All 11g pre-requisites check failed on solaris 10

During 11g R2 (64 bit) installation on Solaris 10 64 bit, all pre-requisites checks were failed.
Like the first one given below:
=======================
Physical Memory - This is a prerequisite condition to test whether the system has at least 1GB (1048576.0KB) of total physical memory.
Expected Value : n/a
Actual Value : n/a
 List of errors:  - 
PRVF-7531 : Physical memory check cannot be performed on node "sol11oracle-vm"  -
Cause:  Could not perform check of physical memory on the node indicated.  -
Action:  Ensure ability to access the node specified and view memory information.
=======================
It seems that oracle installer not able to resolve the name "sol11oracle-vm".
Please suggest.

Hi, know that its an old thread but anyway.
Check metalink for *11GR2 INSTALL ON SOLARIS FAILS MANY PREREQUISITE CHECKS [ID 989727.1]*.
Oracle 11gR2 software is NOT certified for:
a.) Solaris 10 “less than update 6” with the right patches.
b.) Solaris 10 “less than update 6” with a Solaris patch bundle.
c.) Solaris 10 “less than update 6” with a Solaris release update
It is only certified for a base install image of Solaris 10 update 6 or greater.

Similar Messages

  • Failing all pre-requisite checks for 11.2.0.2.0 RAC on HP-UX Itanium 64

    Hi Guys,
    For Typical OR Advanced Grid Installation (GUI), all pre-requisites are failing on both nodes, like memory, swap, node reachability, groups, user & lot more.....
    But when I try to check Pre-requisite from command line, everything seems to be ok.
    This is what the output...
    $ ./runcluvfy.sh stage -pre crsinst -n sph1erp,sph2erp -fixup -verbose
    Performing pre-checks for cluster services setup
    Checking node reachability...
    Check: Node reachability from node "sph1erp"
    Destination Node Reachable?
    sph1erp yes
    sph2erp yes
    Result: Node reachability check passed from node "sph1erp"
    Checking user equivalence...
    Check: User equivalence for user "oracle"
    Node Name Comment
    sph2erp passed
    sph1erp passed
    Result: User equivalence check passed for user "oracle"
    Checking node connectivity...
    Checking hosts config file...
    Node Name Status Comment
    sph2erp passed
    sph1erp passed
    Verification of the hosts config file successful
    Interface information for node "sph2erp"
    Name IP Address Subnet Gateway Def. Gateway HW Address MTU
    lan2 10.10.16.51 10.10.16.48 10.10.16.51 10.10.1.12 78:AC:C0:8A:07:76 1500
    lan900 10.10.1.174 10.10.0.0 10.10.1.174 10.10.1.12 78:AC:C0:8A:07:6E 1500
    Interface information for node "sph1erp"
    Name IP Address Subnet Gateway Def. Gateway HW Address MTU
    lan2 10.10.16.50 10.10.16.48 10.10.16.50 10.10.1.12 3C:4A:92:48:71:BE 1500
    lan900 10.10.1.173 10.10.0.0 10.10.1.173 10.10.1.12 3C:4A:92:48:71:B6 1500
    Check: Node connectivity of subnet "10.10.16.48"
    Source Destination Connected?
    sph2erp[10.10.16.51] sph1erp[10.10.16.50] yes
    Result: Node connectivity passed for subnet "10.10.16.48" with node(s) sph2erp,sph1erp
    Check: TCP connectivity of subnet "10.10.16.48"
    Source Destination Connected?
    sph1erp:10.10.16.50 sph2erp:10.10.16.51 passed
    Result: TCP connectivity check passed for subnet "10.10.16.48"
    Check: Node connectivity of subnet "10.10.0.0"
    Source Destination Connected?
    sph2erp[10.10.1.174] sph1erp[10.10.1.173] yes
    Result: Node connectivity passed for subnet "10.10.0.0" with node(s) sph2erp,sph1erp
    Check: TCP connectivity of subnet "10.10.0.0"
    Source Destination Connected?
    sph1erp:10.10.1.173 sph2erp:10.10.1.174 passed
    Result: TCP connectivity check passed for subnet "10.10.0.0"
    Interfaces found on subnet "10.10.0.0" that are likely candidates for VIP are:
    sph2erp lan900:10.10.1.174
    sph1erp lan900:10.10.1.173
    Interfaces found on subnet "10.10.16.48" that are likely candidates for a private interconnect are:
    sph2erp lan2:10.10.16.51
    sph1erp lan2:10.10.16.50
    Result: Node connectivity check passed
    Check: Total memory
    Node Name Available Required Comment
    sph2erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
    sph1erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
    Result: Total memory check passed
    Check: Available memory
    Node Name Available Required Comment
    sph2erp 53.3556GB (5.5947372E7KB) 50MB (51200.0KB) passed
    sph1erp 52.2323GB (5.47695E7KB) 50MB (51200.0KB) passed
    Result: Available memory check passed
    Check: Swap space
    Node Name Available Required Comment
    sph2erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
    sph1erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
    Result: Swap space check passed
    Check: Free disk space for "sph2erp:/var/tmp/"
    Path Node Name Mount point Available Required Comment
    /var/tmp/ sph2erp /var 13.8074GB 1GB passed
    Result: Free disk space check passed for "sph2erp:/var/tmp/"
    Check: Free disk space for "sph1erp:/var/tmp/"
    Path Node Name Mount point Available Required Comment
    /var/tmp/ sph1erp /var 13.8158GB 1GB passed
    Result: Free disk space check passed for "sph1erp:/var/tmp/"
    Check: User existence for "oracle"
    Node Name Status Comment
    sph2erp exists(199) passed
    sph1erp exists(199) passed
    Checking for multiple users with UID value 199
    Result: Check for multiple users with UID value 199 passed
    Result: User existence check passed for "oracle"
    Check: Group existence for "oinstall"
    Node Name Status Comment
    sph2erp exists passed
    sph1erp exists passed
    Result: Group existence check passed for "oinstall"
    Check: Group existence for "dba"
    Node Name Status Comment
    sph2erp exists passed
    sph1erp exists passed
    Result: Group existence check passed for "dba"
    Check: Membership of user "oracle" in group "oinstall" [as Primary]
    Node Name User Exists Group Exists User in Group Primary Comment
    sph2erp yes yes yes yes passed
    sph1erp yes yes yes yes passed
    Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed
    Check: Membership of user "oracle" in group "dba"
    Node Name User Exists Group Exists User in Group Comment
    sph2erp yes yes yes passed
    sph1erp yes yes yes passed
    Result: Membership check for user "oracle" in group "dba" passed
    Check: Run level
    Node Name run level Required Comment
    sph2erp 3 3 passed
    sph1erp 3 3 passed
    Result: Run level check passed
    Check: Hard limits for "maximum open file descriptors"
    Node Name Type Available Required Comment
    sph2erp hard 63488 63488 passed
    sph1erp hard 63488 63488 passed
    Result: Hard limits check passed for "maximum open file descriptors"
    Check: Soft limits for "maximum open file descriptors"
    Node Name Type Available Required Comment
    sph2erp soft 1024 1024 passed
    sph1erp soft 63488 1024 passed
    Result: Soft limits check passed for "maximum open file descriptors"
    Check: Hard limits for "maximum user processes"
    Node Name Type Available Required Comment
    sph2erp hard 3687 3686 passed
    sph1erp hard 3687 3686 passed
    Result: Hard limits check passed for "maximum user processes"
    Check: Soft limits for "maximum user processes"
    Node Name Type Available Required Comment
    sph2erp soft 3687 2047 passed
    sph1erp soft 3687 2047 passed
    Result: Soft limits check passed for "maximum user processes"
    Check: System architecture
    Node Name Available Required Comment
    sph2erp ia64 ia64 passed
    sph1erp ia64 ia64 passed
    Result: System architecture check passed
    Check: Kernel version
    Node Name Available Required Comment
    sph2erp HP-UX B.11.31 B.11.31 passed
    sph1erp HP-UX B.11.31 B.11.31 passed
    Result: Kernel version check passed
    Check: Kernel parameter for "ksi_alloc_max"
    Node Name Configured Required Comment
    sph2erp 32768 32768 passed
    sph1erp 32768 32768 passed
    Result: Kernel parameter check passed for "ksi_alloc_max"
    Check: Kernel parameter for "executable_stack"
    Node Name Configured Required Comment
    sph2erp 0 0 passed
    sph1erp 0 0 passed
    Result: Kernel parameter check passed for "executable_stack"
    Check: Kernel parameter for "max_thread_proc"
    Node Name Configured Required Comment
    sph2erp 1024 1024 passed
    sph1erp 1024 1024 passed
    Result: Kernel parameter check passed for "max_thread_proc"
    Check: Kernel parameter for "maxdsiz"
    Node Name Configured Required Comment
    sph2erp 1073741824 1073741824 passed
    sph1erp 1073741824 1073741824 passed
    Result: Kernel parameter check passed for "maxdsiz"
    Check: Kernel parameter for "maxdsiz_64bit"
    Node Name Configured Required Comment
    sph2erp 2147483648 2147483648 passed
    sph1erp 2147483648 2147483648 passed
    Result: Kernel parameter check passed for "maxdsiz_64bit"
    Check: Kernel parameter for "maxssiz"
    Node Name Configured Required Comment
    sph2erp 134217728 134217728 passed
    sph1erp 134217728 134217728 passed
    Result: Kernel parameter check passed for "maxssiz"
    Check: Kernel parameter for "maxssiz_64bit"
    Node Name Configured Required Comment
    sph2erp 1073741824 1073741824 passed
    sph1erp 1073741824 1073741824 passed
    Result: Kernel parameter check passed for "maxssiz_64bit"
    Check: Kernel parameter for "maxuprc"
    Node Name Configured Required Comment
    sph2erp 3686 3686 passed
    sph1erp 3686 3686 passed
    Result: Kernel parameter check passed for "maxuprc"
    Check: Kernel parameter for "msgmni"
    Node Name Configured Required Comment
    sph2erp 4096 4096 passed
    sph1erp 4096 4096 passed
    Result: Kernel parameter check passed for "msgmni"
    Check: Kernel parameter for "msgtql"
    Node Name Configured Required Comment
    sph2erp 4096 4096 passed
    sph1erp 4096 4096 passed
    Result: Kernel parameter check passed for "msgtql"
    Check: Kernel parameter for "ncsize"
    Node Name Configured Required Comment
    sph2erp 35840 35840 passed
    sph1erp 35840 35840 passed
    Result: Kernel parameter check passed for "ncsize"
    Check: Kernel parameter for "shmmax"
    Node Name Configured Required Comment
    sph2erp 1073741824 1073741824 passed
    sph1erp 1073741824 1073741824 passed
    Result: Kernel parameter check passed for "shmmax"
    Check: Kernel parameter for "shmmni"
    Node Name Configured Required Comment
    sph2erp 4096 4096 passed
    sph1erp 4096 4096 passed
    Result: Kernel parameter check passed for "shmmni"
    Check: Kernel parameter for "shmseg"
    Node Name Configured Required Comment
    sph2erp 512 512 passed
    sph1erp 512 512 passed
    Result: Kernel parameter check passed for "shmseg"
    Check: Kernel parameter for "tcp_smallest_anon_port"
    Node Name Configured Required Comment
    sph2erp 9000 9000 passed
    sph1erp 9000 9000 passed
    Result: Kernel parameter check passed for "tcp_smallest_anon_port"
    Check: Kernel parameter for "tcp_largest_anon_port"
    Node Name Configured Required Comment
    sph2erp 65500 65500 passed
    sph1erp 65500 65500 passed
    Result: Kernel parameter check passed for "tcp_largest_anon_port"
    Check: Kernel parameter for "udp_smallest_anon_port"
    Node Name Configured Required Comment
    sph2erp 9000 9000 passed
    sph1erp 9000 9000 passed
    Result: Kernel parameter check passed for "udp_smallest_anon_port"
    Check: Kernel parameter for "udp_largest_anon_port"
    Node Name Configured Required Comment
    sph2erp 65500 65500 passed
    sph1erp 65500 65500 passed
    Result: Kernel parameter check passed for "udp_largest_anon_port"
    Check: Package existence for "OS-Core-B.11.31( ia64)"
    Node Name Available Required Comment
    sph2erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
    sph1erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
    Result: Package existence check passed for "OS-Core-B.11.31( ia64)"
    Check: Operating system patch for "Patch PHKL_38938"
    Node Name Applied Required Comment
    sph2erp Patch PHKL_39646 Patch PHKL_38938 passed
    sph1erp Patch PHKL_39646 Patch PHKL_38938 passed
    Result: Operating system patch check passed for "Patch PHKL_38938"
    Check: Operating system patch for "Patch PHKL_39351"
    Node Name Applied Required Comment
    sph2erp Patch PHKL_40207 Patch PHKL_39351 passed
    sph1erp Patch PHKL_40207 Patch PHKL_39351 passed
    Result: Operating system patch check passed for "Patch PHKL_39351"
    Check: Operating system patch for "Patch PHSS_36354"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_40546 Patch PHSS_36354 passed
    sph1erp Patch PHSS_40546 Patch PHSS_36354 passed
    Result: Operating system patch check passed for "Patch PHSS_36354"
    Check: Operating system patch for "Patch PHSS_37042"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_37042 Patch PHSS_37042 passed
    sph1erp Patch PHSS_37042 Patch PHSS_37042 passed
    Result: Operating system patch check passed for "Patch PHSS_37042"
    Check: Operating system patch for "Patch PHSS_37959"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_40804 Patch PHSS_37959 passed
    sph1erp Patch PHSS_40804 Patch PHSS_37959 passed
    Result: Operating system patch check passed for "Patch PHSS_37959"
    Check: Operating system patch for "Patch PHSS_39094"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_40538 Patch PHSS_39094 passed
    sph1erp Patch PHSS_40538 Patch PHSS_39094 passed
    Result: Operating system patch check passed for "Patch PHSS_39094"
    Check: Operating system patch for "Patch PHSS_39100"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_40540 Patch PHSS_39100 passed
    sph1erp Patch PHSS_40540 Patch PHSS_39100 passed
    Result: Operating system patch check passed for "Patch PHSS_39100"
    Check: Operating system patch for "Patch PHSS_39102"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_41496 Patch PHSS_39102 passed
    sph1erp Patch PHSS_41496 Patch PHSS_39102 passed
    Result: Operating system patch check passed for "Patch PHSS_39102"
    Check: Operating system patch for "Patch PHSS_38141"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_38141 Patch PHSS_38141 passed
    sph1erp Patch PHSS_38141 Patch PHSS_38141 passed
    Result: Operating system patch check passed for "Patch PHSS_38141"
    Check: Operating system patch for "Patch PHCO_40381"
    Node Name Applied Required Comment
    sph2erp Patch PHCO_40381 Patch PHCO_40381 passed
    sph1erp Patch PHCO_40381 Patch PHCO_40381 passed
    Result: Operating system patch check passed for "Patch PHCO_40381"
    Check: Operating system patch for "Patch PHKL_38038"
    Node Name Applied Required Comment
    sph2erp Patch PHKL_41005 Patch PHKL_38038 passed
    sph1erp Patch PHKL_41005 Patch PHKL_38038 passed
    Result: Operating system patch check passed for "Patch PHKL_38038"
    Checking for multiple users with UID value 0
    Result: Check for multiple users with UID value 0 passed
    Check: Current group ID
    Result: Current group ID check passed
    Starting Clock synchronization checks using Network Time Protocol(NTP)...
    NTP Configuration file check started...
    Network Time Protocol(NTP) configuration file not found on any of the nodes. Oracle Cluster Time Synchronization Service(CTSS) can be used instead of NTP for time synchronization on the cluster nodes
    No NTP Daemons or Services were found to be running
    Result: Clock synchronization check using Network Time Protocol(NTP) passed
    Checking Core file name pattern consistency...
    Core file name pattern consistency check passed.
    Checking to make sure user "oracle" is not in "root" group
    Node Name Status Comment
    sph2erp does not exist passed
    sph1erp does not exist passed
    Result: User "oracle" is not part of "root" group. Check passed
    Check default user file creation mask
    Node Name Available Required Comment
    sph2erp 022 0022 passed
    sph1erp 022 0022 passed
    Result: Default user file creation mask check passed
    Checking consistency of file "/etc/resolv.conf" across nodes
    Node Name Status
    sph2erp passed
    sph1erp passed
    The DNS response time for an unreachable node is within acceptable limit on all nodes
    File "/etc/resolv.conf" is consistent across nodes
    Check: Time zone consistency
    Result: Time zone consistency check passed
    Checking settings of device file "/dev/async"
    Node Name Available Comment
    sph2erp yes failed (incorrect setting for minor number.)
    sph1erp yes failed (incorrect setting for minor number.)
    Result: Check for settings of device file "/dev/async" failed.
    Starting check for The SSH LoginGraceTime setting ...
    WARNING:
    PRVE-0038 : The SSH LoginGraceTime setting on node "sph2erp" may result in users being disconnected before login is completed
    PRVE-0038 : The SSH LoginGraceTime setting on node "sph1erp" may result in users being disconnected before login is completed
    Check for The SSH LoginGraceTime setting passed
    Fixup information has been generated for following node(s):
    sph2erp,sph1erp
    Please run the following script on each node as "root" user to execute the fixups:
    '/tmp/CVU_11.2.0.2.0_oracle/runfixup.sh'
    Pre-check for cluster services setup was unsuccessful on all the nodes.
    What could be the issue ????
    Any help would be appreciated...
    Regards,
    Manish

    Started with Grid Installation. Copying Software to remote node & linking libraries were successfully without any issue (upto 76%). But got issue while executing root.sh on Node1
    sph1erp:/oracle/11.2.0/grid #sh root.sh
    Running Oracle 11g root script...
    The following environment variables are set as:
    ORACLE_OWNER= oracle
    ORACLE_HOME= /oracle/11.2.0/grid
    Enter the full pathname of the local bin directory: [usr/local/bin]:
    Copying dbhome to /usr/local/bin ...
    Copying oraenv to /usr/local/bin ...
    Copying coraenv to /usr/local/bin ...
    Creating /etc/oratab file...
    Entries will be added to the /etc/oratab file as needed by
    Database Configuration Assistant when a database is created
    Finished running generic part of root script.
    Now product-specific root actions will be performed.
    Using configuration parameter file: /oracle/11.2.0/grid/crs/install/crsconfig_params
    Creating trace directory
    LOCAL ADD MODE
    Creating OCR keys for user 'root', privgrp 'sys'..
    Operation successful.
    OLR initialization - successful
    root wallet
    root wallet cert
    root cert export
    peer wallet
    profile reader wallet
    pa wallet
    peer wallet keys
    pa wallet keys
    peer cert request
    pa cert request
    peer cert
    pa cert
    peer root cert TP
    profile reader root cert TP
    pa root cert TP
    peer pa cert TP
    pa peer cert TP
    profile reader pa cert TP
    profile reader peer cert TP
    peer user cert
    pa user cert
    Adding daemon to inittab
    CRS-2672: Attempting to start 'ora.mdnsd' on 'sph1erp'
    CRS-2676: Start of 'ora.mdnsd' on 'sph1erp' succeeded
    CRS-2672: Attempting to start 'ora.gpnpd' on 'sph1erp'
    CRS-2676: Start of 'ora.gpnpd' on 'sph1erp' succeeded
    CRS-2672: Attempting to start 'ora.cssdmonitor' on 'sph1erp'
    CRS-2672: Attempting to start 'ora.gipcd' on 'sph1erp'
    CRS-2676: Start of 'ora.gipcd' on 'sph1erp' succeeded
    CRS-2676: Start of 'ora.cssdmonitor' on 'sph1erp' succeeded
    CRS-2672: Attempting to start 'ora.cssd' on 'sph1erp'
    CRS-2672: Attempting to start 'ora.diskmon' on 'sph1erp'
    CRS-2676: Start of 'ora.diskmon' on 'sph1erp' succeeded
    CRS-2676: Start of 'ora.cssd' on 'sph1erp' succeeded
    ASM created and started successfully.
    Disk Group OCRVOTE created successfully.
    clscfg: -install mode specified
    Successfully accumulated necessary OCR keys.
    Creating OCR keys for user 'root', privgrp 'sys'..
    Operation successful.
    CRS-4256: Updating the profile
    Successful addition of voting disk ab847ed2b4f04f2dbfb875226d2bb194.
    Successful addition of voting disk 85c05a5b30384f8dbff48cc069de7a7c.
    Successful addition of voting disk 649196fbdd614f9cbf26a9a0e6670a6e.
    Successful addition of voting disk 8815dfcee2e64f64bf00b9c76626ab41.
    Successful addition of voting disk 8ce55fe5534f4f77bfa9f54187592707.
    Successfully replaced voting disk group with +OCRVOTE.
    CRS-4256: Updating the profile
    CRS-4266: Voting file(s) successfully replaced
    ## STATE File Universal Id File Name Disk group
    1. ONLINE ab847ed2b4f04f2dbfb875226d2bb194 (/dev/oracle/ocrvote1) [OCRVOTE]
    2. ONLINE 85c05a5b30384f8dbff48cc069de7a7c (/dev/oracle/ocrvote2) [OCRVOTE]
    3. ONLINE 649196fbdd614f9cbf26a9a0e6670a6e (/dev/oracle/ocrvote3) [OCRVOTE]
    4. ONLINE 8815dfcee2e64f64bf00b9c76626ab41 (/dev/oracle/ocrvote4) [OCRVOTE]
    5. ONLINE 8ce55fe5534f4f77bfa9f54187592707 (/dev/oracle/ocrvote5) [OCRVOTE]
    Located 5 voting disk(s).
    Start of resource "ora.cluster_interconnect.haip" failed
    CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'sph1erp'
    CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
    Start action for HAIP aborted
    CRS-2674: Start of 'ora.cluster_interconnect.haip' on 'sph1erp' failed
    CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'sph1erp'
    CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'sph1erp' succeeded
    CRS-4000: Command Start failed, or completed with errors.
    Failed to start Oracle Clusterware stack
    Failed to start High Availability IP at /oracle/11.2.0/grid/crs/install/crsconfig_lib.pm line 1046.
    /oracle/11.2.0/grid/perl/bin/perl -I/oracle/11.2.0/grid/perl/lib -I/oracle/11.2.0/grid/crs/install /oracle/11.2.0/grid/crs/install/rootcrs.pl execution failed
    sph1erp:/oracle/11.2.0/grid #
    Last few lines from CRS Log for node 1, where error came
    [ctssd(6467)]CRS-2401:The Cluster Time Synchronization Service started on host sph1erp.
    2011-02-25 23:04:16.491
    [oracle/11.2.0/grid/bin/orarootagent.bin(6423)]CRS-5818:Aborted command 'start for resource: ora.cluster_interconnect.haip 1 1' for resource 'ora.cluster_int
    erconnect.haip'. Details at (:CRSAGF00113:) {0:0:178} in */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
    2011-02-25 23:04:20.521
    [ohasd(5513)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.cluster_interconnect.haip'. Details at (:CRSPE00111:) {0:0:178} in
    */oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
    Few lines from */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
    =====================================================================================================
    2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Starting Probe for ip 169.254.74.54
    2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Transitioning to Probe State
    2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} [NetHAMain] thread stopping
    2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} Thread:[NetHAMain]isRunning is reset to false here
    2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAMain]stop }
    2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} thread cleaning up
    2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} pausing thread
    2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} posting thread
    2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
    2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} [NetHAWork] thread stopping
    2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} Thread:[NetHAWork]isRunning is reset to false here
    2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
    2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
    2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
    2011-02-25 23:04:17.891: [ora.cluster_interconnect.haip][12] {0:0:178} [start] Start of HAIP aborted
    2011-02-25 23:04:17.892: [   AGENT][12] {0:0:178} UserErrorException: Locale is
    2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsnUtils::error Exception type=2 string=
    CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
    Start action for HAIP aborted
    2011-02-25 23:04:17.893: [    AGFW][12] {0:0:178} sending status msg [CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the foll
    owing error:
    Start action for HAIP aborted
    ] for start for resource: ora.cluster_interconnect.haip 1 1
    2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsn_agent::start }
    2011-02-25 23:04:17.894: [    AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
    2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check {
    2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check } - 0
    2011-02-25 23:04:19.573: [    AGFW][10] {0:0:154} Agent received the message: AGENT_HB[Engine] ID 12293:669
    2011-02-25 23:04:20.510: [ora.cluster_interconnect.haip][18] {0:0:178} [start] got lock
    2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] tryActionLock }
    2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] abort }
    2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] clsn_agent::abort }
    2011-02-25 23:04:20.511: [    AGFW][18] {0:0:178} Command: start for resource: ora.cluster_interconnect.haip 1 1 completed with status: TIMEDOUT
    2011-02-25 23:04:20.512: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init enter {
    2011-02-25 23:04:20.513: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init exit }
    2011-02-25 23:04:20.517: [    AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
    2011-02-25 23:04:20.519: [ USRTHRD][8] {0:0:178} Ocr Context init default level 23886304
    2011-02-25 23:04:20.519: [ default][8]clsvactversion:4: Retrieving Active Version from local storage.
    [   CLWAL][8]clsw_Initialize: OLR initlevel [70000]
    Few lines from */oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
    =====================================================================================================
    2011-02-25 23:04:21.627: [UiServer][30] {0:0:180} Done for ctx=6000000002604ce0
    2011-02-25 23:04:21.642: [UiServer][31] Closed: remote end failed/disc.
    2011-02-25 23:04:26.139: [ CLSINET][33]Returning NETDATA: 1 interfaces
    2011-02-25 23:04:26.139: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
    erconnect'
    2011-02-25 23:04:26.973: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
    2011-02-25 23:04:26.973: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
    DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
    2011-02-25 23:04:26.992: [UiServer][30] {0:0:181} processMessage called
    2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending message to PE. ctx= 6000000001b440f0
    2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending command to PE: 67
    2011-02-25 23:04:26.994: [   CRSPE][29] {0:0:181} Processing PE command id=173. Description: [Stat Resource : 600000000135f760]
    2011-02-25 23:04:26.997: [UiServer][30] {0:0:181} Done for ctx=6000000001b440f0
    2011-02-25 23:04:27.012: [UiServer][31] Closed: remote end failed/disc.
    2011-02-25 23:04:31.135: [ CLSINET][33]Returning NETDATA: 1 interfaces
    2011-02-25 23:04:31.135: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
    erconnect'
    2011-02-25 23:04:32.318: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
    2011-02-25 23:04:32.318: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
    DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
    2011-02-25 23:04:32.332: [UiServer][30] {0:0:182} processMessage called
    2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending message to PE. ctx= 6000000001b45ef0
    2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending command to PE: 68
    2011-02-25 23:04:32.334: [   CRSPE][29] {0:0:182} Processing PE command id=174. Description: [Stat Resource : 600000000135f760]
    2011-02-25 23:04:32.338: [UiServer][30] {0:0:182} Done for ctx=6000000001b45ef0
    2011-02-25 23:04:32.352: [UiServer][31] Closed: remote end failed/disc.
    2011-02-25 23:04:36.155: [ CLSINET][33]Returning NETDATA: 1 interfaces
    2011-02-25 23:04:36.155: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
    erconnect'
    2011-02-25 23:04:37.683: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
    2011-02-25 23:04:37.683: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
    DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
    2011-02-25 23:04:37.702: [UiServer][30] {0:0:183} processMessage called
    2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending message to PE. ctx= 6000000002604ce0
    2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending command to PE: 69
    2011-02-25 23:04:37.704: [   CRSPE][29] {0:0:183} Processing PE command id=175. Description: [Stat Resource : 600000000135f760]
    2011-02-25 23:04:37.708: [UiServer][30] {0:0:183} Done for ctx=6000000002604ce0
    2011-02-25 23:04:37.722: [UiServer][31] Closed: remote end failed/disc.
    2011-02-25 23:04:41.156: [ CLSINET][33]Returning NETDATA: 1 interfaces
    2011-02-25 23:04:41.156: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
    erconnect'
    What could be the issue ????
    Experts Please help me. Doing setup for the PRoduction Env...
    Do response ASAP...... Thanks
    Regards,
    Manish

  • Failing PATH pre-requisite check installing 11g client

    Greetings -
    I'm trying to install the 32bit oracle 11g database client on Win 7 Professional x64. I'm stuck with this error when the installer gets to the "Perform Prerequisite Checks" step:
    Environment variable: "PATH" - This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
    Details:
    -      PRVF-3919 : Failed to retrieve value of environment variable "PATH"
    - Cause: Environment variable value could not be determined.
    - Action: Check user equivalence and whether the user has administrative privileges on the node.
    Google tells me this might be related to an excessive PATH environment variable length, so I made multiple repetitions of "clean some crap out and try to install again" with no effect. Currently it is set to:
    C:\>path
    PATH=C:\Windows\system32;C:\Windows;
    And the installer still fails.
    I've tried explicitly running the installer via "Run as Administrator" and as a regular user (who is in the Administrators group). No change either way.
    Someone on my team suggested making sure the installation target path has no spaces in it. I'm keeping the default path suggested by the installer, which is
    D:\app\ladams\product\11.2.0\client_1
    where ladams is my Windows user name. I did some experimentation here, changing the install path to things like "D:\oracle" and that hasn't resolved the issue.
    Interestingly, if I open the installer log, I can find this line in it near the top:
    INFO: PATH has :==>C:\Users\ladams\AppData\Local\Temp\OraInstall2013-01-28_02-19-03PM\jdk\jre\bin;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;;;.
    So it can apparently read the path at some point before the pre-requisite check, although it seems to be doubling up the contents for some reason...
    Later on in the log file, I see this:
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:OPERATION_FAILED
    INFO: -----------------------------------------------
    Is there some way to work around this issue, or just skip the prerequisites check entirely? I found something on a blog via google about being able to pass a "-ignoreSysPrereqs" switch to the installer to bypass the check. When I tried that, the installer still performed it's checks, and failed with the same error, so apparently that was bad info...
    Any help would be appreciated.

    Thanks for the reply.
    I did indeed take a look at the client installation instructions here: http://docs.oracle.com/cd/E11882_01/install.112/e24282/toc.htm#BABGCIFF
    However, it appears to be out of date, or at least not applicable to my problem. Step 10 refers to an Ignore All button:
    "Note: Oracle recommends that you use caution in checking the Ignore All option. If you check this option, then Oracle Universal Installer may not confirm that your system is able to install Oracle Database successfully."
    I don't have an ignore all button. At least if there is, it's cleverly disguised. The only option I have after the check fails is "Cancel."
    Is there another section of the fine manual I should take a look at?
    Edited by: 984635 on Jan 28, 2013 6:09 PM
    Edited by: 984635 on Jan 28, 2013 6:17 PM

  • No pre-requisite checks found in oraparam.ini

    Hi,
    When I was trying to run the ./runInstaller(oracle 10g) on linux4,
    it was saying
    "Starting Oracle Universal Installer...
    No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed."
    can anyone please help me in finding the solution for that ?
    Thanks

    Hi user;
    Please be sure you have all pre-request,check
    http://www.oracle.com/pls/db102/homepage
    Also check below note:
    10g runInstaller (OUI) fails on startup with checkdir error: cannot create /oui/bin/ouica.sh [ID 263692.1]<<Solution part 2
    Regard
    Helios

  • Pre-Requisite Check SQL Server 2012 SP2 TCP Port Enabled Error

    When doing the pre-requisite check to install SCCM (CAS) using an instance of SQL Server 2012 SP2, you get the following error even though SQL Server TCP port has been enabled, set to static port 4022 on the IP addresses in use in SQL Server Configuration
    Manager under Protocols for <SQLInstanceName>: configuration manager primary site and central administration site require sql server tcp enables and set to static port
    To resolve this issue, make sure "4022" is also set in the IPAll node in SQL Server Configuration Manager under Protocols for <SQLInstanceName> then restart the SQL Service and re-run the pre-requisite check and you should be good to go.
    To avoid SCCM SQL-related install failure, keep in mind that SCCM SQL Service Broker (SSB) (used to replicate data between database sites) is set to port 4022 by default. This is different from and cannot be same as the tcp static port set in SQL Server
    Configuration Manager under Protocols for <SQLInstanceName>. For example SSB can use its default tcp port 4022 while a static tcp port of 4023 can be set in SQL Server Configuration Manager under Protocols for <SQLInstanceName> or vice-versa. The
    SCCM SSB port number can be adjusted during SCCM installation on the Database Information page. My take it so change SSB port to 4023 and leave SQL default port at 4022 since SQL serves potentially many apps while SSB is used within/by SCCM.
    If you are getting errors relating to SQL Server service running accounts, SQL Server Collation, and/or SQL Server sysadmin rights while attempting to install a primary site, unselect the SCCM installation option to install default settings at the beginning
    of the install process.
    Also, ensure to install important updates and restart the server.

    Thank you for sharing.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Pre-requisite check for client deletion.

    Dear Experts,
    We need to delete a client(Customizing client) from our Production system, this client is an additional one apart from our Productive client.
    Could anybody please enumerate the pre-requisite checks necessary to carry out before going ahead with deleting the client using SCC5. Any Rfc's to be taken care off, logical systems etc.
    Thanks in advance

    Hi,
      In addition to what Sunny said, Please check the below links as well in case if you would have not gone through them:.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCTS/BCCTS.pdf
    http://help.sap.com/saphelp_46c/helpdata/en/2e/d9530294f911d283d40000e829fbbd/content.htm
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCRRR/BCRRRSAA.pdf
    Thanks

  • 10gR2 Install Issue: "No pre-requisite checks found in oraparam.ini"

    Hello there
    I have recently created a virtual machine under VMWare 5 with a base Windows 2000 build on it.
    When I try and load the OUI for the 10gR2 install, the command box just tells:
    "No pre-requisite checks found in oraparam.ini"
    The OUI then proceeds to install the database.
    Why am I getting this warnig? The reason I ask is that I can't install the Companion CD becasue of this. The universal installer does not work for CD2!!!
    Any help much appreciated
    Duncan

    "No pre-requisite checks found in oraparam.ini"That is normal. For the operating system you are installing it on, there are no predefined pre-requisite steps that installer needs to verify (like libraries required, versions of components, software tools required etc).

  • Oracle 10g / RH9 : No pre-requisite checks found in oraparam.ini

    Hi,
    When I was trying to run the ./runInstaller on linux9,
    it was saying
    "Starting Oracle Universal Installer...
    No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed."
    can anyone please help me in finding the solution for that ?
    Thanks

    I don't think 10g will install on RH9 - you will need to get AS2.1 or 3.

  • Pre-requisite checker script for EBS R12 and R12.1

    hi
    is it possible to make a pre-requisite checker script (in perl or shell) for EBS R12 and R12.1 in RHEL5 or sun OS??
    can anyone help / guide me to do so??
    rgrds

    I don't know about EBS R12, but apparently the Oracle Universal Installer can use options to just run the prerequisite checks without having to install the product.
    E.g. /runInstaller -prereqChecker or -executeSysPrereqs
    There is also a specific OTN forum available for installing E-Business suite:
    LCM: 11i Install/Upgrade

  • CPO SAP Adapter pre-requisite Check Error

    TEO 2.3.5 SAP adpater Pre-requisite Error
             Trying to setup an SAP ABAP connection. Satisfied the pre-requisite of SAP NCO sapnco30dotnet40P_7-20007348, still get the following error while checking the pre-requisite.
    Unable to check for prerequisites:
    A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond
    This is what I see in the logs-
    /StackTrace><ExceptionString>System.ServiceModel.CommunicationObjectAbortedException: The communication object, System.ServiceModel.Channels.TransportReplyChannelAcceptor+TransportReplyChannel, cannot be used for communication because it has been Aborted.</ExceptionString></Exception></TraceRecord>
    ||735|2013/03/01 07:33:30.028|2084|PoolThread:57|||WCF: System.ServiceModel Error: 131075 :
    ||736|2013/03/01 07:33:30.029|2084|PoolThread:57|||WCF: <TraceRecord xmlns="
    http://schemas.microsoft.com/2004/10/E2ETraceEvent/TraceRecord
    " Severity="Error"><TraceIdentifier>http://msdn.microsoft.com/en-US/library/System.ServiceModel.Diagnostics.ThrowingException.aspx</TraceIdentifier><Description>Throwing an exception.</Description><AppDomain>Tidal.Automation.Server.exe</AppDomain><Source>System.ServiceModel.Channels.TransportReplyChannelAcceptor+TransportReplyChannel/59871390</Source><Exception><ExceptionType>System.ServiceModel.CommunicationObjectAbortedException, System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType><Message>The communication object, System.ServiceModel.Channels.TransportReplyChannelAcceptor+TransportReplyChannel, cannot be used for communication because it has been Aborted.</Message><StackTrace>   at System.ServiceModel.Channels.InputQueueChannel`1.EndDequeue(IAsyncResult result, TDisposable&amp;amp; item)
       at System.ServiceModel.Dispatcher.ErrorHandlingReceiver.EndTryReceive(IAsyncResult result, RequestContext&amp;amp; requestContext)
       at System.ServiceModel.Dispatcher.ChannelHandler.EndTryReceive(IAsyncResult result, RequestContext&amp;amp; requestContext)
       at System.ServiceModel.Dispatcher.ChannelHandler.AsyncMessagePump(IAsyncResult result)
       at System.Runtime.Fx.AsyncThunk.UnhandledExceptionFrame(IAsyncResult result)
       at System.Runtime.AsyncResult.Complete(Boolean completedSynchronously)
       at System.Runtime.InputQueue`1.AsyncQueueReader.Set(Item item)
       at System.Runtime.InputQueue`1.Shutdown(Func`1 pendingExceptionGenerator)
       at System.ServiceModel.Channels.CommunicationObject.Abort()
       at System.ServiceModel.Dispatcher.ListenerHandler.AbortChannels()
       at System.ServiceModel.Dispatcher.ListenerHandler.OnAbort()
       at System.ServiceModel.Channels.CommunicationObject.Abort()
       at System.ServiceModel.Dispatcher.ChannelDispatcher.OnAbort()
       at System.ServiceModel.Channels.CommunicationObject.Abort()
       at System.ServiceModel.ServiceHostBase.OnAbort()
       at System.ServiceModel.Channels.CommunicationObject.Abort()
       at Tidal.Automation.Server.WebService.WCFHost.StopServiceHost(Object state)
       at Tidal.Automation.Common.ThreadPool.OuterWaitCallBack(Object state)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
       at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
       at System.Threading.ThreadPoolWorkQueue.Dispatch()
       at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback()
    </StackTrace><ExceptionString>System.ServiceModel.CommunicationObjectAbortedException: The communication object, System.ServiceModel.Channels.TransportReplyChannelAcceptor+TransportReplyChannel, cannot be used for communication because it has been Aborted.</ExceptionString></Exception></TraceRecord>
    ||737|2013/03/01 07:33:30.164|2508|MainEngineThread|||Encountered an exception while attempting to kill adapter SAP Solution Manager Adapter (95151695-aacc-4310-af5f-c38abfcea384).  Proceeding.
    ||738|2013/03/01 07:33:30.164|2508|MainEngineThread|||EXCEPTION (Tidal.Automation.Common.Product.RhapsodyException): An attempt was made to stop the adapter named 95151695-aacc-4310-af5f-c38abfcea384 but it appears to have never been started.
    Stack Trace:   at Tidal.Automation.Engine.Core.AdapterStarter.KillAdapter(Guid adapterId)
       at Tidal.Automation.Engine.Core.AdapterLifecycleManager.DisableAdapterStartups()
    ||739|2013/03/01 07:33:30.165|2508|MainEngineThread|||Encountered an exception while attempting to kill adapter SAP ABAP Adapter (cf6f0f84-a364-4105-b11f-0fef62873b37).  Proceeding.
    ||740|2013/03/01 07:33:30.165|2508|MainEngineThread|||EXCEPTION (Tidal.Automation.Common.Product.RhapsodyException): An attempt was made to stop the adapter named cf6f0f84-a364-4105-b11f-0fef62873b37 but it appears to have never been started.
    Stack Trace:   at Tidal.Automation.Engine.Core.AdapterStarter.KillAdapter(Guid adapterId)
       at Tidal.Automation.Engine.Core.AdapterLifecycleManager.DisableAdapterStartups()
    ||741|2013/03/01 07:33:30.221|2508|MainEngineThread|||Encountered an exception while attempting to kill adapter SAP Solution Manager Adapter (95151695-aacc-4310-af5f-c38abfcea384).  Proceeding.
    ||742|2013/03/01 07:33:30.221|2508|MainEngineThread|||EXCEPTION (Tidal.Automation.Common.Product.RhapsodyException): An attempt was made to stop the adapter named 95151695-aacc-4310-af5f-c38abfcea384 but it appears to have never been started.
    Stack Trace:   at Tidal.Automation.Engine.Core.AdapterStarter.KillAdapter(Guid adapterId)
       at Tidal.Automation.Engine.Core.AdapterLifecycleManager.DisableAdapterStartups()
    ||743|2013/03/01 07:33:30.222|2508|MainEngineThread|||Encountered an exception while attempting to kill adapter SAP ABAP Adapter (cf6f0f84-a364-4105-b11f-0fef62873b37).  Proceeding.
    ||744|2013/03/01 07:33:30.222|2508|MainEngineThread|||EXCEPTION (Tidal.Automation.Common.Product.RhapsodyException): An attempt was made to stop the adapter named cf6f0f84-a364-4105-b11f-0fef62873b37 but it appears to have never been started.
    Stack Trace:   at Tidal.Automation.Engine.Core.AdapterStarter.KillAdapter(Guid adapterId)
       at Tidal.Automation.Engine.Core.AdapterLifecycleManager.DisableAdapterStartups()

    Please open a TAC case.  They can not only get you past the missing prerequisite, but also raise the issue on the bad prerequisite detection error which you are seeing so we can get it fixed in the product.

  • Cluvfy pre dbconfiguration check fails

    hello friends
    I am installing RAC 10g database using a 2 node cluster
    I have successfully installed the Oracle Clusterware, Oracle Database software, Oracle Companion CD software, and also configured listeners on both nodes ( viz.linux1, linux2) on both the nodes.
    when I run the cluvfy utility as oracle user who is member of the oinstall and dba groups:
    ./runcluvfy.sh stage -pre dbcfg -n linux1,linux2 -d ${ORACLE_HOME} -verbose
    it returns
    oracle home {u01/app/oracle/product/10.2.0/db_1} does not exist
    Administrative Privileges check failed
    all the cluvfy checks for all previous stages ran ok
    what is the problem here
    please respond. also tell me of any more infornmation that I should provide
    Regards
    Kuber

    oracle home {u01/app/oracle/product/10.2.0/db_1} does not existCan you confirm your ORACLE_HOME path?
    Thanks

  • Oracle 11g Database Prerequisites Check Failed

    hi all, i need to install the oracle 11g database on my D drive but the check was failed where the check take place in C drive. Therefore, i just skipped it.
    I do meet all the requirement but still failed, why ?
    During the oracle database 11g, there are some components which cannot be found like em.war, em.ear, drluln.sql.sbs, system-application.xml, system-jazz-data.xml .
    What is the error about ?
    Is it possible to install ?
    Thanks.
    Edited by: peterwkc on Mar 19, 2011 3:19 AM

    schavali wrote:
    Pl post details of your OS version, along with which 11g version you are trying to install. Are you following the steps in the official installl Guides - http://www.oracle.com/technetwork/database/enterprise-edition/documentation/database-093888.html ?
    I am not sure why you are acting surprised that the install was not successful when you are ignoring install warnings/errors :-)
    As indicated in the thread link above, have you downloaded and unzipped both of the install zip files into the same directory ?
    Pl also post relevant sections from the install log that show what prereq checks have failed.
    HTH
    SriniI copied the disk 2 component into disk 1 component folder where the installation is successful but prerequiresite still failed where i just ignore where i have set all the env variable.
    By the way, thanks for your reply.

  • Swap Space error in pre requisite check of NWDS2004(Support Pack18)install

    Hi,
    Trying to install NWDI SP 18 (SAP Netweaver Developer Workplace ) trial version on my machine with Windows XP.
    The installation (after installing J2EE Engine + MaxDB + NWDS 2004 etc), it has thrown some error regarding page size.
    So when we check the pre requisites for the installation of the software, it is giving the below error that the swap size needs to be increased.
    ==============================================
    Condition:- Swap Size
    Result Code:- Condition not met
    Severity:- HIGH
    Message:- For the selected services atleast 7135 MB swap space recommeneded.Current value 3921 MB(updated 2005-06-24)
    =============================================
    Please anybody let me know if there is a way to increase the swap size and fix the issue at the earliest.

    Hi Gandhi,
    Right click my on computer ->Select Properties -> Click Advanced Tab ->Click Settings (performance) -> Select Advanced Tab -> In virtual memory -> Change ; You canIncrease swap space/page file here.
    regards
    Juan
    Please reward with points if helpful

  • User equivalence check failed in solaris 10

    Hi,
    i am trying to install oracle clusterware on solaris10.
    when i executed clusture varification utility , user equivalence test is failed.
    each node have same username,userid,group id
    and i configured SSH also using
    exec /user/bin/ssh-agent
    /usr/bin/ssh-add after generation of rsa and dsa keys and putting this to authorization file.
    it is not asking password for ssh and scp after executing this command but again user equivalence check failed
    but after logging of and do login again to oracle user its not working. then again i have to set ssh that is
    exec /user/bin/ssh-agent
    /usr/bin/ssh-add
    wat else i have to check for this?
    can sombody help me to solve this

    Umesh Gupta wrote:
    Thay are same, i have already taken care of that..
    Node1:-
    $ id oracle
    uid=101(oracle) gid=300(oinstall)
    Node2:-
    $ id oracle
    uid=101(oracle) gid=300(oinstall)
    Please suggest..
    Regards
    Umesh$exec /usr/bin/ssh-agent $SHELL
    $/usr/bin/ssh-add
    on any one of the nodes
    and check the output of cluvfy
    also refer the link:-
    http://download.oracle.com/docs/cd/B28359_01/install.111/b28263/crsunix.htm#BEHIHBBF
    User equivalence check failed (RAC setup)
    Edited by: rajeysh on Aug 18, 2011 7:09 PM

  • Oracle 11g r1 install check fails on - Red Hat 5

    I'm getting the below check failures -
    Checking for glibc-devel-2.3.4-i386; Not found.     Failed <<<<
    Checking for glibc-devel-2.3.4-x86_64; Not found.     Failed <<<<
    Checking for gcc-c++-3.4.5; Not found.     Failed <<<<
    Everything else is ok, can any help  or suggest and resolution on this, I have tried to look for all the packages on all the Linux CD's and nothing there, I think these may have been updated not sure (new to Linux/Oracle).
    Full check output:
    Checking operating system requirements ...
    Expected result: One of enterprise-4,enterprise-5,redhat-4,redhat-5,SuSE-10,asianux-2,asianux-3
    Actual Result: redhat-4
    Check complete. The overall result of this check is: Passed
    ========================================================
    Checking operating system package requirements ...
    Checking for make-3.80; found make-1:3.81-3.el5-x86_64.     Passed
    Checking for binutils-2.15.92.0.2; found binutils-2.17.50.0.6-12.el5-x86_64.     Passed
    Checking for gcc-3.4.5; Not found.     Failed <<<<
    Checking for libaio-0.3.105-i386; found libaio-0.3.106-3.2-i386.     Passed
    Checking for libaio-0.3.105-x86_64; found libaio-0.3.106-3.2-x86_64.     Passed
    Checking for libaio-devel-0.3.105; found libaio-devel-0.3.106-3.2-x86_64.     Passed
    Checking for libstdc++-3.4.5-i386; found libstdc++-4.1.2-46.el5-i386.     Passed
    Checking for libstdc++-3.4.5-x86_64; found libstdc++-4.1.2-46.el5-x86_64.     Passed
    Checking for libstdc++-devel-3.4.5; found libstdc++-devel-4.1.2-46.el5-x86_64.     Passed
    Checking for sysstat-5.0.5; found sysstat-7.0.2-3.el5-x86_64.     Passed
    Checking for libgcc-3.4.5-i386; found libgcc-4.1.2-46.el5-i386.     Passed
    Checking for libgcc-3.4.5-x86_64; found libgcc-4.1.2-46.el5-x86_64.     Passed
    Checking for elfutils-libelf-0.97; found elfutils-libelf-0.137-3.el5-i386.     Passed
    Checking for elfutils-libelf-devel-0.97; found elfutils-libelf-devel-0.137-3.el5-i386.     Passed
    Checking for glibc-common-2.3.4; found glibc-common-2.5-42-x86_64.     Passed
    Checking for glibc-devel-2.3.4-i386; Not found.     Failed <<<<
    Checking for glibc-devel-2.3.4-x86_64; Not found.     Failed <<<<
    Checking for gcc-c++-3.4.5; Not found.     Failed <<<<
    Checking for compat-libstdc++-33-3.2.3-i386; found compat-libstdc++-33-3.2.3-61-i386.     Passed
    Checking for compat-libstdc++-33-3.2.3-x86_64; found compat-libstdc++-33-3.2.3-61-x86_64.     Passed
    Check complete. The overall result of this check is: Failed <<<<
    Problem: Some packages required for the Oracle Database 11g to function properly are missing (see above).
    Recommendation: Install the required packages before continuing with the installation.
    ========================================================
    Checking kernel parameters
    Checking for semmsl=250; found semmsl=250.     Passed
    Checking for semmns=32000; found semmns=32000.     Passed
    Checking for semopm=100; found semopm=100.     Passed
    Checking for semmni=128; found semmni=128.     Passed
    Checking for shmmax=536870912; found shmmax=68719476736.     Passed
    Checking for shmmni=4096; found shmmni=4096.     Passed
    Checking for shmall=2097152; found shmall=4294967296.     Passed
    Checking for file-max=65536; found file-max=65536.     Passed
    Checking for VERSION=2.6.9; found VERSION=2.6.18-164.el5.     Passed
    Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=1024 - 65000.     Passed
    Checking for rmem_default=4194304; found rmem_default=4194304.     Passed
    Checking for rmem_max=4194304; found rmem_max=4194304.     Passed
    Checking for wmem_default=262144; found wmem_default=4194304.     Passed
    Checking for wmem_max=262144; found wmem_max=4194304.     Passed
    Check complete. The overall result of this check is: Passed
    ========================================================
    Checking Recommended glibc version
    Expected result: ATLEAST=2.3.4-2.19
    Actual Result: 2.5-42
    Check complete. The overall result of this check is: Passed
    ========================================================
    Checking physical memory requirements ...
    Expected result: 922MB
    Actual Result: 1960MB
    Check complete. The overall result of this check is: Passed
    ========================================================
    Checking available swap space requirements ...
    Expected result: 2940MB
    Actual Result: 3935MB
    Check complete. The overall result of this check is: Passed
    ========================================================
    Checking Network Configuration requirements ...
    Check complete. The overall result of this check is: Not executed <<<<
    Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
    ========================================================
    Checking PATH environment variable...
    Check complete. The overall result of this check is: Passed
    ========================================================
    Checking for sufficient diskspace in TEMP location...
    Check complete. The overall result of this check is: Passed
    ========================================================
    Checking LD_LIBRARY_PATH environment variable...
    Check complete. The overall result of this check is: Passed
    ========================================================
    Validating ORACLE_BASE location (if set) ...
    Check complete. The overall result of this check is: Passed
    ========================================================
    Checking Oracle Home path for spaces...
    Check complete. The overall result of this check is: Passed
    ========================================================
    Checking for proper system clean-up....
    Check complete. The overall result of this check is: Passed
    ========================================================
    Checking for Oracle Home incompatibilities ....
    Actual Result: NEW_HOME
    Check complete. The overall result of this check is: Passed
    ========================================================
    thanks
    Dee

    If you are sure you have newer versions you may try
    runInstaller -ignoreSysPrereqs .
    That bypasses the pre-checks. But there's a risk even more severe errors will occur later.
    Werner

Maybe you are looking for

  • Unable to open video project in Soundtrack

    Neophyte FCE 3.5 user, now have high def movie on timeline which needs some audio editing. Tried to open project in Soundtrack (which came with FCE 3.5) but project name is "grayed out" & won't open. Not really sure whether I should be editing audio

  • Please help - I can not create large arrays of images (no more than 108 elements)

    Hello, I am working in an application where i acquire 300 high resolution images (3Mp) and then i process each of those frames. When i try to put alll those frames in one array of images, the system does not let me more than 108 elements. There is no

  • UoM at sales order is EA...

    Hi, UoM at sales order is EA. while at delivery, I want to display UoM as KG & again at invoice it should be EA. How to configure this? considering 1 EA = 1 KG as conversion maintained at Mat Master. Br, Bala.

  • Can't open PSD's in PS.

    I have CS5 64 upgrade.  Recently removed CS4 and now bridge or other programs will not alow me to open any image with PS.  Can open non-PSD's with Camera Raw and then open in PS but since I save images as PSD doesn't help much.  Any help would be app

  • Mac os X often crashed

    Hi guys, does anybody here knows whats wrong with my imac? i bought my imac in february '09 but not the newest one. Everytime i want to quit few applications at the same time such as, Logic pro 8, reason 4, my mac os x always crashed which a black sc