All  8 ODS   loads  are failing in Process chains

Hi Experts,
Today in Production ,all  8Z<ODS>  ( eg. 8ZSD_O51, 8ZSDC_53,8ZCOPABC02.......) giving same error in Extraction .
It is "Error occured in data selection" in Extraction tab in details tab in RSMO.
We are correcting these loads by deleting this red requests from data target and running the Infopackage manually for repeat of last delta.when we run infopackage manually it doesn't fail.but it give above error while loading in Process Chain.
So in our Batch we have around 30-40 loads of this type( 8Z load).So to run each info package manually it is time consuming process??
So pls give suggestions to correct this error.....
How can we fix this problem........
the error is coming only after some support pack installed in BW two day before.
Thanx in advance...

Hi,
are you In DEV or Prod? If in prod, did you have this behavior in your DEV sys as well after applying your SP?!?
try replicating your "myBW" datasources and reactivating your transfer structures;
Try first with one of it; test and see if this works; then run RS_TRANSTRU_ACTIVATE_ALL to activate all your transfer structures.
hope this helps...
Olivier.

Similar Messages

  • Loadihng from ODS to Cube failed in process chain

    Hi All,
    I have a process chain for SD loads scheduled every night. It gave me an error while loading data from Billing ODS to Billing Cube(via Further Processing, and the data is not available in PSA).
    The error it gave is as follows:
    Error while updating data from DataStore object ZSD_O03
    Error 7 when sending an IDoc
    Time limit exceeded. 3
    Time limit exceeded.     
    Errors in source system
    Now the request is loaded in Cube(YELLOW status) with transfered records 87125 and added 62245. But there is no way by which we can check if the complete data has come to the cube.
    i did not delete the previous request from the cube  and tried to repeat the process chain from the same point...it then gave me the following error:
    -Last delta incorrect. A repeat must be requested. This is not possible.
    Please tell me now what should I do...i don't have to miss the delta records in the cube.
    1)Should I delete the prevous loaded request in cube and repeat the process chain from the same point...will it get all the delta records in that case???
    2)Should I delete the request from cube and manually repeat the last delta for the cube. and then manually load the remaining process chain.
    please help me out soon..
    Thanks and Regards,

    Hello Niyati
    you can use 2nd option
    Your error message is comming because of lack of BGD process and memory....just set the status of request in cube to red, delete it, and run a repeat load from infopackage.....
    If no. of records are high than just go for the option of "load data in PSA and than subsequently in data target"
    in infopackage
    Thanks
    Tripple k

  • Can you delete ODS indexes before loading each time in Process Chain

    Can you delete ODS indexes before loading eachin time in Process Chain and rebuild them just like a cube.And do you have to delete the indexes if its a daily refresh where data is deleted and a full update is done everyday.

    Hi,
    Are you using Secondary Indices on the ODS objects. I thought the Primary Index (which is also the Key Part of the ODS) is automatically updated during the Data Activation in the ODS. I am not sure if the Secondary Indicies are also automatically updated by the system.
    Naga

  • A former employee has returned a 17" MBP and cleared the OS. All attempts to reinstall are failing, start up disc, repower C pressed, Cmd-R etc - anyone any ideas?

    A former employee has returned a 17" MBP and cleared the OS. All attempts to reinstall are failing, start up disc, repower C pressed, Cmd-R etc - anyone any ideas?

    Did you have the original OS installation disk?  If not, call Apple Customer relations and provide them with the MBP serial number (on the bottom) and they will send you replacements.  There is a charge.
    If this is a late 2011 MBP, the it came with Lion installed.  Try accessing the Apple servers with OPTION COMMAND R keys held down at start up.  The display should show a picture of a globe.  Proceed accordingly.  If no success, call Apple as already described.
    Ciao.

  • Master Data attributes failed in Process chain

    Hi All,
    Master data load has failed at vendor attributes DELTA load, and error message is "'Update mode R is not supported by the extraction API".
    Actually in the last PC delta run it was failed at same vendor attributes delta run, due to special characters, we allowed those special characters in RSKC transaction and technically made PSA red request to RED after that In order to Run the PC, We selected that Red request in PSA (Which has the records) and updated with Scheduler. PC ran well after that.
    and today PC got failed at same place showing he message as "'Update mode R is not supported by the extraction API".
    There are no red requests in data source (Info course), and No delta's missed.
    Can anyone please let us know the why it is happening ? (solution is we can re-init it or got options to run it) but we are looking for why this issue is happening ?
    All inputs are much appreciated.
    Thanks in advance,
    Teena

    Hi Teena,
    You get this type of error when the data source does not support repeat of delta
    or
    init flag might have corrupted some times so that it wont allow the delta load to run.
    it happens because the DS does not support R or Repeat of delta.
    For more information on Update mode:
    Go to SE12, write data type as "RODMUPDMOD". Read the documentation given there.
    You can try multiple options to resolve this.
    Simply set the QM status of the last failed delta to GREEN and reload your master data with Full Repair. Your deltas will follow.
    the best way for this situation would be to re-init.
    Regards
    Kp

  • Load balancing in the process chains

    HI friends
    I have 6 subchains in 1 metachain . we are facing a problem  where we have to 2 servers . but when we run the process chains they are  occuping all the DIA process  in only one server . the other server is empty . so is there a way  that we can do the load balancing in the process chains . so that the process chains can occupy all the resources in both servers than only one . please do reply . this is very important . thankyou  for all your replies .
    *Points will be rewarded *.

    Hi,
    check this out: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_ccm/~form/handler
    additionally some information.
    You can specify a server on which the chain will run, but this is not really load balancing. Load balancing must be set up by a basis person.
    regards
    Siggi

  • Rollup process failing in process chain

    Hi All,
    Daily the rollup processin in our process chain failing due to  the fallowing error
    "ORA-01400: cannot insert NULL into
    ("SAPBIW"."/BIC/E100093"."KEY_100093U") "
    But once we repeat the rollup process in the process chain it is getting successfull.
    Can you suggest solution for this error.
    Thanks
    Suneel

    Hi Suneel,
    As correctly mentioned by other to check logs and PSA data, you shour also check notes available on this error.
    Probabaly some data in a field is causing this error, so need to analyize the values which are coming.
    There are few notes on this:
    ORA-1406 error/ ORA-1400 Cannot insert NULL
    SAP Note Number: 211617
    Hope it helps...
    Regards,
    Ashish

  • DB statistics failed in Process Chains

    Hi BI Experts,
    We are maintaining 6 process chains in our system.
    Today every job was running successfully.
    But in every process chains, the DB STATISTICS are failed.When I check in the performance tab , it shows green.
    So i could not solve this problem.
    The log message is:
        The exception 'CX_SDB_ORA_PROGRAM_ERROR' was raised, but it was not caught
         anywhere along
        the call hierarchy.
        Since exceptions represent error situations and this error was not
        adequately responded to, the running ABAP program
         'CL_SDB_ORA_UPDATE_STATS=======CP' has to be
        terminated.
    Please can anyone tell me the process.
    Thanks in advance.
    Regards
    Anjali

    Hi Anjali,
    Check the OSS Note 998904 - Statistics check shows red or yellow traffic lights.
    I am pasting the contents of the Note here:
    Symptom
    After an update statistics run, the check (in transaction RSRV or transaction RSA1--> Manage) continues to show yellow or red traffic lights.
    Other terms
    RSDU_ANALYZE, analyze, statistics, yellow traffic light, red traffic light, performance, RSRV, incorrect statistics, manage
    Reason and Prerequisites
    This problem is caused by a program error.
    Solution
    The check for current statistics on InfoCubes contains a static time query and as a result of this, statistics are incorrectly displayed as 'not current'. This is just a display problem.  After an update statistics run, the statistics are actually up to date.
    SAP NetWeaver 2004s BI
               Import Support Package 10 for SAP NetWeaver 2004s BI (BI Patch 10 or SAPKW70010) into your BI system. The Support Package is available once Note 914304 "SAPBINews BI 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
    In urgent cases, you can implement the correction instructions.
    You must first implement Notes 932065, 935140, 948389, 964580 and 969846, which provide information about transaction SNOTE. Otherwise, problems and syntax errors may occur when you deimplement some notes.
    To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version".
    Before you implement an advance correction (if one exists and you want to implement it), see Note 875986. It contains notes regarding the SAP Note Assistant. These notes prevent problems during the implementation.
    Bye
    Dinesh

  • Code to fail a Process Chain

    Hello everybody,
    I am using a ABAP Program in a Process Chain ( Chain of Processes that load data to the BW Cube). I do some check in the Program. If the check is OK, then I will continue with the Process Chain. If the Check Fails, then I should fail the Process Chain.
    How do I accomplish this? If you can give me Piece of code, that will be very helpful.
    Thanks in advance.
    Shameem

    Hi Shameem,
    Plss Set the value of the sy-subrc to a non zero value so that the ABAP program step in Process Chain turns RED and Hence the Process Chain will stop.
    Shreya

  • Loading master data through process chain

    Hi Gurus
    I am designing the process chain , I know that I have to start by loading master data first for that I am planning to load attribute first and then to load text and then Hierarchy. Is that the right sequence?
    Also how can I make sure that once the master data is loaded , the transaction data loading start automatically?
    I am planning to put attribute chage run as last process in every master data loading . Is that correct?
    Also i would appreciate if you can tell me the very first step I should follow to start my design, I have already identified the master data and transaction data and their respective dependancies.what would be my next step?
    Thanks for your help in advance.
    Kris

    Hi Kris,
    Make two seperate Process Chains for Master Data and Transaction Data
    For Master Data:
    Your sequence is absolutly correct, Identify what all Master Data Objects and make a list of InfoPackages and Start creating Process Chain as
    Start --> Attribute --> Text --> Hier --> Attr Change Run
    For Transactional Data:
    Identify the Data Targets and the Sequence of loading, then create the Process Chain
    NOTE: Always Master Data should be loaded before Transaction Data
    After Creating different Chains for Master Data and Transaction Data, Make a one Super Chain called Meta Chain where you can put all these process chains,
    Meta Chain  --> Process Chain 1( Master Data Chain) --> Process Chain 2( Transaction Data)
    also check these threads for process chain creation
    Re: Process Chain : Master Data
    Re: process chains ?
    Hope this helps,
    Sudhakar.

  • BI Loads are failing still due to PXA_NO_FREE_SPACE ABAP Runtime error

    Dear All,
    Now BI loads (Background jobs) keep on failing due to ABAP Runtime error PXA_NO_FREE_SPACE .
    Kindly suggest what could be done from BASIS Side and what we have to suggest to BI team  regarding this error.
    we know that  this issue is caused due to memory issue .
    Error log:
    Runtime Errors         PXA_NO_FREE_SPACE
    Date and Time          11.01.2012 03:31:26
    Short text
         No PXA storage space available at the moment.
    What happened?
         The current ABAP/4 program had to be terminated because there
         was no space available to load it.
         Each ABAP/4 program to be executed is stored in a central
         storage area that is divided between all users.
         This area was too small to hold all currently active programs for all
         users.
         Resource bottleneck
         The current program "SAPMSSY1" had to be terminated because
         a capacity limit has been reached.
    Error analysis
        Unable to load a program of 210944 bytes.
        The PXA ('program execution area') was too small to hold all
        currently active programs for all users.
        At present, the size of the PXA is set at 739716 Kbytes.
        The largest contiguous and unlocked memory chunk has 0 bytes.
    Kindly suggest
    Edited by: satheesh0812 on Jan 11, 2012 6:05 AM

    SM 37 : error logs
    Job log overview for job:    BI_PROCESS_ABAP / 05011409
    Date       Time     Message text
    11.01.2012 05:01:15 Job started
    11.01.2012 05:01:15 Step 001 started (program RSPROCESS, variant &0000000044779, user ID BOMANV)
    11.01.2012 05:01:15 Start process ABAP VOWD_DEF in run DC1FFOSO3P5W71AWD6DGN6ZHT of chain ZGPC_BPC_APD
    11.01.2012 05:01:15 Start program RSAN_PROCESS_EXECUTE with program variant VOWD_DEF
    11.01.2012 05:02:05 Internal session terminated with a runtime error (see ST22)
    11.01.2012 05:02:05 Job cancelled
    Job log overview for job:    BI_PROCESS_CHAIN / 03001401
    Date       Time     Message text                                                                          M
    11.01.2012 03:00:15 Job started
    11.01.2012 03:00:15 Step 001 started (program RSPROCESS, variant &0000000012437, user ID LOGAPPS_1)
    11.01.2012 03:00:15 Start process CHAIN ZGPC_MM_MD in run DC1EQ1EWL57MN9QSJSXDBGF8X of chain ZGPC_MM_META
    11.01.2012 03:00:24 Internal session terminated with a runtime error (see ST22)
    11.01.2012 03:00:24 Job cancelled
    Thanks

  • BP daily load failed in process chain

    Hi,
    I am using process chains for daily loading of master data. I have an infopackage scheduled in that process chain named 0BP_DEF_ADDRESS_ATTR_INIT/DELTA_CRM01   (ZPAK_48WV8918R85SEUHG8N1IP6DJQ) . This infopackage is showing an error. When i diagnosed it says "Second attempt to write record '0030368557' to /BI0/PBPARTNER was successful"
    And during error analysis i found this is causing the error.
    Has anybody come across this error? How to correct this?
    Appreciate your valuable responses.
    Thanks
    Ashok

    Thanks.
    I deleted the request on Requests tab. However the request still runs on the reconstruction tab and when i manually try to do a delta load it says the last load is not finished yet.
    Could you please suggest?
    Thanks

  • Delta Failed in Process Chain

    Hi BW Experts,
    Our MM process Chain (Transaction Data)is running daily at 11:55PM in the night time.
    But today it is still running. I know this process chain will be failed . If we do not solve the issue today, delta package will not run tomorrow. Is it correct?
    Please give me the solution.
    Thanks & Regards,
    Anjali

    Hi,
    • This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
    Whenever we are loading the Master Data for the first time, it creates SID’s. If system is unable to create SID’s for the records in the Data packet, we can get this error message.
    If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
    Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
    If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
    It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
    It is a system error which can be seen under the “Status” tab in the Job Over View.
    Pls assaign the points if possible.
    Regards,
    Raghavendra Rao.Kolli

  • DTP failed in process chain...

    Hi All,
    Process chain of master data got failed in DTP, the error message is :
    " Second attempt to write record "XXXXXXXrec number XXXX" failed. "
    waiting for the reponse.
    Regds,
    Zakir

    HI Zakir,
    Dont check the option Handle duplicate records.If iam correcti thik you are trying to load the master data again by deleting the data.When you tried to delete the data the complete data may not have deleted.
    First Alternative:-
    Iknow you may not have authorisation for se14 if is is there please delete all the P ,q and M tables in SE14.Then try to load the DTP
    Second:-
    If you open the monitor of the failed DTP and go into the details tab and drill the erro and when you  right click on of the step on one of the failed step there you will set keydate/timestamp select that and then delete the request activate the DTP again and try to load.
    Third:-
    Its better to delete the DTP and Create it once agian.
    let me know if it has worked.
    Regards,
    Vikram

  • Issue while loading Master Data through Process Chain in Production

    Hi All,
    We are getting an error in Process chain while loading Master Data
    Non-updated Idocs found in Source System
    Diagnosis
    IDocs were found in the ALE inbox for Source System that are not updated.
    Processing is overdue.
    Error correction:
    Attempt to process the IDocs manually. You can process the IDocs manually using the Wizard or by selecting the IDocs with incorrect status and processing them manually.
    I had checked the PSA also but I could not find any record and the strange thing is, Job itself is not getting scheduled. Can any one help me out in order to resolve this issue.
    Regards
    Bhanumathi

    Hi
    This problem is not related to Process chain..
    u can try this..
    In RSMO, select the particular load you want to monitor.
    In the menu bar, Environment >>> Transact. RFC >>> Select whichever is required, BW or Source System.
    In the next screen you can select the Execute button and the IDOCS will be displayed.
    Check Note 561880 - Requests hang because IDocs are not processed.
    OR
    Transact RFC - status running Yellow for long time (Transact RFC will be enabled in Status tab in RSMO).
    Step 1: Goto Details, Status get the IDoc number,and go to BD87 in R/3,place the cursor in the RED IDoc entroes in tRFC
    queue thats under outbound processing and click on display the IDOC which is on the menu bar.
    Step 2: In the next screen click on Display tRFC calls (will take you to SM58 particular TRFC call)
    place the cursor on the particular Transaction ID and go to EDIT in the menu bar --> press 'Execute LUW'
    (Display tRFC calls (will take you to SM58 particular TRFC call) ---> select the TrasnID ---> EDIT ---> Execute LUW)
    Rather than going to SM58 and executing LUW directly it is safer to go through BD87 giving the IDOC name as it will take you
    to the particular TRFC request for that Idoc.
    OR
    Go into the JOB Overview of the Load there you should be able to find the Data Package ID.
    (For this in RSMO Screen> Environment> there is a option for Job overview.)
    This Data Package TID is Transaction ID in SM58.
    OR
    SM58 > Give * / user name or background (Aleremote) user name and execute.It will show you all the pending TRFC with
    Transaction ID.
    In the Status Text column you can see two status
    Transation Recorded and Transaction Executing
    Don't disturb, if the status is second one Transaction Executing. If the status is first one (Transation Recorded) manually
    execute the "Execute LUWs"
    OR
    Directly go to SM58 > Give * / user name or background (Aleremote) user name and execute. It will show TRFCs to be executed
    for that user. Find the particular TRFC (SM37 > Req name > TID from data packet with sysfail).select the TrasnID (SM58) --->
    EDIT ---> Execute LUW
    (from JituK)
    Hope it helps
    Darshan

Maybe you are looking for