All Adapters existing in..
Hi All,
Where all the adapters exists?(if Adapter Engine is answer then IDOC and HTTP are not developed in Java then where they exits?)
regards,
Sridhar
Hi Sridhar,
Xi has make the adapter in two places..
1) Integration Engine.
2) Adapter Engine
In the Integation Engine only two adapters will be reside..1)Idoc adapter
2) Http Adapter.
In the Adapter Engine: other than the idoc and http the reamining adapter are avilable in Adapter Engine.
The adapter engine is Developed by using the JCA connectivity Architecture.
Hope I am clear.
Please let me know if you have any queries...!
Thanks and Regards,
Chandu.
Similar Messages
-
Whenever I open a new window in Firefox, it not only opens a new window with a new tab, it also opens all my existing tabs a second time in the new window. This has been happening for several days. Closing Firefox and rebooting doesn't solve the problem.
A related problem is that if I close all tabs and close Firefox, then reboot and re-open Firefox, all the tabs that were closed re-open too.
This is new behavior in Firefox in my experience.Firefox opens the home pages in a new window, so if you want to open a new window blank then you need to set the home page to about:blank
You can check the startup setting:<br />
Tools > Options > General > Startup: "When Firefox Starts": "Show my home page" | "Show a blank page" -
How can I add new music to my iPhone from a new device without losing all the existing music?
Hello! My personal laptob that I usually use to sync my iPhone to is broke at the moment so, I've been syncing to my work computer. I have some music, not downloaded from iTunes, on the new computer that I'd like to add to my iPhone but I can't see how without iTunes deleting all my existing playlists and music from my iPhone. I can click the menu arrow on a song and then select "Add to" from the pop-up menu, then choose from "Devices" - Nathan Swain's iPhone - and it lets me, but nothing ever get's added to my iPhone. I have also authorized this computer on my iTunes account. I'm stumped!
By design, iPhone syncs or manually manages iTunes content with ONE computer at a time. Each time you switch computers, ALL iTunes content is first erased from your phone, to be replaced with the content from the new computer.
No way around this fact, other than transferring your content to the computer you normally sync with. -
I have not seen this precise issue addressed anywhere. I don’t know if it’s an iTunes or an iPod problem:
- Some, but not all, podcasts existing on the iPod no longer appear in iTunes;
this, after normal behavior for more than a year since purchase of the iPod.
- Different podcasts have been affected at different times, after changes in the state of the iPod.
- Only podcasts are affected.
- This concerns an iPod nano 6th gen. and iTunes 11.0.2 (26) on System 10.6.8
- The only change to iTunes, the Mac, or the iPod is that just before this condition began
I’d begun syncing an iPhone via iTunes.
I sync manually (“manually manage music and videos”). The first time this happened, I wanted to delete seventeen podcast episodes (all belonging to one podcast) existing on the iPod — but they didn’t show up in iTunes. I tried re-downloading them and re-syncing, to see if the new versions would somehow “re-link” to iTunes. They didn’t. Only one — new — episode appeared in iTunes.
I ultimately reset the iPod and manually resynced all the podcasts I currently had on iTunes. That worked, though I had to painstakingly add in all the other content deleted by the reset.
So: after that reset and manual sync, all podcasts and episodes on the iPod were visible to iTunes and I was able to delete the podcast and its — now 18 — episodes I’d wanted to get rid of to begin with. But the next time I connected the iPod, only 8 podcast episodes out of 21 episodes total existing on the iPod were visible to iTunes. These are different podcasts; I’d deleted the original “invisible” ones.
By “visible,” I mean in the “Podcasts” list view under “[name]’s iPod” in the iTunes sidebar. If I select “[name]’s” iPod in the iTunes sidebar and the “Podcasts” tab, all podcasts and episodes are visible, though greyed out because I’m set to sync manually. It’s unclear to me if these are the podcasts on the iPod or those currently in iTunes, as they are currently the same. If I switch to syncing automatically, all content on the iPod will be lost again, so I’m not up to trying it at the moment.
As I said, this involves only podcasts. All other content on the iPod does appear in iTunes.I have the same problem- i see my movies in the ipod section in itunes and they even show as mpeg4 in the 'kind' section but they dont have that small TV icon next to them. if i play these in itunes, they play fine- but try playing them on the ipod and all you hear is the sound and no picture. All videos that i manually transfer work fine in the beginning- its when i hook up the ipod to the comp again and start itunes- they start showing up without the 'tv' icon!! i have to again transfer them from the itunes library to activate them as videos.
Need Help!!! -
When touring the latest version of Firefox I created a master password and unfortunately never wrote it down. Now I must get my Church's taxes and W-2's done and I'm unable to login to my state and IRS/SSA accounts as I don't have my latest logins and passwords because they were all stored in my older version of Firefox. Everything I've read, so far, states that resetting the master password will result in the loss of all my login and password data. I cannot have this happen! There has to be some way I can either recover my login and password file data or the password I created for my master password? I need help with this ASAP as time is running out.
Thank you for your response. Unfortunately it is not the solution I am hoping for. Both of the links you posted clearly state that resetting or removing my master password will result in the loss of all my existing login and password data. I wouldn't have a problem with that if I could save or print out my current, but hidden by the password manager until I enter my master password, login and password data which I could eventually reproduce within password manager. Unfortunately this is the only place where I have all that data recorded and we are talking about many many lines of login data!
Bob -
JDBC Scenario: Delete all the existing records and Insert
Dear All,
Scenario: IDoc to JDBC
PI need to delete all the existing records in the SQL table then need to insert the records.I have created a two statements in the target structure.
Statement1
-> TableName
-> action : DELETE
-> Table : TableName
Statement2
-> TableName
-> action : INSERT
-> Table : TableName
->Access
-> Elements
I am getting below error while try to delete the records in the table.
JDBC message processing failed; reason Error processing request in sax parser: Error when executing statement for table/stored proc. 'Tablename' (structure 'Statement1'): java.sql.SQLException: FATAL ERROR document format: structure 'Statement1', no key element found
Note: we use above structure in the another interface without specifying any Key for Delete operation(Server is same but different database for this two interface) and it works fine. Although the Primary keys has been set in the SQL table i am getting the above error.
let me know what are the setting need to make in PI and SQL DB to achieve this.
Regards,
Manikandan Shanmugam
Edited by: Manikandan Shanmugam on Nov 8, 2011 6:19 AMThe straucture what you have deined for Delete is not correct, you should have key field in statement structure then only you can perform Delete operation.
refer below link
http://help.sap.com/saphelp_nwpi71/helpdata/EN/44/7b6e85fde93673e10000000a114a6b/content.htm
Regards,
Raj -
We recently migrated from Office 2010 to Office 2013. An annoying change is Outlook's "Use Cached Exchange Mode" setting that changes the previous setting of all email to partial email based on how old emails are. This is confusing
for end users because if they have a 1GB mailbox size limit and they look at the properties of their mailbox, it shows the cached amount which is always then less than the full amount. While they have a 1GB limit, the properties of their mailbox
might say 700MB because that's all that is cached, but meanwhile they can't send because they are actually over 1GB on the server side.
I want to set this cache setting to "All" for EXISTING profiles and new profiles. I think I can do it with GPO for new profiles, but I don't see a way to set it for existing profiles. I assume I have to do this with a registry setting.Hi,
The cached mode Sync Slider setting is maintained in the Outlook profile settings in the Windows registry. If you want to administer this setting via group policy, you can use the group policy templates, which are available from the Microsoft Web site. The
group policy template files are Outlk15.admx and Outlk15.adml. If you use group policy to manage this setting, the following registry data is utilized by Outlook.
Key: HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\15.0\Outlook\Cached Mode
DWORD: SyncWindowSetting
Value: integer value (Decimal) specifying the number of months (use only the following values)
0 = All (entire mailbox)
1 = One month of mailbox items
3 = three months of email items
6 = six months of email items
12 = twelve months of email items
24 = twenty-four months of email items
Refer from
http://support.microsoft.com/kb/2733062
Hope this will be helpful for you. -
i was downloading music from my partners purchased music on my phone and it wiped all my existing music, how can i get my music back as i dont have it on my computer anymore? please help me
If you bought this music from iTunes you can download it again from within your Purchases in the iTunes App.
Otherwise, razmee is right. you can only sync to one itunes library. If you sync to another one whatever does not exist on the new library will get removed from the phone.
That's is by design to avoid Piracy. As otherwise you could simply transfer purchases to other users. -
Tried toadd new subaccount, instead I lost all my existing subaccounts and saved emails. Help!
I tried to add an additional sub-account under local folders; instead all my existing local folders disappeared with all my saved emails including valuable information.
I cannot find any information on where to find these missing sub folders.
As far as I can understand it, doing a system restore will NOT restore them. They are not in the delete box.
Any thoughts on where they have disappeared to?
Thanks for your help.Yes, I meant subfolders.
I have since realized that the missing files ARE still on my computer but now I can't find the trail to get to them. -
To Delete all the existing positions
Hi All,
Please guide me if I want to delete ( not delimit) all the existing positions from the System so that I can start fresh.
Best Regards,
AmitHi Amit,
You can delete using PP02.
First delete the relationships Infotype 1001 and then object Infotype corresponding to that position.
Reward if helpful
Regards
Tomesh -
When I upload photos from iphoto or any other folder it overwrites all the existing photos in my ipad. is there a way to add to the existing library without deleting what's already in the library?
No, apart from using the emailing them, to yourself or using a third-party app such as Simple Transfer (in which case the photos will only go into the Saved Photos/Camera Roll album) or the camera connection kit (Imported album). You need to sync all the photos that you want on the iPad in one go, as only the contents of the most recent sync remains on the iPad - not including photos in a sync is how you delete them from the iPad
-
Why does itunes delete all my existing photo gallery folders when I try to import (sync) new folders from my pc ?
you nees to make sure you are selecting everythin that you want on the iPad even things that are already on the iPad, if not it will remove anything not checked in iTunes.
Click HERE for more information on Syncing -
Ssis - Copy all tables exists in a DB to Destination flatfiles
could anyone help me out with this task-
Copy all tables exists in a DB to Destination flatfiles.
Condition 1) Name of flat file should be name of the Table
ex- Employee.Txt
2) Flat files should be created in run time and should not create prior.Hi nikhila.k,
According to your description, you want to export data from multiple SQL tables to multiple text files, and the file name should be the name of the corresponding table name.
To achieve this requirement, we can refer to the reply post by user756519 in the following similar thread:
http://stackoverflow.com/questions/6216486/exporting-data-from-multiple-sql-tables-to-different-flat-files-using-ssis-script
Please modify the first step with below:
Create a table named TablesList with the code below in SQL Server Management Studio (Ps: we can also change the FilePath to other place you want to put those text files):
USE database_name
GO
SELECT IDENTITY(INT,1,1) as Id, name as TableName,'C:\Temp\' + name + '.txt' as FilePath
INTO TablesList FROM sys.Tables
WHERE name <> 'TablesList'
GO
Then we can refer to the other steps in the reply.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
We need to shutdown all adapters for 2 hours. But the PI7.0 must be up.
Could you help tell how to achieve this?
Thanks a lot!Kelly,
This is how you can do:
Q 3: How can the RfcAdapter be started and stopped?
A: The RfcAdapter is implemented as a J2EE Service and thus this service has to be started and stopped. This will affect the whole RfcAdapter and can be done from the J2EE Engines Visual Administrator. When you are connected to the J2EE Engine choose the tab 'Cluster' and open the appropriate server node in the tree. Then open the 'Services' node. There you can see the entry 'SAP XI Adapter: RFC'. When you open the context menu on this entry you can start and stop the service.
This is for RFC adapter. Similarly you see all there only. This is from OSS note: 730870
Regards,
---Satish -
Under what conditions ALL Objects exists and does not exists
When does the ALL Objects exists in Database
For Eg: ALL_TAB_COLUMNS , ALL_USERS etc
When it does not exists
For Eg : ALL_SEGMENTS which does not exist and only options are USER_SEGMENTS and DBA_SEGMENTS.
There should be some rules for its existence and its non existence and under what conditions it exists and does not exists .
Please explain.Its clearly stated in Oracle documentation.
An ALL_ view displays all the information accessible to the current user, including information from the current user's schema as well as information from objects in other schemas, if the current user has access to those objects by way of grants of privileges or roles.
A DBA_ view displays all relevant information in the entire database. DBA_ views are intended only for administrators. They can be accessed only by users with the SELECT ANY TABLE privilege. This privilege is assigned to the DBA role when the system is initially installed.
A USER_ view displays all the information from the schema of the current user. No special privileges are required to query these views.
Edit: formatted the post :)
Maybe you are looking for
-
Organizing Photos by Original Date
I've recently replaced by hard drive and upgraded to iPhoto 6. The problem is that my photos are all arranged in random order. The dates associated with the original files seem to have changed in some cases so that the photos are all mixed up instead
-
Request for searching an error
hi can you please tell me how can i search request in rsa1old. sol: I think first of all when u r in moniter screen click request copy it and then go to rsa1old search and find it. But the result comes that no entry found. thanks regards gurkiran
-
TCP/IP adapter in Biztalk Server 2010
I want to develop a TCP IP Custom adapter for BizTalk sever 2010...please any one help me to create the adapter or please share me the links for TCP IP adapter
-
frozen rogue image on macbook air: synced iphone, was asked to download from itunes, to restart, did this. when restarted there was photo of chocolate saying 'love you'. never seen image, it will not delete, the techs at work tried too. No luck.Virus
-
In a blockdump a rowid is represented like 01 00 03 00 00 00. I think I have found that this is parsed as file 010 block 00300 and row 0000. That makes sense for block and row. For file I think I've pieced together some info which would indicate that