf\"" + "quality=" + "\"high\"" + "wmode=" + "\"transparent\"" +"bgcolor=" + "\"#ffffff\""
+ "width=" + xD + "height=" + yD + "name=" + "\"external\"" + "align=" + "\"middle\"" + "allowScriptAccess=" + "\"sameDomain\"" +
"type=" + "\"application/x-shockwave-flash\"" + "pluginspage=" + "\"http://www.macromedia.com/go/getflashplayer\"" + "/>" +
                "</object>";
   dynDiv.style.top=50;
   dynDiv.style.left=100;
document.body.appendChild(dynDiv);
In above situation communication is not establised when a funtion which is retruning boolean is called from flash using
ExternalInterfcae.call.The return value of this function is getting as false inside flash.But the value is true in javascript.
if (navigator.appName.indexOf("Microsoft") != -1) {
   return window[movieName];
} else {
   return document[movieName];
window["external"] is returning as 'undefined'.
Please give a solution to solve this.

Note that you have different file names for the object (images/banner.swf) and the embed (images/banner1.swf)
You also placed the embed in the middle of a param tag and nested all param tags.
Because you didn't include a MIME type and the object doesn't have a classid for an ActiveX control for IE, I'm not sure what Firefox will be using.<br />
The object doesn't have a data attribute to specify the file.<br />
A separate embed is only needed when you specify a classid in the object.
<pre><nowiki><div class="bannercontainer">
<object width="940" height="445" type="application/x-shockwave-flash" data="images/banner.swf" >
<param name="wmode" value="transparent" />
<param name="movie" value="images/banner.swf" />
</object>
</div></nowiki></pre>

I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

IF it is a manufacturing defect and you bought the device from Apple or an authorized Apple retailer, then take it into Apple.

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

what email service - Yahoo mail have been acting up lately
you can try setting Mail as your email client - it resolves this pfoblem for some people
LN

The built-in dictionary on my iPad only works with certain sites. What do I need to do so that I can it all the time. (For example, it does not work when I read e-newspaper.)

What do I need to do so that I can use the built-in dictionary all the time? My iPad 2's dictionary functions on Japanese e-newspapers but not on the Arizona Republic or other e-newspapers.

Rikirannu wrote:
My iPad 2's dictionary functions on Japanese e-newspapers but not on the Arizona Republic or other e-newspapers.
Are you talking about the English dictionary? Mine seems to work ok on the AZ republic web page. Does yours not work on all webpages? Does it not work when you type an English word in Notes and then do select and define?

I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired

I have i phone 4s i there is problem of wifi my wifi is not working when i go to the wifi there is no working on off when i update it as a 6.1 ios on that time again it was good but after 2 days again the same problem i am too tired and i also reset network setting but nothing gonna be worked

Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement.

I tunes is not working. when i go to update apps nothing happens go to itunes page is blank

itunes not working. when i go to update apps nothing happens. if i go to itunes store page is blank and does not go to the store

http://support.apple.com/kb/ts1567

HT5622 my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help

my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help

Hey nocillado,
Thanks for using Apple Support Communities.
It sounds like you have 2 things you want to address. These articles can help you use iCloud with your existing Apple ID.
Get help activating your iPhone
http://support.apple.com/kb/ts3424
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Using the same Apple ID for Store purchases and iCloud (recommended)
Have a nice day,
Mario

The touch screen is not working when I am in the Music app of my iPod Touch. How do I get it to begin working? It just stopped today.

The touch screen is not working when I am in the Music app of my iPod Touch. How do I get it to begin working? It just stopped today.
Does anyone know what I can do? I am unable to switch screens, and I can not see the track that is playing. The only was I can switch between songs is to use the controls on my headphones.

Try the stamdard fixes to rule out a software problem:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

Alignment not working when manual reordering playbar

Similar Messages

Maybe you are looking for