"All Desktops" not staying after reboot

I have a few applications which I've set to show on all my desktops (iCal, 1Password, Communicator).
What I have noticed is that after reboot (with restore windows checked) that sometimes those applications do not show up anymore on all my desktops. If I check the setting I can see the option is still checked however. To "resolve" it I need to switch it to say "This Desktop" and then back to "All Desktops".
I'm working with 3 displays: external display (VGA through Thunderbolt) which is the primary, my laptop screen is a secondary monitor and I also have a USB display through DisplayLink as a third monitor. I always put these applications on my secondary monitor (laptop screen).
Anyone else seen this issue? It might be an issue with this in combination with multiple displays.
Thanks.

I can confirm that this behavior is not caused by multiple displays; as I have the same problem using only one monitor.
I consistenly set my Terminal.app settings to show on all desktops, but once the system is rebooted it reverts to displaying on Desktop 1. One has to change it from ‘‘This Desktop’’ to ‘‘All Desktops’’ to get the functionality back.
This is a bug that should be easy for Apple to fix. It would also be nice to have all open applications in a session remember which desktop it was associated with previously, as I have a number of things open which I arrange into different desktops (‘‘spaces’’)--as I'm sure many other users of OS X do as well.
--Martin

Similar Messages

Flash doesn't work - at all. Not even after reboot.

Flash plugin crashes the Plugin-container.exe process, causing Firefox to "hang." Flash and Firefox are up-to-date (as of minutes ago) and hardware acceleration has been enabled/disabled to no avail. There are multiple instances of plugin-container (all of which must be force-quit) and even after reloading a page flash won't work, instead freezing up firefox.
What can I do next to figure out why this is happening and stop it?

That was the first thing I did, but it seems a new update has been released since I first posted. Thank you.

Why will my Mac 8,1 intel desktop not stay in sleep mode for more than 5 seconds?

Why will my Mac 8,1 intel desktop not stay in sleep mode for more than 5 seconds?
Have tried repeatedly and end up shutting down instead of "sleeping:.

Hello, most usually it's some USB device causing that, but...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed. Or an errant process eating up RAM.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Could Calendar services not available after reboot be LDAP problem?

I followed this installation guide:
https://wikis.oracle.com/display/CommSuite7U2/Communications+Suite+on+a+Single+Host+%28Linux%29#CommunicationsSuiteonaSingleHost%28Linux%29-InstallingCommunicationsSuite7Update2Software
I have successfully installed and set up the Oracle UCS Sun7 update 2 server. Calendar works ( if I don't reboot the server ).
However, when I reboot the server, Calendar service is unavailable.
Important information for when I installed Oracle UCS sun 7 update 2 by following the installation guide:
I have noticed when browsing through the folders, that there was already a 'dsee6' folder for the Oracle Linux I started from. Following the example installation for the Oracle Linux 5 with GlassFish install, I was instructed to download a new Directory Server. Following the instructions on page 7 of the install guide listed above, I made another folder 'dsee7'. I am wondering if I should never have downloaded this new Directory Server as instructed on page 6 "Get the Software". The install guide actually does not mention where to get the Directory Server from, so I just went to the edelivery site and figured it out myself. Anyways, under the "Installing and Configuring Directory Server" section, #3, I was instructed to "mv dsee7 /opt/sun/directory". In this folder, /opt/sun/directory/bin, there will be "./dsadmin" utility that can be ran. This is used to do many things with the Directory Server including starting it. Here is how I started it:
cd /opt/sun/directory/bin
./dsadm create /var/opt/sun/directory/dsins1
./dsconf create-suffix "0=isp"
Also, I downloaded the Directory Server from edelivery - Oracle Directory Server Enterprise Edition 11gR1 Patch Set 1 for Linux x86-64
Then, I ended up running to get it set up:
./dsccsetup ads-create
./dsccsetup war-file-create
$ ./dsccsetup cacao-reg
./dsccsetup status
Then, it looked like the dcss agent is registered in cacao.
So, if we forward ahead to page 9 of the install guide, "Preparing the Directory", I ran this and prepared the directory. After I finished installation, I could restart the Directory Server with no problems, as long as I did not reboot the machine. I would restart the Directory Server like so:
cd /opt/sun/directory/bin
./dsadmin stop-domain domain1
./dsadmin start-domain domain1
However, if I rebooted the machine, I could still start and stop the Directory Server as noted. But, the Calendar Services were not available.
The only reason I wonder about this LDAP Server possibly being the cause of this is because I had at one point configured the services to start on boot. I followed these instructions:
https://wikis.oracle.com/display/CommSuite7U2/Start+and+Stop+Scripts+for+Communications+Suite+%28Linux%29
I am using a VMSphere client to host this set up. So, since that point of configuring the services to start up, I have rolled the snap shot back so that the services are no longer set up to start on boot. But, when they were, and I rebooted the machine, I could see ldap 389 errors all over the place. So, that lead me to roll my snap shot back in effort to try and fix the ldap errors. I no longer get LDAP errors since I rolled my snap shot back. But, like I said, I no longer have any of the services, including the LDAP, to start on boot as noted in the above link that instructs us how to do this.
After reboot, I run these commands to get the server up and running:
Start GlassFish server:
cd /opt/sun/SUNWappserver/bin
./startserv
Start web ( Messaging Server I think ):
cd /opt/sun/comms/messaging64/bin
./start-msg
Start LDAP ( Directory Server )
cd /opt/sun/directory/bin
./dsadm start /var/opt/sun/directory/dsins1
Start Mysql
cd/etc/init.d
./mysqld start
All of those commands complete without problem. I can log into the convergence web, I can hit the delegated administrator, I can log into the GlassFish admin console, and I can see my calendar folder when I hit it in the web ( http://myServer.com/davserver/dav/home/userName/calendar/ ).
So, in summary, I am wondering if anyone knows if this supposed second Directory Server is causing my problems since I started with Oracle Linux 5 and Oracle Linux 5 appeared to have the folder dsee6 already installed with it. Could this be why my calendar services are not starting after reboot but are working before reboot?
( Also, all of my posts keep getting deleted. Can someone please email me if someone from Oracle is deleting my posts and tell me why they are getting deleted? )
Edited by: ntfytim16 on Mar 5, 2012 7:41 AM
Some of my steps were out of order. Cleaned them up so it is easier to understand.

Here is my error0.log which is in the /var/opt/sun/comms/davserver/logs folder:
=========================
Last packet sent to the server was 0 ms ago.
SEVERE [2012-03-01T05:10:26.033-0500] <...DavServer.loadBackend> failed to instantiate or create backend com.sun.comms.davserver.backends.BackendException: Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
Last packet sent to the server was 0 ms ago.(OPERATION_NOT_SUPPORTED)
INFO [2012-03-01T05:10:26.033-0500] <...DavServer.loadBackend> Loading backend ischedulebackend with backendid ischedulebackend
INFO [2012-03-01T05:10:26.034-0500] <...DavServer.loadBackend> JDBC JNDI Name = jdbc/ischedulebackend
SEVERE [2012-03-01T05:10:26.177-0500] <...JdbcBackend.queryDatabaseType> Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
Last packet sent to the server was 0 ms ago.
SEVERE [2012-03-01T05:10:26.177-0500] <...DavServer.loadBackend> failed to instantiate or create backend com.sun.comms.davserver.backends.BackendException: Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
Last packet sent to the server was 0 ms ago.(OPERATION_NOT_SUPPORTED)
INFO [2012-03-01T05:10:26.209-0500] <...DavServer.loadBackends> iSchedule enabled
WARNING [2012-03-01T05:10:26.209-0500] <...DavServer.loadBackends> iSchedule URI is configured but can't find ischedule backend.
SEVERE [2012-03-01T05:10:29.567-0500] <...LDAPSingleHostPool.buildConnection> buildConnection: got LDAPException while connecting to Pool number:0. Host=myServer.com :netscape.ldap.LDAPException: failed to connect to server ldap://myServer.com:389 (91)
SEVERE [2012-03-01T05:10:29.568-0500] <...LDAPSingleHostPool.buildConnection> buildConnection: got LDAPException while connecting to Pool number:0. Host=myServer.com :netscape.ldap.LDAPException: failed to connect to server ldap://myServer.com:389 (91)
WARNING [2012-03-01T05:10:29.568-0500] <...LDAPFailoverPool.getConnection> Fatal Error: All LDAP servers are down.
======================
Does that look like an LDAP issue to you?
"Fatal Error: All LDAP servers are down."
Edited by: ntfytim16 on Mar 5, 2012 10:13 AM
Changed one server address

All my Notes disappeared after ICloud upgrade

All my Notes disappeared after ICloud upgrade. I cannot find them, nor a way to recover them from backups? Any ideas? This is a BIG hiccup!

I posted this on another discussion:
Similar problem: I was at a store today and went to my Notes on iPhone 3GS to look up information recorded there about medications for an aging parent. I am syncing through iCloud so the same notes are on my iPhone, iPad 1, and desktop Mac (in Mail). I opened one note, but it didn't have the information I needed, so I went back to the main Notes list and picked another of the dozen notes. I was scrolling down through that note and then suddenly....poof....the note was gone. ALL the notes were gone. The note pad said NO NOTES. ***???!!!!
They were gone from my iPad, too. The notes represent information gathered and organized from multiple years (with no problems until now). The notes are information I NEED. I created a test note, it showed up on my devices. Then I chose to delete it to see if a single key click could do that. The app requires a second click on a Delete Note button as confirmation. And there's no way to delete ALL notes while viewing a single note, deliberately OR accidentally.
Any suggestions about how to recover the notes lost today? Thanks in advance.

I have lost all my notes data after restore. Anyone know how to retrieve notes after restore?

I have lost all my notes data after restore. Anyone know how to retrieve notes after restore?
I havent' took any backup of my notes in icloud. The moment I enter the password after restore my notes will be empty. The only option to get notes back is that after restore skip entering icloud password. But any time I enter icloud password anywhere again my notes will be empty. I have huge data saved in my notes. Apple need to look into this issues very seriously. This is the 5th time I restoring my iphone today just to get my note back.

I have the issue with losing all my notes and I don't even know why. I can't remember changing any email account info. What happened to them?
Ipad 3rd io7
Please Help!
Thank you,
S.

Acfs not mounted after rebooting..

Hi,
I have create acfs filesystem . but that filesystem is not mounted after rebooting server? how to enable auto mount?
OS version : RHEL 5
Grid Version : 11.2.0.2
ASMCMD> volinfo -G ACFS_U06 ORAHOMEVG
Diskgroup Name: ACFS_U06
Volume Name: ORAHOMEVG
Volume Device: /dev/asm/orahomevg-92
State: ENABLED
Size (MB): 7168
Resize Unit (MB): 256
Redundancy: UNPROT
Stripe Columns: 4
Stripe Width (K): 128
Usage: ACFS
Mountpath: /u06/app/oracle/product/11.2.0.2
Thanks

Register the mount point with acfsutil utility.
oracle@rmdydbitdb1 $ acfsutil registry -h
Usage: acfsutil [-h] registry [-l]                     - Display registry contents
                -l <mountpoint>          - Display a specific mount point
                -l <device>              - Display a specific device
                -m <device>              - Display a specific mount point associated with a device
                -a [-f] [-o <opts>] [-n <nodes>] <device> <mountpoint> - Add a mount point
                -d [<mountpoint> | <device>] - Delete a mount point or a devicehttp://docs.oracle.com/cd/E11882_01/server.112/e18951/asmfs_util010.htm#CACGHBHI
Thanks
Kuljeet Pal Singh

How to fix "OS X Lion user's custom preferences are not retained after reboots"?

How to quickly fix "many of user's custom preferences from within OS X Lion 10.7.x and/or MtLion 10.8.x are not retained after Mac reboots and/or log-offs"?

If many of the user’s custom preferences from within OS X Lion 10.7.x and/or Mountain Lion 10.8.x are not retained on Mac after reboots and/or log-offs, then implement this following QUICK FIX procedure:
Login to user’s OS X login profile… access & select the Finder pull-down menu Go… next select Library (just user’s Library only available when holding-down the Option key here within OS X Lion + MtLion)… find-select-and move the Preferences folder out from the overall user’s Library to the user’s Desktop area for temporary safe keeping. Then log-off user and/or reboot Mac… log-in as user, and reset all user’s custom preferences (System Preferences, Dock icons, etc. [OS X system now recreating all user’s login profile preferences]) according to their previous Desktop setup. Finally reboot after making all new user preferences setting changes… log-in again as user, and check to ensure that all user custom preferences now stays retained. If all OK, then you may move the corrupted Preferences folder from the user’s Desktop area to the Trash for final deletion.
*NOTE: Is this above-written QUICK FIX completely acceptable to Apple's OS X Lion + MtLion troubleshooting standards? So far this solution appears to have fixed a recent iMac user's issues with custom preferences.

PC Suite 6.86.9.3 does not start after reboot

Hi!
I have some strange problems with the PC Suite. After the first install everything is working well but after a reboot the PC suite is not starting after double click on the desktop icon.
But i can install tools on the phone or start some of the suite tools. Only the PC Suit does not run.
The repair function of the installer does not bring any results. The only way ist to deinstall the suit and all drivers and to clear all remainig nokia registry entries. After that I can install the suite again and it will run again... until I reboot the system. And so on, and so on...
Does any one have an idea how to solve my problem?
Thanks
Michael

Actually it does not work on one Windows XP SP3 computer, but it does work on another Windows XP SP3 computer.
Probably this is a .NET application, as I have encountered several .NET applications that do NOT work on some specific computers.

Netboot user profiles are not persitent after reboot

Hello,
we are migrated our environment to Mountain Lion Server and Netboot Clients also with Mountain Lion. User profiles are located on the Server.
If Users change some profile settings like default browser or standart application for opening files, these settings are persistent until the user reboot the machine. After that, all settings reverted to default. User permissions looks like it should. Also if some settings would be changed inside Safari proberties like search machine or startup page, these settings will be stay after the reboot. :-( Some other not.
Any sugestions where i have to look?
Thanks and regards.
Joris

Hey Brian,
we use Netboot ... yes but every User which is log in to the netboot client get an own Network Home Directory mapped.
I know that changes on the OS not stay persistant inside the Netboot OS. But changes on the UserProfiles, like default Browser or somthing else, are also reseted after the reboot. I think they should saved in the UserProfiles and stay persistant if the user log in again after the reboot?
Regards

[SOLVED] Printer not working after reboots

I recently built my won desktop running Arch. Every thing works fine except for printer. Printer is Brother MFC-290c. It is a Multinational printer (i.e Scanner and printer together).
Once I configure the printer it works fine until the next reboot. After reboot printer user/group changes to root:scanner.
# ls -l /dev/bus/usb/005/002
crw-rw-r-- 1 root scanner 189, 513 Jun 9 07:17 /dev/bus/usb/005/002
So after every reboot I need to do "lsusb" to look for Bus and Device ID for the printer and change its owner/group to root:lp. After this step is performed Printer works fine until next reboot.
$ lsusb
Bus 005 Device 002: ID 04f9:01fd Brother Industries, Ltd
Bus 005 Device 004: ID 045e:00f9 Microsoft Corp. Wireless Desktop Receiver 3.1
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
How can I make sure that whenever I plugin this printer its user and group is root:lp instead of root:scanner
Last edited by nik (2013-06-10 00:48:50)

SOLVED :D:D:D
Thanks Strike0. That was a push in right direction. After reading your reply, I decided to take a look at my udev rules. There was not one for my printer but there was one for the Scanner. I do not yet know how to read udev file, but sure enough it looked as if it was causing all problems . Renamed the rules file for the scanner to see if everything works fine in its absence. Rebooted, Printer and scanner are both working fine now.

Firefox will not start, after reboot.

For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
== This happened ==
A few times a week
== Around the time 3.5 was released

Hello Tom.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

Tap to click setting in system preferences not persisting after reboot!

Hi,
This is the 2nd time this has happened.. I shut down my system, and boot it up later, and when I go to tap, nothing happens. I go into to system prefs > trackpad, and see that my tap to click & dragging options are unchecked......
Why is it not remembering those settings?
-patrick

I also have this behavior. It seems all trackpad preferences fail to persist after reboot and logout/login. I also disable Pinch Open & Close and Rotate settings and those also revert.

CompressorTranscoderX (Not Responding) After Reboot

Hmmm... I'm not sure what to make of this:
After installing FCS 3 (FCP 7, etc.), and a reboot, I see a dozen or so Compressor-related processes, even though I haven't used Compressor since that reboot. Many of them are "CompressorTranscoderX" and they are all labeled "(Not Responding)."
I had been doing some Compressor work on my cluster (all on my 8-processor machine), but that was before the reboot.
Should I "quit" those processes?

Not sure exactly why this happens... but I noticed this with any installation of FCS2 on 10.5, never tried FCS3 though, but it sounds like the same thing.
Even though they say not responding, I haven't noticed this causing any problems. I know it's weird to see these processes red, but it seemed to be the norm in 10.5.
If you can encode normally and without issues, I wouldnt worry about it.
I have noticed in 10.6 this issue doesn't exist. None of the processes are red. Why, I have no idea.

ASM not mounting after reboot of external storage

I have a setup with 4 internal drives and 12 external drives(external storage, multipath). The diskgroup was orignally created on the 4 internal drives and then the disk group altered to add the external storage. Everything was fine until the external storage array got powered down. Then we rebooted both boxes and ASM did not come up. I also see the HEADER_STATUS as UNKNOWN for all the external storage drives.
Tue Oct 14 11:49:34 2008
SQL> ALTER DISKGROUP ALL MOUNT
Tue Oct 14 11:49:34 2008
NOTE: cache registered group DATA number=1 incarn=0xf4a85ef9
Tue Oct 14 11:49:34 2008
Loaded ASM Library - Generic Linux, version 2.0.3 (KABI_V2) library for asmlib interface
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
ORA-15186: ASMLIB error function = [asm_open], error = [1], mesg = [Operation not permitted]
Tue Oct 14 11:49:34 2008
NOTE: Hbeat: instance first (grp 1)
Tue Oct 14 11:49:39 2008
NOTE: start heartbeating (grp 1)
Tue Oct 14 11:49:39 2008
NOTE: PST update: grp = 1, dsk = 4, mode = 0x4
NOTE: PST update: grp = 1, dsk = 5, mode = 0x4
NOTE: PST update: grp = 1, dsk = 6, mode = 0x4
NOTE: PST update: grp = 1, dsk = 7, mode = 0x4
NOTE: PST update: grp = 1, dsk = 8, mode = 0x4
NOTE: PST update: grp = 1, dsk = 9, mode = 0x4
NOTE: PST update: grp = 1, dsk = 10, mode = 0x4
NOTE: PST update: grp = 1, dsk = 11, mode = 0x4
NOTE: PST update: grp = 1, dsk = 12, mode = 0x4
NOTE: PST update: grp = 1, dsk = 13, mode = 0x4
NOTE: PST update: grp = 1, dsk = 14, mode = 0x4
NOTE: PST update: grp = 1, dsk = 15, mode = 0x4
Tue Oct 14 11:49:39 2008
ERROR: too many offline disks in PST (grp 1)
Tue Oct 14 11:49:39 2008
NOTE: cache dismounting group 1/0xF4A85EF9 (DATA)
NOTE: dbwr not being msg'd to dismount
ERROR: diskgroup DATA was not mounted
Tue Oct 14 11:49:39 2008
WARNING: PST-initiated MANDATORY DISMOUNT of group DATA not performed - group not mounted
Tue Oct 14 11:49:39 2008
Errors in file /home/oracle/admin/+ASM/bdump/+asm_b000_6358.trc:
ORA-15001: diskgroup "DATA" does not exist or is not mounted
Tue Oct 14 12:31:17 2008
Shutting down instance: further logons disabledPATH NAME HEADER_STATUS MOUNT_STATUS MODE_STATUS STATE GROUP_NUMBER DISK_NUMBER FREE_MB READ_ERRS WRITE_ERRS
ORCL:DISK1 MEMBER CLOSED ONLINE NORMAL 0 0 0
ORCL:DISK9 UNKNOWN CLOSED ONLINE NORMAL 0 15 0
ORCL:DISK11 UNKNOWN CLOSED ONLINE NORMAL 0 2 0
ORCL:DISK12 UNKNOWN CLOSED ONLINE NORMAL 0 3 0
ORCL:DISK13 UNKNOWN CLOSED ONLINE NORMAL 0 4 0
ORCL:DISK14 UNKNOWN CLOSED ONLINE NORMAL 0 5 0
ORCL:DISK15 UNKNOWN CLOSED ONLINE NORMAL 0 6 0
ORCL:DISK16 UNKNOWN CLOSED ONLINE NORMAL 0 7 0
ORCL:DISK2 MEMBER CLOSED ONLINE NORMAL 0 8 0
ORCL:DISK3 MEMBER CLOSED ONLINE NORMAL 0 9 0
ORCL:DISK4 MEMBER CLOSED ONLINE NORMAL 0 10 0
ORCL:DISK5 UNKNOWN CLOSED ONLINE NORMAL 0 11 0
ORCL:DISK6 UNKNOWN CLOSED ONLINE NORMAL 0 12 0
ORCL:DISK7 UNKNOWN CLOSED ONLINE NORMAL 0 13 0
ORCL:DISK8 UNKNOWN CLOSED ONLINE NORMAL 0 14 0
ORCL:DISK10 UNKNOWN CLOSED ONLINE NORMAL 0 1 0
16 rows selected.

Hi,
Verify if oracle software has read write privileges on raw devices, cause some Operating Systems changes owner to root after reboot the servers.
regards,
Rodrigo Mufalani

"All Desktops" not staying after reboot

Similar Messages

Maybe you are looking for