All Day events in Calenday spans two days

I mentioned this earlier, but thought I'd repost it into it's own discussion.
I've noticed that most (all?) of my all day events show up just fine in iCal (for a single day), but after syncing to my iPod - the iPod shows these all day events spanning over to the following day.
I just did a fresh iPod restore the other day so even if that did fix it - it was very very temporary.
And yes - at the time I checked that option to over write the data on the iPod.

No time zone issue here either. Strange. Just one of those things we will never know...
My lame fix?
List the event I want for "all day" at 3:00am. Then later, when I feel like it, go to iCal and change them to All Day. Course, that only works if you never move it in Outlook again (for example, it I move the all day event from Thursday to Friday it will once again, become a two day event in the iPhone).
Maybe someone at Apple could just fix this during a lunch break...I will even pay for the lunch!

Similar Messages

  • All Day Events on Mac are two days on Iphone

    I know this issue has been brought up, but I have yet to find a solution. It seems it doesn't happen to enough people for Apple to address.
    Has anyone found and answer to this?

    No time zone issue here either. Strange. Just one of those things we will never know...
    My lame fix?
    List the event I want for "all day" at 3:00am. Then later, when I feel like it, go to iCal and change them to All Day. Course, that only works if you never move it in Outlook again (for example, it I move the all day event from Thursday to Friday it will once again, become a two day event in the iPhone).
    Maybe someone at Apple could just fix this during a lunch break...I will even pay for the lunch!

  • New all day entry in iCal spans 2 days on iPhone and iPad

    I wondered if someone could help me with this. Just recently when I enter a new item into iCal and wait a second it syncs and is fine on the iPhone and iPad and on iCloud online as a timed event.  When I then enter the details and select all day event it spans that day and the following day only on the iPhone and iPad not iCloud nor on my Macbook Retina.
    I have read about adjusting Time Zone support and have tried numerous settings on all devices including setting all the same and also 'Off' and different combinations of these and makes no change at all.
    I hope somebody can help me with this.
    Thanks in advance.
    Mike.

    Hello
    i created a smiliar thread on ehre yesterday and then found this post this morning.
    I synch via iTunes and all calendar event that are one day are being shown as two days events, noticed this before and just presumed that i had entered them incorrectly it was just the other day that i was scanning through to check on birthdays next month that i noticed them all covering two days. Last night i was changing synch settings an cant get them to sync correctly. I use entourgae for mail,address book and calendar and liek it all being on one so dont really want to revert mal to mail ical and address book. The event show fine in entourage and also in ical where highlighted as entourage dates.
    so gonna keep an eye on thi, hope it can be resolved soon

  • All-day events in iCal become 2-day events on iPhone

    Since I updated to 1.1.2, all my all-day events in iCal become 2-day events on the iPhone. Has anyone else had this problem? I can reset the end time on the iPhone, but I have lots of recurring monthly events and it would take forever to do this manually.

    I have the very same issue. I solved it once somehow but now it's back. I use Plaxo to sync between Outlook-iCal-iPhone and maybe that somehow has confused the phone. Let me know if you find any solutions. I will do the same.

  • All day events spanning two days

    I have a Nokia 6300 that I'm syncing with iCal but when I have an all day event in iCal it comes in as a timed event on the phone that runs from 13:00 on one day and then ends 13:00 the following day. Whereas if I add an all day event on the phone then it transfers into iCal perfectly ok. Any ideas?

    In the UK we're actually at GMT +1 hour to account for BST.
    http://www.timeanddate.com/worldclock/city.html?n=136
    Try setting your phone to that instead and see what happens.

  • "All-day" events in iCal appear one day early in week-view on iPad

    Just got an iPad and synced with iCal. I noticed that "all day" events appear correctly in day-view and month-view, but in week-view, they are shifted one day earlier. But if I choose to edit such an event, the information is still correct, e.g. an all-day event for Monday, May 31 and Tuesday, June 1, has that information, and it appears on Monday and Tuesday in day- and month-view, but in week-view, it has "slid left" such that it appears on Sunday and Monday. Anyone else seeing this? Any solutions?

    I have the same issue on all day events synced from Exchange. The items look fine in the day or month view.

  • Some all day events don't show in day view

    We are using Leopard server to host iCal with various machines running 10.5.8 Leopard and 10.6.7 Snow Leopard. We have 16 calendars we share under Delegates. Some calendars (on Leo & SL clients) are missing a specific "all day" event in day view but they are there in week and month view. The missing item is the same one across all machines. I've checked delegations but that does not fix it. I'm still doing a survey, but most of the machines missing the events are running SL. Anyone having this experience? Thanks

    I take it then you don't have a memory problem. Just to clarify, your events on the calendar are fine, it's just the display
    on the home screen where they disappear?
    Have you tried a battery pull to reset all options?  Pill the battery from the phone while it is ON, leave it out for about a
    minute and replace. Leave the system completly reboot 1-2 minutes and see if the problem continues. This is a common fix on these forums.
    Let us know!
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • All Day events from Exchange are a day out

    There are a few posts similar out there but I haven't been able to find a solution for this one.
    If I create an "all day" appointment in Outlook and sync it to my iPhone via exchange it shows up a day early on the iPhone, but fine in Outlook. Now here's the interesting bit, if I modify the appointment on the iPhone and sync it back, its fine, the dates match.
    I've checked the time zones and disabled time zone support, its still an issue (plus these items are a whole day out not just 13 hours so I don't think that is the issue). It sounds similar to the birthday issue here http://support.apple.com/kb/TS2456 but iTunes isn't involved so can't really do that fix.
    Does anyone have any other suggestions? I'm getting a little sick of turning up to meetings a day early.
    Thanks,
    Cameron

    I was wrong... defining a time zone in Outlook doesn't seem to change it after all.
    It's a little odd because if I create an all day event and load the time zone options they are greyed out, they only become active if its not an all day event. If I save the event with the time zones showing (but greyed out) when I reopen the event the time zones are gone. So maybe nothing is actually being saved???
    Its still just a theory but I suspect that saving of time zone information might be part of the problem, now I just have to find a way to prove it.

  • Entourage 2008 full day events displayed on the wrong day

    Hi
    I am using Entourage 2008 with an exchange server and a blackberry. As well I have a Windows notebook with MS Outlook.
    My problem is: If I setup a full day event it will be displayed correct on my outlook and my blackberry BUT entourage will show this event on the wrong day (24 hours to early!?!)
    Does anybody know what I am doing wrong?
    My timezone is set correct (in Entourage and on my iMac)?!?!
    Thanks for help....

    I think I received a reply
    Please check
    This is an Exchange issue. See this article for details. It also applies to
    Exchange 2007 although the article talks about 2003.
    http://support.microsoft.com/kb/925376
    Thanks
    Mu
    Thanks to Mu for the help. I will get in contact with my provider if there is a chance to install the hotfix.

  • Calendar events are showing up two days early on my iPhone, how do I make them show up on the right day?

    Notifications are showing in my notification centre that birthdays are 1 day before they actually occur. Is this a general fault or can it be fixed?
    Also, the birthdays have been entered as part of the contact information, if this has any bearing on the answer.

    Depends on your setting.  Go to Settings>Mail,Contacts,Calendars...scroll down to the Calendars section, tap Default Alert Times>Birthdays, set as desired.

  • Fucntion to Calculate business days (exclude weekends & holidays) between two days

    Hello,
    I need to be able to calculate business days between two dates excluding weekends and holidays. I do have a date dimension and also flags which denote weekday, holiday. Would really appreciate help in building a udf for the business days calculation.
    Thanks,

    Hi, Please take a look and tweak accordingly. Best of luck.
    --Assuming data dimension table something like the following
    --tblDateDim (DT date primary key,
    flagHoliday bit,
    flagWeekday bit
    CREATE FUNCTION fnBusinessDays (
    @StartDate DATE,
    @EndDate DATE
    RETURNS INT
    AS
    BEGIN
    DECLARE @Days INT ;
    SELECT @Days = count(*)
    FROM tblDateDim --// date dimension
    WHERE
    ( DT BETWEEN @StartDate AND @EndDate) --// dt is date column in the table.
    AND --// also flags which denote weekday, holiday
    flagHoliday = 0 --// flagHoliday= 1--Holiday;= 0 --workingday/businessday
    AND
    flagWeekday = 1 --// FlagWeekday = 1--businessday ; =0 --weekend (Saturday and Sunday)
    RETURN (@Days)
    END
    GO

  • My 30 day trial keeps running out two days after signing up for it, please help!!

    PLease help

    Glen.savoie.junior please see Adobe trial software expired early - http://helpx.adobe.com/x-productkb/global/trial-software-expired-early.html for possible reasons your trial is expiring.  If you wish to evaluate the Adobe software I would recommend installing it on another computer.

  • Duplicate all-day events on calendar

    I noticed that on my iPod Touch calendar, all of my all-day events go on for two days. For example, a person's birthday is showing up as going from Dec. 1-Dec. 2. On my computer's iCal, all of my all-day events look normal. What could be causing this?

    I've had this happen to some of my all day events also. Somehow the events end up going from 11pm to 11pm (instead of 12am to 12am) and thus they span two days.
    I'm still not entirely sure what has caused this. I've also had some of these events (these are mostly recurring events, like birthdays) that have ended up on a different day entirely - June 6 instead of October 31, for instance. In those cases the Recurring Event props got changed from a specific date to 'third Wednesday' or some such.
    I have had to edit manually in Outlook -- if they say 11pm to 11pm, change it to 12am instead. And check the recurring props to be sure they are correct.
    You might also want to check your location settings. I have sort of wondered if this has to do with location as I had it set to Indianapolis (which only started observing DST last year - maybe that isn't factored into the software yet?) and wondered if that is what messed things up, since all day events did shift by 1 hour. I have location set to New York now but can't prove that fixed anything -- I found a few more events messed up today, but then just now remembered to check World Clock, and it was still set to Indy. <shrug>
    Judy

  • A one day entry on iPhone calendar shows as two days on iPad?!

    I know you're thinking this is probably something to do with timezones differences between the iPhone and the iPad?
    Each year I put the F1 grand prix races in my calendar as a one-day event on the Sunday they take place. On Sunday 27th March 2011 is the Australian grand prix.
    On my iPhone (I'm in the UK and running the latest version on an iPhone 4 etc.) it shows as a one-day event but on my iPad it stradles two-days! When I go to click EDIT on the iPhone entry, despite showing as a Sunday entry only, it shows that it starts on Sunday 27th March and finished on Monday 28th March!
    I spent a couple of hours looking at this. No other grand prix date has this discrepancy between the iPad and the iPhone calendars (that are sync'd with MobileMe calendar). It's just this one date.
    I even had a friend add an event on the same date and it also suggested it was a one day event but when you edit it then it shows it's a two day event.
    And then the only explanation dawned on me. It wasn't time zone setting differences as that would affect all the entries like that the whole year.
    27th March is the date the clocks go forward in the UK for British Summer Time!
    Is it a bug though? Why does the iPhone show it as one day but the iPad show it as two?
    What is it with Apple and calendars and alarms?! And don't start me on the MobileMe calendar and Outlook integration. It's rubbish.

    Hi Boneart - I feel for you. 
    I too have the same issue (Feb 2014) which I have just discovered today as I am not a strong user of all-day events, until today when I tried to schedule annual holidays in my diary.  I can confirm the EXACT SAME issues that you have described with all-day events displacing 24 hrs EARLY for sync Outlook to iOS calendar, and all-day events displaced 24hrs LATE for sync iOS calendar to Outlook.  I also confirm that the issue does not exist for specified time appointments, as you also found. 
    I note from several other discussion threads that Apple have previously focussed on an issue of all-day events syncing to span 2-days; that is not yet apparent in my situation  BUT I will be watching with interest whether a subsequent synchronisation causes the displaced dates to also synchronise back providing the same event apparently spanning 2 days but ACTUALLY existing as two events with identical properties on successive days.
    One oddity is that I also operate in the NZ time zone; I wonder if that is significant???
    For a brief period I trialled iCloud with a thrid-party patch to resolve the native iCloud issue of not providing 2-way synch with Outlook.  That worked beautifully ... until Apple provided an update to the iCloud interface which destroyed all functionality for me.  I'm back to hard-wire sync via USB wire again.  Very frustrating!!
    Finally it is sad that Apple has no interest in these issues.  It strikes me that as soon as there is a non-Apple platform involved they blame the other system and wash their hands of it.
    iPhone 4; iOS 7.0.6 (latest); Outlook 2007 & iTunes 11.1.5.5 on Win7Pro 64x v6.1

  • Outlook all day events bug

    Some of my all-day events (like birthdays) synced over but would not show up on list view if there were other all-day events on the same day. When I edited the entry, I noticed the schedule was, on a Feb 12 for example, from Feb 12 to Feb 11 (yes, backwards). I changed the 11 to 12, made sure the all-day switch was on, and voila! My all-day even co-existed nicely with other all-day events.
    It only did that in 3-4 of 15 all-day events. Just in case anyone runs into this.

    Ditto - another one for the pile. Using Exchange Server 2007 and iPhone 4.1.
    Additionally, if I create an all-day appointment on the iPhone that spans two days (typically Sat & Sun) and invite another party, when the invitation is accepted the appointment gets screwed up on the iPhone, depending on which view you're looking at. Here's the use case:
    1) Create all-day event starting 27 Nov ending 28 Nov, invite somebody.
    2) Invite is accepted, look at appointment on iPhone.
    Month view: 27 Nov event shows as 00:00, 28 Nov is "all-day". Nothing on 29 Nov.
    Day view: 27 & 28 Nov blocked out fully
    List view: Event only shows as 00:00 on 27 Nov, nothing on 28 or 29.
    Lastly, when you open the appointment and look at the detail, you see that it now runs from 00:00 on 27 Nov to 00:00 on 29 Nov. For a two day all-day event you created on the same device minutes earlier.
    Come on Apple! I switched to the iPhone from Windows Mobile because of your slick UI and great choice of apps, and even forgave you the lack of task and category support. But if you can't even get my appointments right I'll think twice before placing my order for that MacBook Pro I've been ******* after.
    M.

Maybe you are looking for

  • Please Need help for change chart automaticly in report builder

    Hello, I have a problem under transfer Builder oracle 6i and I wish that you help me. I developed a report which contains a Camembert cheese, The parameters to enter are the date of edition and the code of the customer. For every customer that works

  • Determining the ODBC data source from a Subreport - VB6, CR8.5 OCX

    I am using Crystal 8.5 OCX and VB6 to run some reports.  Users run reports on different databases with the same table structures.  All run from ODBC sources that change in name also.  The reports are just rpt files on the hard drive that are run when

  • IPhone 5 won't reboot - Error Code 3014 !!

    My iphone 5, running iOS 6.1.1 , has been jailbroken for about a week now, when all of a sudden it froze today. It shut off and restarted, and has been stuck on the apple bootlogo for hours. I tried to restore in recovery mode, and got error 3014, i

  • Email Search Blackberry 10

    We seem to be having issues searching Email sub-folders on Blackberry 10 devices. The strange thing is the search function was working and now has stopped for 4 of our 94 Blackberry 10 (Q10, Z10 & Z30) device users. In the inbox our Enterprise email

  • Can't resolve broken links

    Hello everyone! I am hoping that someone will be able to assist me. I am working in RH 9 and i have received the following error when i select to resolve my broken links. "You cannot resore a topic that would be outside the project folder. Please mak