All Ace members and Oracle forum moderators/administrators

Dont you guys think that we need a way to stop threads once the problem is resolved as per the user who posted the question ?
Regards,
http://askyogesh.com

I understand, my aims was, instead of just saying what is your OS or what is your Oracle version, one could say, this differce on OS to OS and Oracle version to Oracle version and giving little hint/answer to the question.Assume that there for example n different OS and n different versions of Oracle SW.
Somebody ask the question (reason of problem is specific for OS or version of DB) and don't provide OS version and DB version.
Means that you will give him n hints/answers? Probably no.
There is problem people creating topics with lack description of problem/question. Bad subject "Urgent!!!! I need help!!!" instead of "Frequent ORA-xxxxxx errors on 9.x.x.x"
or description "My database suddenly crashed. Why?" instead of detailed description including OS, DB version and errors from alert log.
If someone didn't provide useful information I will ask for it but I won't writing "novel" to my post.

Similar Messages

  • An Appeal to all Hon'ble Ace Members

    Respected All Ace Members,
    With humble request, I would like to request all Ace Members and Top Users in the forum to provide following source of knowledge on Oracle:
    1. Free Book
    2. Online / Chat Support
    3. Article
    4. White Paper
    5. Key Note
    6. Troubleshoot
    7. Ace Experience
    8. Expert’s conversation Room
    9. How to
    10. Blogs
    11. Archival
    12. Tip & Tricks
    If you provide above mentioned dozen, source of knowledge; here are demerit which may be:
    1.     It may decrease the sale of priced books.
    2.     It may decrease the revenue to metalink.
    3.     It may decrease the sale of priced study material, sold by Oracle University.
    4.     It may cause of highlighting the lacks and mistakes left in oracle documentation.
    5.     It may be cause of lowering the sale of third party tools.
    But;
    If you provide above mentioned dozen, source of knowledge; here are sure merits:
    1. Factors, who are working for decrease the popularity of oracle, will suddenly surrender.
    2. It will boost user base in term of quantity and quality.
    3. It will direct help and solutions to working oracle DBA in the industry with no more doubts and confusion.
    4. It will ease burden on oracle teaching society.
    5. Certification aspirants will be able to get to the point and expertise help.
    6. It will stop more talking over limitations and demerit in comparisons to other RDBMS.
    7. It will provide answers to how to provide ease, robust, long lasting solution and ultimate use of resources in view of cost saving.
    8. If oracle education will so easy then, it will help to provide good and increased certified DBA to IT industry.
    Now, you please consider…!
    Warm Regards

    With humble request, I would like to request all Ace Members and Top Users in the forum to provide
    following source of knowledge on Oracle:
    1. Free Bookhttp://docs.oracle.com
    2. Online / Chat Supporthttp://forums.oracle.com
    3. Articlehttp://otn.oracle.com
    4. White Paperhttp://otn./oracle.com
    5. Key Notehttp://otn.oracle.com
    6. Troubleshoothttp://forums.oracle.com
    7. Ace Experiencehttp://forums.oracle.com
    8. Expert’s conversation Roomhttp://mix.oracle.com
    9. How tohttp://wiki.oracle.com
    10. Blogshttp://blogspot.oracle.com
    11. Archivalhttp://otn.oracle.com
    http://forums.oracle.com
    12. Tip & Trickshttp://forums.oracle.com
    http://wiki.oracle.com
    http://otn.oracle.com
    http://mix.oracle.com
    >
    If you provide above mentioned dozen, source of
    knowledge; here are demerit which may be:
    1.     It may decrease the sale of priced books.Probably not. People don;t read.
    2.     It may decrease the revenue to metalink.Probably not. People need patches.
    3.     It may decrease the sale of priced study material, sold by Oracle University.Probably not. People don't read.
    4.     It may cause of highlighting the lacks and mistakes left in oracle documentation.Probably not. There is a forum dedicated to this.
    5.     It may be cause of lowering the sale of third party tools.Probably not. It's all about religion and comfort levels.
    >
    But;
    If you provide above mentioned dozen, source of
    knowledge; here are sure merits:
    1. Factors, who are working for decrease the
    popularity of oracle, will suddenly surrender.Probably not. Religious people will argue for their religion even in the face of fact. And loyalty to programming and other computer tools borders on religion.
    2. It will boost user base in term of quantity and quality.Probably not. People are not that willing to learn.
    3. It will direct help and solutions to working oracle DBA in the industry with no more doubts and confusion.Probably not. http://orafaq.com has been doing this for years now and people are just as stupid as ever.
    4. It will ease burden on oracle teaching society.Probably not. People are to lazy to learn.
    5. Certification aspirants will be able to get to the point and expertise help.Probably not. Certification aspirants mostly want to be certified - learning is irrelevant.
    6. It will stop more talking over limitations and demerit in comparisons to other RDBMS.Probably not. See my earlier comment about religion.
    7. It will provide answers to how to provide ease, robust, long lasting solution and ultimate use of
    resources in view of cost saving.Probably not. The answers are out there in easy to read format but people are too lazy to search.
    8. If oracle education will so easy then, it will help to provide good and increased certified DBA to
    IT industry.Only in an ideal world.
    >
    Now, you please consider…!I tried. I failed.

  • My Oracle Forums Handle Name Changed without my notice!!!

    Hello Oracle Forums Moderators,
    I joined Oracle Forums 04/04/08 with and email address (1). I decided to change my email address and handle names, so my forums handle name is cutedba and my email address is (2). I already had like 8 posts in oracle forums. Today when I logged to oracle forums I found my handle name is user8722709 and my posts resets to only one post (with this thread, it will become two posts).
    and my joining date became 08/19/09.
    I went to the control panel and edited the profile and handle name to cutedba. I received the following message:
    "The handle you are trying to update is already being used, please identify any other value and retry."
    and I logged as my new email address (2) as usual. Please fix this for me. Because I am the cutedba in Oracle Forums.
    I also want to mark one of the threads I created earlier as answered but I can't the forum thinks I am not the author of that thread:
    How to install multiple oracle homes in oralce 9i on unix
    Thank you and best regards,
    cutedba

    Ok, let's see if I understand this clearly (cos if I don't then I'm sure the site admin won't)...
    1. You created an account (let's call it "Account 1")...
    Acount 1:-
    Email Address: [email protected]
    Forum Notifications Email: [email protected]
    Handle: {default}
    2. You created a second account (let's call it "Account 2")...
    Account 2:-
    Email Address: [email protected]
    Forum Notifications Email: [email protected]
    Handle: {default}
    3. You modifed Account 1 to change the Forum Notifications Email and the handle:
    Account 1:-
    Email Address: [email protected]
    Forum Notifications Email: [email protected]
    Handle: cutedba
    That's right.
    all my forum participation were updated including post numbers.
    What was updated? All you did was change your notification email and your handle on Account 1?You are right.
    I also successfully login using email id (B) with the password, no issues.Yes, I dedicated an email account for oracle stuff and I used it to create an oracle account (Account B) because I couldn't delete/disable Account A from oracle.
    >
    4/ submitted a new thread in oracle forum as in the link I mentioned earlier.I don't see that has any relevance.correct!
    5/ when I visited back Oracle Forums Today, I saw that my post count reset to 1 (last reply) and the system identified me as a different user (user8722709) than cutedba. I went to the Control Panel and Modified the Name Handle for forums back to cutedba . I received the message mentioned earlier.Which account did you log on as?Account B
    It seams that Oracle forums end me up with two identities!!But you created two, so there will be two. ?:|Because oracle will not delete/disable account A
    Please I need you to help on fixing this issue.I'm just a user of OTN like yourself, I can't fix it, I'm just trying to help ascertain exactly what you've done.I understand, thank you for help and make this issue clearer even to me ;-)
    One more thing, I logged in to oracle forums using email (A) and my profile cutedba is there.Brilliant, that's what I'd expect.
    I went to the Control panel and found the Username is still with email (A) but the forums email is with email and (B).Exactly, that's also what I'd expect.
    But why still the the username did not changed and my profile is not updated yet?On which account?Account A
    Occasionally, if OTN have been doing upgrades or such things, I believe the forums will move across to the failover servers, so sometimes changes to profiles may not be picked up or transferred back to the main servers. However, you said you'd logged in with Account 1 and it said cutedba on it.
    I think it is the same bug in the forums.
    I feel this too.
    I wish if OTN has the ability to allow users to delete account that are no longer necessary, like my case here. Account A is no longer necessary for me but if switched the handle names between account A and B, I still can't get the credits and links for Account B profile.
    How to report OTN bugs?
    Regards,
    Cutedba

  • When sending an email to all our members under a group email I get a fatal error relay access denied. Very important I get these emails out to all our members.

    Trying to email a group of all our members and I keep getting an error message.
    he original message was received at Tue, 18 Nov 2014 13:50:51 -0500
    from d154-20-241-245.bchsia.telus.net [154.20.241.245]
    ----- The following addresses had permanent fatal errors -----
    <[email protected]>
    (reason: 554 5.7.1 <[email protected]>: Relay access denied)
    ----- Transcript of session follows -----
    ... while talking to scariboochamber.org.:
    >>> RCPT To:<[email protected]>
    <<< 554 5.7.1 <[email protected]>: Relay access denied
    554 5.0.0 Service unavailable

    However, I added "allowpercenthack = no" to main.cf
    and that seemed to allow postfix to not attempt to
    process it itself and let my application do the
    work.
    However, if I now send mail now to my server (from
    another server) destined to
    user%[email protected], I (and my
    log) gets:
    Hardly ever had a need for this, but if I remember correctly you will need to set:
    allowuntrustedrouting = yes
    in main.cf
    (No need for allowpercenthack (I think))
    or you could create a hash table before rejectunauthdestination to return OK based on your needed patterns.
    I think the first method will work though.
    Side question: I placed `rejectnon_fqdnsender'
    after rejectunauthdestination destination because I
    didn't want to bother checking the sender unless I
    confirmed the recipient was at my server. Does that
    comment that it doesn't work after
    checkrelaydomains, mean that it also doesn't get
    processed after
    checkrelaydomains is deprecated
    You can place rejectnon_fqdnsender anywhere you like or even omit it, but I don't see why you would have to.

  • To all  Oracle ACE Member and others

    Hi there Oracle ACE Member and forum members.
    I have need an answer to the real question of the moment.
    What is the best technology in the chapter of performance?
    - Toplink
    - Business Components
    What are the advantages of each technology and which are u using and why?
    Thanks

    You cant say one is more performant than the other - you can write fast/slow applications in each. The choice is down to, not performance, but other features like development experience, expectations, development styles.
    Shay does a nice summary in his blog so instead of repeating I'll just point you to here
    http://blogs.oracle.com/shay/2006/03/10
    Regards
    Grant Ronald
    Oracle Product Management

  • It's my 3000 post – Oracle ACE and Oracle employees

    Hello,
    So, this is my post number 3000. In this forum, it’s not so unique, but still I decided to dedicate it to the subject of Oracle ACE and Oracle employees.
    Recently, Joel blogged about Carl awarded Oracle ACE (http://joelkallman.blogspot.com/2009/02/carl-backstrom-oracle-ace.html), after special efforts made by Sharon, because “the folks at the Oracle Technology Network decided that Oracle employees could no longer be awarded the ACE designation”. I truly wish I could write that Carl is a living proof of this decision being misguided. Unfortunately, I can’t. However, Carl’s case paints the situation in strong colors. Only after his death, Carl was honored with something that I’m sure seems so obvious to most of us.
    I’m thinking that if this decision, not to award Oracle employees with Oracle ACE, was made sooner, people like Scott and Joel would not have awarded Oracle ACE, not to mention Tom Kyte, and probably others I’m not familiar with. Scott and Joel deals with APEX all day long, as part of their job, and this forum is not part of their day job description. Still, they find the time to help us all. Just look at the post counter of Scott. I’m amazed each time I see it. Scott, with all his experience, doesn’t limit himself to only the most complicated issues. You can see his replies, to the most basic issues, almost every day. Joel never failed helping me, and many others on this forum, every time there is an issue only he can help with. Scott and Joel were lucky, and have been awarded Oracle ACE, prior to this decision. Carl was less lucky, and as Joel wrote, I can’t think of anyone who better represent the true meaning and spirit of the Oracle ACE program.
    The point I’m trying to make is that Oracle ACE should not be left for luck and timing, or place of work, for that matter. I’m sure that the OTN folks had best intensions when making this decision. I can understand that people might suspect favoritism toward Oracle employees; however, the solution shouldn’t be the easy one – no to every Oracle employee.
    While writing, I can think of Tyler. He’s no longer a member of the APEX team, but we can still enjoy his wisdom and experience on this forum, not to mention his APEX dedicated blog entries, were he covers special and more complex aspects of working with this tool. I don’t know if Tyler qualifies to become Oracle ACE (and, of course, I’m only using him as an example) but it seems wrong to me not to even consider it, just because he happens to work for Oracle. I’m sure there are others like Tyler, in the other forums. I believe that this kind of behavior, by Oracle employees, should be encouraged, and not taken for granted. Certainly, they shouldn’t be penalized.
    So, what all of this has to do with my 3000 posts? I believe I earned the right to call myself a frequent poster on this forum. As such, I know how time consuming this forum can be, not to mention the hard and tedious job of keep repeating the same answers to the same questions, keep pointing to old references, and such. So, I want to take this opportunity to thank all the active participants of this forum, Oracle employees and others. In spite of all the hardship, this forum can also be very rewarding, and at least for me, a very educated experience. I learned a lot in my attempts to help others. I can all heartedly recommend it to everyone who enjoys helping others, and enriching him /her self in the process.
    Regards,
    Arie.

    If I understand you correctly, you ought to reinstall. At this point, even if you're able to resurrect this installation, it might be severely unstable. Mostly because of my proclivity for messing around with settings until I screw something up, I have a tremendous amount of experience with the recovery console, and my success rate is not inspiring. If you have data you need on the drive, your best course of action is to reinstall to a different boot drive, and once you’re able to boot, archive the files you want from the corrupted installation. Then you can wax both drives, restore the data and get everything back the way you want it. Getting your data back from the recovery console is basically a lost cause since it doesn't support wildcards (as in, you'd have to copy every freaking file one at a time).
    I re-read the above paragraph, and it's not the clearest thing I've ever written, so if you need clarification on anything, let me know.

  • Getting All Local Groups, Group Members and Local accounts on all Servers

    Hello Everyone,
    Sorry if this has been covered already, but I didnt see anything that quite answered my question.
    I've been given the task of generating an Access Control List here at work and I've managed to piece together a few scripts that gets me so close it's frustrating.
    The script I have now will parse through a text file with all my Windows servers listed in it and it does output in the console the server name, all of the groups on the server (Administrators, Remote Users, Backup Operators, etc.) and all the individual
    members of those groups and nested groups.
    However, I can't seem to get it to export to a CSV for easy digestion.  I've tried to pipe the export-csv command, but the csv it gives me doesnt have any useful information in it.
    Here is the script:
    $list =@()
    $Servers=Get-Content ListOfComputers.txt
    foreach($server in $Servers) {
    $server | % {
    $server = $_
    $server
    $computer = [ADSI]"WinNT://$server,computer"
    $computer.psbase.children | where { $_.psbase.schemaClassName -eq 'group' } | foreach {
    "`tGroup: " + $Group.Name
    $group =[ADSI]$_.psbase.Path
    $group.psbase.Invoke("Members") | foreach {
    $us = $_.GetType().InvokeMember("Adspath", 'GetProperty', $null, $_, $null)
    $us = $us -replace "WinNT://",""
    $class = $_.GetType().InvokeMember("Class", 'GetProperty', $null, $_, $null)
    $list += new-object psobject -property @{Group = $group.Name;Member=$us;MemberClass=$class;Server=$server}
    "`t`tMember: $us ($Class)"
    The format it pumps out to the console is good, other than it's somewhat upside down, the members are all listed above the group name such as below, where there's no members in the Administrators group, but User1, 2 and 3 are part of the Remote Desktop Group.
     This isn't horrible as I can cut and paste it out of the console and into a spreadsheet, but then i have to shift things up a row and doing that for the entire list is going to be way more work than I'd like.
    Server01
    Administrators
    User1
    User2
    User3
    Remote Desktop Users
    When I use export-csv on the script above I get a bunch of numbers rather than groups or members like this:
    Length
    13
    51
    40
    35
    63
    63
    35
    32
    Hopefully, there's someone out there who can help me tweak this script so that I can just dump it all to a csv and be done, with little to no massaging of the data afterward.
    Thanks in advance,
    Tyler

    Sure. After you've run the script, type this in the console:
    $list | Export-Csv .\groupInformation.csv -NoTypeInformation
    You'll then have a CSV file in the directory, open that with Excel and see if that gives you the information you're after.
    Don't retire TechNet! -
    (Don't give up yet - 13,085+ strong and growing)

  • Note to Forum moderators/PR/anyone at Creative who will listen and A

    Dear Forum Moderators/PR punchbags,?It seems Creative doesn't mind continually taking punches from the general public, and the longer Creative waits, the more annoyed people are getting. We always hear the Creative moderators saying they are sending feedback up the corporate ladder, however we are yet to hear any form of decent news/updates on the X-Fi drivers which clearly have a multitude of issues. While I don't doubt the Creative moderators are doing their job, I (and i'm sure I speak on behalf of many others) expect to hear a decent reply from someone who has the authority to do so. We all paid good money for the product, and do not deserve to be ignored!?What do Creative have to say about the blatant ignorance of the existing "issue-ridden" X-Fi drivers for Vista? And what is Creative doing right now to rectify the issue? Why have so many good paying customers been left out in the dark for this long? And why do Creative continue to market the X-Fi as "Vista ready" when there is blatant evidence it is no where near "ready" for Vista?

    Watching NASDAQ on tues told something of what was discussed here. Creatives main problem is trying to be all things to all people and insisting on in-house manufacture of their computer peripherals. While they may be able to control quality somewhat, their competition has the edge in cheaper labour. Note, the drastic cuts in R&D in the last 8 months. This is all relati'vely normal for companies this size. One other thing that is making hard for them to be competati've is being an american based company. However, doubtful this is going to bankrupt them, or negati'vely effect them in a way that they cannot shake off easily. Guaranteed, if and when drivers & software are released, so present gen cards work with vista, the very small (albeit vocal) community here on the forum will tone down the rhetoric. Creatives money is not made in retail, it's made in wholesale contracts to the likes of Dell for example, and 90% of all onboard sound chips have been Creative Labs and will likely continue to be. (note X-fi chips sold to makers?such as?azureus) This entire fiasco has been a lesson in consumer strategies as companies push and pull the marketplace to suit their manufacturing needs, not fill a void?of supply and demand as we would like it to be. The reality is Creative is under very little obligation to support these cards under vista, is it a good business decision? I dont think so. It sure would be nice if they has some respect for the retail customer. Some good old fashioned?PR would be nice here too. Will this sink them? Probably not. Would we like them to go bankrupt and send apology emails to all of us? Absolutely, nothing less. Is that reality? No. I simlpy won't put this much emphesis on my computer systems sound functions until I see what is being manufactured. And there are some really really good looking contenders right now. And several more to be released over the summer. In retrospect, this is a good thing Creative are doing by throwing the market wide open. This has been longed for, almost 8 years now. Don?t get me wrong, I still think this was and is a truly crappy thing they are doing, but in the long run, we win, becasue finally, we will have cards that rock, and people that care about the end user.Message Edited by scorpion_saga on 05-03-200703:30 AM

  • HT204053 Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

    Is it possible to have two (or more) different icloud mail accounts (not alias) under the same apple id? If not what is you best advice for all family members to have their own e-mail and still share the purchases under the same apple id. Thanks

    mannyace wrote:
    Thanks for the response.
    So I basically won't run into any trouble? I
    There should be no issues. Its designed to work like that.  You don't change Apple IDs just because you get a new device.
    mannyace wrote:
    Thanks for the response.
    Is there any chance that the phones can fall out of sync?
    Unlikely. But nothing is impossible.   Though I don;t see how that would happen. As long as both are signed into the Same Apple ID / iCloud Account they will be N'Sync. (Bad Joke)
    mannyace wrote:
    Thanks for the response.
    If I get a message or buy an app or take a photo on the iPhone 5, how do I get those things onto the iPhone 6?
    If you buy an App, you have 2 ways to get it to the iPhone6: If Automatic Downloads is enabled in Settings->iTunes & App Store, it will automatically download to the iPhone 6 when you buy it on the 5 and vice versa if you buy it on the 6, it will download to the 5.
    Alternatively, you can simply go to the App Store App->Updates->Purchased and look for the App there and download it. Purchased Apps will not require payment again. i.e They'll be free to download to the iPhone 6 once purchased.
    SMS Messages will sync over using Continuity as long as they are on the same Wifi network. Otherwise, restoring the iPhone 5 backup to the iPhone 6 will transfer all messages received up until the backup was made onto the iPhone 6.
    Images, can be transferred either through Photo Stream
    My Photo Stream FAQ - Apple Support
    Or any Cloud service you want such as Dropbox, or One Drive.
    mannyace wrote:
    Also, something i forgot to ask initially: Should I update the iPhone 5 to iOS 8 first or does that not matter?
    If you want the Continuity features as explained above you need to update the iPhone 5 to iOS 8. Otherwise its not all that important.

  • How can I set up an SMS group so that all group members can dial a group number and have a text sent out to all members of the group

    How can I set up an SMS group so that all group members can dial a group number and have a text sent out to all members of the group
    This would be an SMS group similar to an email listserv but running on the SMS network
    I have seen private individuals offering this service
    It seems strange to me that no internet site like Apple, Yahoo or Google offers this as a free service much as the email group services are free services.
    Steve

    I think the app GroupMe might do what you want. You might also try contacting your carrier. My carrier offered some fancy group texting service for a while but they never really advertised it so, unless you asked, you never would have known. But, GroupMe is available in the app store. There are lots of other apps that also do group texting but it seems to be the one that gets recommended the most.

  • About 1 year ago, I can not access the App Store. The message that appears is: "One Moment Please. Connecting to the iTunes Store. Loading ... I've tried all the aids presented in this and other forums and nothing solves. iTunes connects normaly...

    About 1 year ago, I can not access the App Store. The message that appears is: "One Moment Please. Connecting to the iTunes Store. Loading ... " I've tried all the aids presented in this and other forums and nothing solves. iTunes connects normaly...

    Your profile indicates your Mac is running v10.7.2
    If that is correct, updating your system software may help.
    Click Software Update from the Apple menu.
    Restart your Mac after updates are installed then try the App Store.
    If you can't update that way, there's a workaround.
    Install the OS X Lion Update 10.7.5 (Client Combo)
    Then restart your Mac and try the App Store.
    messaged edited by:  cs

  • Add oraForms  librairy to Oracle jdev 10.1.3.3 and build forum

    Hi,
    I have to build a forum using oracle jdev 10.1.3.3 and oracle database using soa architecture, that's why i wouldlike to add oraForms librairy to my oracle jdev, i would like lso to get some tutorials andsample in order to build my forum.
    Thanks.
    Edited by: user4585473 on 14 sept. 2008 14:14

    Hi,
    libraries can be added on the project level. Open the project properties (context menu) and choose the library node. I am afraid, but I don' think there is a tutorial that explains end-to-end what is your development assignment
    Frank

  • ACE 20 | When connection to one serverfarm/VIP cross 1000 all other serverfarms and VIP of that context are facing very very slowness

    Dear Community
    Hi !!
    We are  Facng a typical issue and scraching Head since sometime Now and Now seek help and sugesstions
    I have a ACE with 10 Context. Now There is a Particular Context  which have 6 server farms and all have under different VIP.
    Have raised Multiple TAC cases and Captured Millions of Packets but no reason. The ACE resource and CPU Usage is Normal and no increase noticed.
    Issues Happening is that when connection to one serverfarm cross 1000, all other serverfarms and VIP  of that context  are facing very very slowness ,and  they have no relation with each other both Physically and Fictionally
    If any of you have heard of similar issue can you refer me a solution if the issue is with ACE 

    Hi Shirshendu,
    Replied to you on other thread.
    Regards,
    Kanwal

  • SQL query to list all collections, members, OS, SP, IP and if physical/virtual

    Hi guys, I have the below query which lists all the collections and their members, however I need to expand it to also include the OS, Service Pack, IP and if it's a physical or virtual machine.
    I've tried a few things but only made it worse. Is anyone able to expand the below code to include those extras??
    SELECT
    v_FullCollectionMembership.CollectionID AS 'CollID',
    v_Collection.Name AS 'CollName',
    v_FullCollectionMembership.Name AS 'SystemName'
    FROM
    v_FullCollectionMembership, v_Collection
    WHERE v_FullCollectionMembership.CollectionID = v_Collection.CollectionID
    ORDER BY
    CollID ASC, SystemName ASC

    Hi,
    These requirements could be found in several threads or blogs. We need convert WQL to SQL, and you can involve SQL guys to integrate the statements and format the result.
    How to create a all virtual machines collection.
    SCCM SQL Query - IP Address
    ConfigMgr Systems without Current Service Packs, and System Patch Status 

  • Using ios 7.0.4 can a group email be sent either from icloud or iPhone by a means other than selecting the individual Contact, ie; can the group be selected and then an email composed that will send the message to all group members.

    Using ios 7.0.4 can a group email be sent either from icloud or iPhone by a means other than selecting the individual Contact, ie; can the group be selected and then an email composed that will send the message to all group members.

    Hi Richard, 
    Thanks for the reply - I think I've sorted it though and there isn't actually an issue.
    The whole group wasn't receiving the NDR, only the group manager which I setup a few weeks prior. This is a new feature so it complies with certain RFC's, basically the group manager will recieive the NDR to let them know there is a problem.
    Something to do with mass mailing and unsolicited mail.
    Ta
    Ian

Maybe you are looking for