All browsers crashing on iMac running OSX 10.8.

I'm running OSX 10.8.3 on an iMac late 2012 and  every time I open a browser, Safari, Chrome or Firefox it immediately crashes. I happened to have chromium installed which is working but that is it. I'm going to track down some error logs, but any ideas about why this is happening?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • How do I go about saving ALL data on an imac running 10.5.8 and wipe the harddrive and install an new OSX

    I have an old imac running OSX 10.5.8 which for various reasons was never updated further
    Processor is 2.4GHz Intel Core 2 Duo
    memory 2 GB 667 MHz DDR2 SDRAM
    It has iphoto 08 7.1.5 (378)
    I also have a macbook Pro.  Running OSX 10.7.5
    Processor 2.4 GHz intelCore i5
    memory 4GB 1333 Mhz DDR3
    This one runs iphoto 11 v 9.2.3 (629.52)
    On Both these Machines I want to save all the files  and particularly the photos to an external hard drive.   I can do the files etc but having problems with iphoto.  I want a complete functional copy of both libraries in iphoto and I want to be able to access it and pick and choose which ones I want to use  but not STORE on a new Macbook.  I want to access the photos from several machines and just browse through them.
    Then ..  once I have a proper copy of everything  I want to reformat the old imac and install the newest OSX it will run given its Processor etc.    any advice on which OSX it can cope with?
    Also possibly upgrade the  macbook pro , so that they talk to each other properly, will access icloud and will also both be compatible with a new macbook pro running Yosimite... 
    But I want to be able to pick and choose which files I move to the new macbook. Both photos and general filing.
    This may be easy for an expert but I am not an expert, I am reasonably competent.. but definitely not an expert and I don't want to mess up and lose stuff.
    can anyone help?

    Click here and buy the DVD.
    (115929)

  • HT4914 I want to transfer my entire iTunes "folder" from a newer iMac 3.06 GHz Core 2 machine running iTunes 10.7 to an older iMac running OSx 10.5.8. How best to do this and keep all my data, tags and covers in tact?

    I want to transfer my entire iTunes "folder" from a newer iMac 3.06 GHz Core 2 machine running iTunes 10.7 to an older iMac running OSx 10.5.8. How best to do this and keep all my data, tags and covers in tact?

    Firstly, time to get rid of the 2 x 512MB FBDIMMs in there, they add more heat and use more watts then they add to the system. If you need more, and 4 or 8 DIMMs is ideal, Amazon has 2x2GB sets $22 - about 1/50th what I paid for 1GB new.
    Buy a 250GB Samsung EVO SSD $129
    Pick up Carbon Copy Cloner http://www.bombich.com to clone the system to the SSD
    A sled adapter for the SSD from Icy Dock $14 Amazon.com
    7-8 years overdue for new system drive! amazed it lasted this long. An SSD plus some WD Black 2TB drives or larger should do the trick.
    you can also put the SSD in the lower optical drive bay and use one of the two ODD "spare" SATA ports for the SSD - an SSD is the best way to improve the performance of our old Mac Pro 2006-7 models.
    When you downloaded the Lion installer that was when to create a flash type installer with Lion DiskMaker.
    If you have put in a new-ish graphic card then OS X 10.6.0 may not support it.

  • I have an iMac running OSX 10.6.8 and updated to the latest  flash player but the audio on youtube music still won't respond.  Any suggestions besides buying a new computer?

    I have an eight year old iMac running OSX 10.6.8 and just installed the latest Flash Player but the audio won't play on the youtube music website.  What else do I need to update or install to listen to the music?

    just installed the latest Flash Player
    Did you uninstall all the previous versions of Adobe Flash Player?  Did you repair permissions and restarted your computer after the installation?
    Which browser & version are you using?  Have you tried other browsers? 
    Please advise.

  • Have iMac running OSX 10.5.8, where can I find the upgrade?

    have iMac running OSX 10.5.8, where can I find the upgrade?

    Why would that be irritating?? I suspect you are after Mavericks, in order to get Mavericks you have to have the Mac App Store app which did not become available until Snow Loepard 10.6.6. Once you have purchased and installed SL then install the 10.6.8 combo update, run Software Update again and install all suggested updates and finally you can get Mavericks.

  • Inadvertantly deleted Firefox for an iMac running OSX 10.5.8. Can I get an older version?

    Recieved an email to upgrade Firefox to latest version. This I did and then when it went into the Applications folder on my iMac running OSX 10.5.8 (which can't be updated) it "replaced" the older version. Now I haven't got any Firefox at all. Can I download an older version?

    Another solution (especially if this is a PowerPC iMac) is TenFour Fox.
    http://www.floodgap.com/software/tenfourfox/
    Sorry I couldn't figure out how to create a link. While this isn't an officially supported Mozilla product it seems to be very stable & keeps up with the updates to the official Firefox fairly well as they come out.

  • Replaced hard drive on my iMac running OSX 10.9.3 now CS4 Master Collection Not working. Receiving error message 150:30 - help.

    I have had to replace the hard drive on my iMac running OSX 10.9.3 and reloaded my CS4 Master Collection from Time Machine. I am receiving error message 150:30 saying License has stopped working what should I do?

    Unfortunately, you can't install Adobe applications by copying them from a backup, or using the Migration Assistant on a Mac. There are too many support files scattered throughout your drive which aren't moved to the correct location.
    First, you'll have to use Adobe's Cleaner Tool to remove all of the stuff you copied:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Then reinstall CS4 Master Collection from your original discs, or a backup of the downloaded files. If you don't have either, you can download Creative Suite from this link:
    Other downloads

  • Why to I have a blue haze on the photos and on the menu bars of apps?  I have Intel iMac running OSX 10.7.5

    Why to I have a blue haze on the photos and on the menu bars of apps.  I have Intel iMac running OSX 10.7.5.  This problem just started.  All my photos are corurpted with a blue haze.

    Here is another photo with the wierd blue circle in the sky taken with a DSLR.  This did not appear until recently and now I see it on all photos and also when I print the photo.

  • Can I get iPhone 3GS backup off of an iMac running OSX 10.5 to restore the data on a new iPhone 5?

    I bought a new iPhone 5 for my wife because her old 3GS was at its end.  I made sure to back up the old phone on her old iMac running OSX 10.5.  Got the new phone home plugged it in to the computer and failure ensued... Can't sync because the iTunes is too old, can't upgrade iTunes because the computer is too old... I have a backup on the computer is there any way to move it to my newer iMac running 10.8 to get some of her data back?  I tried to think ahead by backing up but failed to think about incompatibility issues... Any help would shorten my time in the doghouse,

    You can certainly move the backup files but that will do nothing for the apps or media that is on the device.  Backups do not contain apps or media.
    Where iTunes backups are stored on your computer
    The folder where your backup data are stored varies depending on the computer's operating system.   Make sure the backup folder is included in your periodic data-backup routine.
    iTunes places the backup files in the following places:
    Mac:  ~/Library/Application Support/MobileSync/Backup/
    For the apps and media it will be necessary to move the ENTIRE iTunes folder from the old computer to the new computer.  Creating a new user account on the new computer would be a good idea if you both use iTunes and want to keep your media seperate.

  • How can i upgrade from iphoto 7.1.5 to 8.1.2 on an older iMac running OSX 10.6.8 ?

    How can I upgrade from iphoto 7.1.5 to 8.1.2 on an older iMac running OSX 10.6.8 ?

    With the above listed config that I have (iphoto 7.1.5 on an older iMac running OSX 10.6.8), how can I move my iPhoto library from this old iMac (2006) to my NEW iMac (2011) that is running iPhoto 9.5.1 ?
    To open an iPhoto 7.1.x version in iPhoto '11 you need to run the iPhoto Library Upgrader. See this Support document:
    iPhoto '11: About the Library Upgrade
    Download and install the upgrader,  then run it on your iPhoto 7.1.5 library. After that, iPhoto will be able to open your library and upgrade it to version 9.5.1. And you will be able to merge the libraries with if Library Manager.

  • How can i get my Imac, running OSX 10.6.8 with a 2Ghz Intel Core 2 Duo, how can i get Final Cut Pro 4 and DVD studio pro 2 to run on it?

    I just bought an IMAC running OSX 10.6.8 (not sure what flavor that is). The processor is 2Ghz Intel Core 2 Duo (Late 2006). When i run Final Cut Pro 4 on it I get the following error.
                        "Configuration error
                           This software requires certain hardware or software which is missing
                                    * AGP graphics Card"
    If Final Cut Pro 4 doesn't run on my system, what version of Final Cut can I run on this as I am a filmmaker and really am comfortable with Final Cut Pro.
    On the same note I also have DVD studio Pro 2 and that just quits without any message.
    Hope any of you can be some help.
    Thank you,
    Doug

    This is my first mac in a long time so i'm not sure about what this mac is as i didn't buy this from apple (ala Amazon). I'm a tad confused about the Intel/PowerPC thing. I do know the software version for sure, but the Intel/PowerPC is very confusing. I just need to find someone who would know about this question. It doesn't say G5 on this computer. Thats my biggest confusion. Help Me...

  • I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

    I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help

    It would depend on how old your IMac is, how mush memory you have, it it can be upgraded by OWC, etc. I have a 2006 Macbook Pro and would NOT put Mavericks on it or espeacially FCP 10.1.1 on it because the most memory it can have is 4 GB. You need at least 8 GB to work with Final Cut Pro 10.1.1. IMHO.
      I would try to find a copy of Final Cut Express perhaps.
      Does this answer your question?

  • We could not complete your iTunes Store Request. An unknown error occurred (4002). What can I do to fix this? (I'm using iTunes 11.4(18) on my iMac running OSX 10.6.8 )

    I keep getting  this message in iTunes We could not complete your iTunes Store Request. An unknown error occurred (4002). What can I do to fix this? (I'm using iTunes 11.4(18) on my iMac running OSX 10.6.8 )

    iTunes Error 4002 - http://wiki.answers.com/Q/How_do_you_solve_the_iTunes_error_4002 - toggle Genius

  • Can an intel iMac run OSX Tiger from an external hard drive?

    Hi can anyone please tell me if it is possible to run OSX Tiger from an external hard drive on an Intel iMac running OSX 10.5 Leopard or later?
    Or is it possible to partition the intel iMac's hard drive and add Tiger?
    At the moment I am running Tiger on a partitioned hard drive shared with OSX Leopard and wish to upgrade to an intel Mac. I need tiger to run some software not compatible with newer Macs and also to access OS9 Classic. Thanx for your help.

    IF you upgraded from Panther as you know you do not have an Intel based iMac. I beleive the limit of your upgrades on your current machine is going to be Leopard. The system requirements for Snow Leopard are:
    General requirements
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Some features require a compatible Internet service provider; fees may apply
    This is straight from Apple so yes if you want to go beyond Leopard then you must purchase a new machine. My suggestion would be to begin replacing your legacy apps, you are extremely far behind and the longer you wait the more painful it will be to get current.
    Good luck.

  • Have older iMac running OSX 10.6.8 what OSX upgrade should I go to?

    Have older iMac running OSX 10.6.8, need to upgrade OS, what version should I upgrade to?

    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Yosemite
    You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
    Upgrading to Yosemite
    To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks/Yosemite - System Requirements
          Macs that can be upgraded to OS X Yosemite
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
    You do not have to upgrade to Lion in order to upgrade to Yosemite if your Mac can run Yosemite.

Maybe you are looking for

  • There was a problem downloading the software for the iPod "iTouch". an unknown error occurred (9006)

    cannot update ios - tried using iTunes in Windows and also MAC OS.  Cannot sucessfully download the ios6 update.  Is anyone else having this issue?  I am trying to update an iTouch purchased earlier this year.  I am using an iMac OS X 10.7.4 and a DE

  • CcBPM Loop Condition Editor

    Hi I am trying to control the number of iterations of a Loop witihn a ccBPM Integration Process. I have a Container name: index type: xsd:integer , which is initialised to 0 before the loop is entered. I also have Container name: InterfaceCount which

  • Bash-completion works only with X

    Hi, For a long time bash-completion has not been working for me in VC. This didn't change with numerous upgrades, so I think this must be due to some my local setting. In VC it doesn't work for any user and in X it works for all users, so it is most

  • Attaching a document

    hello, i have searched few threads before i am posting this question, the questions still remains is how do i attach a doc to the sales order, i got the answer like going to SU01 and activate parameter, my question is there any other way? , anyway it

  • How can I display favorites products list as table?

    When I insert favorites list module on a page, {module_favorites,i,27,0} it renders them as <li> (one per row).  I want them to render as the product list. (Several products per row). {tag_productlist,3,,6,alphabetical,true,false} How can I do this?