All adobe products that I have will not connect help when I seek online help?
all adobe products that I have will not connect help when I seek online help?
Waht version of the software are you trying to use? And the error seems pretty self-explanatory...
Similar Messages
-
TS4268 I did it all ... but my iPad will not connect to FaceTime ... What's next ???
I did it all ... but my iPad will not connect to FaceTime ... What's next ???
I'm sorry I wasn't clear... I have new iPad but when I'm trying to activate the FaceTime with my Apple ID it will not let me do it ( I'm getting the message "an error occurred during activation. Try again" )
I went through all the troubleshooting but it still doesn't work. I will mention my FaceTime on my phone works fine and the same was with my old iPad
Thanks for your help :) -
Anyone experience that the phone will not begin charging when plugged in, but must be rebooted while plugged in for phone to begin recharging?
Seems like battery is faulty. Make Genius reservation or set up service and take or send to Apple for resolution under Warranty.
-
My iPad still will not connect, help?
So, my iTunes is updated and I rebooted my iPad and the error still shows up. It says this 0xE800000A. Any ideas?
These folk might have:
0xE800000A -
I have just updated my IPADs OS to 6.1.2 this caused it to crash and i had to do a restore on the IPAD. Now some of the apps that i have will not reinstall directly from my computer. living in a country with a slow internet, uploading from the cloud is painfully slow. Is there some way to get around this
also must mention i have never had trouble that i couldn't fix on itunes but all of this has started since i have been using icloud for basic backups hope this helps solve problem
-
7510-e-all in one - c311a will not connect to my router dlink wbr-2310.
I just bought HP Photosmart 7510 e-All-in-One-C311A and it will not connect to my router which is a DLink WBR-2310. The diagnostic results are as follows:
Wireless On: PASS
Wireless Working: PASS
Connected: Not Run
Disconnect count total: 0
Disconnect count (last hour): 0
Disconnect count (last 24 hours): 0
Network Name (SSID) Found: PASS
Other Networks detected matching your network name (SSID) No
Wireless Networks Detected: 10
Printer Settings Consistent with Wireless Router Settings: PASS
No Filtering: FAIL
Channel: Not Run
Security: PASS
I have checked to make sure MAC addres is not enabled. I have tried turning off computer, router and printer. Please help. I have Windows 7.
Thanks very much!Hi,
This is how I installed my printer last week (also a 7510).: Using USB cable to connect it to a computer on your network and setup from there. It will ask you to use similar setup for your computer, just accept this The setup was no longer than 5 mins.
Please also check this:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02900814&lc=en&cc=us&dlc=en&product=5070121
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Yes, my cousins iPod is disabled. It says "ipod is disabled, connect to iTunes", I did that and it will not connect to iTunes, because it needs the pass code. The pass code key board will not show up and I cant connect. Please help me figure this problem out, my cousin is depending on me. Thanks, a concern customer.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Ethernet will not connect after installing latest Security Update.
I installed the latest security update, restarted my computer, and found that it now will not connect to the internet. I get the message "Could not find a PPPoE server". I have checked all of my settings, restarted the computer again, turned the modem off and on again, etc., but nothing helps. I know that there is nothing wrong with the modem and server because I am connected through the same DSL modem to this computer (a mac mini). It would seem that the security update has done something unhelpful! Any ideas?
BTW, the ibook does not have a wireless card and I had not installed 2 earlier wireless updates. I only installed this one because it said "recommended for all users".
iBook G4 Mac OS X (10.4.7)Hello
It seems that the update set your preferences to "use PPPOe" while you where using "TCP/IP".
Go to "System Preferences" and enter the pane whose icon is named "Réseau" in french (maybe "Network" in english.
Reset your settings to "TCP/IP".
Yvan KOENIG (from FRANCE vendredi 22 septembre 2006 08:13:56) -
Old Airport card (b protocol) will not connect to Airport Express
Hi,
I have an one year old Intel IMac running OS/X 10.5.7 and recently bought the Airport express. Setup went smooth and fast and within 10 minutes it was working. I did all the software and firmware updates.
Then I connected my wife's Windows laptop, network was detected and the password was accepted immediately so I got that connected as well.
Last, but apparently not least, I tried to connect my G3 iBook running OSX 10.2.8 with an Airport card (not the extreme but the predecessor) so I could use that one in the garden but it will not connect.
When I open the airport icon on the top of the screen then I see the network. If I select it and try to connect I have to enter a password. After a few seconds I get a message that "There was an error joining the selected Airport network".
When I use the Airport Setup assistant to establish the connection if tells me that "the password you entered was incorrect".
I was told that the Airport Express station is able to use a 801.11b protocol since that is what the old card uses.
I checked the password, I used textedit to type it first and the 'cut and paste' but nothing seems to work.
Long story but I hope I gave enough information for someone to resolve this problem for me. I cannot reply immediately to all replies but I will read them all.
Thank you,
HenkHello CarreraHenk. Welcome to the Apple Discussions!
When I open the airport icon on the top of the screen then I see the network. If I select it and try to connect I have to enter a password. After a few seconds I get a message that "There was an error joining the selected Airport network".
Which wireless encryption standard are you using on your new 802.11n AirPort Express Base Station's (AXn) wireless network ... WEP, WPA or WPA2?
For WPA, the minimum requirements are the AirPort Card & OS X 10.3.n. The AirPort Card will not support WPA2. -
Using CS4, used to work, now will not connect with any ftp settings. Using "test" says connected right away, try all combinations of ftp setting and will not connect. Same pw and user will work thru Filezilla and older version DW. This the screen that comes up.BTW, works on ALL other DW projects, all hosted by same company but not this one...it is on a different server...
I went to an older computer with Dreamweaver MX, set up identically, and connects to ftp right away, no problems. Other websites i have with DWCs4, no connection problem, it is jsut this one site, the one I need to work on. And it connects thru Filezilla...frustrated no end. Also, on other computer, same website will not connect thru DWCS4...sure could use a solution.
-
My Iphone 4's bluetooth will not connect.
The problem that I am having is that my bluetooth on my iPhone 4 will not connect. When you visit the bluetooth settings, the area where you would turn it off and on has a loading circle. The button never returns and doesn't allow me to turn my bluetooth on or off. I used the control panel that you can access by swiping up on the screeen; however, whenever you turn that off or on there is no change to the bluetooth. I have completely restored the iPhone a couple times using different settings hoping that it would change the outcome but no luck. I am trying to connect my iPhone 4 to a JLabs bluetooth headset and it has worked well in the past but all of the sudden it seems like my phone no longer has bluetooth. I appreciate any information you all can give me regarding the issue. Thanks and have a great day.
Best Regards,
SeanWhen you restore the device as new, you are essentially reinstalling a fresh new copy of iOS 7 onto your device. This will clear out any potential software issues with the device, so it is important to not restore from a backup in order to isolate your personal files from conflict.
If the bluetooth is still not functioning after a complete factory restore with iTunes on a computer, than your device will be experiencing a hardware issue and will need to be serviced.
If you are within the 1-year warranty or have purchased AppleCare, you will be eligibile for a replacement iPhone 4 for free. If you are not within any form of warranty, then you will be subject to an Out of Warranty repair fee of $149. -
Officejet Pro 8100 will not connect wirelessly to my main PC
Was able to connect the printer to the wireless network and will print for a wireless laptop but am not able to select this printer by my main PC. When asking it to add a new printer it finds the 8100 but freezes at that point and will not connect. I have reloaded the driver software but the software also freezes when trying to locate the printer.
Hello wsw1,
Welcome to the HP Forums! I understand the software keeps freezing when "Locating the Printer".
What is your operating system on this computer? Windows or Mac?
Try installing this software over a USB connection. Please follow this HP document on Installing Printers Software over a USB Connection. Choose your correct operating system.
This will be a test, to verify if the software is able to successfully install without freezing. (Make sure you leave the USB cord out of the computer until it prompts you to connect.)
If you get this software installed on your computer, then try Convert from a USB connected printer to wireless.
Looking forward to hearing from you.
I worked on behalf of HP. -
Hi my iPad is picking up my internet provider but will not connect
hi
my ipad is picking up and showing my internet provider but will not connect or when it does it drops out. but the signal is still showing.Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Satellite L455-S5975 Laptop will not connect to public wifi
I have a Satellite L455-S5975 laptop. I am trying to connect to a public (but security code protected) wireless network, WPA2. I have successfully connected a few times, but when I "sleep" my computer or restart it, I can no longer connect. The wireless network is recognized and I am prompted for the password, but it will not connect. When I run the troubleshooting, it asks me to restart the wireless router. Restarting the router does work and allows me to connect, but it is a router used by many other people and I don't have the option of resetting it every time I want to get on the internet. I have looked into updating the wireless driver software, but cannot determine what I need. I believe I am running Windows 10 on my computer. Any advice would be appreciated!
Can you get the settings you have on your Realtek® 802.11b/g wireless LAN.
You can get to these properties by following instructions:
CONTROL PANEL / NETWORKING AND SHARING CENTER
CLICK TO OPEN
ON LEFT CLICK CHANGE ADAPTER SETTINGS
SELECT ADAPTER
RIGHT CLICK
SELECT PROPERTIES
FROM HERE :
CLICK CONFIGURE
SELECT ADVANCED;
HERE WE NEED YOU TO POST BACK ALL OF THE PROPERTIES AND THEIR VALUES (VERY IMPORTANT) YOU HAVE SET HERE.
ONCE DONE IMPORTANT CANCEL ALL THE WAY OUT DO NOT CLICK OK
If you could get the Router Model number it would be helpful also.
Once you have posted your results, we should be able to help answer your question.
-Kenna
"Knowledge should be unrestricted and the most important commodity we can offer to help one another." -
Ipad will not connect to internet yet still recieves email and youtube?
My ipad will not connect to google or another online service but I still recieve email and you tube ??
Is a firewall enabled somewhere?
Maybe you are looking for
-
ICloud backup has old non-email Apple ID, no longer have password
I'm unable to restore my iPhone 4/iOS 6.1.3 backup to my new iPhone 5/iOS 7.0 Using my new iPhone 5s: 1. In the Set up your iPhone screen, tap Restore from iCloud Backup. 2. In in iCloud Sign In screen, I enter my email-based Apple ID and Password, t
-
iPhone 4s phone, Windows 7 professional. Dell laptop, tried removing and reinstalling all Apple products including itunes, changed the language setting to English as previously outlined by another user, When I click on the icon or run via all program
-
How to read from a ResultSet right after insertRow() ?
Suppose I have table TABLE with a numeric ID primary key that is filled in automatically by the db (i.e., using a combination of a sequence and on-insert trigger). My problem is that after the insert I have to make another query just to get the value
-
Very Slow Save for Web in CS3 Mac
I have Photoshop CS3 Extended 10.0.1 running on a 2.16GHz Intel MacBook running 10.4.11 with 2Gb of installed RAM and around 30% free hard disk space. Regardless of file size or dimension, Save For Web is painfully slow to load and to save out. Optim
-
Do I have to jettison my Thunderbird account. I'm a victim of the Home Depot hackers, and my mail is filled daily by often vile trash. Thunderbird won't ban this crap, as Gmail does. What do I do?