All Develop sliders visible at one time across two monitors or wide monitors

Is there any way to have all the Develop models visible at one time instead of having to scroll downwards ?
I have a 21:9 screen with lots of horizontal space, so I would like to have the Develop sliders fill the space horizontally instead of vertically. Or if Develop panel can be fully visible on a second or third monitor.

As far as I know there is no way you can do that.

Similar Messages

  • Spanning one image across two monitors?

    If this has been asked before, I applogize. It is probably a simple solution, but, not sure if it is possible.
    I am using an Imac 17" Display, 160 Gig HDD, 1 Gig RAM and an external 19" monitor (as an extended desktop)
    I have downloaded some of the split screen backgrounds, and, they look fantastic, but, they can be hard to find.
    I am wondering, if I get a widescreen background (Single. Not Dual Monitor), can it be set to Span the image across both monitors?
    My resoloution for my 17" Imca is 1400 X 940 (Or, whatever the native resolution is for it)
    My external monitor is set to 1280 by 1024
    Any help would be appreciated.
    Gary

    I had the same problem.  U need to install ITAP RPD, it supports spanning very well.  U can test with their trial version.
    I have a new IMac 27" with 27" Thunderbolt second display.  Working on remote desktop with 5120 x 1440 pixels is awesome, and ITap supports it very well
    Cheers

  • How can you delete all the e mail at one time instead of one at a time?

    How can you delete all the e mail at one time instead of one at a time?

    you'd have to do it from the computer,

  • Move all audio track anchors at one time together

    Move all audio track anchors at one time together..is this possible? I imported a remix, figured out the tempo. Now I want to make the tracks ( regions) all start on a downbeat to align with my measures..thx in advance for your assistance..

    > How do you do that?
    I'd begin by reading the Beat Mapping Track section in the Reference manual, p. 337...
    > They are not referencing anything.
    Oh, yes, they are: these anchors actually reference the first sample to be played... Presumably, they were recorded to start together and play along, right? When you dragged them, they all landed as new audio regions starting at the beginning of the same bar, since their respective anchors are all aligned at the start of the so-called region. These anchors will stick to the tick they landed to, whatever tempo change you make, unless you move the regions.
    Or maybe you're missing something?...

  • Stretching desktop across two monitors with FX5600

    Hi
    Can anyone please help me stretch my desktop across two monitors? I have just purchased an MSI FX 5600 VTD256 and am using it on a P4P800 ASUS Motherboard and Windows XP Machine. I can't get the desktop image to stretch over my two monitors. Instead it duplicates on each one. This is causing further problems within the CAD package I am using, as the dialog box positions are not being remembered.
    Any help much appreciated.
    Cheers,
    Link.

    what driver version are you using ?
    because they updated nview in the latest version to simplify it
    anyway in the old ones (Nview 2.0) you dat to check the "Treat different outputs on the ... as separate videocards" or something lyke that in Display->properties->advanced->nvidia ...
    in the new ones (Nview 3) is pretty much the same ... just look for it

  • How do you update all of your podcasts at one time using the new iTunes 7?

    With the old iTunes, I could manually click "update podcasts" at the top right, and it would check all of my podcasts. How do you do that in iTunes 7 without having to click each one? I would like to manually update the podcasts at one time.
    Dell   Windows XP  

    Click refresh in the bottom right corner

  • Playing movie full-screen across two monitors?

    I have a PC with a pair of 800x600 monitors side-by-side for a dual-monitor desktop. I want to play a very wide (1600x600) QuickTime movie fullscreen across them both (not simply mirrored), with no window border or Windows taskbar visible. But when I click the zoom box for the movie window, it resizes the window to one display, so that it doesn't touch the other display at all.
    I'm not currently using QuickTime Pro; will paying for that upgrade allow me to play a movie "Full Screen" across two screens, or will that still limit the movie to one screen?
    Is there any other way for me to play the movie across two displays? (Again, not mirrored - the movie is wide enough to fit both displays.) Is there some other QuickTime movie player that'll do this for me?
    (The movie is a pair of eyes looking back and forth. It's for a Halloween display, one monitor per eye.)

    I had an older version of VLC and it did not work but I tried the beta version of 0.8.4test1a and it plays everything from h.264,mpeg4,mpeg2,avi,vob,wmv and a few more. The only other things I know I have done is that I have the pro version of quicktime 7.0.3 and I have a codec pack from ColeMedia Codec Pack from http://www.cole2k.net/ other than that I don't know what else I did that made it work.

  • Getting the DW panes across two monitors

    I work with two monitors and have CS3.
    I'd like to be able to have DW across both or at least to let me move a pane onto the other screen. is tis possible?
    Related to this: is it possible to have the Code pane AND the Design pane visible at the same time?
    thank you........... liz

    You should be able to simply drag any of the palettes onto your second monitor.  See the attached image -- which shows an unsolved problem I'm having with dual monitors, but also shows you an example of a dual-monitor layout.
    John

  • Expanding desktop pictures across two monitors

    So I finally have two monitors and I have always wanted to get pictures that could span over two monitors. I have some now and they aren't going over both monitors. They just fill the one monitor and clip off the excess...kind of like a Pan and Scan. What am I doing wrong???

    You can also use a paint brush and paint the image across both screens.
    Glor

  • How to run two programs with one PC and two monitors

    Good Morning,
    I have a requirement to run a parallel loop and update the progress in two monitors with one computer.
    For ex: its a two test stage, the process and progress of the 1st stage needs to displayed in monitor1 and similarly for 2nd stage to monitor 2 with program running with one computer.Would it be possible to do that.
    Thanks in advance

    Hi Parker,
    yes, it's possible. You also have properties to set windows to specific monitors...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Is there a way to have one workspace with two monitors?

    In Maverick is there a way to return to the system were you have 1 workspace and two monitor? Where at present there is this tendency for applications to auto hide partially.

    Yes it is, my bad. I'm running an external display myself and have that setting. I saw the preference with the checkmark and wrote that one by mistake.

  • One Time Capsule & Two Airport Express for Range Extension but will my time capsule hard drive be accessible to all the user on network ?

    I am planning to buy 2TB time capsule which is [2TB hard drive + Airport Extreme] and two Airport Express to extend the range of my wifi network. we have a large family & because of that we have 1 macbook, 2 laptops , 2 desktops, 4 iphones, 2 ipads, 3 android phones, 2 apple tvs, 2 ps3's. all of these devices are on my Wifi network but some of them are off usually ps3, apple tv and desktops computers r off but still their is alot of traffic. Now i am buying this 2TB time capsule instead of Airport Extreme so that i can save money by getting 2TB hard drive for me only & not the whole family so i want to know if i can keep the hard drive private & at the same time i want to share my internet connection with all of these devices which belongs to my family members, will this be okay ? and they wont be able to access my hard drive ? & will i be able to access my hard drive if i m connected to any of those two airport express & not the main time capsule. indirectly i will be connected to time capsule by using airport expresses in client mode correct me if i am wrong 

    You can use TC with whatever wireless you currently have.. if it works you should not need to buy a pair of express as well. The best method is to bridge the TC and plug it into the main router.
    You can certainly keep it private for your own access only.. simply set a disk password only you know. Easy.
    As long as you have a single network, then wherever you connect in the network will be able to access the TC.. but also note file speeds to the TC with multiple wireless hops will be terrible slow.
    Also note all security on the TC is an illusion. It is a home device.. press reset and anybody can then access it. You can even get past disk password. If you want security keep the device off the network.. use an external hard disk plugged directly into the computer.

  • Can I change all iWeb page dimensions at one time?

    I have website will about 50 pages.  I am now finding out on some browers that the top menu bar is wrapping.  I think I can fix the problem by increasing the width 10 pixels or so.  Is there a way to do this universally or do I have to change each page individually?

    You have to do each page individually.
    FWIW it is now confirmed that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
    On June 30, 2012 MobileMe will be shutdown and our websites and galleries will be lost. However, iWeb will still continue to work but without the following:
    Features No Longer Available Once MobileMe is Discontinued:
    ◼ Password protection
    ◼ Blog and photo comments
    ◼ Blog search
    ◼ Hit counter
    ◼ MobileMe Gallery
    All of these features can be replaced with 3rd party options.
    I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken.  If I published directly from iWeb to the FPT server those two features continued to work correctly.
    There's another problem and that's with iWeb's popup slideshows.  Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
    Click to view full size
    However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone.  How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
    It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
    Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
    This may be of some interest to you: Life After MobileMe.
    OT

  • I use two apple tvs, when useing mulity speakers on computer plus two tvs the audio plays on all but only video on one, i use two apple tvs, when useing mulity speakers on commputer plus two tvs the audio plays on all but only video on one

    i use 2 apple 2nd generation tvs, on mulity speakers, computer and 2 tvs have audio but only one has video, why does the video not play on all at the same time

    Welcome to the Apple Community.
    I'm not entirely sure whether you're asking if it should or why it doesn't. To cover the first point it isn't supposed to, so your set up is working correctly.
    As to why not I'm not absolutely sure, it isn't a bandwidth restriction as whilst I can't be certain that all our 6 Apple TVs have all been streaming video at the same time (when initiated from the Apple TV), I believe at least 4 have on occasions. So I imagine it's another technical limitation that I'm not aware of, perhaps it's a synchronisation problem, who knows.

  • Business Rules Only Visible in One of the Two Planning Webs

    Hi all.
    I have this issue with a classic Planning application deployed to run with the calculation module to Business Rules in v11.1.2.1. I have also load balanced EAS/APS and Planning servers but when I log into Hyperion Planning in one of the server and I check the available BR I can see them but if I go into the other Planning web I cannot. This is logging straight into the Planning Webs using the different servers names. Inside EAS I have done the necessary location, provisioning and cluster to be able to appear in both Planning webs but still not working.
    Does anyone knows how to fix this problem?
    Many thanks
    J

    The solution was to create a BR cluster within EAS and add both server locations into it
    I hope it helps
    Regards,
    John

Maybe you are looking for