All clips in project are zoomed in

I was trying to put a title with a cross dissolve and hit something that made all the clips in my project zoom in. There is a tiny little rectangular box with a smaller red rectangular box in the canvas. Can anyone help me so I don't have to start the project over?
Tracy

I was still in an editing mode in the canvas. Once I selected the "crop" button (because I was in that mode still) all the clips went back to normal. Tracy

Similar Messages

Is there a way to force for rendering ALL clips in work area?

Is there a way to force for rendering ALL clips in work area? All clips: not only the ones with the red horizontal line indicating that they need rendering! I ask for this because the rendered clips preview very smoothly, but the unrendered ones do not! My source footage (and project) involves Full HD (1920*1080i 25fps).

If a Clip does not need Rendering, it will not be Rendered.
Basically, what Rendering does is to convert the Clips, that do require Rendering, to DV-AVI (SD Projects on a PC). This will yield AVI files in the Media Cache, Render Files, and for playback, PrE will rely on those. If you look in the Render File folder, you will see a bunch of abstractly named files, but those files are now Linked in the PREL (Project file), and will be used by the program for playback.
If one were to remove those Render files, and then Open that Project in PrE, they'd receive a message, "Where is file 04u434ip0ow.AVI?" [Note: that is just an example of the abstract Render file name, and is not the actual name, that one would see.]. One could Ignore those now missing Render files, and where they were used, there would then be red lines over those Clips.
As Steve mentions, the Render files are used only for smoothest playback. As I use DV-AVI files for SD Projects on my PC, I will not need to Render for smoothest playback, until I make changes to the Clips, like overlay Titles, PiP, Effects, etc.. I might never Render the Timeline, even with those additions, but sometimes, I will Render a small segment many times, especially with animated Effects, as I adjust the parameters.
If one is not getting the smoothest playback, then Rendering all files requiring Rendering will usually improve playback greatly.
Good luck, and hope that this makes sense.
Hunt

Running Aperture on 10.4.11 and all of my projects are gone

As stated above, all of my projects no longer appear in the inspector, but they still are on the external hard drive where they belong. Trying to figure out what happened and what I need to do to get Aperture to see them again. Any assistance would be greatly appreciated.

What is your Aperture version?
In Aperture 3 the "Switch to Library" is here:

Analyze ALL clips in project for image stabilization

In older versions of iMovie for Mac (I used iMovie '09 until I finally get myself to switch to the recent version) I was able to analyze ALL clips for image stabilization, which took some time but could be accomplished without me sitting in front of my Mac. Now it seems that in iMovie 10 the stabilization feature only works for the selected clip. That means you select it, click the stabilization checkbox and wait and wait and wait. Then you get to make the right setting (percentage) and move on to the next clip, click the checkbox and wait and wait and wait.
I tried selecting all clips with Cmd + A and click the checkbox, and the wheel started to spin. I was already feeling lucky to have found the solution to the afore mentioned problem, but when the wheel stops spinning and I select a random clip, some of them are analyzed but most are not.
Is there any way to have ALL clips analyzed without user interaction?

Welcome to the discussions...
I've had this happen. My guess is that it's related to round-tripping to/from Color, but I can't be sure. IMHO, the sequence is corrupted. I just dealt with it for a while, then rebuilt it by making changes from an earlier version.
Sorry I don't have a better solution, but at least you know you're not alone.
Patrick

I have produced several short iMovie projects and want to link them into a continuous stream on a DVD. Can it be done? All of the projects are in my Moblie Me Gallery

I have produced several short (2 to 3 minute) iMovie projects and want to link them in a continuous stream on a DVD. The clips are in my Mobile Me gallery. How can it be done?

You can do that too, it's all in the iDVD program.
But first you want to assemble the separate clips into one big long clip. For that you would use iMovie. Share to the Media Browser (choose the Large size). Let it export then quit iMovie.
Open iDVD, click on the Media button and then the Movies button. Under the iMovie star icon you will see your final assembled clips movie. In the iDVD project window turn on the map view (it's little boxes that look like a flowchart) then drag the iMovie project into the first box:
You can set the project to startup without a Menu, and then loop continuously as well. Go up to the Advanced Menu then click on the Loop movie option to turn it on.
Once checked the Loop movie status will appear as curved arrow icon in the Project Window:
In the lower right corner is the icon indicating this video clip will loop while being played.

Adding one effect to all clips in project

I Just need to know how to add the unsharp mask to every clip In my project at once.

EFfects are added to layers in the comp, not clips in the project window. Unless you already have them all in a comp and could use this comp as a layer in another comp, you will have to apply the effect individually with whatever means you deem best Like saving a preset and applying it or usi gcopy&paste.
Mylenium

I have a project which won't open. I can see it, but when I click on it an animated gb guitar shoots up and the app closes down. I am using an iPad 2. All my other projects are opening fine.

I save my project by returning to my songs, but the app quit. Now I can see my project, but when I try and open it an animated gb guitar whooshes up and the app quits. I have tried rebooting. I'm really not techie at all and will only understand answers that say a) your project's knackered or b) your project's fine, just do this one really easy thing. I am using an iPad 2 and there are no updates waiting.

Sydneybling it does sound like your security software is interfering with the process of installing and utilizing your Adobe Creative applications. I would recommend that you try temporarily disabling your security software and utilizing the directions listed at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html to install InDesign CC.

Upload project to burn not all photographs in project are burned to disc. Why?

I have burnt thre different discs with different Photographs but not all of them are burnt to disc. WHY?

Personally I've never had or heard of this issue. The fact that this appears to be random suggests that the MapFile dropdown may not be displaying the correct map file when you add or assign the mapid. Also check to ensure your project's source files are not located on a network drive as this can cause issues. If this continues perhaps you could give us an image of what you are seeing.
The RoboColum(n)
@robocolumn
Colum McAndrew

Updated to iMovie version 10.0 Opened it. All my clips and projects were there. Then it crashed. Now no clips no projects. If I try and import them they are dimmed. If I try and 'update projects and events' a dialogue box says no files found.

Have macbook pro 2012, running Maverick. Updated to iMovie version 10.0 Opened it. All my clips and projects were there. Then it crashed. Now no clips no projects. If I try and import them they are dimmed. If I try and 'update projects and events' a dialogue box says no files found.
Have tried restarting computer, no joy. Help!!

The reply from Nerval fixed it. It is very simple and it works.
If you have a lot of Projects and Events, leave the iMovie running for a long time. I had 160G and it took 4hrs. It is doing it in the background so don't shutdown too quick.
Thanks Nerval.

Project renames sequence and all clips in the sequence when a clip is added

My project is renaming my sequences and the clips in those sequences whenever I add a clip. For example, I have a sequence called "dance section 2", which contains 20 some-odd clips with various names. When I add a clip named "drop from above", the name of the sequence is changed to "drop from above", and the name of every other clip in the sequence is also changed to "drop from above" (video, audio, stills, everything). When I add a clip named "spins", all the names are changed to "spins".
The name of the sequence is changed in both the timeline and the browser, but the names of the other clips are changed only in the timeline. In the browser, they keep their old names. The exception to this is the last clip added before the name changer. For example, if I add "drop from above" to the sequence, and then add "spins", the clip named "drop from above" is renamed "spins" in the browser as well as in the timeline, but the other clips are renamed only in the timeline.
The clips in the sequence also keep their original content - so the sequence looks the same as it did before, but all the names of the clips are changed.
This is only happening in one project. All of my other projects are working fine.
I've tried restarting and deleting preferences. I've also looked at the autosave vault for the project. The backup projects saved after a certain time all behave the same way, and the projects before that time all behave normally. I can't imagine what would have caused this, though, since I've been working on this project all day and nothing's happened to my computer or hard drive or anything.
Also, there are no freeze frames at the beginnings of my sequences (I read another thread with a somewhat similar issue and getting rid of freeze frames seemed to help that person).
I'm in FCP 7.0 on a Macbook Pro.
Thanks in advance for your help!

Welcome to the discussions...
I've had this happen. My guess is that it's related to round-tripping to/from Color, but I can't be sure. IMHO, the sequence is corrupted. I just dealt with it for a while, then rebuilt it by making changes from an earlier version.
Sorry I don't have a better solution, but at least you know you're not alone.
Patrick

I reversed a section of audio, and now the whole project and all of my backups are ruined. Please help

Okay, so basically I was really happy with the track, it has chopped up vocals all from the same vocal track.
I was just experimenting and reversed a section of audio, but didn't save the changes because i didn't want to save this reverse.
however now i've just opened my project and all of the vocals are messed up and not how they were before - and all of my backups are the same. can someone please help me , i feel like crying . I have no idea what has happened - and is there any way i can get it back to how it was before?
Best regards,
Dom

How are they not as before?
I'm not an expert, but as far as I know, when you change an audio clip in Logic you really change the audio file, meaning everywhere else where you have used the same file it will be changed the same way. I'd go for the Audio file list in the Browser and try to find the changed audio file and change it back. Hope it helps!

Help me please someone...In the middle of auditioning loops within a project, all my loops started sounding all wobbly like they are out of phase or something. what can i do to fix this. Thanks

Help me please someone...In the middle of auditioning loops within a project, all my loops started sounding all wobbly like they are out of phase or something. what can i do to fix this. Thanks

raise your I/O buffer and raise your Process Buffer Range.
Logic Pro>Preferences>Audio>Devices>Coreaudio

Upon entering a LV project file into VSS, all files in the project are left out. Only the project shell and settings enter VSS. Any idea why?

Upon entering a LV project file into VSS, all files in the project are left out. Only the project shell and settings enter VSS. Any idea why?
Solved!
Go to Solution.

Chuck72352,
Hello! It is my understanding that you need to add the individual files to the Source Code Control along with the .lvproj file.
Here is a great deal of information on Source Code Control Practices in LabVIEW.
Ben Sisney
FlexRIO V&V Engineer
National Instruments

A project on iMovie 09 that Freezes(only the project) the viwer window blocked in gray ... .. After editing that took me a year I'm stuck . All my finished projects that are in the Library infected with the same symptoms and it happens only after I w

a project on iMovie 09 that Freezes(only the project) the viwer window blocked in gray ... .. After editing that took me a year I'm stuck .
All my finished projects that are in the Library infected with the same symptoms and it happens only after I went into the problematic project.
I tried to open a new project and everything works
...I also tried throwing Recent Files, in the past It solved the problem ,not this time ...
the problem is that this project will take me a long, long time to rebuild
imovie 09
Model Name:          iMac
Model Identifier:          iMac10,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          1.07 GHz

This recently happened to me. I am a novice, but it seemed like that project got corrupted some how.
I deleted it.
Went to time machine and picked it up again when I knew it was working ok.
I lost a few hours of work, but not the entire project.
Once I had the project back from time machine, it worked fine (but like I said, I lost a little bit of work).

FCP X crashed, now all my projects are gone.

So I was working on a project and FCP X crashed (as it usually does).
When I reopened it, many of the clips I had on the timeline were blacked out, with a red line on the bottom half of the clip.
Same for my audio files.
It won't let me reveal them in the finder, says they can't be revealed.
It won't let me relink them.
FCP deleted all of my project files that were stored on my computer hard drive and now when I click on different events in that viewer, nothing happens. I can click on whatever event, but it won't show the subsequent files to the right.
Does anyone have any idea what could have possibly gone wrong or how to help?
Any input would be greatly appreciated.

Heya Christian,
This happened to someone else the other day. The solution was to open the package contents of corrupted library.fcpbundle file from Finder, copy original media to a location outside of the library bundle, then open the latest backup file of the project in FCPX 10.1 and relink the media from the new location you just copied all the media to.
https://twitter.com/LexrunNOS/status/419592770735456256
Hope that helps!
Jasper Thayer
Apple Certified Trainer
https://FinalCutProX.net

All clips in project are zoomed in

Similar Messages

Maybe you are looking for