All application folders not visible on nwds

Hi,
We are using NWDI and NWDS is used as IDE.
We have created a custom b2b application on NWDS,every step was successfull.
But now we are not able to see all the folders that should be there inside the custom application.
This application is running fine also and when we checked for its content on the j2ee server itself
all the folders were there.
Does anyone have any idea,whats going wrong and what's need to be done.Somebody told me about public/private but I am not clear on that.Is that can be a reason for this problem.How to resolve this.

Hi Arshi,
I think that the public/private not causes to missing the content in NWDS. Probably some one deployed this content or application directly using the SDM password and they never check in this component and that's why the application is working fine and the content got deployed but the latest source is not available in DTR file system. So, When you sync this application form the DTR the latest you got is whatever the previous version you had and which is missing the latest content.
Thanks
Krish

Similar Messages

All custom application folders not visible on nwds

Hi,
We are using NWDI and NWDS is used as IDE.
We have created a custom b2b application on NWDS,every step was successfull.
But now we are not able to see all the folders that should be there inside the custom application.
This application is running fine also and when we checked for its content on the j2ee server itself
all the folders were there.
Does anyone have any idea,whats going wrong and what's need to be done.Somebody told me about public/private but I am not clear on that.Is that can be a reason for this problem.How to resolve this.

I copied all the folder manually to NWDS and its working fine now.I dont now the reason why those folders were missing.

Planning application is not visible in calculation manager

Hi,
I'm novice to EPMA.
I have successfully created and deployed an EPMA application,but when i'm unable to see the application(s) under planning node.
As per my knowledge EPMA application by default deployes in calculation manager,if so why the application is not visible.
any suggestions on this r helpful to me
thanks

The issue is resolved now.
The calculation manager service was set to automatic, set it back to manual and restarted calculation manager service.
It showed the application in calc manager.
Regards.
Ace

MacBook Pro is running slow and All applications getting not responding..

MacBook Pro is running slow and All applications getting not responding after every 30 seconds. I have tested by hardware test nothing wrong with hardware. I am worried Because I am totally stuck with my macbook pro Help me Please !!! I have tested by creating guest account and also new account as administrator. same thing happened. apps running. I opened activity monitor and watched carefully when any app stucked, In activity monitor there is in front of ap name following text appeared : (Not Responding) in red color. 129GB free memory, 4 GB RAM Core i3 MacBook Pro 13 inch.
Instant help needed..
Thanks in ADVANCE !!!

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

All applications are not responding when wake from sleep.

All applications are not responding when Macbook pro wake from sleep,
the keyboard and touch pad are okay.
Why?
Thanks a lot.

I want to see if there's a service that may be preventing it from working properly when waking from sleep. To test this, we'll need to Disable all non-system-critical services to see if the issue occurs.
If it does not, that means one of those services that was disabled, is causing the issue.
If the touchscreen is still unresponsive after sleep with all of those non-critical services disabled, then it may be something with the registry or the hardware.
Here are the steps to disable non-critical services:
Windows + Q to bring up Search
Type 'msconfig' and press Enter
Click the Services Tab
Check the Hide All Microsoft Services box
Click the Disable All button
Click Apply and Restart
Once it restarts let it go into sleep mode and then wake it back up from sleep mode and test the touchscreen. Do this a couple of times, if you have time. (When you're done troubleshooting, you'll have to go back into msconfig and re-enable all of those non-critical services, apply and restart.)
Let me know the results when you get a chance, please

Application Components not visible in SAP R/3 tree

Dear All,
We have standalone system and we have installed ECC 6.0 with BI Content. Harddisk is 320 GB with 2 GB RAM. We want to extract the data from R/3 to BW which are on the same system (As ECC 6.0 contains builtin BW).
In RSA1 the application components are not visible in the SAP R/3 tree under datasource tab. When I am replicating the entire SAP data source it is giving shortdump(STORAGE_PARAMETERS_WRONG_SET).
How can I replicate a particular data source to avoid the memory problems because I have only 2 GB RAM.

You can also Replicate a single datasource w/o replicating the App Comp using a FM.
BW
SE37
RSAOS_METADATA_UPLOAD
Execute
Give Source System n Datasource - Execute
*Give Datasource Name - for I_O... & Source System for Logsys.

Gmail spam folders not visible in Mavericks mail.app

I have upgraded the operating system to Mavericks on one of the Macs I use. In mail.app, I find that the Spam folder in my gmail accounts is not visible; the same is true of a number of other gmail folders that formerly appeared as subfolders of the main [Gmail] folder. I have found no mail.app preferences that might explain this disappearance. By accessing my gmail accounts via a web browser, I have confirmed that the Spam folders are still present in each.
Thanks in advance to anyone else who reports this issue and all the more so to anyone who can suggest a fix.

You have sub-folders of the Inbox???
I did see a post on Mountain Lion forum where the person had the same setup and got it back. I know I was part of the thread, but I can't find it.
You may need to remove the account and re-add it to Mail.
<Edited By Host>

Personal folders not visible in Thunderbirds after migration to new computer

I moved my Thunderbird profile to a new computer (and edited profiles.ini to point to the backed-up profile. Now in Thunderbird on the new machine I have the Local Folders Inbox, Sent, Trash, but the Personal Files folder with my saved and categorized mail sub-folders is not visible in the left-hand panel. It appears to be intact in the /Mail/Local Folders/Personal Folders.sbd/Archives.sbd folder, just not visible when I run Thunderbird.
What do I have to do to get these folders and their subfolders back again.
...Doug

Doug,
I had the same problem, and believe I found the solution. I was transferring a profile from one computer running Win XP to a new computer running Win 7.
I could see the file folders evident, as you did, using Windows Explorer to look in the profile folder, but they were not showing in the left hand pane of Thunderbird when it was running as they did in the XP machine.
I went to the "Tools" menu, selecting "Account Settings," and then clicked on "Local Folders" in the left portion of the dialog box. Then in the right portion of the dialog box under "Local directory:" I selected the "Browse" button. I then browsed down into the "...AppData\Local\Thunderbird\Profiles\xxxxxxxx.default\Mail\Local Folders\Outlook Express Import.sbd" ( in my case - the very last portion of yours might be different but should probably still be a ".sbd" file, and of course, the eight x's would be the random name Thunderbird assigns to your Profile file. ) I then clicked the "OK" button at the bottom of the dialog box. ( I believe the program then informs you it must close and restart. ) Anyway, go ahead and close Thunderbird and restart at this point.
When it restarts, my old folder structure appeared as it did on the earlier machine, and all the files were intact.

DIR, Folders not visible in Easy DMS

Hi All,
In Easy DMS 7, both public and private folders are visible but when I create any DIR or Folder within these public/private folders nothing is visible but in ECC its visible in document structure.
how to make this visible in Easy DMS?
Thank You,
Manoj

Hello,
Pass the private or public document keys to BAPI_DOCUMENT_GETLATEST2 and check if docstructure and documentdata tables are filled correctly.
Regards
Surjit

Sap J2EE Engine is not visible in NWDS

Hi ,
iam new to Sap iam Builing an Simple Application in Which SAP J2EE engine is not visible under
Window ->Preferences
can any one help me ASAP.

MY Sap J2EE Engine is Install in Remote Host and iam not getting the option Of SapJ2EE
Engine in Window->Prefrences.
iam building an Webdynpro Application In Netweaver.
1) When i Click Deploy NewArchive and Run.
2) Sap J2ee engine login Screen Come i logged in.
3) But after deployment is finish.
Iam getting an Error Saying that:
ERROR:
com.sap.ide.eclipse.deployer.api.APIException: ConnectionException,cause=[ERROR CODE DPL.DCAPI.1144] NamingException.Cannot get initial context.
Reason: Exception during getInitialContext operation. Cannot establish connection to the remote server.
     at com.sap.ide.eclipse.deployer.dc.DCClientImpl.<init>(DCClientImpl.java:70)
     at com.sap.ide.eclipse.deployer.dc.DCClientFactoryImpl.createClient(DCClientFactoryImpl.java:142)
     at com.sap.ide.eclipse.deployer.DeployerPlugin.getClient(DeployerPlugin.java:201)
     at com.sap.ide.eclipse.sdm.threading.DeployThreadManager.deploy(DeployThreadManager.java:359)
     at com.sap.ide.eclipse.sdm.SDMManager.deployArchives(SDMManager.java:149)
     at com.sap.ide.webdynpro.archivebuilder.ActionDeployArchive$DeployJob.run(ActionDeployArchive.java:214)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
can you please help me with is error.

Default Web Application is not visible in Weblogic Console

We are using Weblogic 5.1.0 SP7
          We moved our Application from the Implicitly Defined Default Web
          Application which is configurated by the
          weblogic properties to a Web Application. Because we don't want to
          change any URL in our Application, we
          decided to deploy it as Explicitly Defined Default Web Application.
          By this we recordniced that the weblogic.httpd.defaultWebApp property
          worked not that way descibed in the
          Weblogic Documentation. You have to write the path to the WebApp not the
          name!
          So we have the following Entry in the weblogic.properties:
          weblogic.httpd.defaultWebApp=i:/if_home2/web
          This works fine. The Server starts and serves the WebApp the way we
          expected. But wenn we start the Weblogic
          Console the WebApp ist not visible in the "myserver/HTTP/Servlet web
          applications" folder. This one is empty
          now! Previously the "General" Entry for the Implicitly Defined Default
          Web Application was shown here, which
          showed our Servlets and JSP's and their hit count and parameters.
          So there is no chance to monitor the Servlets and JSP's of the default
          Web Application.
          I tried to deploy our WebApp a secound time with
          weblogic.httpd.webApp.OurApp=i:/if_home2/web
          but this create a second independent WebApp. OurApp is shown in the
          Weblogic Console but it does not monitor
          the hits to the default WebApp. So this is not a solution!
          Any idea to make the default Web Application visible in the Weblogic
          Console?


in my development environment i checked in site collection feature, it isn't available in site collection feature but still i am getting those web parts in web part gallery while adding it on page.
Also, in Production environment, feature is available in /templates/features folder after deployment, but not available in web part gallery while adding it on page.
I tried with uploading .webpart file which is available in /templates/features production environment as i mentioned, is running for one web part. Not for second web part and giving me security error.
As, uploading .webpart file is not feasible solution, please tell me how could i do that with .wsp file?
please tell me what could be another workaround.

Cache folders not visible

Has anyone else noticed that the cache folders are not visible under OS X 10.7? I found a forum where a user had posted a supposed 'fix' by using the Termial App, and the following command:
chflags nohidden ~/Library/
However, this did not seem to work for me.
As an aside, I bought my frist Apple IIe when I was in 7th grade, been a LOYAL Apple user ever since. However, Lion just flat out *****. No pretty way to say it. Hangs, Safari crashes, email crashes, Time Machine hang ups, etc, etc, etc.... If I had a dollar for every minute I have sat and whatched the pinwheel................
Thanks for any help/advice.

Yes. That must be the issue. When I tried your suggestion, I received the following message:
The file /Users/yourHome/Library/Caches does not exist.
I first noticed this issue when I was trying to locate the cache folder for Opera (browser). I can see it is saving files to `Library/caches/Opera/temporary files. I just can't locate the Opera cache folder.
Thanks for the suggetion.

Default Web Application ist not visible in WebLogic Console

We are using Weblogic 5.1.0 SP7
          We moved our Application from the Implicitly Defined Default Web
          Application which is configurated by the weblogic properties to a Web
          Application. Because we don't want to change any URL in our Application,
          we decided to deploy it as Explicitly Defined Default Web Application.
          By this we recordniced that the weblogic.httpd.defaultWebApp property
          worked not that way descibed in the Weblogic Documentation. You have to
          write the path to the WebApp not the name!
          So we have the following Entry in the weblogic.properties:
          weblogic.httpd.defaultWebApp=i:/if_home2/web
          This works fine. The Server starts and serves the WebApp the way we
          expected. But wenn we start the Weblogic Console the WebApp ist not
          visible in the "myserver/HTTP/Servlet web applications" folder. This one
          is empty now! Previously the "General" Entry for the Implicitly Defined
          Default Web Application was shown here, which showed our Servlets and
          JSP's and their hit count and parameters.
          So there is no chance to monitor the Servlets and JSP's of the default
          Web Application.
          I tried to deploy our WebApp a secound time with
          weblogic.httpd.webApp.OurApp=i:/if_home2/web
          but this create a second independent WebApp. OurApp is shown in the
          Weblogic Console but it does not monitor the hits to the default WebApp.
          So this is not a solution!
          Any idea to make the default Web Application visible in the Weblogic
          Console?


Hello Nadar,
Tell me how are you starting server in the cluster, through nodemanager or commnadline.
Kuldeep

Captivate 6 - Trying to make all click boxes not visible in output

Adobe Captivate 6 - how do you make all the click boxes not visible in output. Help says to uncheck the Visible in Output box, easy enough, then it say to click the Apply to all icon and there is no such icon. Do I have to go through every single slide and manually do each one?

Hello and welcome to the forum,
I think you want to 'hide' the click box, so that it is not active, in the Properties panel? A click box itself is never visible to the user on the stage, but can be active or not.
I always copy/paste an invisible object, it will keep its properties. Since a click box has no style, you cannot apply a style to all click boxes.
Lilybiri

Sub Folders not Visible through File Shares

Hi there,
Have recently moved a company's data share over from a 10.4 box to a Leopard Server. I have setup Home drives for all the users - all groovy.
However I have set up the company share and copied all the folders in there. This is pretty straightforward - everyone wants access to everything. Simple...you'd think. So, I have assigned the LDAP group that all users are in Full Control of this folder (the share point) and hit Propagate permissions. However, certain folders remain inaccesible to them and one in particular is very weird - users can navigate to Share Name\Folder\sub folder but then cannot see the files and folders inside. The permissions on the folders inside are Everyone Read/Write and if I logon to the server itself as one of the affected users I can see the files locally in the share and can read/write to them. Anyone got any idea what could be going on please?
Cheers
Si

If i read this correctly you are going the other way but copying files from Windows XP to a Windows 7 machine will cause networking to drop out on the Win7 machine, you have to do some registry tweaks for the networking for it to not drop out. I've run into
that several times.
If that has nothing to do with your issue the only thing i can think of is an issue with your script causing it to delete or not successfully copy the files. I've used xcopy /dicey for lots of things without an issue though. Perhaps it is something with
your exclusions or symbolic links. Maybe drop the /v off and see if that makes a difference?

All application folders not visible on nwds

Similar Messages

Maybe you are looking for