All default routing value has to be changed, while changed the work center in production order

Dear friends,
our client they want to change the work center in production order.according to production version work center also they are changed.so while change the WC,all the default value has be changed as per routing what we maintained in routing.At present we have to enter the manually change the W.C as well as set up time and operation time enter manually.Any other option to do the automatically capture value from routing while change in Work center in production order.pl help me on this.
Thanks&Regards
Sabhapathy R

Hi Rahul,
Thanks for reply. I am maintained in diff value maintained routing , Ex :First routing i have work center 'X' value maintained as a setup time in 15 Min's and operation time 10 Min's
second work center 'Y' I have maintained as set up time 10 Min's and operation time 30 Min's,
Now I want to change the work center in production order as a 'Y' so whatever value maintained in routing , it has to be changed automatically (10 min's and 30 Min's), but system will not change only old value only picked (15Min's AND 10 Min's).
Now I think you get to know what the client requirement, kindly do the need full.
Regards,
Sabhapathy R

Similar Messages

Change Work Center during production order confirmation

Dear All,
I must to modeling this situation:
I created an production order. In routing I used an work center A.
After I confirmed a half of quantity, the work center A was damaged and I must to change it, with the work center B.
The system allow this change, but when I checked the costing, the situation isn't real. The system counted the costs just for the work center A, and no for work center B.
My question is: it's possible to change the work center, during production order confirmation and the costs updated with new cost?
Thank you for your answer!
Regards,
Marian

once a Order is released, the Process order detaisl for that order is frozen.
however if you want to do it, change the order status to CRTD after reversing the Movements done.
Do READ MAster data , this will copy the new Work center , redo the previously done Moevements.
if the change is long term.
or
Just manually add the new work center and do the processing. if the change is temporary.

Mass change of work center in production order

Dear All,
Is it possible to mass change work center in production order, i.e. i have around 100 production order of which i have to change the work ceter assigned in particular operation .
Thanks and regards
Manish

Hi Manish,
If you have not posted any activity or goods to the production order, then in header click on Functions -> Read PP Master Data.
The order will now read the routing with the new work centers, provided the same has been changed.
If you have posted some activities or goods movement done, then its a manual process.
Hope the above answers your query.
Regards,
Vivek
Added
If in case you have posted some goods or confirmed some activity, check if you can reverse the same, re-read the routing & then post back the goods.
Edited by: Vivek on Feb 24, 2009 12:22 PM

Change history of work center in Prodn Order

Hi All,
We currently are changing the work center in prodn order via an ABAP program number of times based on various conditions. We would like to know the change history for the work center in prodn order. Is there any <b>transaction or report or function module </b> that we can run for a given prodn order to know these changes. This change info is not captured in AUFK or AFPO or AFKO or logs for Prodn Order.
We have not activated audit trail for this. Please can anyone suggest a soln for this.
Thanks

Hi Bala,
AFRV table contains Confirmation pool information. But I am looking for change history for the work center in prodn order. Like after creating the prodn order u changed the work center and then again after release of prodn order u changed it to some other work center (for some particular business reason). I would like to see all this change history.
Swapnil

User exit to populate profit center in production order change (CO02)

Hello,
The requirement is to populate the profit center in production order change (Tcode CO02). I know the user exit that can populate profitcenter in CO01 but it's not called in CO02. Ther other user exits that I found are for checking but not for changing
Is there a user exit /BADI that can acheive this requirement?
Thanks a lot for your advise.
Joe

Hi,
Use the user exit PPCO0007 ,function module EXIT_SAPLCOZV_001
HEADER_EXP-PRCTR
Thanks,
Shailaja Ainala.

Change Profit center in production order

Hi
In production order , profit center is taken from material master, we need a solution to fetch the profit center from cost center instead of material master, assigned in work center, in production order
selection of production line from production version assigned to production order
Is there any std functionality or enhancements possible ?
now I am working with this SAP note
Note 150959 - Profit center is incorrect in production order
Regards
Devakumar
Edited by: Devakumar on Feb 22, 2010 11:27 AM

Then Go to OBA5 enter the KO Application area
Add the 367 message and your user iD enter warning in online and Batch,
After that You can able to Change the profit center in Order with warning message in Order

How to change the status of a production order

Dear All,
May i know how to change the status of a production order.I want to de-active the status like OPGN (Operation generated).This status is updated as there was no routing assigned to that particular production order during its creation
Thanks and Regards,
Varun Siddharth

Dear,
When you create a production order, an operation created by the system is generated automatically if no routing is used for the creation. As a result the order header receives the status HOGAN; the operation created automatically also has this status.
If you delete the operation created automatically and then do not have the status HOGAN.
To avoid this maintain the Routing for the material or delete the setting of default operation from OPJG.
Regards,
R.Brahmankar

InfoPath form, rich text fields, "There was a form postback error" InvalidOperationException, There has been an error while processing the form

Using InfoPath 2013 browser enabled form.
I am getting the above error on ALL Infopath Designed Rich Text fields, where the "Cannot be blank" attribute is set.
To reproduce it, I create a custom list and custom list form with InfoPath 2013. I add 2 Rich Text fields and enable "cannot be blank". To raise the error, I put some data in the RT field. Skip to another field (so focus is changed and a postback
occurs), then back to original field to delete the contents (to raise the validation).
I originally thought it was associated with the HTMLCHKR.DLL not being registered (and I have re-registered it just in case), but the exception I get from the ULS logs reads (it is from a list AFTER I have re-registered the DLL):
There was a form postback error. (User: 0#.w|myDomain\jc, Form Name: Template, IP: , Request: h t t p ://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/Item/newifs.aspx?List=2212ff41-77b4-445b-931b-d7e538c9da91&Source=h t t p://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/AllItems.aspx&RootFolder=&Web=3db49106-bdca-47bb-b4cd-a549d2d86aa7,
Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2015-01-16T21:51:48:853Z, Type: InvalidOperationException, Exception Message: No content generated as the result of the operation.) 8cc5e09c-3665-903b-575a-faaac506c40a
I noticed that errors associated with the HTMLCHKR.DLL not being registered would have some sort of COM exception (example: TYPE_E_LIBNOTREGISTERED or REGDB_E_CLASSNOTREG)
I also should mention that this problem started happening about 3 weeks ago. We have extended the web application to handle HTTPS on the intranet zone (we had a reverse proxy project that did not eventuate) - would that cause something? How can I do further
checking?

Hi,
I have done a test in my SharePoint, and I met the same issue with you.
I created a custom list and custom list form with InfoPath 2013. I added 2 Rich Text fields and enabled "cannot be blank". I put some content in the RT field, then delete the contents, I got the error message:"there has been an
error while processing the form."
Here is a similar post said that executing the command: regsvr32 "C:\Program Files\Common Files\Microsoft Shared\
OFFICE14\htmlchkr.dll" will solve the issue.
https://social.msdn.microsoft.com/Forums/en-US/eb2e0f6e-c8e4-4e92-ac5e-a09d72759eda/rich-text-field-error-in-webform?forum=sharepointcustomizationprevious
But I just disabled "cannot be blank", and it solved the issue.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Change the Profit Center in Sales Order line item's Account assignment tab

Hi Gurus,
I need to change the Profit Center at Sales order Line item in Account Assignment Tab. Currently The Profit center is coming from Material Master for the Line Item's Material as default but I have to change / overwrite that.
Can any body provide me how can i achive that means
Any User exits, substitution or any thing ?
I tried MV45AFZZ but i am not able to find out the right place where I can change COBL-PRCTR.
Sony

Hi
There is perform which moves the values to VBAP field.
This PRCTR field is stored in VBAP (i.e., SO line item table)
USEREXIT_MOVE_FIELD_TO_VBAP
Hope it works.
VVR

Error: var g_objCurrentFormData_Error : There has been an error while processing the form

Hi,.
I have a InfoPath 2010 form which was published to SharePoint 2010. I migrated the content db to SQL Server 2012 and I have converted the Sharepoint 2010 (windows based) to the SharePoint 2013 claims based site. I have not fully upgraded the site to
2013 version (Version upgrade to SP 2013) is not done..
In the InfoPath 2010 form, which is available in SP 2013. I have a button and on click of it, i have the below code:
XPathNavigator domNav = MainDataSource.CreateNavigator();
XPathNavigator fldUserurl = domNav.SelectSingleNode("/my:myFields/my:TaskUrl", this.NamespaceManager);
if (!string.IsNullOrEmpty(fldUserurl.Value))
string urlToDecode = HttpUtility.UrlDecode(fldUserurl .Value);
HttpContext.Current.Response.Write("<script type='text/javascript'>window.open('" + urlToDecode + "','_self','left=20,top=20,width=500,height=500,toolbar=1,resizable=0');</script>");
HttpContext.Current.Response.Flush();
HttpContext.Current.Response.End();
The above code works fine in SharePoint 2010, however after moving the Site to SP 2013 Claims mode, I am getting the error as
"var g_objCurrentFormData_Error = [[[12,"There has been an error while processing the form.","","","guid"]],[],0,"","",1033,"","",["0","","","","","",0,0,"",0,false],"","0",false,"",0,"","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication","ltr","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication",6.35202885373882E+17"
In the SP Logs, i found the below:
Unhandled exception processing request for PostbackPage Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException: Exception of type 'Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException' was thrown.
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentFormId()
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentContext()
How to fix this?
Thanks

Hi Venkatzeus,
please let us know your sharepoint 2013 latest cumulative update, if possible please make sure it is March 2013 update or above.
as i know, between 2010 infopath and 2013 there are difference, perhaps if you can debug your form it may help.
most probably there are environment settings difference between 2010 sharepoint and 2013 sharepoint. such as the data connection size/length, that causing it failed, or the form data is NULL.
http://infopathdebugger.codeplex.com/
http://www.infopathdev.com/forums/t/26330.aspx
http://social.technet.microsoft.com/Forums/en-US/5c9d2fce-0fd8-439c-a636-bf856eb76e15/how-to-retrieve-term-store-management-values?forum=sharepointgeneralprevious
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

IW41: automatic update of activity type when changing the work center?

Hello colleagues,
when doing a time confirmation with IW41, we have following problem:
In the PM order the operations are assigned to a neutral executing work center, as it not known which individual technician is completing the operation later on.
Now when the individual technician is entering the time confirmation with IW41, system is proposing the work center indicated in the operation from the PM order, then technician is overwriting the work center proposal with his own individual work center ID (and pressing Enter), but the activity type is not getting updated automatically. So the technician must jump to field "activity type" and choose the correct activity type.
Is there any solution (hopefully with user exits!) to have the field "activity type" automatically updated with the one indicated in the work center, which was entered manually?
Thanks for your ideas!
Regards,
Patrick

Hi Maheswaran,
yes, as usual all PM work centers have only 1 activity type assigned in the costing tab.
We also checked the settings of the activity type (KL03), but we just found one difference: the price indicator was set on 3 "Determined manually" - we've changed to 1 "Plan price, automatically based on activity" (..same setting as for the act. type of the work center with working update of act.type).
We tested already all possible constellations and scenarios, but we have not found any good reason for the behaviour.
Thanks for your efforts so far!
Patrick

Can the case be changed while uploading the data or after uploading ????

hi all ,
can u pls help me ??? can the case of the data in a itab be changed while running the program? the data is uploaded to an internal table and then based on loop at that itab the conditions will evaluate to give the result.... but the problem is like wen the data is given in small letters the worste(last) condition is executing even the data satisfies the condtion which is not supposed to happen. this is due to case sensitive problem ...can u pls help me ....can the case be changed while uploading the data r after uploading ????

this is the itab declaration ..
data: begin of it_input occurs 0 ,
       tra          like tstc-tcode,
     end of it_input.
and then from the uploaded data the prog should check wheather it is having any userexits or not ...
here comes the code...
sort it_input by tra.
delete adjacent duplicates from it_input .
loop at it_input.
           it_itab-sno = sy-tabix.
select single * from tstc where tcode eq it_input-tra.
if sy-subrc eq 0.
    select single devclass from tadir into v_devclass
             where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
         if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
         move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
       if sy-subrc = 0.
        select single * from tstct where sprsl eq sy-langu and
                                        tcode eq it_input-tra.
                  if not jtab[] is initial.
           loop at jtab.
                select single modtext from modsapt into str
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                it_itab-tra        = it_input-tra.
                it_itab-i_obj_name = jtab-obj_name.
                it_itab-i_modtext = str.
                append it_itab.
                str = ''.
           endloop.
          endif.
        else.
                it_itab-tra        = it_input-tra .
                it_itab-i_obj_name = ' '.
                it_itab-i_modtext = 'No user Exit exists'.
                 append it_itab.
        endif.
      else.
                it_itab-tra        = it_input-tra .
                it_itab-i_obj_name = ' '.
                it_itab-i_modtext = 'Transaction Code Does Not Exist'.
                 append it_itab.
      endif.
endloop.

List of values apprear for email alert while scheduling the report

List of values apprear for email alert while scheduling the report

Hi,
Can you please expand on your issue?
Cheryl

How to change the Profit Center in Sales Order

Hi Gurus,
Previously they setted the profit center (YB999) in sales order, now i want to change the profit center and need to give the amount into this profit center 100500.
So, could you guide me how to change the profit center in sales order.
Thank you for your replies.....
Thanks & Regards,
Chandrababu.B
Edited by: Chandrababu Naidu on May 25, 2011 12:44 PM

Hi
If this SO is processed partially - i.e. transactions happened - You cant change it
You can use ABAP and change it in Debug mode, but not advisable... Better to short close the SO and open a new SO for Balance qty
br, Ajay M
Edited by: Ajay Maheshwari on May 25, 2011 5:10 PM

This computer has been locked. Please contact the support center at 866.769.4059 to unlock

Dear guys, Like this post subject, i dont know why laptop has been become like that."This computer has been locked. Please contact the support center at 866.769.4059 to unlock"The above message keep appear when I start the machine. I also try to contact to 866.769.4059, but the auto answer keep question me about somewhat token code, and i dont know what is that code. Please help me !Sorry for my poor english too !

Thank you! I've sent a message with AT&T Account Info, Device Unlock Request Number, IMEI, Device Model info and my contract info to @ATTMobilityCare.

All default routing value has to be changed, while changed the work center in production order

Similar Messages

Maybe you are looking for