All dates are not recorded

1. date for photos imported to iphoto all recorded as 5th of the month, not according to the actual date taken. For example, photos taken in Jan 2010, all recorded as 5th Jan 2010.
2. msn cannot save chat history anymore, I checked preference of my msn, correct, no problem. Only name is displayed with empty messages.
I have reformatted my macbook, and the problem is still the same.

1. Have you looked at the extended info (Option Command I) for any of the photos you imported?
It should show multiple dates:
*Original Date*
*Digitized Date* Usually the same as Original, unless you used another piece of software (PhotoShop?) to download the images from the camera or modify the images before you imported them into iPhoto.
*Modified Date* - when you saved the most recent changes (e.g. edited with iPhoto).
*Imported Date* - date image was loaded/imported into iPhoto
In iPhoto ('09) Preferences you can select how imported photos are grouped into events: one per week, one per day, one per 8 hours, or one per 2 hours.
Other thoughts - were the images saved from the camera to some other media before importing them into iPhoto?
+2. Sorry, I can't help with MSN chat history.+

Similar Messages

I have downloaded an ical subscription. It appears on the sidebar as checked, but the data (holidays) are not recorded in Ical. I tried re-downloading, but the same problem exists.

I have downloaded an ical subscription. It appears on the sidebar as checked, but the data (holidays) are not recorded in Ical. I tried re-downloading, but the same problem exists. Can you assist?

drjil,
It is possible that the subscription is not valid or up-to-date.
If you are looking for U.S. Holidays, here are three alternative choices besides Apple - Downloads - iCal Calendars - US Holiday Calendar.
1. Welcome to iCalShare
2. iCal World - Holiday Calendars by Country
3. US Federal Holidays, ICS format, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015.

Restore from time machine does not list all my backups. I know they exist but there dates are not present on the restore list. Any help appreciated.

Restore from time machine does not list all my backups. I know they exist but their dates are not present on the restore list. Any help appreciated. If I must use one of these older dates to restore, how do I then get the more current data off time machine?

Ok, so am i correct in saying that the steps to fix are as follows.
That's one option, but not what I meant by restoring in the time-travel view. The latter is what you get when you enter Time Machine.
is the fresh install not going to be able to "see" the time machine backups that I have at the moment.
It should, but sometimes people report that it fails. I'm not sure why that happens.

Datas are not coming from top to bottom in collumn

Hiiiii
I am moving my data from itab to itab1.
And in itab1 datas are not started from top of the collumn for each a/c no.
A/CNO|AB|DZ|RV|SA
00001|00 |000|00 |10
00001|00 |000|00 |15
00001|00 |000|020|000
00002|00 |15 |000 |00
00002|21 |00 |000 |00
00002|00 |25 |000 |00
00002|00 |00 |000 |17
what should i do to start my data from top of the collumn.
Thanks in advance.
Edited by: sanket sagar on Mar 17, 2011 8:14 AM

Hi,
Let me add some more comments in your code.
LOOP AT IT_BKPF INTO WA_BKPF.
IF SY-SUBRC = 0. - do not use this statement. instead of this u can use a condition for a particular record. ( Eg: if wa_bkpf-belnr is not initial.)
MOVE-CORRESPONDING WA_BKPF TO WA_FINAL.
ENDIF.
READ TABLE IT_BSEG INTO WA_BSEG WITH KEY BELNR = WA_BKPF-BELNR
BUKRS = WA_BKPF-BUKRS
GJAHR = WA_BKPF-GJAHR.
IF WA_BSEG-SHKZG = 'H'.
WA_BSEG-PSWBT = WA_BSEG-PSWBT * -1.
ENDIF.
IF SY-SUBRC = 0.
MOVE-CORRESPONDING WA_BSEG TO WA_FINAL.
ENDIF.
APPEND WA_FINAL TO IT_FINAL.
ENDLOOP.
I think the above loop-endloop will get all the belnrs, and their related info to the final internal table.
SORT IT_FINAL BY SAKNR BLART.
LOOP AT IT_FINAL.
IF WA_FINAL-BLART = 'AB'
MOVE WA_FINAL-PSWBT TO WA_FINAL-PSWBT1.
ENDIF.
AND SAME FOR ALL DOC TYPES.
ENDLOOP.
SORT IT_FINAL BY HKONT .
What is the structure of the internal table.
If my understanding is correct, you want to populate a table as below.
For every HKONT, populate the Document types (BLART) and their corresponding amounts like below.
HKONT1 - AB - 1000
HKONT1 - BC - 2000
HKONT3 - CD - 2000
Please correct it if your problem is something different.

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

All fields are not mapped in transformation 0IC_C03 to 2LIS_03_BF_TR

I have replicated BI7 data sources of 2lis_03_BF,BX & UM from ECC. All the infosources are BI7 infosources.After installing the BI Content for 0IC_C03, infosource 2LIS_03_BF_TR is not active.When I am trying to activate the transformation it is showing a error in START ROUTINE & also all fields are not mapped.
Please suggest a solution.
Thanx in advance.
Edited by: Aritra on Nov 28, 2011 11:37 AM

Hi,
i think you have done some modification manually(either added something and deleted something in transformation) thats why code isn't maching with standard sorce package.
so to resolve this error just remove changes you manually did. or remove that code and again create start routine and paste the code which u need.
Thanks & Regards,
NIKHIL

Event dates are not bolded by Date Navigator in Outlook 2010

Event dates are not bolded by Date Navigator in Outlook 2010 on my own calendar. Events are set to busy but it is not working. View Settings > Other Settings > "Bolded dates in Date Navigator represent days containing items" is
checked. This previously worked for 2+ years but recently stopped working. All plugins were disabled, Outlook 2010 was uninstalled and then re-installed. OST file was deleted and re-synchronized with Exchange 2007. While the OST was re-synchronizing the
bolding worked properly but upon next restart of Outlook it went away. Another symptom is that my Scheduling Assistant does not show my free/busy times correctly in my local view. If I look at my own schedule via the Scheduling Assistant of another user, the
free/busy times show up correctly. My webmail account also correctly shows bolded dates and free/busy suggesting that this is a local problem. Some screen shots below. Anyone have any ideas as to what I need to tweak? Using Oulook 2010 v.14.7116.500 (32-bit).
This is not a shared calendar.

Hi,
If you want to completely uninstall or remove Microsoft Office 2010, we can refer to the following article to do it:
http://office.microsoft.com/en-us/support/how-to-uninstall-or-remove-microsoft-office-2010-suites-HA104027750.aspx
Additionally, since the issue doesn’t happen in other computers, I think the issue may be also caused by some third-party programs in your original computer. If the complete uninstallation doesn’t help for this issue, I suggest we can try to perform a clean
boot in your Windows for more troubleshooting:
http://support.microsoft.com/kb/929135/en-us
Thanks,
Winnie Liang
TechNet Community Support

In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie. Is there someway to refresh the IPhoto event in IMovie?

Background: I'm transferring file folders from a Visa laptop via an external hard drive to my IMac. In the folders are photos and videos from different cameras. SO I first tried to import to IMovie but it would not recognize any of the files. So then I imported into IPhoto and both photos and videos were imported and I created events for each folder. When I first opened IMovie I had to wait for it to create "thumb nails". Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events. I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie. I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie.
I'm doing this on three events with about 100 photos and videos. But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie. I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.
Appreciate any tips or pointers.
OBTW this is my first question as a first time Apple owner.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

In XI pro, exporting PDF to Excel problem. Excel columns and data are not properly aligned. Help?

I used 30 day trial of Acrobat XI and all the functions work perfectly. But, when I buy the program (either download or disk) my PDF that export to Excel is not working. The excel columns and data are not properly aligned as they should be. The Trial version aligns everything perfectly. What is happening? I use a MAC 10.9.5. But this shouldn't matter because the trial version works perfectly. Can anyone help?

just found out that this is posted in the wrong section.

Asset value date and posting date are not in same fiscal year

Hi,
Our business user has created an asset under an incorrect asset class, which he is trying to transfer to a new asset whcih was created under correct asset class. However system is restricting user with the error message "Asset value date and posting date are not in same fiscal year". Can you please advise me how we can proceed further with this error.
Regards,
Asam.

Hi,
To transfer one asset to another asset within a company code can be done through ABUMN only.
While doing this transfer you have enter the document date, posting date, and value date for the transaction, but all these dates should be in same fiscal year only.
In your case you must have been entered the dates for asset value date and posting date , and these two dates are in diff financial years.
Please make sure that both the dates are in same FY.
Hope this will fix your issue.
Thanks,
Srinu

After editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated

With both my Mac's, reset Photoshop C (2014) to previous version 2014.0. Now find that after editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated. Reloaded camera raw, etc., but still find modification dates are not updated, either using Finder or using Bridge to view dates. Editing other files, PSD, DNG, TIFF, etc., are updated and the information is correctly displayed.

Ok, not entirely sure what I did but it's now working (Bizarre!). The only thing I did was 'eject' the ACR 8.6 .dmg file from the finder side bar and restart PS CC, so that may have been where I was going wrong all along!
However, I now have another issue in that there is no preview of the shot in Finder on my iMac when I highlight the NEF file. I assume this is simply because Apple haven't yet released an update for the new D810 NEF files and so the computer doesn't know what it's looking at?!?
If anyone has any other ideas though, then I'm more than willing to listen.
Thanks again.

Data are not being applied at destination side

Hi all,
I have implemented real time streams replication(not archive log based downstream replication).
source:9.2.0.8.0
destination:10.2.0.2.0
Capture and propagation is working fine. DBlinks are also fine. Apply process is running , but data are not being applied in destination side.
The trc file shows this:
Dump file /dev1/visdb10/10.2.0/admin/VIS_wbsebdev1/bdump/vis_p001_14628.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /dev1/visdb10/10.2.0
System name: Linux
Node name: wbsebdev1
Release: 2.4.21-32.ELsmp
Version: #1 SMP Fri Apr 15 21:17:59 EDT 2005
Machine: i686
Instance name: VIS
Redo thread mounted by this instance: 1
Oracle process number: 21
Unix process pid: 14628, image: oracle@wbsebdev1 (P001)
*** SERVICE NAME:(SYS$USERS) 2008-05-29 11:39:26.957
*** SESSION ID:(388.16) 2008-05-29 11:39:26.957
The Alertlog file shows at the end this:
Thu May 29 11:19:06 2008
Streams APPLY A001 with pid=16, OS id=9531 stopped
Thu May 29 11:21:25 2008
Incremental checkpoint up to RBA [0x746.d359.0], current log tail at RBA [0x746.d471.0]
Thu May 29 11:39:26 2008
Streams APPLY A001 started with pid=18, OS id=14624
Streams Apply Reader started P000 with pid=20 OS id=14626
Streams Apply Server started P001 with pid=21 OS id=14628
Thu May 29 11:41:33 2008
Incremental checkpoint up to RBA [0x746.11565.0], current log tail at RBA [0x746.121b9.0]
Pls help.
Thanking You,
Nitesh.

Problem solved.

PS Forecast Dates are not synchronized when Cproject Dates are updated

hello Experts,
I did all necessay customizing for DFM synchonization but when i modify date in Cproject and i check the project defintion in "CJ20N" , dates are not updated.
Do you have any idea why? Project defintion has a statut "PREL".
Thank you in advance,
Amal

Is there a page online demonstrating this problem? I think without taking a look, we might speculate wildly and waste a lot of your time...
One thing that turned on in Firefox 29 is support for <input type="number">. If any of your date fields were using type="number" as a way to be scripted or styled specially, that may no longer work correctly in Firefox 29 and higher.
This article might be useful:
https://developer.mozilla.org/Firefox/Releases/29/Site_Compatibility

Datas are not available to the query when upload a Infopackage

Hello People,
I Would like to know what can be the reason ..why the datas are not available when we execute an upload from FlatFile to the Cube (this one is the last target one).
Considering tere aren´t any poroblem in may target (Cube)
The system shows us the upload was ok, but the status about the "available datas to the query" was not activated.
Thanks,
Rosana.

Hi ,
Please go to T code SE16--> Table RSDDAGGR
Here AggrUID(STARTUID) give not equal to blank, you will get list of all the cubes which has aggregates.
If your cybe is in this list , you need to rollup the data to mae this available in reporting.You can rollupp the data by going into Manage of the cube.
-Vikram

ORA-01008 All variables are not bound

Hi I am running this query and getting this exception ORA-01008 All variables are not bound .
Could anyone please insight ?
SELECT EQMT_INGT_LOG_ID, EQMT_ID,
XMLSerialize(DOCUMENT XMLType(ingLog.BUCK_SLIP_XML) AS CLOB) BUCK_SLIP_XML
FROM TOS_EQMT_INGT_LOG ingLog
where BUCK_SLIP_XML is not null and ingt_date between to_date(:fromDate, 'MM/DD/YYYY HH24:MI')
and to_date(:toDate,'MM/DD/YYYY HH24:MI' )
and eqmt_id in (select eqmt_id from tos_eqmt
where eqmt_init = :eqmtInit and eqmt_nbr = :eqmtNbr
and orig_loca_id in (select loca_id from tos_loca where altn_src_sys_stn_id = :circ7 ))
and SCAC = :scac
and STCC = :stcc
and SHPR_NAME = :shprName
and CNSE_NAME = :cnseName
and driv_id in (select driv_id from tos_driv where lcns = :lcns )
and driv_id in (select driv_id from tos_driv where sabv = :sabv )
and ingt_stat_ind = :ingtStatInd
and BUCK_SLIP_XML like :inspectedBy
ORDER BY INGT_DATE

Slightly off-topic but what do you think this does :
XMLSerialize(DOCUMENT XMLType(ingLog.BUCK_SLIP_XML) AS CLOB) BUCK_SLIP_XML?

All dates are not recorded

Similar Messages

Maybe you are looking for