All browsers slow after startup

After startup, my PC functions quickly and well for everything except for my browser. No matter if I use Google or Firefox or IE, they all take approx. 20 to load before I can access web content.

Leavperson, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

Browsers slow after crash

Have a relatively new PowerMac 2 x 2.4 GHz Quad-Core Intel Xeon running 10.6.8
Everything was very speedy up until a few days ago when a power outage hit for several hours and where my UPS ran out of battery juice and the computer shut down improperly.
Since then, certain websites I use all the time (Aweber, Ning, 1ShoppingCart, etc) are VERY VERY SLOW to the point of not being usable, both in Safari (latest version) and Firefox (latest version)
I have repaired permissions (several times), ran AppleJack (several times), ran DiskWarrior (latest versions), no effect. Every time I repair permissions, the same errors appear no matter how many times I do it - not sure if that is normal or something fundamentally wrong with my system now?
I've tried: adding OpenDNS dns server addresses, turning off IPv6 in Network System Prefs, re-installing browsers, deleting Pref plist files, etc. Nothing fixes it.
I then tried installing latest Google Chrome browser (never had installed it before) - that has sped up SOME things, but I'm still seeing slow response on SOME of the above critical sites (i.e. Aweber, 1ShoppingCart)
Any idea what happened to my system and how to fix it? Very frustrated.

Not the hardware. Not the sites. Everything else on the computer is plenty zippy and most websites are zippy, and the ones really slow in Safari & Firefox are fast in Chrome, except for a few critical ones that are fast on other computers, so it has to be something with the network connection and/or browsers handling certain types of requests. For example, the 'Search' in 1ShoppingCart is very slow in Chrome and not usable at all in Safari/Firefox. But navigating between pages on 1ShoppingCart is fast in all browsers.
Creating a new broadcast email in Aweber is unusable in Safari/Firefox, but fast in Chrome. So, only certain types of functions are not working properly on certain sites. I suspect some kind of Java or Javascript library is corrupt - that's all I can think of but have no idea how to troubleshoot it.

MBP slow after startup after Time Machine restore process.

Hello all,
I have a 2.4 ghz MBP and was dual booting Ubuntu hardy and Leopard using the rEFit boot manager. I got tired of Ubuntu and decided to go back to a single OS. I reinstalled OS X erasing all data on the HDD, and then restored from a Time Machine back-up. Since then, start-up is very slow. I get a bright white/grey screen that last about 6-10 seconds before the apple logo appears and the chime sounds. I thought it might be a bad TIme Machine back-up so i tried a different one. I had no luck with this method, or repairing disk permissions etc. in Disk Utility.
What is causing this change in start-up time?
Can i fix it?
Any help is much appreciated THANKS!!

I know it may sound goofy, but worth a try...
Many times after erasing my Windows / Bootcamp partition I experienced extremely slow startups. What I found to fix that was to open System Preferences -> Startup Disk and make sure your Mac OS X is selected for the default to startup your system. Anytime I experienced this problem, Mac OS X was not selected.
Hope it works for this also.

My MacBook slow after startup then is fast later

i have an interesting problem. when i restart my macbook or turn it off and then back on, it is kind of slow at first. it doesn't open native applications or anything fast but after like 10 minutes of opening applications its back to being super fast. what could be the issue? i have installed smalldog 2gig memory in it.

This could be caused by that fact that even though the OS has loaded, programs are still being loaded in the background.
Also, once you open up an application it can become cached and opening for the second time will be faster.
All in all I would say this is normal behaviour. If you don't like it you should look at what Applications you have running when you start up your computer and then get rid of them - for example Norton AV can slow stuff down like this: mine is disabled unless I think there is a threat.

All settings lost after startup

hello,
unfortunatly my pb keeps losing all settings(mailaccounts, bookmarks, dock etc.). after i set everthing as it was before it disappeared again.
anyone knows what to do?
thanks

I sounds like you may be setting up prefs/settings for one account and logging on another account, but not quite. Any chance you lost, deleted, or misplaced your Home folder?
Read the Apple kbase Article:
http://docs.info.apple.com/article.html?artnum=302150
Do you have file vault turned on?
Joe

Satellite P200 - all Browsers Crashes after 5 to 20 mins

I am now losing the will to live with this laptop.
Satellite P200-13z with Vista 32bit
The issue is this... no matter what browser I use it will freeze and hang. Opera, IE and Firefox. Sometimes it will be good and work for 20 mins, sometimes it will crash in 5 mins.
I have updated my drivers, done clean re-installs of the OS, tested my RAM, shut down all but MS services, increased virtual memory, prayed to various germanic gods.
I have Avast and Zone Alarm running alone from Non MS services. I may shut them down and see what happens but not sure it will be the cause.
I am of the opinion it may be memory related and the way it is handled, possible aligned with Adobe Flash (spit). Maybe a Vista issue.
Uninstalling that curse (Flash) does not seem to fix the issue either.
Can anyone point me in the right direction? 18 months I have been trying to fix this... and now I need the laptop fulltime it needs to be fixed.
It isn't an isolated problem either, google search 'all browser crash vista' to see what is happening out there, and a comple lack of knowledge or solution for this issue.
Many thanks in advance for some support.

Thanks Andrej
By crash, the browser locks up and freezes. I can close firefox for example, but am unable to restart it or kill the process.
I have seen it happen on Mozilla Filezilla and browsers only.
I should have done it while under warranty, but unable to do that now. I just assumed it was a flash issue and would have been fixed under a future update. Also due to the number of people getting the same issue problem, assumed it wasn't the laptop.
Would you know what kinda reports I would need to post so folk can see what is happening under the hood so to speak?

All browsers slowing

I am running Mountain Lion on a 2009 Mac Pro. Over the last two weeks Safari has started to behave very strangely. Sites stall loading and have to be refreshed, or load with corrupted formats and have to be refreshed, or time out, or load with no images. I have tried Chrome and Firefox to see if it is a Safari issue but they exhibit the same behaviours. I tried resetting Safari anyway but it amde no difference. It doesn't seem to be related to my broadband speed, which is still fine.
If I was back on Windows I would suspect some sort of virus.
Any thoughts?
Thanks

Please read this whole message and be sure you understand all of it before doing anything. Back up all data before making changes to your settings.
Write down the server addresses.
Click Cancel to close the Advanced sheet. Unlock the preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Open the DNS tab again and change the server addresses to the following:
8.8.8.8
8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. Any difference?
Notes:
1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself.
2. I’m not advocating Google or anything else as a DNS provider; the server addresses are offerred merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

All browsers hang after opening a few pages

Hi,
I'm using a MacBook pro with OS 10.6.8 with 4 GB of ram and a 319 GB hard drive showing 71 GB still available. On both safari and Firefox, after I open a couple of pages in either browser, pages stop loading. They get hung up and never load. If I restart, I can visit a few pages again and then it hangs up again. After searching for solutions, I have emptied my cache and added two open source DNSs. Neither helped. Also downloaded sophos home for Mac and scanned for malware and it found none. Any suggestions?
Thanks for your help.

Thanks for continuing to help. Here's what's running when I have Safari open. It's 19 processes. If I close Safari, it's less:
131
Safari Web Content
NisiTomi
0.2
9
124.7 MB
Intel (64 bit)
129
Safari
NisiTomi
3.2
11
50.2 MB
Intel (64 bit)
147
Activity Monitor
NisiTomi
2.2
5
17.9 MB
Intel (64 bit)
93
Dock
NisiTomi
0.0
5
15.4 MB
Intel (64 bit)
95
Finder
NisiTomi
0.0
4
14.1 MB
Intel (64 bit)
94
SystemUIServer
NisiTomi
0.0
5
12.5 MB
Intel (64 bit)
141
mdworker
NisiTomi
0.0
3
10.8 MB
Intel (64 bit)
27
loginwindow
NisiTomi
0.0
2
7.9 MB
Intel (64 bit)
120
SophosUIServer
NisiTomi
0.0
4
6.5 MB
Intel
107
UserEventAgent
NisiTomi
0.0
3
6.1 MB
Intel (64 bit)
139
cvmsComp_x86_64
NisiTomi
0.0
1
6.1 MB
Intel (64 bit)
114
AirPort Base Station Agent
NisiTomi
0.0
3
5.8 MB
Intel (64 bit)
103
Quick Look Helper
NisiTomi
0.0
6
5.7 MB
Intel (64 bit)
98
fontd
NisiTomi
0.0
3
4.6 MB
Intel (64 bit)
115
imagent
NisiTomi
0.0
2
2.7 MB
Intel (64 bit)
142
AppleSpell.service
NisiTomi
0.0
2
2.5 MB
Intel (64 bit)
118
CCacheServer
NisiTomi
0.0
2
1.7 MB
Intel (64 bit)
89
launchd
NisiTomi
0.0
2
1,004 KB
Intel (64 bit)
97
pboard
NisiTomi
0.0
1
856 KB
Intel (64 bit)

The video downloading is extremely slow after downloading Flash Player Active X (IE) and FP Plug-in

I have Windows 7 on a 64-bit operating system, and have Firefox 19 and Internet Explorer 8. I tried installing Flash Player 11.6.602.171 from the Adobe Website and got an error message right at 47% download "can not contact reliable source." I also tried uninstalling whatever Flash Player I had, but I continued to get the same error message at 47% "can not contact reliable source." Finally, following the advice found in the link below under "Program Bar Hangs During Download," I downloaded Flash Player ActiveX (internet explorer) and Flash Player Plug-In (all other browsers). It appeared that both downloads were successful and I verified that the installation was complete in the link below under "Verify that installation is complete." It says I have Flash Player 11.6.602.171. My issue now is that whenever I watch videos that use Flash Player, the downloading of videos is extremely slow. For example, a 45 second youtube video might take 30 minutes to watch. I have tried everything (from General Info, Download Issues, Installation Issues, Post-Installation Issues) in this Adobe installation problem page http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html but the problem has not improved. Can someone please help me? It would be greatly appreciated. Thanks!

First, I went on this link under Progress Bar Hangs During Download
http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header
and then I downloaded Flash Player directly by clicking the links provided Flash Player for ActiveX (IE) and then Flash Player Plug-In (All browsers). After my installations were complete, I tried watching any youtube videos or videos on www.ABC.com and the loading of videos was extremely slow.

Database slow on startup

Hi,
I am a new administrator and am facing an issue with my Oracle 8.1.6 database.I have encountered a problem where somedays my Oracle becomes extemely slow after startup.Almost it goes into a hung kind of state wheneever any reports etc are accessed from the application.After waiting for abt half an hour or so everything goes back to normal.
Has anyone faced a similar kind of problem .Has it got something to do with the recovery process taking place during startup.Can you please help me find a solution to this.
Regards,
Dinesh

in order to be sure you may watch the operating system cpu, disk, memory and network load and catch the top consuming proceses - you can use sar iostat vmstat and netstat for unix -
After match them from v$ views to find out the sql query, what they are waiting etc. - you can use this query to identify what is going on behind -
-- who is doing what
SELECT sq.sql_text,
se.status,
se.username,
se.osuser,
se.terminal,
se.machine,
'ALTER SYSTEM KILL SESSION ''' || se.sid || ', ' || se.serial# ||
''' IMMEDIATE ;',
se.sid,
se.serial#,
pr.spid,
se.saddr,
se.schemaname,
se.program,
se.logon_time,
sq.hash_value,
sq.address,
sq.buffer_gets,
sq.disk_reads,
sq.executions,
sq.fetches,
sq.rows_processed,
io.block_gets,
io.consistent_gets,
io.physical_reads,
io.block_changes,
io.consistent_changes,
se.module,
se.action,
se.client_info,
sw.event,
sw.p1text,
sw.p1,
sw.p2text,
sw.p2,
pr.pga_used_mem,
pr.pga_alloc_mem,
pr.pga_freeable_mem,
pr.pga_max_mem,
'exec dbms_support.start_trace_in_session(' || se.sid || ', ' || se.serial# || ', ' ||
'waits => TRUE' || ', ' || 'binds => TRUE);',
'exec dbms_support.stop_trace_in_session(' || se.sid || ', ' || se.serial# || ');'
FROM v$session se, v$sqlarea sq, v$process pr, v$session_wait sw, v$sess_io io
WHERE status IN ('ACTIVE', 'KILLED', ' INACTIVE', ' CACHED', ' SNIPED')
AND se.sql_hash_value = sq.hash_value(+)
AND se.sql_address = sq.address(+)
AND se.paddr = pr.addr
AND se.sid = sw.sid
AND se.sid = io.sid
ORDER BY sq.sql_text, se.username, se.schemaname, se.osuser, se.program, se.sid
You need to match the top consumer os processes' id with the "pr.spid" column, then you might look at the other columns of that row for details.
Also the database runs a number of jobs - backups, etc. these may be the problems.

Slow webpage loading on all browsers

Hi,
I have the problem that webpages tend to load extremely slow on all browsers under the latest Mountain Lion on a Macbook Pro Retina Mid 2012. I say tend, because sometimes pages load instantly, but very often it takes minutes to open or a page loads only partially. So there is some random element of surprise mixed in. The problem exists on all browsers I have on my system. It does not on my Windows laptop. I have tried anything I could find on the web that is even remotely related to this issue. I will just list, what I have tried so far:
1) I have deleted my wireless connection under network preferences and setup a new one.
2) I have tested other DNS servers, Google's amongst then (8.8.8.8).
3) I have deactivated DNS prefetching on Safari.
4) I have tested Chrome and Internet Explorer (via VMware Fusion).
5) I have done several speed tests with two ISPs.
6) I have tested the disk permission verification and repair tip.
7) I have tested a different wireless router as well as different wireless standards (g vs n).
8) I ran a traceroute which turned out fine.
9) I have tested several FTP severs. The problem seems to be isolated to HTTP browsing.
Can't think of anything else I have tested, but that should cover most of it. I do not want to setup a new system and postpone the issue. I want to find the cause of this.
Maybe anyone can help we resolve this issue.
Loehnsberg

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Web browsers working very slow after clearing the cache

Hello, I'm hoping for some help with making my web browsers run normally again. I watched this video https://www.youtube.com/watch?v=1O9NNK74KIQ and followed some of the advice to create more space in my startup disk, mainly removing all website date from safari. After that though I noticed that my web browsers (Safari, Firefox) began running very slowly. Any suggestions?

Is it running extremely slow? Like unbearably slow? Or just noticeably slow? If you cleared your cookies and cache files I would expect the web browsers to feel a bit slower than normal. Part of the reason your computer saves those particular files is to help the web browser load webpages that you've visited in the past quicker. Kinda like remembering a persons name, versus having to introduce yourself every single time you meet each other. (bad analogy, but it makes my point). Without those files, your computer will begin recreating all those files and "reintroducing" itself to each website.
Now if your web browsers feel slow after a day or two, then perhaps something else is going on.

Webpages stop loading after some time across all browsers

I have come across a problem that 2 of the users that I support have been experiencing recently and I am trying to figure out where to begin. They will be able to use the internet, access webpages and everything for some time till at one point seemingly randomly all web browser connectivity becomes stuck at the dialog Connecting and eventually times out trying to connect to the host server. Yet other forms of internet access, like ping and telnet, work just fine at this point. Basically it seems that all traffic going to ports 80 and 8080 times out and I have pulled the logs where I believe this happened and pasted them here:
http://pastebin.com/VPSPwyBe
A temporary fix for this so far is a quick reboot and everything behaves normally for sometime till web access drops and another reboot is required. This is true across all browsers, IE, Firefox, and Chrome on a MacBook Pro Retina 15" running OSX 10.9.4. I have tried fresh installs of all the browsers and switching to a different OS X user account and still have the same problem. I have also tried to flush the DNS using the terminal and that has had no effect. There are no proxies involved and resetting the wireless adapter produces no results. Going to keep searching for some other steps to try to fix this and will keep this thread updated.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

My MacBook Pro (Retina, Mid 2012) is too slow after installing Yosemite version 10.10.1. All programs take for ever to load especially Safari and even chrome. I regret upgrading to yosemite, it was all fine with Maverick. Any suggestions ? ThankYou

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

All internet activity is VERY slow after updates.

Hi. I'm on a flat-panel iMac running 10.3.9. I've got 1GB ram and 17GB left on an 80GB HD. I've got Qwest DSL with an Actiontec modem. I'm going straight from the wall to the Mac. No wireless or network.
My browsers are running incredibly slow after I added a few recent updates to iSync, iTunes, Security Update, iPod and maybe one or two others. It's the same on Safari, Explorer and Firefox.
I checked my connection speeds on several different sites. I'm getting good times on those (4.5 down and 720 up.) Downloading files is no problem. It's just getting to the actual pages that is a pain in the butt. It's weird.
I called Qwest. All the lines looked great, which doesn't surprise me since the connecion speeds were good.
I've emptied the cache on Safari. I've repaired permissions several times. I've restarted everything. Unplugged, then re-plugged every connection.
Everything was cruising along fine until I installed those updates. I'm not saying they're definitely the culprits, but I do wonder if other people have had this problem.
The machine is basically acting like it has spyware, but I know none really exists for Mac.
Any other ideas about what I could try to do?

Not sure if this will help but it fixed a lot of issues on my families iphones. Settings, General, Reset, Reset Network Settings. It will wipe any wifi details so you need to have those to hand to set them uback p again.
This fixed various problems with no sound when dialling, no ringer etc. May be a providor issue rather than iphone issue though but it is a good tip to refresh all your settings, without affecting anything else on your devices.
Keep it fresh

All browsers slow after startup

Similar Messages

Maybe you are looking for