All applications are opening/quitting very slowly or not at all.

Hi, I have a question about my MacBook Pro. Lately, when I've been opening or quitting different applications, they take several seconds to open, and they often say "Application not responding", and I have to force quit. I'm not sure what to do. Any suggestions would be appreciated. Thank you.

A few tips you can try:
http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh17.html
You can also boot from an installer disk, and run diskutility to repair the HD.
This article refers to starup troubles, but can also be used for other issues as well
http://docs.info.apple.com/article.html?artnum=106214
If none of this helps, post back for other ideas.
Jeff

Similar Messages

  • When I write an email it responds very slowly or not at all. Can this be fixed?

    Using firefox 10.0.1 when typing in email (Hotmail) it responds very slowly or not at all. This has happened for the past week. Before that time this was not a problem.

    It MAY be that Adobe software slowness problems are caused by having a network
    printer as default... with the cure being to always have a local printer as a
    default (you don't have to USE it, just have it set to local as default) and
    this may be accomplished by using an Adobe Generic Printer Driver
    http://www.adobe.com/support/downloads/product.jsp?product=pdrv&platform=win

  • PDF files open very slowly or not at all.

    I am experiencing an issue on a clients network where most pdf files open extremely slow or not at all. This issue is being experieced by both pc and mac uses, computers on and off the domain. Any one connected to the network. Has anyone seen an issue like this before. We are currently having Cisco troubleshoot the internet router but are not currently seeing any issues there. The isp has indicated that the circuit has tested cleanly. The issue is even seen when trying to download the pdf, it just seems to hang around 80-90 percent of the download.
    Any help on this issue would be greatly appreceiated.

    It MAY be that Adobe software slowness problems are caused by having a network
    printer as default... with the cure being to always have a local printer as a
    default (you don't have to USE it, just have it set to local as default) and
    this may be accomplished by using an Adobe Generic Printer Driver
    http://www.adobe.com/support/downloads/product.jsp?product=pdrv&platform=win

  • Why are most of the apps (anything that has to search) on my iphone4 and ipad (1) running very slow (or not at all) since iOS5 update...esp google. Search seems to go quickly, but then when I try to open a link..nothing. I have turned off icloud.

    why are most of the apps (anything that has to search) on my iphone4 and ipad (1) running very slow (or not at all) since iOS5 update...esp google. Search seems to go quickly, but then when I try to open a link..nothing. I have turned off icloud.

    I am having the same problem. Did turning off iCloud work? Did you just turn everything off or did you actually delete the account off your iPod?

  • I just used a firewire connection to transfer files from an older MAC to a newer MAC. My newer MAC has lost all that was on it, and all the applications are opening like they have never been used before and asking for Rosetta. Help!!!

    I just used a firewire connection to transfer files from a PowerBook G4 to a MacBook Pro. The MacBook Pro has lost all that was on it, and all the applications are opening like they have never been used before and asking for Rosetta. How do I find all my files on the MacBook Pro, or undo what I have done???

    IGNORE the last post: he thought you are using Lion or Mountain Lion.
    Since you are using Snow Leopard, you need to install Rosetta.  It can be found on your Snow Leopard Install DVD in the Options section.
    Once installed all should be well again.
    Also, if your computer is connected to the internet when the Dialog Box about PowerPC applications comes up, it MIGHT allow you to download Rosetta from the internet.  There has been some discussion that Apple has discontined internet download of Rosetta into Snow Leopard.
    Someone else will have to address your lost files problem.

  • I have Maverick installed and my mail, Safari, Mac App Store, and iMessages apps all say that they quit unexpectedly and will not open.  Any suggestions?

    I have Maverick installed and my mail, Safari, Mac App Store, and iMessages apps all say that they quit unexpectedly and will not open.  Any suggestions?
    Process:    
    Mail [605]
    Path:       
    /Applications/Mail.app/Contents/MacOS/Mail
    Identifier: 
    com.apple.mail
    Version:    
    7.2 (1874)
    Build Info: 
    Mail-1874000000000000~1
    Code Type:  
    X86-64 (Native)
    Parent Process:  launchd [164]
    Responsible:
    Mail [605]
    User ID:    
    501
    Date/Time:  
    2014-05-01 22:11:44.754 -0500
    OS Version: 
    Mac OS X 10.9.2 (13C64)
    Report Version:  11
    Anonymous UUID:  5D0F67F3-4D58-F054-66B6-24017FD68ADC
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
    VM Regions Near 0:

    I will check.  Can the security update be installed if you can no longer open the Mac App Store app?
    I was listening to the MacCast podcast and the host had a similar issue and did something similar to the link below.  I am concerned that I may mess something up by doing this.
    http://macs.about.com/od/usingyourmac/qt/Fix-Spod-How-To-Fix-A-Spinning-Pinwheel -Of-Death.htm

  • After reinstalling Yosemite 10.10.2 Bridge opens folders very slowly.

    After reinstalling Yosemite 10.10.2 Bridge opens folders very slowly.

    Thanks Ian! I see the other topics now, and I did the deauthorize thing, although it said this computer was not authorized (I know it was because I just bought songs on it.) So I authorized it again and now it works fine! Except now it says there are 3 computers authorized, I only have 2. I guess it thinks this computer is authorized twice now somehow? I hope this bug gets fixed.

  • When I run the Receiving interface i get an error that the period is not open.  But all periods are open from Jun 14 through April 15.

    I am running the following inserts and all periods are open but I still get this error in the po_interface_errors table.
    "Error: Please enter a GL Date within an open inventory accounting period.
    Cause:        You provided a GL date that is not within an open inventory accounting period. 
    Action:        Enter a date that is within an open period."
    Here are the inserts.
    INSERT INTO rcv_headers_interface
    (header_interface_id, GROUP_ID, processing_status_code,
    receipt_source_code, transaction_type, last_update_date,
    last_updated_by, last_update_login, creation_date, created_by,
    vendor_id,expected_receipt_date, validation_flag)
    SELECT rcv_headers_interface_s.NEXTVAL, rcv_interface_groups_s.NEXTVAL,
    'PENDING', 'VENDOR', v_transaction_type , SYSDATE, v_user_id, 0,SYSDATE, v_user_id,
    v_vendor_id, SYSDATE, 'Y'
    FROM DUAL;
    INSERT INTO rcv_transactions_interface
    (interface_transaction_id, GROUP_ID,
    last_update_date, last_updated_by, creation_date,
    created_by, last_update_login, transaction_type,
    transaction_date, processing_status_code,
    processing_mode_code, transaction_status_code,
    po_header_id, po_line_id, item_id, quantity, unit_of_measure,
    po_line_location_id, auto_transact_code,
    receipt_source_code, to_organization_code,
    source_document_code, document_num,
    destination_type_code,
    deliver_to_location_id,subinventory,
    header_interface_id, validation_flag)
    SELECT rcv_transactions_interface_s.NEXTVAL,
    rcv_interface_groups_s.CURRVAL, SYSDATE, v_user_id,
    SYSDATE, v_user_id, 0, 'RECEIVE', SYSDATE, 'PENDING',
    'BATCH', 'PENDING', v_po_header_id,v_po_line_id,
    v_item_id, v_quantity,
    v_unit_meas_lookup_code,
    v_line_location_id, 'DELIVER', 'VENDOR',
    v_organization_code, 'PO', v_po_number,
    v_destination_type_code,
    v_deliver_to_location_id, v_destination_subinventory,
    rcv_headers_interface_s.CURRVAL, 'Y'
    FROM DUAL;

    I went to Inventory > Setup > Organizations  
    but I do not see a place to open a period under an organization. If there is another place to go let me know.
    I looked under calendars but that does not have anything to do with periods as far as I can tell.

  • Why don't tabs that are open on my iPhone appear in Show All Tabs on my MacBook Air?

    When I select Show All Tabs in Safari 8.0.3 on an early 2014 MacBook Air, I see the tabs that are open on my iPad but not those that are open on my iPhone 6. I recently updated the phone to iOS 8.2. All my devices are connected to my iCloud account and Safari is checked in my iCloud settings on the phone. So I don't understand why the phone's open tabs no longer appear in Show All Tabs on the MacBook Air. The iPad is an iPad 2 and it's still running iOS 8.1.3. Am I right in guessing there's a problem with the iOS 8.2 update?

    Hi califgrl,
    If you are having issues using iCloud Tabs on your iPhone, you may find the information and troubleshooting steps outlined in the following articles helpful:
    Set up and use iCloud Tabs - Apple Support
    Get help using iCloud Tabs - Apple Support
    Regards,
    - Brenden

  • If I can close the Email Id some person open the email id & showing History all persons are opening what I can do please intimate for me

    I am closing Email Id - History - that show all messages and all persons are opening my email id. what I can do and tell me my quries

    Hi meghage,
    From your code, it is a WebForm project.
    This forum is to discuss problems of Windows Forms. Your question is not related to the topic of this forum.
    You can consider posting it in asp.net forum for supports . Thanks.
    ASP.NET: http://forums.asp.net
    Regards,
    Youjun Tang
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Hi ! I have an iPhone 4s , bought it from apple company , I have charging problem , very slowly , it sometimes takes all day of charging , please helpe ...

    Hi ! I have an iPhone 4s , bought it from apple company , I have charging problem , very slowly , it sometimes takes all day of charging , please helpe ...

    In most countries they will do so for a fee. US$199 for a 4S. It may just need a new battery, which Apple will install for about US$70.

  • I am using Wnndows XP, where i am using IE & Firefox 3.6(default), but no websites are opening in Firefox but in IE all websites are opening ?

    I am using Wnndows XP, where i am using IE & Firefox 3.6(default) is installed.
    But when ever i am trying to open any websites they are not oppening in Firefox but in IE all websites are opening ?
    If ay changes with the system setting is required please send the path.

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • All applications are not responding when wake from sleep.

    All applications are not responding when Macbook pro wake from sleep,
    the keyboard and touch pad are okay.
    Why?
    Thanks a lot.

    I want to see if there's a service that may be preventing it from working properly when waking from sleep. To test this, we'll need to Disable all non-system-critical services to see if the issue occurs.
    If it does not, that means one of those services that was disabled, is causing the issue.
    If the touchscreen is still unresponsive after sleep with all of those non-critical services disabled, then it may be something with the registry or the hardware. 
    Here are the steps to disable non-critical services:
    Windows + Q to bring up Search
    Type 'msconfig' and press Enter
    Click the Services Tab
    Check the Hide All Microsoft Services box 
    Click the Disable All button 
    Click Apply and Restart
    Once it restarts let it go into sleep mode and then wake it back up from sleep mode and test the touchscreen. Do this a couple of times, if you have time. (When you're done troubleshooting, you'll have to go back into msconfig and re-enable all of those non-critical services, apply and restart.)
    Let me know the results when you get a chance, please

  • Web pages load slowly or not at all.

    At least half the web pages I try to access load slowly or not at all, especially those I am accessing for the first time. This problem has been getting worse over the past few months. I ran the Wireless Diagnostics test, and it said there didn't seem to be a problem.     I am using a Belkin G Wireless Router, and only use the MacBook Air at home.  The PHY Mode is 802.11g.  What should I do?

    Try going to Speedtest.net (if you can ) and see what your speeds are. If they seem fine then try turing off or resetting your router. If that doesn't work it might be something with the Wi-Fi antena within the MacBook Air. Try connecting it via Ethernet.

  • Hi there, I have much files saved on pages ( ios ipad) , I just open it today and did not find .all the files !!!! Just 4!!! Taken in consider that I did not delete or making any wrong action. How I can return the lost files!!!! Help please

    Hi there, I have much files saved on pages ( ios ipad) , I just open it today and did not find .all the files !!!! Just 4!!! Taken in consider that I did not delete or making any wrong action. How I can return the lost files!!!! Help please
    its very important files!

    tis true
    I know, I always do that but I was in a rush to get somewhere and I was relying on my thousand dollar Mac to do some kind of recovery or something. I know Microsoft always keeps temporary files (I think Mac does too, part of me asking here in this forum was for someone to tell me where I can find those files) and when you go to open Office Works then it gives you the option of opening the last recent documents, saved or not saved.
    I usually copy paste into my emial just in case something goes wrong with the created document but I just didn't have the time to login and do all that My loss, you live and you learn, BUT still if ANYONE got any info on this, PLEASE DO CHIME IN *keeping the hope alive*

Maybe you are looking for

  • New MacBook Pro - continue with Time Machine backups or start over?

    I'm unsure of how I should proceed here ...  My old (late 2008 aluminium unibody MacBook) died last month and I now have a shiny new MB Pro.  I transferred my data from one of two backup drives I have using Migration Assistant but did not transfer th

  • Time Series in Discoverer.

    Hi, wondering if anybody knows how I can use time series functionality in Discoverer3.1 and 3i?

  • Driver won't load

    I created a new boot cd with the BroadCom 57xx driver on it but the driver won't load. When I type the command in to load the driver it says that the file doesn't exist. If I change to the path it says it is getting the file from and load the file fr

  • UD Connect Generated SQL Statement

    Hi All, Can anyone tell me if it's possible to influence the generated SQL statement?  We need to be able to use the order by clause so as to get the records in the correct order. Any help much appreciated. Thanks Craig

  • Where can I find study material on banking system!

    need study material on banking system.