All bags what I found for whole time using InDesign, especially DPS, but haven't fixed yet

sorry, in russian only. I know many bugs already have been written here in community but anyway.
— индиз часто висит. на ровном месте. без причин (например, при переходе на след полосу); да о чём тут говорить! это самая зависающая и падающая программа.
— бывает вылетает при добавлении файлов в фолио на половине прогресса.
— пора бы сделать добавление статей в билдер через драг-н-дроп;
— пропадает меню с редактированием фолио;
— постоянно разлогинивается фолио. бывает, только со второго раза удаётся зайти. версия программы легальная.
— следующее работает через раз: ссылку, например, на внешний ресурс, выделив текст, уже не сделать (панель Hyperlinks). только через наложение фрейма поверх текста и создавая из него кнопку. в скроллах это уже не работает .
— часто невозможно поменять язык ввода. приходится перезапускать программу. в других программах Adobe всё нормально. это заметно только в индизайне.
— иногда нельзя переместить объект в группу других объектов через панель слоёв. в это время объект остаётся на своём месте, но обозначение в виде чёрной полоски в панели, что объект якобы переместился, остаётся.
— очень часто вылетают шрифты. индиз их просто не видит, а в системе они, конечно же, есть.
— в шестой версии: я скопировал название файла и хочу сохранить файл под этим именем в другом месте, но в русской раскладе текст не копирует и не вставляется в окно Save As.
— mac only: при смене порядка вкладок открытых файлов переключение между ними через cmd ~ почему-то не меняется согласно новому порядку, если я их поменял по своему усмотрению, — остаётся как прежде, то есть скачет между ними так, как они были открыты изначально. в версии для windows, помнится, всё нормально работает.
— не поддерживается обтекание в скроллах
—заметил следующее: если скопировать статью из одного фолио в другое, не будут работать кнопки перехода на страницы.
— нельзя задавать приоритет интерактива и обычного содержимого, перенося объекты выше или ниже остальных. то есть обычный контент всегда проигрывает интерактиву. например, я создаю интерактив, который перекрывается колонтитулом. для того, чтобы последний не закрывался в дальнейшем интерактивными элементами, мне надо из колонтитула также сделать, например, мультистейт.
— было бы здорово задавать в мультистейтах swipe до определённых стейтов. допустим, у меня первый стейт пустой, для закрытия, и, если включить swipe, то слистывая назад до первого стейта, читатель доходит до пустого стейта — всё, шляпа!
— если на странице скролл на всю страницу или на большую её часть, сложно уйти на другие страницы. для этого надо делать засоряющие макет пустые кнопки или мультистейты.
— не видны мультистейты в превью страниц на айпаде
— почему нельзя выставлять произвольные значения в folio overlay? не смотря на то, что окна со значениями открыты для редактирования, все вводимые числа округляются до кратных 0,125.
— для чего придумали выбирать Raster и Vector  в скроллах и слайд-шоу, когда vector всё равно самый выгодный? хорошо, что в скроллах вектор выставляется автоматом, а вот в слайд-шоу всегда ручками нужно изменять на вектор. всегда! потому что нужно учитывать ретину.
— очень "жидкий" набор эффектов, работающих на айпаде.
— не всегда можно распределять через клавиши порядок объектов внутри мульти-стейта.
— все векторные объекты в кнопке, если она в мультистейте, растритуются. это не зависит от того, что в мультистейте стоит галочка вектор.
— при добавлении нескольких команд к кнопке нельзя выставить приоритет, перетащив важную команду выше второстепенной. хотя функция перетаскивания и есть, но положения не фиксирутся.

all these bags are not depend on version. some of them I found out in CS4 (not DPS) — for example spontaneous crash without obvious reason or jumping between opened documents (see point 11 of my list) when I use cmd~. Others I did in CS5 and do in CS6 right now.

Similar Messages

  • HI All, send me flow chart for whole mi process from client to backend sys

    HI All, send me flow chart for whole mi process from client to backend system .
    means that The process  whe the synchronization is trigerred on a client device . Pls its Urgent .pls send ASAP.
    Thanks&Regards.
    Bharat Kumar .

    Hi,
    have a look here:
    http://help.sap.com/saphelp_me21sp2/helpdata/en/5a/386cc01dd1c7489e237d532841d407/content.htm
    Hope this helps to answer your question.
    Regards,
    Oliver

  • New Discussions: for day time use only? (-: A darker blue, please!

    Thanks a lot Mods for your efforts.
    I spend some time on these boards every day, so I can see things are going better and better.
    I like the new Discussions better than the previous, especially everything that comes with this new ability to put much more on one page (like being able to see A LOT (not only five) of "Recent topics in this category", or that the topic's titles can be longuer than before, or being able to read the whole thread without jumping to "the next 15 posts" like before. I set "My Posts" to "50", this too was not possible before. Etc.)
    Now my request:
    At first I thought, like many others, that the "blue dot" and the "blue half-dot" were too small, and that we couldn't see the small grey "New!" because it was not red.
    Now after all this time since Nov14, I finally understood what was wrong, because
    (1) the new kind of eye fatigue I didn't experienced before, and
    (2) a change in my computer's room lighting configuration.
    The real problem is not the blue dot size (altough I'm sure if it was a square it would work better), it is its environment.
    We have a white line after a light blue line, and this is a great feature to differenciate between topics. Works great within a thread too, to differenciate posts.
    But one side effect of this is that the whole page "feels" slightly blue.
    I'm not sure, but a human eye physicist could perhaps explain another kind of (more insidious?) side effect caused by the alternance of lines. Perhaps depending on which color are chosen for them?
    Anyway, there is no problem with a page that "feels" blue, when the text is black.
    The problem starts when the text ALSO is blue. Especially light blue...
    I find the text blue color too light. Even the "visited link" purple is too light.
    Given that the background is blueish, I mean. Otherwise it'd be fine.
    This was not easy to understand, because the [defect/effect] is not obvious: the overall picture is nice.
    But it became obvious to me when I saw that I have no problem IF I set my screen's brightess to "very bright".
    New Discussions: for day time use only?
    ==> Please, would it be a problem (or too difficult to set perhaps?), to try a darker blue text for two or three weeks, see if we like it better? (along with a slightly darker purple for the visited links).
    Thanks again for all the great work!
    Axl

    Hi Axl,
    Some one had posted this about color,I do not remember who,sorry.
    I thought it was interesting.Hopeful this color issue can be alter but deepening the colors as you & many have requested.
    http://www.grc.nasa.gov/WWW/usability/colorcss.html
    Good luck, Eme

  • X230 - Setup Is Preparing Your Computer For First Time Use

    Dear all, 
    I just received my X230 bought on Ebay and as I first turned on the computer, Windows was frozen and showed "Setup Is Preparing Your Computer For First Time Use" for hours (I guess its a whole day). Since I do not have any recovery media provided, does anyone has alternative solution? 
    Thanks in advance!

    Thanks! It took me a whole day to figure out what happened and I ended up format the whole drive and reinstall the windows. Yes, you are right, X230 is a good machine and acutally I was thinking to puchase X240 since there is kind of back to school program that you can purchase X240 at a deep discount price. After so many bad comments I chose X230 instead for: 
    1. Physical Trackpad button (which is extremely important as I ONLY use trackpoint) 
    2. 2 ram slots 
    3. normal voltage CPU
    I am surfing the net with X230 and I am so happy I bought this.

  • What port number for Desktop Sharing using in Lync Server 2013 and Lync Online

    Dear All,
          My environment using Lync Server 2013 and Lync online on Office 365. I don't want my user using Desktop Sharing feature. then I need to know what port number for Desktop Sharing using in Lync Server 2013 and Lync Online.
    I will deny this port on personal firewall each client.
          Thank you for your advise.

    Hi,
    I'm not sure you'd be able to do this with ports without impacting other application sharing features such as Q&A, Whiteboard, Poll etc - I'm pretty sure they all come under the same umbrella of ClientAppSharing.
    Ordinarily you would create or modify your conferencing policy to restrict sharing to single programs only using a cmdlet similar to below;
    Set-CsConferencingPolicy -Identity "Global" -EnableAppDesktopSharing SingleApplication
    This would disable desktop sharing but enable users to continue sharing other single programs. If you want to remove that functionality too, then replace the 'SingleApplication' parameter with 'None'. Then users won't be able to share any programs either.
    This is the correct way to do it as the icons will be greyed out for the users. Doing it your way, they would still be able to click them, and it would throw an error - this will lead to a lot more support calls and people assuming a service is broken.
    I hope that helps some.
    Kind regards
    Ben

  • How can I sync my photo contents in iPhoto on my iMac to my new iPAD's iPhoto?  I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but I cannot find "phone button" under Device name on iTunes page. Please help!  Thanks!

    I follwed all the instructions on manuals for both iPAD and iTunes re syncing, but after physically connecting iPAD with iMac with USB or via WiFi I still cannot find "phone button" under Device name on iTunes page. Please help!  Thanks!
    I have been creating a photo book using a lots of photographs on iPhoto, and then I took another photos by using new iPAD which I want to integrate with the original album/book on iMac. I was able to import them from iPAD's iPhoto to iMac's iPhoto.  However I cannot import or transfer or sync anything from iMac's iPhoto to that of my iPAD. 
    So my iPhoto page on iPAD contains only 3 or 4 newly created albums, and no other info.  That means no syncing....
    I am supposed to be able to work on this project on either of these iPAD and iMac, correct?
    I am puzzled.  I appreciate for your advice and help.
    Thank you!

    It doesn't appear under the iPad device on the left-hand sidebar of iTunes, you need to select the iPad device on the sidebar and then select the Photos tab on the right-hand side of iTunes e.g.
    And then on the right-hand side :

  • I receive an error message every time I close a file "The Organizer base is damaged and will reset the next time Acrobat is launched." But it never fixes itself. What's the fix?

    I receive an error message every time I close a file "The Organizer base is damaged and will reset the next time Acrobat is launched." But it never fixes itself. What's the fix?

    Hi mjsa1,
    Please see Error "The Organizer Database is damaged and will be reset..." | Acrobat 9.
    If you're still having trouble, please let us know!
    Best,
    Sara

  • Computer keeps Configuring and setting up for first time use

    I have a toshiba A505-S6980 that has been working fine for a couple years.  Recently I had performance issues and suspected virus, spyware so I did a recovery with the original discs I made when I first got the computer.  Four of the six discs reloaded fine.  It did not ask for the last two discs "Environment 64 bit and Applications and Drives.  I also have a System Repair disc.  After loading the four recovery discs the computer now keeps recycling between preparing for first time use, configuring system, reboot and then back to preparing for first time use,etc.  I think I'm close to getting this, but need a last bit of help.
    Thanks

    It's been a couple days since you posted this problem. Did you get anywhere, or are you still stuck in that loop? If it's still stuck, you may just want to perform the recovery again.
    - Peter

  • SQL Server Management Studio - Configuring the environment for first time use

    Hi
    I have recently switched my local 'My Documents' folder location to a network drive that I 'make available off line' to allow on-line/off-line work and synchronisation when I am working in and out of the office.
    When I load my SQL Server Management Studio 2005 I frequently get 'Microsoft SQL Server Management Studio is configuring the environment for first time use'.
    Management Studio  them loads and I can continue without problem.
    I am guessing it is trying to make reference to some settings file. Any ideas? I wonder if I can change/move these settings elsewhere to a local drive?
    Thanks

    Hi,
    There is bug report of this issue:
    http://connect.microsoft.com/SQLServer/feedback/details/126364/configuring-enviroment-for-the-first-time-every-time-in-ms-sql-server-management-express
    "SQL Server Management Studio Express saves the settings for the user in ...\Documents and Settings\<User Profile>\Local Settings\Application Data\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM
    and in ...\Documents and Settings\<user profile>\Application Data\Microsoft\Microsoft SQL Server\90\Tools\ShellSEM
    if any of these files are not available or unusable, SSMSE will generate new ones."
    Hope this helps.
    BR,
    JoukoK

  • I am currently using a Iphone 4.I have been trying for countless times to restore my phone but error 16 keeps on popping up.This happened after i updated to the latest IOS.Does anyone have any solutions other than jail-breaking.I have never jailbreaked.

    I am currently using a Iphone 4.I have been trying for countless times to restore my phone but error 16 keeps on popping up.This happened after i updated to the latest IOS.Does anyone have any solutions other than jail-breaking.I have never jailbreaked.I am deperate to restore my phone...Please help!!!!

    Most likely a hardware failure, & if so, you won't be able to restore/activte your phone. If you've tried at least two times, & are still getting this error, make an appointment at any Apple store, or call AppleCare.

  • Why does my iMac, running snow leopard, turn on by itself? I have looked for anything that might be causing this, but haven't found the solution.

    I have an an iMac that turns itself one everyday at the same time. I am trying to stop this but haven't found what's causing it. What is causing this?

    Check the schedule in the Energy Saver pane of System Preferences.
    (74319)

  • I am trying to update software for face time on my iPad 2, but it won't connect.

    I am trying to update software for face time, but it won't connect.

    There is no update for FaceTime as it is included with iOS 7.0.4.
    What specifically is your problem with FaceTime? Do you have a wifi/internet connection?
     Cheers, Tom

  • TS4036 my ipad wifi cellular 16 GB 4G switched off inbetween and is not switching on at all. I have tried to restart by using sleep/wake button, but red slider does not appear. I have recharged battery, still no response. what should i do?

    My iPad Wi-Fi cellular 16 GB 4G switched off suddenly, even when the battery was 40% available. It is not switching on again, i have tried restarting by using sleep/wake button, but red slider does not appear. I kept it off like it was overnight, in the morning agin recharged it, but still it is not switching on. it is not responding, except when i connect the charger, it gives a blink noise that recharge has started. I removed the SIM and tried restart it but no response, What should i do to restart it please?

    Seems to be working again, I haven't done anything though. And the "wifi" led on my laptop is off, which should mean that the interface is down.
    This is driving me crazy I don't understand how the all thing works, if anyone has any tips that would be very nice.
    Thanks!

  • Preparing images for Dreamweaver cs3, using InDesign for templates

    Hi, I'm about to start putting all my files together for my
    website, but need to know in what form to save my images. I know
    they should be jpegs or gifs, but what resolution, and what size?
    Should I size them close to the size I want to see them on my
    website? For example if I want to make a little linked (like a
    thumbnail that you click on) image of a painting, and have the full
    size image of that painting open up, should I save that image in
    two different sizes?
    Also, the tutorial I'm learning from says I can make a
    template for use in Dreamweaver, with Photoshop or Illustrator, but
    I'd rather use InDesign. Can I use InDesign files as templates in
    Dreamweaver? If so, in what form should I save them?

    > Can I
    > use InDesign files as templates in Dreamweaver?
    it won't be of any practical use, except to print out and use
    as a guide.
    on the images, make them the PIXEL size they need to be in
    the web page.
    If you aren't sure yet what exact size they will be, make
    them a bit
    oversize. Then after changing the html display size of them
    in dreamweaver
    (click on the image, then press shift key and drag corner of
    image to
    resize) you can jot down the pixel size shown in the dw
    properties
    inspector, and resize the image in an image editor to those
    pixel
    dimensions. For a resolution, just use 72 ppi as a number to
    put there.
    It's the pixel dimension that matters.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Whats the datatype for the time in the format mm:ss.ms

    Hello Sir,
    I wanted to create a table with a field called time.
    what should be the datatype for this field contains the value as in the format mm:ss.ms(04:53.0).
    waiting for ur reply.
    regards
    pannar

    Actually, i need to read some time values from excel sheet and store them into a table. it should contains the field time with the value something like
    (05:21.1) ie mm:ss.ms).
    if i put varchar2, i will be in trouble at the time of querying the table with some condition like fetch the records only the time duration less than 3 mins or something like that!
    in this case, what data type finally fits to do this?

Maybe you are looking for

  • Mixing RAM--Speed differences

    Hi, I ordered 4x1 GB DDR2 PC2-4200 non-ECC memory from an online vendor. I recieved instead 4x1 GB DD2 PC2-3200 non-ECC memory. I installed it and the system sees the memory but now I have a mixed bag... DIMMO/J6700 256 MB DDR2 SDRAM PC2-4200U-444 (e

  • Problem with file transport

    Hi , I am transporting some of my XI 3.0 objects from XIQA to XIPROD. When I am importing the objects in XIP I am getting numbers of problem. 1- Scenarios SOAP to RFC . when I am activating the objects it saying Communication Channel | PRD_400 | RFC_

  • Cs4 tab switching annoyance

    Hi, does anyone know how to stop CS4 from using the ctrl key to switch ALL tabs between views instead of just the current one? The problem is that whenever I try to switch from code view to design view using the shortcut ctrl+` dreamweaver assumes th

  • K1: apps are forced close + can't connect to internet + can't factory reset

    All of a sudden, my ideapad K1 keep poping up messages saying that **** has stopped unexpectedly and force close.  I try to upgrade the fireware while realize there is no wifi connect (the wifi works well on my other devices). After trying tons of me

  • Unable to start oc4j instance

    Hi, My application was running well. But since last two days oc4j instance is not starting up. I reinstalled developer suite 10g release 2. But the problem is still there. A flash comes when i click start oc4j instance. Even i m not able to read the