All cd's are seen as blank cd's

I'm not exactly sure what the issue is and every time new information is discovered, it gets even weirder. So I put in a blank cd. pcmanfm shows a blank cd. So far so good. I burn a cd and it's successful. The cd ejects and I put it back in to test it out. The cd is still blank. I try to burn it again and the program freezes. I close it out, toss the cd and try again. Same thing. I start trying to diagnose the problem and start with the obvious. I pop in a regular cd and it says it's blank. I boot into my windows partition and it still says it's blank. I grab another computer and try one of the cd's I burned and it plays perfectly well. I checked my BIOS and there's not really any relevant settings. I'm at a complete loss. I have no idea what would cause a cdrom drive to see everything as blank but still be able to burn. Any ideas?

Thank you for the response but I believe I figured out what the problem was!! I ran a virus scan and it ends up I had a trojan virus. My virus scan contained the virus and I try to import cds again and it worked! Not sure if this was the true reason or not but it works again and I am happy!

Similar Messages

After reinstalling game, the achievements from Game Center doesn't uploaded to the game and starts from the beginning . All the achievements are seen in the Game Center . How could I upload the last progress into the game?

After reinstalling game, the achievements from Game Center doesn't uploaded to the game and starts from the beginning . All the achievements are seen in the Game Center . How could I upload the last progress into the game?

Hello there, Elena Lyubina.
The following Knowledge Base article offers up some great steps for troubleshooting issues with an application not functioning as expected:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

MY photosmart B 210 is not printing with the black ink at all. Pages are coming out blank

Print report says ink is low in the colours but they do appear on the sheet but no black ink at all
It is a relatively new cartridge and genuine HP ink. Stopped suddenly
Pages from print or copy are coming out blank.
Tried to clean print heads and it says
Print System Failure : Oxc19a0003
and tells me to switch printer off and back on which I have now tried but getting the same message!
What does this mean?

Hi @BrendaMC,
Welcome to the HP Forums!
I noticed that your HP Photosmart B210 printer is not printing black ink, and that the pages are coming out blank. I am sorry to hear this, but happy to help!
I would suggest to go through the following guides:
Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Photosmart Plus e-All-in....
'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error M....
Ink Usage in Inkjet Printers.
Hope these guides are helpful, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Does my stolen iphone mean all my emails are seen and my laptop is vulnerable too

my iphone has been stolen. will all my emails be seen and does this make my laptop vulnerable as well?

Did you have a passcode lock on your phone? If you did (and it wasn't a trivial one like 0000 or 1234) then your information is safe. However, if you did not have a passcode you need to change every password you ever used from the phone immediately.
Did you enable Find my iPhone before it was stolen? If you did go to https://icloud.com/find and put the phone in Lost mode.
And also follow @Imp68's link.

CRM 2007 -- All India Activities are seen by all user

1.We have given authorization to user by State wise but users are able to see all india activities .
2. user are able to see their respective state business partner , they cant see all india master data.
Please suggest how to do it .
Regards,
Anup

hi,
u can follow this:
In your scenario, are the users the employee responsibles of the activities.
If so, try to search at your inbox, with the following criterias:
Document Type: Activities or interaction record
Employee Responsible: Me
This will return the interaction records that the agent is responsible for.
Thanx
Chinmaya

All burned discs are coming up blank.

Hi
So I've burned some DVDs and after it is done it refuses to believe there are any files on it. The reflective side shows that difference in colour in the areas used and it takes its time burning and verifies afterwards so the files are there. I've used Disk Utilty to burn to a DVD and I've tried manually adding files to a DVD both with the same results. No problems burning or verifyng, nothing there.
Thanks
Ben

Hmmm, might try this Ben,
First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop for now...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

Hi all, when I open a New Tab pg all the images are blank - I've tried clicking on the blank images, & dragging a link from the Bookmarks, without success!

I want to achieve at least one of two things: either set New Tabs to open with Google automatically; or at least, to have Google pinned to the New Tab page. (Google is my home page.) When a new page opens, all the images are blank. I've read through the Help pages & tried various things. I've tried dragging Google from the Bookmarks to the New Tab, but this only opens Google. I've tried clicking on the blank images, but nothing happens. I've toggled the blank images off for now, so at least I don't need to look at them. I am doing a university course online, so efficiency is really important to me! Those extra clicks really add up & distract!... Thanks in advance :)

# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''', to continue to the about:config page.
# Type '''browser.newtab.url''', in the bar on the top of the page.
# Double click the first result, '''a new window should appear'''.
# Type '''www.google.com''' in the window, click ok.
# '''Open a new tab''', does it go to google?

Why my iMessages are seen on all connected devices to the iTunes account, Why my iMessages are seen on all connected devices to the iTunes account

Why my iMessages are seen on all connected devices to the iTunes account, Why my iMessages are seen on all connected devices to the iTunes account?

No problem, it is still much the same advice but you'll need to use third party tools to extract the data.
See this post from forum regular Zevoneer for some options.
If there is a chance that you've got some overlap you might want to use my DeDuper script. See this thread for background.
tt2

All my photos are missing in iphoto 4.0.3.

All the photos are missing in my iphoto 4.0.3. The files are on the side under source but the screen also stays blank in every file. What to do?

I had a similar situation with some of my photos, not all of them. During help from a genius at Apple an error occurred and we feared I might have lost my photos. When the problem was "fixed", the photos showed up as being taken the same day and no longer in the original order. In addition numerous photos were gone.
I'm told the photos still exist on the HDD but just can't be found by iPhoto. If this is the case how do I find them? Would I be able to do a search for all jpg files to do this?
On a side note: I've backed up my HDD to an external drive and I'm about to erase my HDD and update Panther to Tiger. When I move the user files back to the HDD I plan on consolidating them into one user.
Any insight is most appreciated.

I recently tried to erase a seas gate expansion external harddrive and when i did all that shows up in disk utility now is something called expansion and all my opitions are greyed out in the partation tab, it doesnt mount and idk what to do please help,

when i did all that shows up in disk utility now is something called expansion and all my opitions are greyed out in the partation tab, it doesnt mount and idk what to do please help.
Running macbook pro 2.53ghz late 2010
mountain lion
8gbs mem

I would try it on a PC and see if you can format it, then put it back on the Mac and try again. If it's not seen on a PC, then there's the strong likelihood that there's a hardware issue; either the bridge/chip set or the HD itself is dying/dead. There's also the small possibility that the cable is faulty, so I'd try a different cable too.

I cut and pasted a description from the Internet. It posted as a link in iPhoto. It seems to have made a global change--all my descriptions are now blue, underlined, and Times Roman 12 rather than Arial white. How can I get this back to the default?

I cut and pasted a description from the Internet. It posted as a link in iPhoto. It seems to have made a global change--all my descriptions are now blue, underlined, and Times Roman 12 rather than Arial white. How can I get this back to the default?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Lost al .pages and .numbers docs , iphoto and office programs won't open after changing: auto startup in: startup with password. all personal settings are also gone

After i changed this setting: autologin. into login with password i restarted the computer.
it started up with a blank personal surrounding. also my .pages and .numbers documents were gone, personal settings gone, iphoto won't open and office programs wo'nt open.
in finder i can find several .doc documents and i can see that all my pictures are still on the system, But i can't open them.
i was so stupid not to use time machine. But is there way to recover the system with my documents or something??
please help.
System Imac i5 intel 21.5 inch
Software Mac OS X Lion 10.7.3 (11D50b)

Nope, without any backup they're probably gone for good. If you want you can purchase some data recovery software such as Data Rescue. I hope this may be a lesson why it's critical to backup your system, Time Machine is a good place to start.
BTW when posting please use proper grammar, it's difficult to read a post when no caps are used.
Good luck!

After dragging a map and navigating away all other scenes are off centre..

My Flash document contains several scenes, one of them is a draggable map including hotspots/buttons to navigate to another scene.
After dragging the map then navigating from one of the buttons the next frame is remains off centre (as if when the map was dragged the whole Flash movie has been dragged away from the centre stage).
The map is a graphic, inside that it is a button and then inside that the navigational button.
In the timeline in an actions layer I have:
stop();
mapisland.onPress = function(){
    this.startDrag(false,296,317,-55,10);
mapisland.onRelease = function(){
    stopDrag
mapisland.onReleaseOutside = function(){
     stopDrag
And applied to the hotspot button:
on (release) {
    this._parent.gotoAndPlay("Arrow");
The navigation and drag work fine, however as I stated before when navigated to the "Arrow" scene the all that can be seen of it is just a corner.
Any help would be greatly appreciated. Thank You
Ric

If your Jetpack is powered on then you are going to be liable for any data usage that occurs. It doesn't matter if the usage was intentional or not. The best practice while investigating a data usage/overage situation is to power down your Jetpack when you are done using it. That is the only way you can be sure that your sleeping devices are not actually communicating and pulling updates. Situations like this are often why I do not suggest Jetpacks as a primary internet connection from home. Jetpacks are designed to be temporary and mobile internet connections best suited for a traveling business man or someone frequently on the move.
It sounds like you have done everything that VZW can normally do in an overage situation. You had your first overage wiped, had the device swapped out and changed passwords (although that shouldn't matter from your description). The only loose end you haven't tended to is leaving the Jetpack powered on when not in use. That or switching to a different Jetpack model or 4G LTE device (ex. USB modem+router or 4G LTE router) to see if they behave any better.
My suggestion would be to terminate considering the amount of time and money you have already invested in this situation. Give another service provider a chance and see if the performance is any better. If you spend more time troubleshooting it should be on how to handle the termination fee (which is pro-rated). VZW will still be here if you decide to return down the road, perhaps things will be better.

I used time machine, now my drive has failed and all my files are lost.

i used time machine, now my drive has failed and all my files are lost. any one know how to get the max osx to see the drive again so i can retrive my files

kabb30 wrote:
i used time machine,
Ok, check
now my drive has failed
Which one, the TM drive or the internal boot drive?
all my files are lost.
Where? on both drives or just TM or the internal drive?
any one know how to get the max osx
yea, if we knew more details of your machine and what you had before and later
to see the drive again so i can retrive my files
I don't know what drive failed.
I'm thinking here your internal drive failed? Was it replaced?
You have a blank internal drive and a TimeMachine drive and your asking how to reinstall OS X so you can restore from the TimeMachine drive?
How are you getting here? Another machine or device and what is it?
We need more details of your situation please.

I upload a podcast each week using Podcast Maker. When I search the iTunes Store to determine if the most recent one is listed all the podcasts are in random order. This week's is

I upload a podcast each week using Podcast Maker. When I search the iTunes Store to determine if the most recent one is listed all the podcasts are in random order. This week's is #14; last week's is #1. Any ideas how to correct this? The odd thing is that when you try to subscribe to the podcasts, they are listed in the proper order.

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

All cd's are seen as blank cd's

Similar Messages

Maybe you are looking for