All clients have started facing WMI corrupt issue suddenly
Hi,
Suddenly all the clients in the SCCM have stopped reporting.
Each clients is getting WMI error, and host name not found.
Pls help .
thanks in advance.
Ya, Security patches and .net framework patches were installed.
From the event viewer i checked that, the day i had installed them, the very next day..the event viewer was full of errors.
So i have now uninstalled all of them, and now i am able to connect to the config console as well and also my event viewer is looking clean now.
but the component status are showing many critical errors.
Similar Messages
-
I'm getting S.M.A.R.T. error when trying to install Mountain lion. Hard drive works pretty well despite the Failing status. I understand that many users have been facing the same issue. My hard drive was/is working perfectly. Has Apple patched it yet?
Has someone found a solution which is not replacing the hard drive which works just fine? Or Is anyone aware of a procedure that can force the installation despite the S.M.A.R.T error? Below details of my hard drive
Thanks
ST31******ASQ:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: ST31000528ASQ
Revision: AP24
Serial Number: 6V***5JR
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Rotational Rate: 7200
Medium Type: Rotational
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Failing
<Edited By Host>If you haven't done so, run Disk Utility /Applications/Utilities
to run a live verification.
The drive may be ok at the moment, but that's not to say the drive may fail at anytime.
Hopefully you have all your important data backed up just in case. -
I upgraded my new Ipad to OS 5.1.1, and all apps have started crashing. As soon as I open an app it crashes right away. Tried syncing, restarting, hasnt made a difference.
You mention that you have tried restarting, but did you try a reset?
Simultaneously hold down the Home and the On buttons until the iPad shuts downs. Ignore the Off slider should it appear. This will take ten seconds give or take. After the sut down is complete, press the Onn button to restart. NOTE: this is different from simply shutting down the iPad. -
Hello,
my web pages in firefox are loading to the right of centre, and therefore I cannot scroll down.
This started in the past couple of days and occurs with all websites.
Thank-you.go to help at the top of your browser then click on restart with add-ons disabled, firefox will close then it will open up with just basic firefox, then you can swicth the add-ons back on and it should be ok, ive just done this myself and it worked
-
SCCM Client Installation Error and compmgr service issues
Hi dudes,
Hope you all are good. I am getting stuck in SCCM client installation. I have SCCM 2007 R3 setup. It's working perfect but recently getting errors in
sccm client installation after facing some viruses issues in my environment.
I search on that error but nothing found any relevant information related
to the below error. I tried to manually installing the client but getting the error ccmsetup.exe is not a valid 32 bit application :(. Also while trying to start the configmgr service manager in tool box it gives the below snapshot error. Any help relevant
to the below error very meaningful for me.
Regards,
MohsinHi Jason,
Thank You for your response. Yes i tried it to manually start the service on client machine but it give the below error,
For component service manager, yes we are going forward to the restoration process using VM restore(as sccm is deployed on a VM and we take the full vm backup).
Regards,
Mohsin -
All calendar invites i send say for example 9am, but show 8am by my clients!!! Seems to have started with daylight savings help. What do i do? change on my MAC settings or icloud?
HelpHi
Keeepcool,
I am sorry to tell you that this forum is only covering the C# programming language, IDE, libraries, samples, and tools. Since your issue is not clear to us. I will move your thread to "off-topic " forum. If you have any others issues about C#,
Please feel free to post in this forum. Thanks for your understading.
Best Wishes!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I uploaded the latest X Yosemite and fond that Aperture did not work. Then I started the new Picture but are not able to upload all my pictures (app half of them) have anybody had the same issue? and can potentially advise me on how to fix it?
Thanls Ernie. I found the solution. My problem was previous to 10.10.3. It looks like the installation of final cut and uninstallation of fcp delte a plugins that was needed for Aperture. I recover from time machine my plugins in Library/frameworks/plugin.manager.framework and now Aperture works ! Ouf....
-
Start-up Disc Corrupted all the time
Start-up Disc Corrupted all the time
MacBook Pro early 2008 running 10.6.4 and Windows 7.
My MBP, early 2008, 2.5 GHz, 4GB Memory, HARD Disc 250 GB Hitachi (HTS 542525K9SA00) needs disc repair and erase and reinstall ever 5 days or so. This problem started in 10.6.3 and is continuing in 10.6.4. Which was updated by combo 10.6.4 and backed up with time capsule/time machine.
Even though it will not start up on Mac 10.6.4 it will still boot up on Windows 7. It will also boot up with the Snow leopard disc and repair. However some times even after the repair it will not boot up and I have to reinstall 10.6 + about 5 times
I have completely erased and zeroed out and reinstalled twice but I still get the problem about 4 days later. This was necessary because even though the disc was repaired successfully it would still not boot up.
In reading about Resolving Disk Corruption at http://www.thexlab.com/faqs/repairprocess.html#Anchor-Using-47857
The article suggests that a 'Bad Sectors' can cause this problem and suggest a complete zeroed out rein install, which I have done, They also recommend the purchase of DiskWarrior or TechTool Pro. Both are around US$95 on line. Which one is the best to purchase?? They say that TechTool Pro can identify a 'Bad Sector'
The article also suggested Bad sectors can be an early indication of a hard drive that will eventually need to be replaced.
I have now order a new 320 GB Hitachi HB from USA and it will take about 14 days to arrive. I have also completely erased and reinstalled again, but this time I have not reinstalled window 7.
I have also reset the power and PRAM a number of times but it made no difference to the problem.
I have not shut down the MacBook and I am leaving it in sleep mode as the problem really only seems to come about when the MacBook has been shutdown for a day or two.
I am quite sick of reinstalling. Has anyone else had this problem and is it my HD or software issue???
I have also reset the power and PRAM a number of times but it made no difference to the problem.
Best Regards PeterbillGurus - Can you please advice on this. Basically have developed a form and couple of users want to access that but get error " page cannot be displayed" and I figured out the "Start OC4J instance" windows gets closed automatically after some hours.
so I wanted this OC4J instance to run 24*7 ( always) without closing by itself. Please advice how could I do that.
Thanks
Sheik -
SCCM 2007 - All clients from primary site have vanished from central site collections
Hi all,
we have a SCCM 2007 R2 setup with one central site, one Primary Site (A) with a secondary site hanging off it and another Primary Site (B). Suddenly all the clients from the Primary Site A (and also it's Secondary Site) have vanished from the central
site. All the clients are still present when we check Collections from the admin console on Primary Site A site server - they have simply disappeared when we check Collections from the Central Site admin console.
Can anyone provide any info on a good starting point for troubleshooting this issue? As a sidenote, we can still push packages out to the Primary Site A distribution point and both the Primary and Central site can communicate/ping each other.
Any help/info would be much appreciated!
ThanksCheck the
site replication on central site, is that SQL is working fine, and also see the
inbox folder in central site, might be there is backlog and those DDR files are
not processing, and after maintenance they got deleted.<o:p></o:p>
please run
the heartbeat discovery by hour or day, and once the clients will sent all the
DDR files then they will appears again.<o:p></o:p>
Sharad Singh | My blogs: SharadTech | Twitter:
@SinghSharaad | | Please remember to click “Mark as Answer” on the post that helps you.This can be beneficial to other community members reading the thread. -
My MacBook Pro HD crashed. It is all up and runmning except for one issue. I have about 200 songs on my iPhone but have only gotton 53 back on my laptop from my iPhone and those are the songs I purchased via iTunes. How do I get the rest of the songs from my iPhone back onto my HD.
The songs I'm not able to import casme from CD's. Nothing from napster etc.
I've tried and tried to import them rom iTunes vis "Library" " Import"Hey kbert73
I would do a transfer of purchases from the phone and not sync. If you sync then it will want to start over and sync music that is on the MacBook Pro. If you want to transfer the music, check out the article below that will give you multiple options on how to move. I have also provided on how to sync with multiple computers.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
iMac 2.9Ghz intel i5
8GB
21.5"
Data migrated from a macbook pro and previously from an older iMac.
Can I restore to a clean start-up and re-install apps (docs, photo's music etc)from time machine without
bringing the issues that are causing a few issues.
ie Some web sites will not open ( I have checked that the sites are live).
Slow start up.
Some web sites ask me to check cookies- I've not changed them, and the problem is not constant ? (Safari is main browser).
Any advice gratefully received.
Tony1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Broadcom|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
All of a sudden, new tabs have started opening up (in Firefox) advertising games and other stuff. Any idea's of what is going on here?
Try scanning for malware using the removal tools listed near the bottom of the [[Troubleshoot Firefox issues caused by malware]] article.
It might also help if you could copy and paste troubleshooting information into your reply. See [[Use the Troubleshooting Information page to help fix Firefox issues]] for details. -
WRT54GS - all laptops in house have started losing connectivity
I have had this router working fine for a year to two and all of the sudden all of the laptops in the house have started exhibiting the same problem:
- Laptops have very strong signal to the router and are getting an IP just fine
- Attempts to connect over internet has started having lots of trouble that we've never seen before... sites either can't be contacted or when contacted never populate.
I thought it was cable modem / cable isp issue but wired connection, while maybe a bit slow, is working fine. I also downloaded and updated the firmware and that hasn't really helped.
If I dork around with the router settings -- change channel or just flip other random settings like SSID or password -- it will sometimes work for a while (minutes to hours) but will then after a while will get back into the same state where none of the laptops can connect to anything.
Is it possible that other neighbors access points near by are conflicting and trying to use the same channel and conflicting? (I used to only see 1 or 2 others but now sometimes I see as many a 5 - 7). If it might be that, is there any way that the thing can be configured to automatically change channel if it is noticing conflicts?
I've tried everything I can think of and would appreciate any suggestions..
ThanksI have the same router and the same problem -- I've also had this router for about 2 years and it has worked fine until now. I have 2 laptops with wireless connections and a desk top with a wired connection. A few days ago, the wireless connections stopped working (when I connect the laptops via a wired connection, they work fine). One laptop doesn't see the router at all. When I search for networks on the other laptop, the router shows up with excellent signal strength (100%) but when I try to connect, I get an error indicating that "the selected wireless network is out of range or unavailable".
I updated the router firmware to the latest version and used the SES feature (which seemed to do nothing other than lighting up the logo on the router itself). I still get the same error, but occasionally I also get an error indicating that the encryption settings don't match -- I've checked the setting and they do match (no encryption.
I tried the settings suggested by helm -- they had no affect. Any other suggestions would be more than welcome.
Thanks. -
fire fox opens with tabs from preveous session not home page in tools under options and tab general I have start up with home page but all tabs from previous session open instead
It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore -
My iMac (2011) has been persistently throwing this error message: "SafariDAVClient quit unexpectedly." This started when I moved up to Mavericks, from Lion. Nothing crashes, and all I have to do is click "ok" to get rid of the error window. Still, annoying, as this darn Error message pops up at least every 60 seconds Help?
Here is thev error data that shows up in my Console after it happens. Of course, it might as well be GREEK TO ME!:
Process: SafariDAVClient [5937]
Path: /System/Library/PrivateFrameworks/BookmarkDAV.framework/Versions/A/Helpers/Safa riDAVClient
Identifier: SafariDAVClient
Version: 106
Code Type: X86-64 (Native)
Parent Process: launchd [202]
Responsible: SafariDAVClient [5937]
User ID: 501
Date/Time: 2014-02-02 15:40:22.026 -0800
OS Version: Mac OS X 10.9.1 (13B42)
Report Version: 11
Anonymous UUID: 38C42EEE-0927-2A62-02AC-FE5E1CEBFA44
Sleep/Wake UUID: F4BAEB51-39DA-42AE-8105-AB27895B59BD
Crashed Thread: 0 Dispatch queue: com.apple.Safari.BookmarkFolder.childrenAccess
As well, my iCloud Pref Pane will not open!
What the HECK is goin' on?feckinHell wrote:
As well, my iCloud Pref Pane will not open!
That's related since the process is attempting to load your Safari bookmarks from iCloud, and is crashing for some reason.
Try this:
Select the entire line that follows (triple-click to select it), then control-click, and from the contextual menu that appears, select Services > Reveal in Finder:
~/Library/Caches/com.apple.iCloudHelper
Drag that entire folder to the Desktop.
Quit Safari.
Attempt to open iCloud Preferences again. If it opens de-select Safari.
Launch Safari again and determine if the problem is fixed.
Maybe you are looking for
-
I am out of ideas here. I had several program installed for months with no issues. Every update was fine. I haven't moved any installations or changed configurations, etc. I have probably a dozen CC apps installed or more. Then out of nowhere, I star
-
RFC issue in Triggering workflow
Hi, I am trying to trigger a custom workflow from EP in Newly set up ECC 6.0 system. Problem here is, Business object Event is getting triggered in R/3 with custom workflow as reciever, but the workflow is not going to the first stepThe event trace (
-
When open file in firefox where is it stored windows 7
When I open a file without identifying where to save it (eg- excel sheet), where does it get saved while the app (eg Excel) is launched? I'm using FF 11, w Win 7
-
Iphoto, Imovie and Preview constantly freezing
Hello, since updating to Mavericks a couple of months ago, I'm experiencing a lot of problems with this Imac. The Iphoto library will open just fine, but am unable to open a single picture. Also importing from 1 of our devices: Ipod touch won't work
-
When i search a song on the iTunes store nothing shows up
when i search a song on the iunes store nothing shows up even sometimes the artist does not even show up. All i will get is the bar across the top with the labels of popularity, artist, time etc