All data and messaging works on my note 4, but last night the cellular phone service just went dead.  I can call people but the line is just silent, and people can call me, it rings, but I can't hear them.  ?????

all data and messaging works on my note 4, but last night the cellular phone service just went dead.  I can call people but the line is just silent, and people can call me, it rings, but I can't hear them.  ????? What is wrong with it????  How do I fix it????

You aren't attached to a bluetooth headset or other device for some strange reason?  Or even an automobile bluetooth, I have a friend that has this issue with his Prius because even when it is not running the bluetooth is still active and connects to his phone.

Similar Messages

  • HT1320 My 7th generation Ipod nano 16 gig just went dead yesterday. I thought maybe it ran out of juice and needed recharging. Its not taking a charge, or even lighting up to show connection to my computer to recieve a charge. What can I do? Its pretty ne

    My 16 gig, 7th generation ipod nano just died yesterday.
    I assumed it just needed recharging.
    It is not responding. I have complete black screen even when its hooked up to charge....and it wont turn on.
    Help!!!!
    I got it as a birthday gift around the end of May, its brand new.

    Clean out the Lighting connector on the bottom of the nano, clean Lightning connector cable, make sure your computer is not set to go to sleep and connect it to the computer and let it charge for 30 minutes. After this time, while it is still connected, hold down the home and sleep buttons, wait for the Apple logo, let go of the buttons.

  • I was on my phone and it just went dead

    I was playing a game and my phone just went dead. I thought it was the battery so I charged all night and it still wont come on.

    try a reset, hold down the home/power button until you see the apple logo and then release, then wait for the phone to boot back up.

  • A mate has an iphone 4 as a work phone and needs to get all data incl messages onto an old iphone 3 as he is leaving. Is this possible, any help appreciated

    A mate has an iphone 4 as a work phone, now he is leaving and needs to get all data incl messages etc onto an old iphone 3. Is this possible, any help appreciated.
    Robbie

    You won't be able to restore a device running iOS 4.2 from a backup of a device running iOS 5 (as you found out).  And the Iphone 3G can only be updated to iOS 4.2.1 so there is no way to migrate from his iPhone 4 back to his iPhone 3G.  He would have to at least have an iPhone 3GS, which will update to iOS 5.1 and would be able to restore from the iPhone 4 backup.  Unfortunately, there isn't any way around it.

  • Help! I restored my iphone recently and put all my music back onto my phone that day and it was fine but last night i was putting someother music on got an error music on. I got an error message about not being able to sync and now ALL my music has GONE.

    ahh! .I restored my iphone recently and put all my music back onto my phone that day and it was fine but last night i was putting someother music on got an error music on. I got an error message about not being able to sync and now ALL my music has GONE. deos anyone know why this would have happened?

    Click: Restoring your iTunes Library backup (from an external drive) here >  iTunes: Back up your iTunes library by copying to an external hard drive
    BTW, if you are a resident of the U.S, have iTunes 10.3 or later, and iOS 4.3.3, you can re download your iTunes purchases for free.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port.  The MacBook recognises the camera immediately. Can anyone help?

    I have an iMac and also a MacBook. All of a sudden my iMac does not recognise my Canon 500D camera even though I have downloaded 1000s of photographs from it via the USB port.  The MacBook recognises the camera immediately. Can anyone help?

    Thank you for your reply.  I know I can use a card reader however I don't see why I should when importing directly from my camera has worked reliably for years.  The process I use is simply connecting the digital output from my camera to the USB port on the iMac, which has previously automatically opened iPhoto ready for the import.  Now all of a sudden my iMac does not recognise the camera.  However if I connect in the same way to my MacBook then iPhoto opens automatically on the MacBook, recognises the camera and is ready for importing.  So whilst I know I can use a reader, or my MacBook I want to use my iMac in the same way that I have for years.  I can only assume that the settings on the iMac may have changed, but I cannot verify this.

  • How to transfer contacts and message history from samsung note 3 to iphone 6 plus

    Can anyone please help: how to transfer contacts and message history from samsung note 3 to iphone 6 plus?

    You can visit : Move content from your Android phone to iPhone
    From this Apple Support website, you can get information about how to transfer contacts, music, photos, videos,  documents, and more from your Android phone to iPhone. But for text messages, you may need other tool.

  • I got my i phone4s few days back and i created an apple id with a credit card and when i go to the appstore to purchase apps,all have and message stating that "this app is no longer availabe"..how do i fix this issue?im from singapore by the way

    i got my i phone4s few days back and i created an apple id with a credit card and when i go to the appstore to purchase apps,all have and message stating that "this app is no longer available"..how do i fix this issue?im from singapore by the way

    If it is longer available then you can't get the app on your phone.

  • My iPod touch 5th generation isn't working. I plugged it in last night to charge and now its not turning on or responding to anything.

    My iPod touch 5th generation isn't working. I plugged it in last night to charge and now its not turning on or responding to anything.  It used to do this thing where it would freeze when it was 100% charged and plugged in and I was using it.  I'd just unplug it, restart it (home button and top button) and then it would be fine.  That had happened like 5 hours prior to me plugging it in again and then it going totally blank.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I have two iPads and one is connected to the internet but my other iPad was connected then was not and since then I have not been able to add my internet back onto my iPad it only says cannot connect to the server any help would be great thanks

    I have two iPads and one is connected to the internet but my other iPad was connected then was not and since then I have not been able to add my internet back onto my iPad it only says cannot connect to the server any help would be great thanks

    If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
    First, test your iPad on some other WiFi networks: a friends, Starbucks, Barnes & Noble, etc.
    If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
    If your iPad does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
    If you need more help please give the make, model, and version of your WiFi router and how you have it configured.

  • Erased all content on 3G but now won't sync with iTunes. Error states, "This iPhone cannot be used because the Apple Mobile Device service is not started." I don't want phone service on this old 3G. Just want to use it as an iTouch. Any suggestions?

    Erased all content on 3G but now won't sync with iTunes. Error states, "This iPhone cannot be used because the Apple Mobile Device service is not started." I don't want phone service on this old 3G. Just want to use it as an iTouch. Any suggestions?

    Type "Apple Mobile Device service " into the search bar at the top of this page by "Support"

  • I have not upgraded to Mountain Lion yet, have 3 major apps (acrobatpro) and adobe image ready, and apple works that is not compatible, does anyone know how long snow leopard will be supported. Don't want to upgrade until I purchase new iMac next year.

    I have not upgraded to Mountain Lion yet, have 3 major apps (acrobatpro) and adobe image ready, and apple works that is not compatible, does anyone know how long snow leopard will be supported. Don't want to upgrade until I purchase new iMac next year.

    Consider running your Adobe and AppleWorks software in Snow Leopard (with Rosetta) installed in Parallels in Lion or Mt. Lion:
                                  [click on image to enlarge]
    Full Snow Leopard installation instructions here:
    http://forums.macrumors.com/showthread.php?t=1365439

  • I have an ipad2 for two day in the am it would say something about disabled but then would come on in 15 minutes or so.  Today it just went dead and will not do anything.  Any suggestions?

    I have an ipad2 for two day in the am it would say something about disabled but then would come on in 15 minutes or so.  Today it just went dead and will not do anything.  Any suggestions?

    Hard reset by holding down the home button and the sleep/wake lock button (BUtton on the bottom of your display, button you use to turn the screen black) hold them both down for 15 seconds till you see the apple reappear

  • How can I input read a line from a file and output it into the screen?

    How can I input read a line from a file and output it into the screen?
    If I have a file contains html code and I only want the URL, for example, www24.brinkster.com how can I read that into the buffer and write the output into the screen that using Java?
    Any help will be appreciate!
    ======START FILE default.html ========
    <html>
    <body>
    <br><br>
    <center>
    <font size=4 face=arial color=#336699>
    <b>Welcome to a DerekTran's Website!</b><br>
    Underconstructions.... <br>
    </font> </center>
    <font size=3 face=arial color=black> <br>
    Hello,<br>
    <br>
    I've been using the PWS to run the website on NT workstation 4.0. It was working
    fine. <br>
    The URL should be as below: <br>
    http://127.0.0.1/index.htm or http://localhost/index.htm
    <p>And suddently, it stops working, it can't find the connection. I tried to figure
    out what's going on, but still <font color="#FF0000">NO CLUES</font>. Does anyone
    know what's going on? Please see the link for more.... I believe that I setup
    everything correctly and the bugs still flying in the server.... <br>
    Thank you for your help.</P>
    </font>
    <p><font size=3 face=arial color=black>PeerWebServer.doc
    <br>
    <p><font size=3 face=arial color=black>CannotFindServer.doc
    <br>
    <p><font size=3 face=arial color=black>HOSTS file is not found
    <br>
    <p><font size=3 face=arial color=black>LMHOSTS file
    <br>
    <p><font size=3 face=arial color=black>How to Setup PWS on NT
    <BR>
    <p><font size=3 face=arial color=black>Issdmin doc</BR>
    Please be patient while the document is download....</font>
    <font size=3 face=arial color=black><br>If you have any ideas please drop me a
    few words at [email protected] </font><br>
    <br>
    <br>
    </p>
    <p><!--#include file="Hits.asp"--> </p>
    </body>
    </html>
    ========= END OF FILE ===============

    Hi!
    This is a possible solution to your problem.
    import java.io.*;
    class AddressExtractor {
         public static void main(String args[]) throws IOException{
              //retrieve the commandline parameters
              String fileName = "default.html";
              if (args.length != 0)      fileName =args[0];
               else {
                   System.out.println("Usage : java AddressExtractor <htmlfile>");
                   System.exit(0);
              BufferedReader in = new BufferedReader(new FileReader(new File(fileName)));
              StreamTokenizer st = new StreamTokenizer(in);
              st.lowerCaseMode(true);
              st.wordChars('/','/'); //include '/' chars as part of token
              st.wordChars(':',':'); //include ':' chars as part of token
              st.quoteChar('\"'); //set the " quote char
              int i;
              while (st.ttype != StreamTokenizer.TT_EOF) {
                   i = st.nextToken();
                   if (st.ttype == StreamTokenizer.TT_WORD) {          
                        if (st.sval.equals("href")) {               
                             i = st.nextToken(); //the next token (assumed) is the  '=' sign
                             i = st.nextToken(); //then after it is the href value.               
                             getURL(st.sval); //retrieve address
              in.close();
         static void getURL(String s) {     
              //Check string if it has http:// and truncate if it does
              if (s.indexOf("http://") >  -1) {
                   s = s.substring(s.indexOf("http://") + 7, s.length());
              //check if not mailto: do not print otherwise
              if (s.indexOf("mailto:") != -1) return;
              //printout anything after http:// and the next '/'
              //if no '/' then print all
                   if (s.indexOf('/') > -1) {
                        System.out.println(s.substring(0, s.indexOf('/')));
                   } else System.out.println(s);
    }Hope this helps. I used static methods instead of encapsulating everyting into a class.

  • I've never dropped my phone for the 7 months that I've had it but last night I was at a park and when I sat down at a table, my phone as in my pocket and I heard a pop. I took my phone out and the entire screen was cracked. what should I do?

    I've never dropped my phone for the 7 months that I've had it but last night I was at a park and when I sat down at a table, my phone as in my pocket and I heard a pop. I took my phone out and the entire screen was cracked. what should I do?

    Probably not, since user-caused damage isn't covered by the warranty. But you can take the iPhone to an Apple Store and see if there's anything they can do for you. A phone company store will not service your iPhone at all, to the best of my knowledge.
    Regards.

Maybe you are looking for

  • JPEG Meta Data

    Hi guys, very new here actually just registered. I have a problem where I need to ID who modified a jpeg file. What I know:- The file was modified in photoshop (I can see that from the meta data. I have opened the jpg file in notepad and can see all

  • How do I access my *.Nef files in finder and aperture?

    How do I access my *.Nef files in finder and aperture?  What are the key strokes to finding these files. BACKGROUND:       I shot jpg and nef during recent trips overseas, but can only see the jpg files in finder and aperture.  Are the original, the

  • Tr. funds from one A/c to another A/c

    Hi Friends, I am afraid after posted this entry....I was trying to move vendor funds from special GL indicator A to Q from 123456 to 789000. After the transfer, amount in A is zero while transferred amount to Q increased to 7 times ! What was the rea

  • Dynpro Alv Column

    Hi,         I have an ALV grid in which there is a default column appearing for 'Client' (its not be selected in the context field catalog ) which should be removed . Can you pls give some examples to do this . Thanks, Kumar.

  • Photoshop Generate image assets

    When I try to generate an asset from a Ps layer in a subfolder like in the example [subfolder]/Ellipse_4.jpg   , it generate an error txt message: So why doesn't Ps accept the "/" character ?   Thanks for any help. Victor