All devices listed as wireless clients not showing up.

I have an airport extreme (newest version) I have my apple tv, computer and ipad showing up listed as wireless clients, however my iphone does not show up. It is connected to my network. I have tested with another iphone (same version 4S and same iOS) it shows up but not Mine.
Do u know why it is not showing up?

remove power cord from the PSU and >>Clear CMOS Guide<<
if the wifi card is removable, try to reseat it
also install latest killer drivers from:
http://www.msi.com/support/mb/X99S-GAMING-9-ACK.html#down-driver&Win8.1 64
[try older version as well if needs]

Similar Messages

TS4062 I can't sync music on my computer to my ipod touch; the ipod shows up under Devices in itunes but does not show buttons (Summary etc.) when I click on it. Suggestions?

I can't sync music already on my computer to my ipod touch; the ipod shows up under Devices in itunes but does not show buttons (Summary etc.) when I click on it. I've read through all the Help tutorials but none of them say what to do if the sync options don't pop up when you highlight the device. I've already spent way too much time trying to figure this out and it's driving me crazy! Thanks for any help you can offer.

This is correct. It will not show in finder. It is not an external storage device.
The music sync is one way - computer to ipod. The only exception is itunes purchases. Open itunes connect ipod, do not sync, click File>Transfer Purchases

The option to sync wirelessly is not showing up on the summary tab

The option to sync wirelessly is not showing up on the summary tab when iphone is connected. Does anyone know why?

Here is a simple example
This square starts like this
No normaly once selected like that when you "grab the corner" the scroll bar will come up and adjust dimensions of the entire square. But when I do it it only changes one side like this
I want it to adjust all sizes like it used too without having to pull each individual corner to have a flat perspective.

Airport wireless clients not seeing airport ethernet clients.

I have a problem with airport wireless clients not being able to see airport ethernet clients on the same base station - bonjour does not work for this, appletalk does not work for this, and Remote Desktop does not work for this either. Is there a way around this? Is this normal or a bug? I can change the last surviving ethernet machine to wireless but I if I can avoid the cost that would be good.
Miklos.

It's ok, I got it working. I just reset the second airport, went through the "easy" set up, reset, went into manual config, changed the network to a WDS (to match the main base station) and changed the setting that allows further distribution of the network, and it's working perfectly now!!
Hooray!!
I have to say, of all my Apple experiences, the base station set up was the least "Apple", it was confusing, complex, and somewhat erratic, but now that I have the config perfect, it seems to be working without a hitch. I just hope they can include network templates in the next software (for other people since I'm good to go now anyway) - that would be more Apple - so that people can just go bang I have this config, and perhaps for the more obscure set ups a fine tune would work off a template to get people set up faster and easier and with less confusion.
Miklos.

QueueBrowser not scaning all messages in JMS queue (ie not showing inprogre

Hi all,
I am using JMS in jboss-3.2.3, when scaning for pending messages i am using QueueBrowser.
But QueueBrowser not scaning all messages in JMS queue (ie not showing inprogress message)
But i need to know all messages including ongoing messages..
Antone plz help me
I am using Queuesender and QueueReceiver ..But some Exception or Error causes my JMS server(QueueReceiver listening for onMessage()) hanged up..and not responding to remaining messages...So i need to find pending messags in JMS queue..How can find?
Now i am using QueueBrowser to get list of pending msgs in queue... But doesn't contains Message which passed for processing (called onMessage())
.. But i need to find this also..How can?
Thanks,
Thilsen

You're right in thinking that the behaviour you describe looks wrong.
Take a look at the QueueBrowser interface which can be used to inspect a queue. You get one using QueueSession.createBrowser(Queue). The QueueBrowser allows you to scan a queue without consuming the messages. However note that the state of the queue may change while you're observing it through the QueueBrowser so what you see might not always be a 100% accurate representation of the queue at any given time.
Other things to check:
- message selectors - are you setting a message selector on your queue receiver which is resulting in not all of the messages 'matching'.
- expired messages - are you setting a time-to-live on the messages that you publish.
Hope this helps,
David Ingham
http://www.arjuna.com

In the source list contract Number is not showing up.

On 10.11.2010
we added this Material 2211583 to contract 4600000149.
When we do display source list it is still not showing up.
Contract 4600000149 Validity Start 04.02.2008 Validity End 31.12.2009
We have changed validity End date for Contract to 31.12.2010;even then it is not showing up in source list
Is there any possibility to get Contract number in the source list
Thanks in advance
SAP MM

what did you do to get the contract into the source list for this item?
it does not create a source list item by itself, only because you entered the item in a contract.
You can either create the source list entry from the contract via menu. or you have to enter the contract manually in ME01 or you generate the source list with ME05

I have ipod 120 classic . I have been using genius on my pod to create playlists on it. All of a sudden it does not show u p or function!? Should I rest it?

I have ipod 120 classic. I have been using genius on my ipod to create playlists on it.All of a sudden Genius does not show on my ipod or function. Should I reset ipod? Jim34

Hi,
Check Finder>Preferences>Sidebar, is it checked there to show external drives?

Wireless adapter not showing up in device manager

Hello all,
I am having a particularly frustrating problem. I was playing around with the memory timings to overclock my computer and all of a sudden, my wireless adapter ceases to exist to my computer. It does not show up anywhere in device manager (including no unknown devices or anything), only the Ethernet shows up. I have tried a system restore, turned off all OC and my BIOS is updated to the most recent version. Is it possible that trying to overclock my computer caused the wireless adapter to burn out? The motherboard I'm using is the msi x99S gaming 9 ack.
Any help would be very appreciated, thank you all in advance for your time to help out!

remove power cord from the PSU and >>Clear CMOS Guide<<
if the wifi card is removable, try to reseat it
also install latest killer drivers from:
http://www.msi.com/support/mb/X99S-GAMING-9-ACK.html#down-driver&Win8.1 64
[try older version as well if needs]

CRM 2011 Outlook Client not showing all columns in Opportunity Views

Versions:
CRM: 2011 On-Premise - 5.0.9688.1533
Outlook: 2010 Professional - 14.0.6122.5000 32bit
CRM Client for Outlook: 5.0.9690.1992
Basic Problem
The Outlook Client views that show up in Opportunities do not have all the columns that are in the view.
Some of the views do, but not all of them.
Example:
View Name: Won Opportunities
Columns in view: Created on, Location, Quote Type, Scope of Work, Quote Number, Booked Sale Date.....8 other
columns (many custom columns)
Columns in View in Outlook: Icon, Quote Number, Categories, Flag....thats all.
Other Notes
This only happens in the Opportunity section of the Outlook Client.
This does not happen in advanced find in Outlook or anywhere in the web client. This does not happen for any other entity.
This happens on all of our users Outlook clients.
I have tried recreating the view.
No error messages are recording in any logs that I can find.
Any ideas on why this is happening or how to fix it?
Thank you
Paul

1. Are you sure this is a System View and not a User Defined View? Can you take a screenshot of all the availalbe Outlook views when you click on the little down arrow to add a new view? Yes. See the screen shot at the bottom. It is a public
view.
2. What happens when you close the view and add it back? same results.
3. What happens when you restart Outlook? I ask because if you customized your System Views, those are only persistent for a given session. If your restart Outlook, then it should reset the View. we have tried that. and uninstalled Outlook client
and reinstalled. And uninstalled Outlook and reinstalled. Same results. The only view that works for opportunities is the Default Custom View. The strange thing is that the filters are working just fine. just not the columns.
4. A workaround - have you tried creating a new System View similar to the one you want? Yes. same results

Outlook Client not showing all emails

Hi,
We have signed up for emails on domains.live.com for the domain name kamtress.com
We setup Outlook clients in our office using IMAP.
But the outlook client does not show all emails and also shows lots of copies of sent emails while we would have sent only one.
Could you please help us out with this issue as to how this can be rectified?
We use Outlook 2013 on Windows 7.
Thank you.

Hi,
First of all, please make sure your Outlook is fully patched.
Then, please log on your web mail and check if you can see all your emails. If so, please open your Outlook, go to File > Info > Account Settings > Account Settings > Highlight your Imap account and click
Change > in the Change Account wizard, check how you set the 'Mail to keep offline' slider. Change it to
All and then check if you can see all your emails in Outlook now.
If problem persists, please try to create a new mail profile in Control Panel and set up your IMAP account in the new profile to check if it helps. To configure an email account via IMAP, please refer:
http://support.microsoft.com/kb/829918/en-us
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support

Drop Down In List From Lookup Does Not show all items in mobile view

I have list called "incident".
I have a list called "locations"
The "incident" list looks up a value from the "location" list as a dropdown.
The location list contains 25 building names.
When I try to fill out the "incident" list in mobile view
the "location" drop down only shows 16 items. I checked the "locations" mobile view limit and set it to 99 to make sure all would show up.
The desktop view for the "incident" list shows all 25 buildings from the "locations" list.
Any advice on how to get those extra 7 locations to show up?
Jef

Still don't have an answer. I'm now looking to use a radio button or something to use as a work-around. If I use a lookup and tell it to allow multiple selections (shows as checkbox) it does not show all values in the mobile view.
If I input each item and choose choice, it only shows up as dropdown. I need radio buttons. If I choose lookup and allow multiple selections, it does not show all the options.
I need some help on this.
Jef

HP C6380 photosmart all in one wireless does not show in mac printers

I have a new MacBook Pro and an "old" HP C6380 photosmart printer/scanner. It is connected to my wireless network but does not show on Mac to choose to add as a printer. What can I do? I do not want to buy a new printer!

Never mind. It just won't work wirelessly. I connected to router with cable & it works OK.

Wireless adapter not showing any available networks

I've recently discovered that my Intel Centrino Advanced-N 6235 wireless adapter in my Asus Zenbook UX32VD running Windows 7 64 bit is not working as it won't show any available networks while my phone can find plenty in the same area.
So far I've:
-Re-installed the driver. Before I did this the adapter wouldn't even show when trying to change adapter settings. When I looked at the adapter in device manager I found an error code 52 which disappeared after I re-installed the driver.
-Re-installed the client for windows networks installed for the adapter which did not make a difference.
-Temporarily turned off my AVG-free anti-virus which did not make a difference.
When looking at the adapter after clicking change adapter settings in the networks and sharing center it says it's not connected, but as stated above it doesn't show any networks to connect to.
Also, when I try to use the networks diagnostics tool I get the following error message:
Windows cannot find
'::{26EE0668-A00A-44D7-9371-BEB06...\resultPage?keywords=+Network;NetworkDiagnostics'.
Make sure you typed the name correctly, and the try again.
Any possibly solutions I've not already tried are welcome. Thanks in advance for any help.

Hi,
Locate to Services and check all services relating to wireless and network are enabled: Wireless Zero Configuration and WLAN AutoConfig, etc.
Also, make sure your NIC is working correctly from device manager.
http://kb.linksys.com/Linksys/GetArticle.aspx?docid=108496d0924847afaf9c4a7bb72110b5_5646.xml&pid=80&converted=0
Have you tried manually connecting to wireless?
http://kb.linksys.com/Linksys/GetArticle.aspx?docid=8fd9ee85a0bf42f0986ed23390be8c66_19850.xml
Andy Altmann
TechNet Community Support

How do I remove a device from iTunes that does not show up under "Manage Devices" in account?

My husbands macbook is logged in with his iTunes account. For some reason my iPad (linked with my account) keeps showing up on his macbook under his account. I went on his account and to manage devices and my iPad is not one of the devices listed. So how do I permanentaly delete my iPad from showing up on his account?

It is showing up in his iTunes library as all iDevices would.
That has nothing to do with his iTunes account.
My iPad device is not an option as a device being used by his apple ID.
It's not being used by his AppleID.
Select the iPad in his iTunes library.
Click the Summary tab.
Uncheck Sync this iPsd over wifi.
Uncheck Open iTunes when this Pad is connected.
Right click > Eject the iPad.

Two devices synced, but firefox will not show most tabs from other devices.

I have had my laptop and my PC synced forever. Up until a week ago when I clicked "tabs from other devices" it would show me all of my tabs from the other computer, and if I closed one or opened a new one it would show up in the list almost instantly. Now all of a sudden when I click show tabs from other devices it will only show one or two of the tabs I have open on the other computer and ignore all the rest. No matter what I do I can only get it to show like google and facebook. Everything is still synced properly, bookmarks and all that jazz work fine. It's just the show tabs from other devices that isn't working, and that's the only feature I care about. If your suggestion is to make a new sync profile, don't bother responding, as that is not the problem or the solution.

Hi tdkevin,
This is strange you were not asked to try the new sync. As the old sync has the tab sync feature, but the new one has a new place for them. In order to move to the new sync you have to remove all the devices from the old sync and then it will allow you to set up the new one.
In Firefox for Android
In the new one in a new tab, tap on History, then on the bottom there are two icons: a clock and one with 4 grey squares. Tap that one and look at the recently synced tabs.
In Firefox for Desktop
if you have not set up the new sync the Tabs will sync every interval of time set by default in the about:config page. (search for sync interval I think). In the new one the about:accounts page will have a manage button that will take you to the preferences of sync. There you can check the Tabs tick.
I hope this clears up the differences between the old and new. The original question though was why some tabs were syncing and others not. I do not know, we can look at about:sync-logs if you have any errors in those log files. This may help lead to some more info.

All devices listed as wireless clients not showing up.

Similar Messages

Maybe you are looking for