All characters in bash are always selected
Hello there, I just registered because I got a disturbing problem.
I'm not sure if I should post this in the Newbie Corner but I think it's fitting better here. I installed Arch yesterday with Cinnamon as deskop and everything went well - I love it.
But since some hours I'm experincing a mithering misbehaviour concerning my bash. The Problem is, that the characters in the bash are selected from the start. If I try to select a specific part with my mouse, this part becomes unselected ("normal"). I hope this is understandable, if not I will attached a screenshot.
This a heavy problem and it's impossible to work on vim anymore. I'm not sure what caused this behaviour...it could be the todays system update. (Maybe it has something to do with the first connection to my extern display and the subsequent xrandr-command? Sounds not legit but I don't know...).
Help would be appreciated since my system is not really usable at the moment... Thanks in advance! :)
Thanks for the answers, I'm using the standard terminal-emulator delivered with cinnamon, I think it's the gnome-terminal. But I didn't figure out yet how to solve invert the highlighting...
Similar Messages
-
Bug in Keychain. All characters are replaced by strange symbols...
Hello,
For 2 weeks, I have a problem with the Mac OS Keychain.
All characters are replaced by strange symbols...
To see the bug : http://nsa20.casimages.com/img/2010/12/03/101203090829665703.png
(my system is in french)
Do you know how to solve this problem, please ?
Thanks...Not a keychain bug, but a font issue. Restart and boot into safe mode as described in http://support.apple.com/kb/HT1564?viewlocale=en_US (you might need the French version), then do a normal boot. Once that's finished, launch Font Book, select all fonts, validate them and resolve duplicates, and restart. That should fix all your font issue.
-
I can't find my plugged-in devices anywhere in iTunes, the "File>Devices" selections are always shaded. I would like to show the devices' status whenever I select iTunes on my Mac. Any ideas?
riteon wrote:
I would like to show the devices' status whenever I select iTunes on my Mac.
First, the devices would have to be connected ...
Additionally, do all your devices use an Apple ID that has been authorized on your Mac? If not, go to Store > Authorize This Computer in iTunes' menu and make sure the devices' Apple IDs are authorized. -
I'd like to download a film in English but all films in my iTunes film selection are with Italian audio. I live in Italy of course but is there any way to download films in English language format from Italy?
Click here and follow the instructions to change the iTunes Store country. You’ll need to provide an Italian payment method.
(110156) -
I have a list of bookmark folders. When I want to bookmark a page I select "bookmark this page" but not all of my folders are shown. If the folder is not shown I can not get it to be filed in that bookmark folder. How can I get all of my bookmark folders to be shown. When I go to show "all bookmarks" and select "bookmarks menu" all are shown. I am using firefox 8.0.
I have updated to firefox 8.0.1, did not change the problem. When I show all bookmarks I have 11 folders but when I try to bookmark a page only 5 folders are shown not all 11, why?The problem is that not all of my bookmark folders are shown when I want to bookmark a page. They are shown when I "show all bookmarks" Ctrl+Shift+B but not when I want to bookmark a page. The article how to use bookmarks does not solve my problem. The folders are not shown so I can not use them. Why?
-
I had a ton of appointments on my calendar well into next year. I thought a back up would be nice so I elected to turn on my icloud for my calendar and everything is gone.. i then turned it off but no luck.. it's all gone.. then i checked my icloud on pc and its blank too... did i just lose everything??? so not happy right now
Hello Ronbon13,
Thank you for the details of the calendar issue you are experiencing on your iPhone 4S. On an iOS device, you can configure previous events to sync to your device in the Calendar settings.
If you go to Settings > Mail, Contacts, Calendars, you can set your calendars to sync "All Events" or events ranging from 2 weeks back to 6 months back.
Several settings in Settings > Mail, Contacts, Calendars affect Calendar and your calendar accounts. These include:
Syncing of past events (future events are always synced)
iPhone - Calendar settings
http://help.apple.com/iphone/7/#/iph3d11102c
Thank you for using Apple Support Communities.
Best,
Sheila M. -
How to select all the people that are not in any equipe ?
Hi,
I have a nice SQL expression that gives me as a result all the "AGENTS" (people) that are working in an EQUIPE (a team)
select a."AGENT_ID",
a."NOM" || ' ' || a."PRENOM" "Nom",
c.libelle "Equipe",
a."DATE_EMBAUCHE" "Date embauche",
a."DATE_DEBAUCHE" "Date débauche"
from OBSERVATOIRE."AGENT" a,
observatoire.equipe_agents b,
observatoire.equipe c
where a.agent_id = b.agent_id
and b.equipe_id = c.equipe_id
order by nom
Now, how to select all the agents that are NOT working in any "EQUIPE" (team) ?
I have tried but could not succeed !
Thank you for your kind help.
ChristianChristian from France wrote:
It is not working because the table EQUIPE_AGENTS does not contains a row if the agent is not into any equipe.
CREATE TABLE "OBSERVATOIRE"."EQUIPE_AGENTS"
( "EQUIPE_AGENTS_ID" NUMBER NOT NULL ENABLE,
"EQUIPE_ID" NUMBER NOT NULL ENABLE,
"AGENT_ID" NUMBER NOT NULL ENABLE)
CREATE TABLE "OBSERVATOIRE"."AGENT"
( "AGENT_ID" NUMBER NOT NULL ENABLE,
"GRADES_ID" NUMBER NOT NULL ENABLE,
"NOM" VARCHAR2(50 BYTE) NOT NULL ENABLE,
"PRENOM" VARCHAR2(50 BYTE),
"DATE_EMBAUCHE" DATE NOT NULL ENABLE,
"DATE_DEBAUCHE" DATE)
The only way to "know" if an agent is not into any equipe (team) is to search into the EQUIPE_AGENTS table, and if we do not find the ID of the agent into this table, then we know that this agent is not into any EQUIPE (team).
I don't know ho to translate this into SQL.And that's what my query does. It uses an OUTER JOIN so that a result record is returned whether or not there is a record in EQUIPE_AGENTS. And the check for EQUIPE_ID is NULL restricts the result set to those where there IS NOT a record in EQUIPE_AGENTS.
A more traditional way would be to use NOT IN or NOT EXISTS clauses, but they can prove inefficient. -
Cannot deselect images ,always selects 2 images so settings are always on sync. tried control D
cannot deselect images, always selects 2 images from the folder i am in, so sync setting are always on. tried control D but then automatically selects 2 Images
This has happened to me too. I had to quit the lightroom application and restart it to fix this problem.
-
When attempting to print in Pages, I keep getting a message that no printer is detected. I have checked all connections and they are solid, this printer has always worked before, and even if I try to add it, I still get that message. I can print from all other applications, just not any Pages documents.
You may just have an outdated printer driver.
Menu > Edit > Print > Printer: Add Printer
Peter -
All projects are always open/workflow?
Is it accurate that in FCP X all your projects are always open? You can't open just one at time? If that's true, that's just... well I don't want to use profanity.
Isn't that a ridiculously inefficient use of memory and computing power? It's also forces a much less organized workflow and tons of visual clutter?
One more question: Can I work on a FCP X project on a hard drive connected to my desktop, eject the drive and continue where I left off on my MacBook Pro... just like I frequently do in FCP 7?Hi Michael,
I am experiencing a similar problem in the staffing dashboard. It is only displaying 5 resources (Resource Dashoard) and 5 projects (Staffing Dashboard). I think it has something to do with the level you are talking about. WHere do you configure that.
Thanks,
Regards, -
I just updated to 10.9.4 and all my mail accounts are now offline. Unable to send or receive mail. nothing else was done except for updating to 10.9.4
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Basic query regarding work-area and select query
hi
dear sdn members,
thanks too all for solving all my query's up till now
i am stuck in a problem need help
1) why basically work-area has been used ? the sole purpose
2) different types of select query ? only coding examples
note: no links pls
regards,
virushi,
Work Area
Description for a data object that is particularly useful when working with internal tables or database tables as a source for changing operations or a target for reading operations.
WORKAREA is a structure that can hold only one record at a time. It is a collection of fields. We use workarea as we cannot directly read from a table. In order to interact with a table we need workarea. When a Select Statement is executed on a table then the first record is read and put into the header of the table and from there put into the header or the workarea(of the same structure as that of the table)of the internal table and then transferred top the body of the internal table or directly displayed from the workarea.
Each row in a table is a record and each column is a field.
While adding or retrieving records to / from internal table we have to keep the record temporarily.
The area where this record is kept is called as work area for the internal table. The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
.g.
data: begin of itab occurs 10,
ab type c,
cd type i,
end of itab. " this table will have the header line.
data: wa_itab like itab. " explicit work area for itab
data: itab1 like itab occurs 10. " table is without header line.
The header line is a field string with the same structure as a row of the body, but it can only hold a single row.
It is a buffer used to hold each record before it is added or each record as it is retrieved from the internal table. It is the default work area for the internal table.
With header line
SELECT.
Put the curson on that word and press F1 . You can see the whole documentation for select statements.
select statements :
SELECT result
FROM source
INTO|APPENDING target
[[FOR ALL ENTRIES IN itab] WHERE sql_cond]
Effect
SELECT is an Open-SQL-statement for reading data from one or several database tables into data objects.
The select statement reads a result set (whose structure is determined in result ) from the database tables specified in source, and assigns the data from the result set to the data objects specified in target. You can restrict the result set using the WHERE addition. The addition GROUP BY compresses several database rows into a single row of the result set. The addition HAVING restricts the compressed rows. The addition ORDER BY sorts the result set.
The data objects specified in target must match the result set result. This means that the result set is either assigned to the data objects in one step, or by row, or by packets of rows. In the second and third case, the SELECT statement opens a loop, which which must be closed using ENDSELECT. For every loop pass, the SELECT-statement assigns a row or a packet of rows to the data objects specified in target. If the last row was assigned or if the result set is empty, then SELECT branches to ENDSELECT . A database cursor is opened implicitly to process a SELECT-loop, and is closed again when the loop is ended. You can end the loop using the statements from section leave loops.
Up to the INTO resp. APPENDING addition, the entries in the SELECTstatement define which data should be read by the database in which form. This requirement is translated in the database interface for the database system´s programming interface and is then passed to the database system. The data are read in packets by the database and are transported to the application server by the database server. On the application server, the data are transferred to the ABAP program´s data objects in accordance with the data specified in the INTO and APPENDING additions.
System Fields
The SELECT statement sets the values of the system fields sy-subrc and sy-dbcnt.
sy-subrc Relevance
0 The SELECT statement sets sy-subrc to 0 for every pass by value to an ABAP data object. The ENDSELECT statement sets sy-subrc to 0 if at least one row was transferred in the SELECT loop.
4 The SELECT statement sets sy-subrc to 4 if the result set is empty, that is, if no data was found in the database.
8 The SELECT statement sets sy-subrc to 8 if the FOR UPDATE addition is used in result, without the primary key being specified fully after WHERE.
After every value that is transferred to an ABAP data object, the SELECT statement sets sy-dbcnt to the number of rows that were transferred. If the result set is empty, sy-dbcnt is set to 0.
Notes
Outside classes, you do not need to specify the target area with INTO or APPENDING if a single database table or a single view is specified statically after FROM, and a table work area dbtab was declared with the TABLES statement for the corresponding database table or view. In this case, the system supplements the SELECT-statement implicitly with the addition INTO dbtab.
Although the WHERE-condition is optional, you should always specify it for performance reasons, and the result set should not be restricted on the application server.
SELECT-loops can be nested. For performance reasons, you should check whether a join or a sub-query would be more effective.
Within a SELECT-loop you cannot execute any statements that lead to a database commit and consequently cause the corresponding database cursor to close.
SELECT - result
Syntax
... lines columns ... .
Effect
The data in result defines whether the resulting set consists of multiple rows (table-like structure) or a single row ( flat structure). It specifies the columns to be read and defines their names in the resulting set. Note that column names from the database table can be changed. For single columns, aggregate expressions can be used to specify aggregates. Identical rows in the resulting set can be excluded, and individual rows can be protected from parallel changes by another program.
The data in result consists of data for the rows lines and for the columns columns.
SELECT - lines
Syntax
... { SINGLE }
| { { } } ... .
Alternatives:
1. ... SINGLE
2. ... { }
Effect
The data in lines specifies that the resulting set has either multiple lines or a single line.
Alternative 1
... SINGLE
Effect
If SINGLE is specified, the resulting set has a single line. If the remaining additions to the SELECT command select more than one line from the database, the first line that is found is entered into the resulting set. The data objects specified after INTO may not be internal tables, and the APPENDING addition may not be used.
An exclusive lock can be set for this line using the FOR UPDATE addition when a single line is being read with SINGLE. The SELECT command is used in this case only if all primary key fields in logical expressions linked by AND are checked to make sure they are the same in the WHERE condition. Otherwise, the resulting set is empty and sy-subrc is set to 8. If the lock causes a deadlock, an exception occurs. If the FOR UPDATE addition is used, the SELECT command circumvents SAP buffering.
Note
When SINGLE is being specified, the lines to be read should be clearly specified in the WHERE condition, for the sake of efficiency. When the data is read from a database table, the system does this by specifying comparison values for the primary key.
Alternative 2
Effect
If SINGLE is not specified and if columns does not contain only aggregate expressions, the resulting set has multiple lines. All database lines that are selected by the remaining additions of the SELECT command are included in the resulting list. If the ORDER BY addition is not used, the order of the lines in the resulting list is not defined and, if the same SELECT command is executed multiple times, the order may be different each time. A data object specified after INTO can be an internal table and the APPENDING addition can be used. If no internal table is specified after INTO or APPENDING, the SELECT command triggers a loop that has to be closed using ENDSELECT.
If multiple lines are read without SINGLE, the DISTINCT addition can be used to exclude duplicate lines from the resulting list. If DISTINCT is used, the SELECT command circumvents SAP buffering. DISTINCT cannot be used in the following situations:
If a column specified in columns has the type STRING, RAWSTRING, LCHAR or LRAW
If the system tries to access pool or cluster tables and single columns are specified in columns.
Note
When specifying DISTINCT, note that you have to carry out sort operations in the database system for this.
SELECT - columns
Syntax
| { {col1|aggregate( col1 )}
{col2|aggregate( col2 )} ... }
| (column_syntax) ... .
Alternatives:
1. ... *
2. ... {col1|aggregate( col1 )}
{col2|aggregate( col2 )} ...
3. ... (column_syntax)
Effect
The input in columns determines which columns are used to build the resulting set.
Alternative 1
Effect
If * is specified, the resulting set is built based on all columns in the database tables or views specified after FROM, in the order given there. The columns in the resulting set take on the name and data type from the database tables or views. Only one data object can be specified after INTO.
Note
If multiple database tables are specified after FROM, you cannot prevent multiple columns from getting the same name when you specify *.
Alternative 2
... {col1|aggregate( col1 )}
{col2|aggregate( col2 )} ...
Effect
A list of column labels col1 col2 ... is specified in order to build the resulting list from individual columns. An individual column can be specified directly or as an argument of an aggregate function aggregate. The order in which the column labels are specified is up to you and defines the order of the columns in the resulting list. Only if a column of the type LCHAR or LRAW is listed does the corresponding length field also have to be specified directly before it. An individual column can be specified multiple times.
The addition AS can be used to define an alternative column name a1 a2 ... with a maximum of fourteen digits in the resulting set for every column label col1 col2 .... The system uses the alternative column name in the additions INTO|APPENDING CORRESPONDING FIELDS and ORDER BY. .
Column labels
The following column labels are possible:
If only a single database table or a single view is specified after FROM, the column labels in the database table - that is, the names of the components comp1 comp2... - can be specified directly for col1 col2 ... in the structure of the ABAP Dictionary.
If the name of the component occurs in multiple database tables of the FROM addition, but the desired database table or the view dbtab is only specified once after FROM, the names dbtab~comp1 dbtab~comp2 ... have to be specified for col1 col2 .... comp1 comp2 ... are the names of the components in the structure of the ABAP Dictionary.
If the desired database table or view occurs multiple times after FROM, the names tabalias~comp1 tabalias~comp2 ... have to be specified for col1 col2 .... tabalias is the alternative table name of the database table or view defined after FROM, and comp1 comp2 ... are the names of the components in the structure of the ABAP Dictionary.
The data type of a single column in the resulting list is the datatype of the corresponding component in the ABAP Dictionary. The corresponding data object after INTO or APPENDING has to be selected accordingly.
Note
If multiple database tables are specified after FROM, you can use alternative names when specifying single columns to avoid having multiple columns with the same name.
Example
Read specific columns of a single row.
DATA wa TYPE spfli.
SELECT SINGLE carrid connid cityfrom cityto
INTO CORRESPONDING FIELDS OF wa
FROM spfli
WHERE carrid EQ 'LH' AND connid EQ '0400'.
IF sy-subrc EQ 0.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ENDIF.
Alternative 3
... (column_syntax)
Effect
Instead of static data, a data object column_syntax in brackets can be specified, which, when the command is executed, either contains the syntax shown with the static data, or is initial. The data object column_syntax can be a character-type data object or an internal table with a character-type data type. The syntax in column_syntax, like in the ABAP editor, is not case-sensitive. When specifying an internal table, you can distribute the syntax over multiple rows.
If column_syntax is initial when the command is executed, columns is implicitly set to * and all columns are read.
If columns are specificied dynamically without the SINGLE addition, the resulting set is always regarded as having multiple rows.
Notes
Before Release 6.10, you could only specify an internal table with a flat character-type row type for column_syntax with a maximum of 72 characters. Also, before Release 6.10, if you used the DISTINCT addition for dynamic access to pool tables or cluster tables, this was ignored, but since release 6.10, this causes a known exception.
If column_syntax is an internal table with header line, the table body and not the header line is evaluated.
Example
Read out how many flights go to and from a city. The SELECT command is implemented only once in a sub-program. The column data, including aggregate function and the data after GROUP BY, is dynamic. Instead of adding the column data to an internal l_columns table, you could just as easily concatenate it in a character-type l_columns field.
PERFORM my_select USING `CITYFROM`.
ULINE.
PERFORM my_select USING `CITYTO`.
FORM my_select USING l_group TYPE string.
DATA: l_columns TYPE TABLE OF string,
l_container TYPE string,
l_count TYPE i.
APPEND l_group TO l_columns.
APPEND `count( * )` TO l_columns.
SELECT (l_columns)
FROM spfli
INTO (l_container, l_count)
GROUP BY (l_group).
WRITE: / l_count, l_container.
ENDSELECT.
ENDFORM.
SELECT - aggregate
Syntax
... { MAX( col )
| MIN( col )
| AVG( col )
| SUM( col )
| COUNT( DISTINCT col )
| COUNT( * )
| count(*) } ... .
Effect
As many of the specified column labels as you like can be listed in the SELECT command as arguments of the above aggregate expression. In aggregate expressions, a single value is calculated from the values of multiple rows in a column as follows (note that the addition DISTINCT excludes double values from the calculation):
MAX( col ) Determines the maximum value of the value in the column col in the resulting set or in the current group.
MIN( col ) Determines the minimum value of the content of the column col in the resulting set or in the current group.
AVG( col ) Determines the average value of the content of the column col in the resulting set or in the current group. The data type of the column has to be numerical.
SUM( col ) Determines the sum of the content of the column col in the resulting set or in the current group. The data type of the column has to be numerical.
COUNT( DISTINCT col ) Determines the number of different values in the column col in the resulting set or in the current group.
COUNT( * ) (or count(*)) Determines the number of rows in the resulting set or in the current group. No column label is specified in this case.
If you are using aggregate expressions, all column labels that are not listed as an argument of an aggregate function are listed after the addition GROUP BY. The aggregate functions evaluate the content of the groups defined by GROUP BY in the database system and transfer the result to the combined rows of the resulting set.
The data type of aggregate expressions with the function MAX, MIN or SUM is the data type of the corresponding column in the ABAP Dictionary. Aggregate expressions with the function AVG have the data type FLTP, and those with COUNT have the data type INT4. The corresponding data object after INTO or APPENDING has to be selected accordingly.
Note the following points when using aggregate expressions:
If the addition FOR ALL ENTRIES is used in front of WHERE, or if cluster or pool tables are listed after FROM, no other aggregate expressions apart from COUNT( * ) can be used.
Columns of the type STRING or RAWSTRING cannot be used with aggregate functions.
When aggregate expressions are used, the SELECT command makes it unnecessary to use SAP buffering.
Null values are not included in the calculation for the aggregate functions. The result is a null value only if all the rows in the column in question contain the null value.
If only aggregate expressions are used after SELECT, the results set has one row and the addition GROUP BY is not necessary. If a non-table type target area is specified after INTO, the command ENDSELECT cannot be used together with the addition SINGLE. If the aggregate expression count( * ) is not being used, an internal table can be specified after INTO, and the first row of this table is filled.
If aggregate functions are used without GROUP BY being specified at the same time, the resulting set also contains a row if no data is found in the database. If count( * ) is used, the column in question contains the value 0. The columns in the other aggregate functions contain initial values. This row is assigned to the data object specified after INTO, and unless count( * ) is being used exclusively, sy-subrc is set to 0 and sy-dbcnt is set to 1. If count( *) is used exclusively, the addition INTO can be omitted and if no data can be found in the database, sy-subrc is set to 4 and sy-dbcnt is set to 0.
if helpful reward points -
Regarding Mail: When I return to my computer after it has gone to sleep, my accounts go offline, and are always asking me for the password. THis is very annoying. How can I prevent this?
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access. -
Not all characters showing up in "Import Settings" dialogue
On the "Import Settings" dialogue in preferences, not all characters are shown when you select an encoder and use a custom setting.
For example:
When you select AIFF encoder and click "Custom...", sample rate and channel is shown as "sample rat" and "channe".
Can someone tell Apple to fix this?Sounds like you have "Compilations" switched on.
In Itunes look at "get info" for the missing artists and see if the part of a compilation box is checked.
On you iPod go to settings>compilations and toggle it to off
To get the artists to show up on the Ipod you only need to do step 2.
When you have the compiliations features switched on (in either iTunes or iPod) artists that only have albums that are compilations will not show up in the artist list.
As for your other problem you can sort the columns by clicking on the title bar at the top, to sort by artist or you can add something to the "Greatest Hits" album title to differentiate it - for example all my greatest hits albums are titled GH - Artist so I know which one is which -
All my PDF forms are automatically transformed in word forms,how can I change that and only decide which PDF to be transformed in word
Hi Ulfsch,
Thank you for posting on the Adobe Forums, kindly try the step mentioned below.
1) Right click on any of the PDF file and choose the option open with
2) Select choose default program
3) Select Adobe Reader/Acrobat from the list
5) Check the box "always open this type of file with selected program" (not the exact same wording)
6) Click OK
If you are on Mac, CTRL+Click on the file.
Go to Get info
Go to Open with
Change it to Adobe Reader/Acrobat and click change all.
Thanks,
Vikrantt Singh
Maybe you are looking for
-
Problem in creating a row in backing bean for a view object..
hi, i've created a view object and am trying to create multiple rows in my backing bean. but am not able to do that one. my 1st row is getting inserted and all the other values am not able to do. can anyone reply to this as soon as possible. Thanks i
-
I have a DM*******FJ3 iPad I put a SIM card in it and it worked beautifully I went away the sim does not work abroad and updated the management programme while away When I came back the sim wouldn't work and when rebooted after update an error messag
-
Hi All , Is there any Function module that gives me all the details of the PO ? which is available in the transaction ?? Thanks .
-
Same SmartForm printing sometimes and sometimes not with format error
Hi Gurus, I was doing one change and a typical error I am finding while trying to print / see print preview of the smartform. The changes I did was I shortened some window heights and inserted one window to display the "Revision Number" in between. T
-
Hey guys, I just received my OWC Mercury Elite Pro 500 GB and I need to format it. I'm not really good with the technical stuff on a computer so, please be easy on me. 1) I got the external HD because, I want to move my music, photos, and docs off my