All CAPTURE AND PRINT files saved on my mac are blank -what is the problem

I installed the Capture & print Add-on on my Macbook Air and captured areas of several web pages and saved them to a folder on my desktop. All the add-on files are blank with zero data captured.
What must I do to remedy this.
Many thanks for assistance.
Ant Johnson

How did you save them? Did you paste the captures into an image editor and save the image?
Support for that extension can be found here: http://forums.mozillazine.org/viewtopic.php?f=48&t=2318993

Similar Messages

My iPhone 3gs is not recognized by my PC or iTunes and i can't open it. Any idea what's the problem?

My iPhone 3gs is not recognized by my PC or iTunes and i can't open it. Any idea what's the problem?

I had the same problem with my phone, its a 3gs, out of no where my laptop stop recognizing it and wouldnt charge either, i got worried because i had all my pix and videos on my phone and didn't have a copy, so i started searching on the internet for an answer to my issue, bought extra usb cables, used different laptops and nothing worked .. Untill i took my cell phone apart and thought about replacing the (charge port assembly for apple Iphone 3gs) so ordered the part online and 3 days later got it and i just replaced it right now... and guess what/??? IT WORKED!!! YEAP.. NOW MY CELL IS CHARGING AND I JUST SYNC MY STUFF.. I HOPE THIS CAN SOLVE YOUR PROBLEM... AND ONLY COST ME 8 DLLS

Often my iphone4 just got off and it doesn't start for 2/3 day what is the problem and how can i fix it?often my iphone4 just got off and it doesn't start for 2/3 day what is the problem and how can i fix it?

often my iphone4 just got off and it doesn't start for 2/3 day what is the problem and how can i fix it?

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

I have Firefox 5 and Reminderfox. But Reminderfox doesn't show. What's the problem?

I have Firefox 5 and Reminderfox. But Reminderfox doesn't show. What's the problem?

Please click the '''Solved It''' button next to the answer that answered or solved your Firefox support issue, '''''it appears when you are logged in''''', so this thread gets marked as '''Solved''' to help other users who may have this same problem.

I can't access to my ipad In MacBook Air. Error shows this device no loger connected or error shows that no response from divice and iTunes can't connected or not found divice, what's the problem? I reset my ipad but no response

I can't access to my ipad In MacBook Air. Error shows this device no loger connected or error shows that no response from divice and iTunes can't connected or not found divice, what's the problem? I reset my ipad but no response

Hi ..
Which OS X is installed on your Mac ?
Click the Apple () menu top left in your screen. From the drop down menu click About This Mac. The version is noted there.
Make sure your Mac OS X software is up to date.
Disconnect the iPad from your Mac.
Open System Preferences > Software Update > Check Now
If any updates are required, make sure to restart your Mac after the updates are installed then connect your iPad and see if iTunes recognizes it under Devices.

Automator application: Rtf's converted from pdf's do not open and word files from same rtf's are blank--???

I found directions for converting pdf's to word documents to facilitate editting. The process used Automator by selecting
pdf's to be converted to rtf's. The resulting rtf file could then be saved as a word document. The problem is that the resulting
rtf's do not open and the saved word document opens blank. What's the problem and the solution?

mns579 is correct, but it is even more complex than that. To put it bluntly, the only thing a PDF is guaranteed to do is print. There is no guarantee that any PDF will convert into any format other than an image (for printing). Some PDFs are composed of actual text or vector data and those are nice to work with, but not commonly encountered. In fact, pretty much the only time you are likely to have a PDF in a format that can be easily converted is when you have the document in some other original format from which you made the PDF. And, if you have said original format, why do you need PDF?

When I print from the web, the print is blue ink, which I don't want and can't read. When I print from Word, it is black ink. What is the problem?

If I print an article downloaded from the web, it prints in blue ink, which is almost not readable. If I download it to Word or print a document stand alone in Word, it prints in black ink, which is what I want. I didn't have this problem before I upgraded to the new Firefox. Please help.
Thanks
Lee Gregg

I should also point out that when I connect my iPhone, it DOESN'T appear as a connected drive on the desktop. Not sure how this can be so, since the iPhone also has a drive and also functions as an iPod if I want it to. I must have changed some setting to achieve this non-appearance, but don't remember what I must have done.
What's the secret?

My MBP won't drag and drop unless I put it to sleep. What's the problem?

I have a 17" MBP running Mountain Lion and I cannot drag and drop unless I first put it to sleep. Any idea what I can do to fix that? Is there a patch... or maybe a corrupted file? I recently had it serviced and they reinstalled Mountain Lion, but the problem still exists.
Any help appreciated.
Robert Stull
Bluetrane60

Please read this whole message before doing anything.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Remove Child and Event.SOUND_COMPLETE not working inside movie clip. What's the problem?

I have a movie clip that is called to the stage. The user then clicks a button and music plays. As the music starts, another movie clip is called, a simulation of an equilizer. There are several things that should happen:
1) When the user closes the movie clip the music is supposed to stop playing and the equilizer movie clip is removed. What actually happens is the music stops playing but the equilzer movie clip is not removed.
2) When the music is finished playing the equilzer is supposed to be removed from the stage and the play button is reactivated. But none of that happens. When I click on the movie clip a second time equilizer is still there and the play button is not reactivated.
Here's the code that calls the movie clip to the stage.
stage.addEventListener(MouseEvent.MOUSE_DOWN, goButtons);
function goButtons(event:MouseEvent):void
    if (event.target == Song_bnt)
        SoundMixer.stopAll();
        addChild(myPlaySong);
        myPlaySong.x = 304;
        myPlaySong.y = 105;
        //event.stopImmediatePropagation();
Here's the code in the movie clip:
import flash.media.Sound;
import flash.events.Event;
stop();
var playRayJaySong:RJSong;
var playRayJaySongChannel:SoundChannel;
var equilizer:Equilizer;
equilizer = new Equilizer();
playRayJaySong = new RJSong();
//Plays music, inactivates buttons, and adds the equilizer to the stage.
PlaySongRJClip.addEventListener(MouseEvent.MOUSE_DOWN, songPageButton);
function songPageButton(event:Event):void
    playRayJaySongChannel = playRayJaySong.play();
    PlaySongRJClip.visible = false;
    ClicktoPlaySong.visible = false;
    addChild(equilizer);
    equilizer.x = 269;
    equilizer.y = 246;
//Removes the equilizer from the stage when the music is complete.
PlaySongRJClip.addEventListener(Event.SOUND_COMPLETE, rjSoundComplete);
    function rjSoundComplete(e:Event):void
    PlaySongRJClip.visible = true;
    ClicktoPlaySong.visible = true;
    removeChild(equilizer);
//Removes the equilizer and event listeners from stage and calls dispatch event to close the movie clip.
closeSong_bnt.addEventListener(MouseEvent.MOUSE_DOWN, CloseSong);
function CloseSong(event:MouseEvent):void
    removeChild(equilizer);
    dispatchEvent(new Event("RemoveMSong"));
    PlaySongRJClip.removeEventListener(MouseEvent.MOUSE_DOWN, songPageButton);
    PlaySongRJClip.removeEventListener(Event.SOUND_COMPLETE, rjSoundComplete);
//Removes the MovieClip from the stage when the user clicks on the close button inside the MovieClip.
myPlaySong.addEventListener("RemoveMSong", RemoveSongClip);
function RemoveSongClip(e:Event):void
    SoundMixer.stopAll();
    removeChild(myPlaySong);
Any thoughts?

I figured out the problem. Here's how I reorganized the code (all in one frame).
//Code for Ray Jay song.
var playRayJaySong:RJSong;
var playRayJaySongChannel:SoundChannel;
playRayJaySong = new RJSong();
myPlaySong.equilizer_inst.visible = false;
//Plays the song.
myPlaySong.PlaySongRJClip.addEventListener(MouseEvent.MOUSE_DOWN, songPageButton);
function songPageButton(event:Event):void
    playRayJaySongChannel = playRayJaySong.play();
    playRayJaySongChannel.addEventListener(Event.SOUND_COMPLETE, rjSoundComplete);
    myPlaySong.equilizer_inst.visible = true;
    myPlaySong.PlaySongRJClip.visible = false;
    myPlaySong.ClicktoPlaySong.visible = false;
//Removes the MovieClip from the stage when the user clicks on the close button inside the MovieClip.
myPlaySong.closeSong_bnt.addEventListener(MouseEvent.CLICK,RemoveSongClip);
function RemoveSongClip(e:Event):void
    SoundMixer.stopAll();
    removeChild(myPlaySong);
    myPlaySong.equilizer_inst.visible = false;
    myPlaySong.PlaySongRJClip.visible = true;
    myPlaySong.ClicktoPlaySong.visible = true;
    playRayJaySongChannel.removeEventListener(Event.SOUND_COMPLETE, rjSoundComplete);
//Resets all of the movieclips to their orginal state.
function rjSoundComplete(e:Event):void
    myPlaySong.equilizer_inst.visible = false;
    myPlaySong.PlaySongRJClip.visible = true;
    myPlaySong.ClicktoPlaySong.visible = true;
Thanks all for your suggests and input.

When I first downloaded firefox I was able to blog on blogger. Now I can't see pictures on my blog and I can't create a new post. What is the problem?

I downloaded firefox last week and everything was fine. I was able to use blogger and add new post to my blog. Now my blog does not show the title picture and some of the post pictures will not show up either.
The page to create a new post looks funny and different from when I first downloaded firefox. The toolbox to edit the text/font is not there. The spellcheck is also missing. I can't add pictures or video because that is missing too.
I can use IE to blog, but I liked firefox better until these problems started.

No, you need to (re)install the current Firefox version.
You can find the latest Firefox release in all languages and for all Operating Systems here:
*Firefox 13.0.x: http://www.mozilla.org/en-US/firefox/all.html
If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images, the permissions.default.images pref should be 1.
*http://kb.mozillazine.org/Images_or_animations_do_not_load
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

I had a problem for over a year and now it's fixed. Does anyone know what caused the problem and what fixed it?

Here's the original problem
http://support.mozilla.org/en-US/questions/890221?esab=a&s=&r=2&as=s
It seems to have finally been fixed in firefox 22 (or 21). I'd love to know what the original cause of the problem was and whether it was fixed by firefox or OS X

I dont think any bugs were filed like this, likely something Apple fixed.

My I cloud drive is still upgrading after 3 weeks and I can't view anything on I cloud what's the problem

MMy I phone5s is still trying to upgrade the I cloud drive after 3 weeks there is no mass storage or anything to complicate things and I'm unable to view any photos why or what is wrong

Good day Sonia,
If you are having an issue with your iPhone not being able to set up iCloud Drive, I would suggest that you troubleshoot using the steps in this article -
Get help using iCloud Drive - Apple Support
In particular the sections titled What if my upgrade to iCloud Drive pauses or doesn't respond? and What if my files aren’t updating to iCloud?
Thanks for using Apple Support Communities.
Safe computing,
Brett L

HT5070 i just downloaded/purchased game of thrones s1 #1 and can't see a thing on itunes. what's the problem? I hit Play now, and screen goes black as if ready to play and nothing.

i just downloaded/purchased "game of thrones? s1 #1 and when i hit "play" nothing happens. the screen goes blank, the counter is there, but nothing starts. help please!

Go to the Music section of your Library (very top-left corner) and see if your songs are there. The "Purchased" playlist may have been deleted or gotten corrupted, but if that happens it's not a big deal because your music should still be in your main Music Library.
If your music is NOT in the Music section of your Library, then go to the iTunes Store homepage and find the Quick Links list on the right side. At the top of that list, click Purchased and you can redownload all of your previous content that you might have lost.

I have iPad2 and original iPad. After upgrade to iOS5 neither will connect to wifi network. Network is working as I have connectivity with iPhone and Mac Airbook. What's the problem?

I have downloaded iOS 5 to both iPad 2 and original iPad. I cannot get wifi to work on either. It's not my wifi as I have connectivity with other devices, just not with the iPad. Any ideas?

I'm having the same problem. The iPad has never roamed particularly well between access points, but under IOS6 it doesn't seem to roam at all, it simply sticks with the access point it first connected with.
I don't have a solution for you, unfortunately.

I bought my iPhone 5 three months ago and it keeps freezing, especially after making calls. What is the problem?

Not sure what to do. Will Apple Support cover it? Will it need to be replaced?

I have had the same problem. Between 8-10 minutes into a call the phone freezes and drops the call. I cannot do ANYTHING for about 45 seconds while it says CALL ENDING. I cannot use the phone at all and if anyone tries to call me it goes straight to VM. I am on my 3rd iPhone 5 now due to this issue and another issue of a bad speaker. I have restored, restarted, spent hours setting it up as a brand new phone all for not. It still drops the call and freezes. Makes me so mad.

All CAPTURE AND PRINT files saved on my mac are blank -what is the problem

Similar Messages

Maybe you are looking for