Alignment problem in script
HI
IAM HAVING A HARD TIME IN ALIGNING IN SCRIPT
i HAVE TWO THINGS
<c>Item</> :
<c>Material No</> :
if i remove the space then it becomes,
<C>Item</> :
</>Material No</> :
Is there away to fix the length like we do
&item(20)&
is there any way to figure it out
HI,
go to paragraph format and click on Tabs and give the alignment as per ur requirement. and provide the tab position.
and to display use 2 commas(,,) for each tab stop.
eg: &itab-field1&,,&itab-field2&
Regards
Similar Messages
-
Problem with script- Space alignment
Hi All,
I have problem on space alignment for sapce script.
See the screen shot of my problem
For example:
Material Number quantiy Flag
68965 110.00 N
2343255 20.00 N
See here the record displaying correctely, but its came to second record its not happing correct format. I used Right Justfied option also, but not any solution.
If any know help on this issue.
Regards
GangiHi,
Try by displaying using
&g_t_mara-matnr(*)&.
--- takes length from the dictionary
patil -
Hi friends,
i am facing a problem in script. i have developed the form
and it is working fine .in print preview every thing seems to be ok.
when we try to take a print the right side characters are cutting down by 2
characters every time.
i have moved the content to left but the result is the same.
can any one tell me how to solve the issue.
Regards,
SrinivasHi,
Try to check the lenght of the field/var that you are printing.
change the alignment doesnt solve the problem.
Check in your code what is the lenght and if is the same in your form.
Sample:
&j_1bprnfli-cfop(4C)&
prints only 4 digits of the variable j_1bprnfli-cfop.
Regards.
Rodrigo Paisante -
Alignment problem in converting smartform printpreview into PDF
Hi all,
I am getting some alignment problem in converting smartform printpreview into PDF format, i.e the format of PDF is different from printpreviw of smartform.
kindly suggest something so that alignment is not changed while converting to PDF.
Regards,
Sumalathause below f.m to convert it into 255 characters....
CALL FUNCTION 'QCE1_CONVERT'
TABLES
t_source_tab = i_tline
t_target_tab = so_ali[]
EXCEPTIONS
convert_not_possible = 1
OTHERS = 2. -
hi,
i am having problem in script , the problem is
s.no| descriptio | UOM | Qty | Rate | AMT |
01 aaaaaaaaaaaaaaaaaaaaa 11.01 17.28 170000000 2400000
this is fine but when the 1st column is shot other also get affected.
s.no| descriptio | UOM | Qty | Rate | AMT |
01 aa 11.01 17.28 170000000 2400000
and i cannot draw vertical line here .what is the solution for this.
Edited by: jaihind on Mar 6, 2010 12:21 PM
hi,
problem is if the description field is long then other coloum are comming fine but if description caloumn is small then other also get affected and its comes towards left .
Edited by: jaihind on Mar 6, 2010 12:22 PMHi
For this u can resolve by using the Formatting characters ......
This is your layout ..
s.no| descriptio | UOM | Qty | Rate | AMT |
01 aaaaaaaaaaaaaaaaaaaaa 11.01 17.28 170000000 2400000
Assume that your field names like
s.no | description | UOM | Qty | Rate | AMT |
&sno& &desc& &UOM& &Qty& &rate& &AMT&
asseme that length of these fields(in characters) as per your requirement will be ...
s.no | description | UOM | Qty | Rate | AMT |
8 15 5 8 10 15
For these use formatting characters like ...
s.no | description | UOM | Qty | Rate | AMT |
1stLine &sno& ,, &desc+0(15)&,, &UOM& &Qty& &rate& &AMT&
2ndline &desc+15(15)&
&desc+0(15)& - it will print first 15 characters from 0th position
&desc+15(15)&- From 15th position it will print 15 characters ..
Hope you resolve your issue
Let me know if Any concerns,....... -
Alignment problem on abap report after Unicode conversion
Hi,
I've recently convert my system to unicode. Now my user is complaining the aged debtor report (ABAP) is having a column alignment problem when displaying the Japanese character.
I'm not sure what to do now. Have anyone experience this and let me know how can I sove the problem?
/EidaHi,
you need to regenerate the data
For this regeneration, you start the program RKETREGP with the parameter
application class 'KK', subclass '01' and table name 'KKROBJ'.
br, Guido -
Having a image alignment problem using clearbox
Hi,
I'm having an image alignment problem. I cannot figure it out. I'm using the clearbox - lightbox dreamweaver widget. Using Dreamweaver CS6.
Actual page located here. Any help would be appreciated.
http://dirtysouthink.com/gallery/dustin2.htmlThis has very little to do with Dreamweaver. DW is merely a tool to assist you in building a web site. It is purely a matter of styling (CSS).
When I look at the structure, I see
BODY-CONTENT (width: 490px)
GALLERY (width: 452px)
CONTAINER (width: 500px)
ITEM (width: 150px)
From this I can deduce that:
GALLERY will fit inside BODY-CONTENT
CONTAINER will NOT fit inside GALLERY or BODY-CONTENT
ITEM will fit three times into CONTAINER
To start with, I would reduce the size of the CONTAINER so that it fits inside of its parent. Then I would adjust the width of the ITEM so that only two of them fit inside of the CONTAINER. -
Same alignment problem! can ANYONE help??
Hi guys i still need help with my alignment problem! My nav
bar lokos good in the preview window of fireworks
CLICK
HERE TO VIEW THE NAV BAR IN FIREWORKS
but when previewed in a browser or exported into dreamweaver,
the navbar is all out of order
CLICK
HERE TO VIEW THE NAV BAR IN DREAMWEAVER
Can anyone tell me what is going on?? i really need to launch
the website ASAP.
Thankyou!10totti wrote:
> Hi guys i still need help with my alignment problem! My
nav bar lokos good in
> the preview window of fireworks
>
>
http://img97.imageshack.us/my.php?image=nav1yp1.jpg
I hate being harassed by ads and will not review images on
the image
shack site any longer. Post the screen shot or original file
to your
personal site.
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
Design Aid Kits:
http://www.webdevbiz.com/pwf/index.cfm -
I am having an alignment issue with a website that I recently built using dreamweaver.
http://bacs.myweb.uga.edu
There is not an alignment problem on the front page (index.html), but subsequent pages (http://bacs.myweb.uga.edu/currentstudents.html) change the alignment of the banners below the tabs for each section. Screen resolutions of 1280X800 do not have any alignment issues, but pretty much any other resolution changes the alignment. Is there a solution to this problem? Rather than posting all the code, you should be able to get it from the links above. Thanks in advance.
Frustrated in Athens,
Aldohtml
<body>
<div id="wrapper">
</div>
</body>
css
#wrapper {
width: /*the width of your content */
margin:0 auto; /*this will centre align it*/
padding:0; -
Paper Alignment problems!
I have a HP F4280 all in one printer, just recently when doing any type of printing, everything is printed but comes off alignment, that is not straight on the page. How can I fix this paper alignment problem? I've had this printer for 2 years now and just recently the alignment is off, I haven't done anything different!
The troubleshooting page here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Spot healing brush alignment problem
Using Photoshop CS4 (11.0) on a Mac with 10.5.6. Sometimes the spot healing brush works as expected. However, after working for a while, the alignment seems to be off--I hover the cursor over the spot I want to retouch, but when I click the mouse the area retouched is a bit (1/4" or so) below the spot healing brush cursor. If I quite and restart Pshop the problem goes away. This is with the spot healing brush--not the one where you need to select where to clone from. Is something wrong, or is there a new feature I don't know about that's causing this? I've used the spot healing brush quite a bit with CS3.
If anyone has any thoughts, I'd appreciate hearing them. This is getting frustrating.I think you are talking about a different issue here. This problem is not specific to the spot healing brush.
@ OP: The brush alignment problem is very real and I have it frequently when working with larger files (approximately >500MB in memory). I have two macs, a macbook (GMA X3100) and a mac pro (ATI Radeon HD 2600 XT). So two completely different hardware arrangements that have the exact same problem.This is clearly not a problem with graphics cards.
Drawing with any tool like: brush (any brush - dodge/burn, blur, eraser etc.), lasso (any lasso), line, crop tool etc. will result in a misalignment of about 0,5 cm directly downward. However, clicking on menus and dialogue boxes works as expected. Switching off OpenGL features in PS WILL NOT PREVENT THE PROBLEM (if I shout, maybe Adobe will hear...). The same problem appears whether I'm using a Wacom tablet or a mouse. It even appears when the Wacom driver is uninstalled.
So, if Adobe is not acknowledging the problem it's safe to assume it will be featured in CS5 as well.
@ Jim: Sorry, I would have posted in the other thread but your link does not work anymore. -
Hi Guru's
I have a problem in script printing.
The quantity and netprice are printing incorrectly. i.e., quantity should print as 1.000 where as it is printing as 1,000 and net price is printing as 5,30 instead of 5.30.
I have checked in the owndata settings it is like 1,234,56.00.
I would like to know whether any settings will be there or i need to do any modificatione
Waiting for you reply.Hi!
Here you can find the SAPScript formatting options.
http://help.sap.com/saphelp_47x200/helpdata/en/d1/803411454211d189710000e8322d00/content.htm
If it is not good for you, you might code it in your printer program and put it into a character variable.
Regards
Tamá -
Can I fix the alignment problems my Color LaserJet CP1518ni is having? The red does not line up. I have installed the latest updates, etc. Calibrating does not help. The printer is only a few years old. What gives?
This question was solved.
View Solution.Please be aware that this forum is a peer to peer support forum, it is not a direct link to HP support.
I have a similar issue with a Laserjet cp1525nw, it was mostly corrected by removing and reseating the toner cartridges.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Alignment problems in JSF datatable
Hi,
In my JSF data-table, i have few alignment problems.
For Example, I have 4 columns, Emp-Id, First-Name,Last-name and Age.
What happens is, sometimes, the value in the First-Name cell moves into the Last-Name cell, leadiing to alignment problems. But this is not happening always. Occasionlly this happens.
I tried with iFrames and also by having fixed width for each cell, then also this problem is persisting.
Is it something to do with the datatable display in JSF?
Any suggestions/ideas on how to resolve this problem would be of immense help.
ThanksHi
What happens if you delete the text and retype in and change alignment ?
Does the same issue happens with all sub menu items ?
Please provide the site url.
Thanks,
Sanjit -
Keynote 9 and objects alignment problems
Why keynote does not align object using the first one selected as stated in the user guide?
It will rather use the highest one for top, the lowest one for bottom and a ponderate value for all objects for middle.
Same problem for left center right.
If I do align top with an order like (1 being the 1st selected, 2 the 2nd and 3 the 3rd).
2 1 2 3
1 I end up with Rather than 1 2 3
3
If I do align top with
3 2 3 1
2 I end up with Rather than
1 2 3 1
Can this be changed somewhere?
This is just not logical at all. The first object should be the reference for the alignment.
There also is a problem with distribution, it uses the farthest left and the farthest right in Horizontal distribution rather
than first and last selected.
This is against the documentation.
Cheers.
Joffrey.Hello.
Thanks for your reply. Indeed, these alignment guides are a powerful and great tool that I use all the time.
Nevertheless when it comes to aligning a big amount of shapes, I can't be bothered doing it one by one.
In the manual of Keynote 09' it is written page 89 and 90:
Quickly Aligning Objects Relative to One Another
You can use menu commands to quickly move objects on the same slide in alignment or space them equally apart. First, you must select all the objects you want to align (hold down the Shift or Command key as you click each object to select it).
To align selected objects:
m To align the objects with each other, choose Arrange > Align Objects and then choose one of the alignment options in the submenu.
Left: Positions objects so that their left edges align vertically to the first object you select.
Center: Positions objects so that their centers align vertically to the first object you select.
Right: Positions objects so that their right edges align vertically to the first object you select.
Top: Positions objects so that their top edges align horizontally to the first object you select.
Middle: Moves objects vertically so that their centers align horizontally to the first object you select.
Bottom: Positions objects so that their bottom edges align horizontally to the first object you select.
There is a discrepency between the manual and what Keynote actually does.
I know there are lots of way to circumvent this alignment problem, I would just want to know if there is a place, in a config file, may be where this can be switch from topper to first one for example in case of an align top.
Any other tools such as Omnigrafle, Axure, Visio, Adobe suites, you name it, do it using the first selected object. I whish Keynote would act as expected.
Maybe you are looking for
-
Hi there has been someone on my game clash of clans on my iPad and have spent over £50 and I need the money back what can I do?
-
Ungrouping auto-grouped text in a PDF form
After I have created a form in FormCentral and import it into Acrobat Pro to further edit (I need it to be one page, so I'm moving fields around and compressing space), some of the text is auto-grouped into larger text boxes. For example, I have a na
-
Problem in InterPortlet Communication
hello I read about the WebLogic Portal IPC(Inter Portlet Comm) Model. I tried to develop the sample IPC portlets in WebLogic Portal SP4, i faced some problems. In the event handler dialog box, under the event actions list only thsese ver listed chang
-
How to connect DAQ with ARM9?
please help me to connect DAQ with ARM9. Solved! Go to Solution.
-
Hi Experts, can anyone tell me how i can do setting the timeout in the portal? That would be greatfull. Thanks in advance. Best Regards, Ali