All Documents by User

Hello,
it is possible to get the list of all documents created by users in specific period?
Can anyone help?
thank you
D.

Thank you for your reply,
I need the list of all documents created by the user.
Yes I know, that I can check each table individually, but I thought, that maybe there is a nicer way how to do it,
maybe with one report.
Is there something like this?
I need this as a part of documents for auditors, so I think, that by checking each table separately I can miss something.
D.

Similar Messages

  • Show in a Iview all documents of an user of the whole portal

    Hello everybody,
    I want to show in an Iview all documents of an user of the whole portal, not only the documents under his folder /userhome/Personal Documents
    Any ideas?
    Thanks in advance
    Guillermo.

    ... and of course I have to add that this can be done with very few programming (but with that - with much more possibilities) by using a redirect "proxy iView", which is described in detail (and is taking just this scenario as one use case among others) on the slides of my TechEd presentation "Implementing Dynamic iView Properties", at least available for TechEd visitors now.
    On the other hand, searching for "proxy iView" on SDN will return different results where at least I have described the basic idea.
    Hope it helps, too,
    Detlev

  • How to make warehouse field inactive for all users in all documents autom.

    Hi All,
    Can anyone pls tell me "**how to make warehouse field inactive for all users in all documents without having to do it through form setting** "for each and every user. It should be visible but inactive
    Thanks & Regards,
    Mukesh Agrawal

    Hi,
    As a work around create a warehouse SelectWH and map the mandatory acoounts as a On hold account(in chart of accounts).So there will not be any posting on this account.
    And set this warehouse as default warehouse for all users.
    So without selecting the appropriate warehouse the user can not add the document.
    I think this might resolve you issue.

  • Where I can see all document of pay and the user that modified

    Hello people
    Where I can generate a report with all user that modified a document of pay.
    I have a problem, in the finance area, they request a reports with all users that modified some document of  pay.
    In the FB04 transaccion  I see the document of pay and user that modified, but is one for one, in my company are generated thousand documents pay for day.
    I see that the transacction FB04 gets the information of the tables "BSEG", but in this table I do not have the field "User"  and with this I will can link the document of pay more the user and date
    Example
    Number of document              User                              Date
    30004567                                Pvaldez                        05.01.2010
    30008756                                Rpower                         07.08.2011
    30008890                                Mramos                        15.11.2012

    Hi Naveen.
    I reviewed the two notes, but  this not help me with my problem.
    I think that in the system when a user modify a document pay this is saved a register in some table.
    In the table BSEG I find that there a part, but this have link with other table for complete the report, I do not know what other table complemented this information.
    I require a report with all document of pay more the user that modified and the date
    How  I can generated this report ? 
    atte.
    Gerardo Ceballos

  • Error when generating IDoc from MC document - workitem to all the SAP users

    A workflow item with the subject of “Error when generating IDoc from MC document” is sent to all the SAP users' inbox. Is it possible to stop the generation of this work item? If that is not possible, can we limit sending the work item to a specific user/agent instead of all the users in the system?
    It appears that these work item or error message are generated when one of the developers reopen the POs and add line items. Moreover, during that time the procurement team blocked the IDOCs from going out to the vendors when changing and resaving the POs. Therefore, we need stop the generation of error message/work item when the IDOCs generation blocked.

    Please check Rule 70000141which is the default rule for this task. Inside this rule a FM is attcahed which is reading table EDO13 and EDPP1 where agent is retrieved Probably this table entries are not maintained. This Workflow is getting triggered from Message cOntrol I think.
    Please check this link for
    http://help.sap.com/saphelp_47x200/helpdata/en/c5/e4aec8453d11d189430000e829fbbd/frameset.htm
    <b>Reward points if useful and close thread if resolved</b>

  • Concerns ALL Time Machine Users. HOW TO MOVE Time Machine backups. Help !

    Concerns ALL Time Machine Users :
    MOVE (or COPY) Time Machine backups from a "x"To Disk to an "y"To greater disk.
    Hello and thank you all for reading me,
    First, excuse me if I make language errors (I'm French).
    Secundo, I don't know if you'll find something interesting for you
    in what I write about Time Machine and my own problems,
    but there's a possibility also that YOU could perhaps help me.
    I'm talking about Time Machine and his **** Backups.backupdb folder,
    containing "*Name of your Mac*" folder,
    this folder containing Time Machine backups, format : YYYY-MM-DD-HHMMSS
    Time Machine doesn't recognize the backups it made *IF YOU MOVE THEM*.
    I have perhaps a solution in this message.
    You'll see below what kind of problem I (and you could) have.
    Since 12/01/10, an Apple Adviser Level Two (and me)
    are trying to understand how to move backups from TM1To Disk to, let's say, a bigger one.
    My case is TM1,5To.
    *Purpose :* Move 19 backups from Time Machine X disk to Time Machine Y disk.
    Delete TMX disk Time Machine backups after that.
    Make TMY disk the current used Time Machine Disk.
    I don't remember exactly what we did before
    (we even created a "root" account with password (dangerous to do),
    but it didn't solve the problem),
    but we finally copied :
    TM1To > Backups.backupdb > *MacBook Pro* folder (containing 19 backups) into :
    TM1,5To > Backups.backupdb folder.
    The Copy application announced *16 hours !* (without antivirus, to remove absolutely).
    So I said goodbye and thank you to my Apple Adviser. After *8 hours*, Copy failed.
    BUT it had succeeded to copy *4 backups ONLY* (why ?) in TM1,5To.
    I immediately verified and checked each of these with Get Info.
    They had EXACTLY the same size (Byte to Byte) as in TM1To.
    ➔ BUT HERE IS MY OBSERVATION :
    After designing TM1,5To as Time Machine Disk, I ordered it to Backup (now).
    And what did Time Machine do in TM1,5To > Backups.backupdb ?
    It created a *NEW folder*, named *MacBook Pro 2* !
    ➔ *I HAVE NO ACCESS* to TM1,5To > Backups.backupdb > *MacBook Pro* (4 backups copied from TM1To, remember) ;
    ➔ while I still *HAVE ACCESS* to TM1To > Backups.backupdb > *MacBook Pro* (19 backups) ;
    ➔ *AND I HAVE ACCESS* to TM1,5To > Backups.backupdb > *MacBook Pro 2*,
    where Time Machine makes actually his backups.
    *NOTE :* If you *change the name* of your computer,
    Time Machine *changes automatically the name* of the folder who is in Backups.backupdb folder.
    ➔ ① I have *never seen* such protections (Sharing and Permissions).
    You are not allowed to do anything. I've tried to change permissions,
    first : "R+W", after that : "Make (Me) the owner", I can tell you : DON'T DO IT !
    ➔ ② It's impossible to install an OS on a Time Machine disk
    (I thought it would allow better permissions).
    OS Installer detects the existence of a Backups.backupdb folder
    and refuses to install on this disk or partition.
    I have now the bad intent to install minimal OS X
    1) after deleting (how ?) this folder (but not its contents, how to move it ?)
    and 2) declare *after that* the disk as Time Machine disk.
    ➔ ③ Time Machine doesn't backup OTHER Time Machine backups
    (who are in an ancient-not-choosed-for-backups Time Machine disk) NOR backups this disk
    (detects, once again, the existence of a Backups.backupdb folder).
    AND you can't *absolutely not remove backups from the folder the're in*
    (for me, *MacBook Pro* or *MacBook Pro 2*).
    ➔ ④ I didn't have time to do it, but I think there would perhaps be a solution
    in restoring backups in partitions specially created to receive them (having the same name,
    that sort of thing) and then re-backup these partitions (vicious and complicated).
    There is a function on Mac OS X Install DVD : start with it, and then (do not install)
    choose "*restore from Time Machine backup*" from the menu bar (it's called "Utilities", I believe).
    ➔ ⑤ I *absolutely don't understand* what follows :
    — If I add (in my TM1To disk) the bytes of the 19 backups
    in Backups.backupdb > *MacBook Pro* folder, I obtain about *1,8 To*.
    — It's impossible (and not french).
    — When I check the size used with Disk Utility (NOT with Get Info),
    I find a correct (?) size : *about 750 Go*.
    — What are Time Machine backups made of ?
    It can't be aliases (because of their size, and because *aliases suppose originals,
    and where could they be ?*), or am I wrong and becoming crazy ?
    ➔ ⑥ If you refer to the numbers shown at the end of this text (*4 backups*),
    you'll see I could *delete duplicate elements* inside these 4 backups,
    to win space (but *what kind* of space *if I delete aliases* ?).
    Back-In-Time (see below) says he does it.
    BUT is it really the OLDEST items I have to destroy (see ⑤),
    when I don't know with what kind of ARTEFACT I'm acting ?
    What does Time Machine delete to create more backup space ?
    Is it REALLY the OLDEST backups it treats, or duplicates, OR ?
    *What you can do :*
    Find and go to Tri-Edre.fr or Tri-Edre.com/fr site (it's a french company
    that creates small Mac applications since fifteen years at least,
    I think I already bought them several programs in 1990) ;
    Their program *Back-In-Time 1.4.4* is free (Trial) and complete to download (with PDF docs too).
    It is *ENTIRELY DEDICATED* to Time Machine and *things you can't do* with.
    Price is about 30 €, I think it's worth.
    The TRIAL version you will obtain can only work on the LAST Time Machine backup,
    but you will see what's featured *AND :*
    You will ACCESS to ANY Time Machine backup you want
    (It has to be the last of a serie of backups, but the serie you want.
    I've bought the application and own an activation key, but you understand I can't give it to you
    (it would not be ethic) and anyway you would be obliged to disconnect AirPort, Ethernet etc.
    •➔ I have bought the application because I thought (it's said in PDF FAQs) I could IN THE END move Time Machine backup files, but it cannot, (I'm afraid).
    *BUT ANY ACCESS PROBLEM IS SOLVED.*
    •➔ Back-In-Time 1.4.4 can *delete :* duplicate backups, complete backups,
    or duplicate items inside one or several Time Machine backups,
    things that I believe impossible with Time Machine itself
    (I've seen it offers to delete ALL occurences of an item) ;
    •➔ The application can also restore anything you want, where you want
    (but I think Time Machine does it too ?)
    •➔ Believe it or not, but since I've bought it on 15/01,
    I've only worked about 2 hours (no, much more) on it
    and didn't make sufficient progresses (enhancements ?)
    to talk of it with sufficient experience (I'm a bad guy, don't you think ?)
    •➔ Tri-Edre offers on-line support, e-mail support (and so on),
    and I EVEN didn't manage to join them, because I did many other things,
    and also somewhat have been disgusted *not to be able to move* or copy
    *(accessible by Time Machine after that)* backups,
    and I also didn't succeed (*another Time Machine inconvenient*) to DESTROY an ".inProgress"
    Time Machine (package) which doesn't work anymore (several interruptions while active),
    date (and name) 2010-01-27-164345.inProgress, but is used (*with failure results*)
    by Time Machine (it's turned off till I find how to destroy its **** ".inProgress" package.
    •➔ I've asked my Apple Adviser Level 2 to wait for news from me
    before working himself on the problem, and I think I will send him this message
    to prove I haven't forgotten him.
    •➔ I'll send it to Tri-Edre too, in the same move.
    I hope those remarks to be useful for somebody, tell me if it has helped.
    I will also publish this in any Time Machine topics I find here, and in MacRumors site too.
    As you can see, I need help too … Does anybody have an idea ?
    Perhaps if I used a specific Copy software, it could work ?
    You'll see below an example of some time I've spent to study my problem
    (you will think I'm crazy).
    With my kind regards, and good luck if you have other Time Machine problems !
    Olivier Herrbach
    <Edited by Host>
    Le but du jeu est de transférer toutes les sauvegardes Time Machine
    d'un volume/partition que nous appelerons "1 To"
    sur un volume/partition que nous appelerons "1,5 To".
    *Je rappelle que les 4 sauvegardes effectuées par Time Machine sur le 1 To
    n'ont pas été reconnues comme siennes par Time Machine sur le 1,5 To,
    bien que strictement identiques en taille après leur copie.
    J'ai remarqué dans Back-In-Time des fichiers invisibles (tels que "TimeMachine.log"
    ou quelque chose de genre), et je soupçonne fort qu'ils n'ont pas été copiés et que Time Machine,
    ne les trouvant pas dans le 1,5 To, a ignoré à cause de leur absence les 4 sauvegardes décrites ici.*
    *Sauvegardes effectuées par Time Machine sur 1 To :*
    Path : MacBook Pro > Volumes > 1 To > Backups.backupdb > MacBook Pro
    MacBook Pro contient 19 items (dont un alias appelé "Latest") :
    1°) 2010-01-02-045758 Size : 913.207 B for 41.888 items comprenant :
    • Hitachi 1 To Size : 907.664 B for 41.887 items 7 folders
    Différence avec 1°) = - 5.543 B - 1 item (1 folder)
    2°) 2010-01-03-001957 Size : 982.211.325 B for 67.490 items comprenant :
    • Hitachi 1 To Size : 901.516 B for 41.886 items 6 folders
    Différence avec 1°) = - 6.148 B - 1 item - 1 folder
    • Samsung 500 Go Size : 981.302.510 B for 25.602 items 4 folders
    Total • + • = Size : 982.204.026 B for 67.488 items
    Différence avec 2°) = -7.209 B - 2 items (2 folders)
    — *Supprimer • Hitachi 1 To* dans 2010-01-03-001957. Comparer les dossiers.
    3°) 2010-01-04-222709 Size : 5.241.032.819 B for 26.509 items comprenant :
    • Samsung 500 Go Size : 5.187.330.874 B for 19.392 items 8 folders
    Différence avec 2°) = + 4.206.028.364 B - 6.210 items + 4 folders
    • StartUp Disk Size : 53.692.703 B for 7.115 items 4 folders
    Total • + • = Size : 5.241.023.577 B for 26.507 items
    Différence avec 3°) = - 9.242 B - 2 items (2 folders)
    — *Supprimer Samsung 500 Go* dans 2010-01-03-001957. Comparer les dossiers.
    4°) 2010-01-05-125449 Size : 9.428.705.396 B for 204.915 items comprenant :
    • HD 250 Go Size : 9.374.308.265 B for 181.575 items 7 folders
    • Samsung 500 Go Size : 692.898 B for 16.222 items 8 folders
    Différence avec 3°) = - 5.186.637.976 B - 3.170 items
    • StartUp Disk Size : 53.692.703 B for 7.115 items 4 folders
    Total • + • + • = Size : 9.428.693.866 B 204.912 items
    Différence avec 4°) = - 11.530 B - 3 items (3 folders)
    — Supprimer • StartUp Disk dans 2010-01-04-222709. IDENTIQUE.

    Dear James Pond,
    Thank you once again, and, don't be afraid, I will be as short as possible,
    but I need to use your last reply (I've cut all what was already said).
    JP ➔ You can copy an entire set of backups, but you cannot copy part of it successfully. See #18 etc.
    JP ➔ Read this from the first paragraph: "you cannot copy only selected backups,
    or merge two (or more) sets of backups." The structure of the backups simply will not allow it.
    I've read it, and found it regrettable. And I've also read, after that, what were the solutions under Leopard and Snow Leopard, and my conclusion is that it's a *dead end* for me. In short,
    — I can't move (by drag and drop) the 1To's Backups.backupdb folder (containing MacBook Pro, 19 backups, access) to 1,5To, because there exists already the Backups.backupdb folder created by copy on 12/01 with Apple Assistance (containing [MacBook Pro, 4 backups of 19, no access] and [MacBook Pro 2, 15 backups, access]). I don't even know if it could be deleted by the copy (and I don't wanna do that anyway) ;
    — I can't rename (and what for, I already forgot it) any Backups.backupdb folder nor delete it ;
    — I can't copy any Computer'sName folder (entire set containing backups), being in a Backups.backup.db folder, into another Backups.backupdb folder ;
    — I can't copy any (or all of an entire set) YYYY-MM-DD-HHMMSS backup(s), being in a Computer'sName folder, into another Computer'sName folder (even if it would be empty).
    — Saying NONE in Time Machine Preferences and putting it to OFF is simply no use.
    All is said. What I can try to do is :
    — Delete (not with Finder, but with Back-In-Time) all duplicate things I find in all backups and also entire duplicate backups (I have full access to all with the software) ;
    — Restore each of the reduced-to-minimum backups obtained in specially right-sized partitions wearing the YYYY-MM-DD-HHMMSS name of each restored backup. Time Machine doesn't backup his backups, but will backup these partitions.
    I'm afraid to be actually completely running out of the target, when I read what I write … It's time to go to bed !
    Reminder (OH) : Where did you find these amazing informations ?
    JP➔ Some of it is detailed here: http://www.appleinsider.com/articles/07/10/12/roadto_maco[]sx_leopard_timemachine.html
    ➤ Thank you ;
    JP➔ and here:
    http://arstechnica.com/apple/reviews/2007/10/mac-os-x-10-5.ars/14
    ➤ Thank you too ;
    JP➔ You have to understand the structure. When TM does the first backup, yes, it copies everything.
    On subsequent backups, it copies what's new or changed, but also makes "hard links" (sort of like aliases) to the copies of the things that didn't change. That's how it can only back up a few things each time, but show you a complete "snapshot" of the way your entire system looked at the time of every backup.
    ➤ I'll do my best to understand.
    JP➔ Time Machine deletes backups under two conditions. See the first part of #12 in the Frequently Asked Questions User Tip, also at the top of this forum.
    Under normal circumstances, you should not have to delete any backups. See the rest of #12.
    ➤ I understood why Time Machine didn't delete oldest backups : they were not weeklies ones.
    Reminder (OH) : How can I destroy the (corrupted ?) not working "2010-01-27-164345.inProgress" in 1,5 To, which causes Time Machine to abort any backup of any size I ask ?
    JP➔ Why do you think it's corrupted? TM is designed to "recover" a partial backup.
    ➤ I'll verify that with the little Tools/Apps I discovered in your FAQ User Tip document and downloaded immediately.
    Why didn't Apple tell me anything ? It's my fault, I'm perhaps not clear and not demanding enough more from them.
    JP➔ You cannot install OSX on a disk containing TM backups. That's because they need to be on separate disks.
    Technically, you could put them on separate partitions of the same disk, but that would not be a good idea.
    ➤ I never told you that (there would be no interest at all). I talked about the same location, to see if it would allow me more permissions, but if all works without doing it, it's really no use.
    JP➔ Sorry, I don't know what that means.
    ➤ I'm sorry, I didn't explain : "but if all works" meant : Copy Backups.backupdb, "without doing it" meant : Install OSX.
    ➤ If I install an OSX BEFORE, Time Machine will REFUSE completely to backup on it, it's understood.
    JP➔ Correct. The partition you're running from will not be an option in TM Preferences > Select Disk. That prevents TM from backing-up it's own backups!
    ➤ Would it be so absurd ? Maybe it could resolve my actual problem ?
    I think you are right, but I don't know why. I trust you.
    Reminder (OH) : "I will not bore you again except if I don't find a specific answer to an unknown-never-seen-incredible malfuction."
    JP➔ Don't worry about that -- thats what this forum is for, especially if you're still having problems.
    ➤ It's seems in fact that there is no possible solution, except what I said above and is certainly crazy/out of subject.
    Just try to be as clear and concise as you can.
    And please don't post the same things repeatedly -- it wastes your time and ours, and can confuse other folks.
    ➤ You're absolutely right and I tried to do so this time, and I'm sorry because I see it's still (far) not enough (short).
    Thank you once more. I wish you a good evening and week-end. Here it's 01:40 AM.
    With my kind regards
    Olivier Herrbach
    [email protected]

  • Word 2003 - Acrobat menus disappear for some (not all) documents

    I have a user who is having a very bizarre issue with Word 2003 and Acrobat 9 Pro Extended.  When he opens some Word documents, the PDF menus disappear.  They are immediately restored when he closes the document or creates a new document.  We've tried repairing and uninstalling/reinstalling to no avail.  He uses several custom templates, but they are applied at startup to all documents.  Any other troubleshooting ideas?  Could the fact that he's using Word 2003 instead of 2007 be causing the problem?
    Thanks

    More information: I just checked the version of the file I had on my hard drive, and it's doing the same thing there. However, the other similar documents in the same folder on my hard drive are not behaving this way, so apparently it's not specifically
    a SharePoint issue.
    Scott
    Scott Stocking

  • In using Office Mac 2011 I noticed that there is 3 gigs of data under Documents/Microsoft User data for Message Sources.  Anyone know what this is and if it can be deleted?

    In using Office Mac 2011 I noticed that there is 3 gigs of data under Documents/Microsoft User Data for meassage sorces.  Does anyone know what these files are and can they be deleted?

    Hi SDP1,
    Do you use Outlook or Entourage? If so, that's where all of your emails are stored. If you don't use either of those applications I'd go digging through the folders and see where all the space is tied up. Check the Identifies folders, that's probably where everything is located.

  • Document library, hide all documents by default.

    Hi
    I have a document library and I want to give access to client. I want to hide all documents by default except the few I share with them.
    If I upload new document it should not be visible to them by default until I share with them.
    I have given read access to client but they can see all documents by default and every time I upload a new document I have to manually control the permissions.

    Hi Shafaqat,
    If you want only document creator has view/edit/delete permission on document item created by himself, it has to set the permission on the list time level for each item.
    You can try using workflow to break the item permission inheritance and replace the proper permision on the current item per the following article. 
    http://johnliu.net/blog/2010/7/13/sharepoint-2010-configuring-list-item-permissions-with-workf.html
    And developing the custom code of Event Receiver is a better way to set the proper/complex item permission when item is created or modified. 
    https://msdn.microsoft.com/en-us/library/ee231563.aspx
    For uplaoding document to a library, I tested before, you can check and make sure the user has "View Application pages" permission on library level, then test again.
    https://social.technet.microsoft.com/Forums/office/en-US/40b31ca1-1ade-42f0-a984-c16ab266f423/sharepoint-upload-permission?forum=sharepointadmin
    Thanks,
    Daniel Yang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Daniel Yang
    TechNet Community Support

  • Is there a way to make InCopy open all documents in normal screen mode, always?

    Is there a way to make InCopy open all documents in normal screen mode, always?
    Now it opens in the screen mode the InDesign page is in when checked in. We don't want that.
    Thanks,
    Frederik

    No, there's no way to get rid of it in InCopy.  InCopy opens layouts in the mode the InDesign user saved them, including Normal vs. Preview, Frame edges showing or not, Hidden characters showing or not, and so on.
    You could try asking the designers to switch to Normal view before saving the INDD file.  Or you could assign a keyboard shortcut to the Normal view in InCopy and tell everyone to use that. We're on Macs so we use Control-N for Normal and Control-Shift-N for Preview.
    AM

  • CFL - "oForm.ChooseFromLists.Item("?")" List in all documents

    Hi to all, is there anyone who can tell on how to get the exact "oForm.ChooseFromLists.Item("?")" list in all document forms: example AR,AP,Inventory transfer, Service call etc.....

    Hi
    Please use this For your Dobts
    Member Description Value
    oChartOfAccounts ChartOfAccounts object. 1
    oBusinessPartners BusinessPartners object. 2
    oBanks Banks Object. 3
    oItems Items object. 4
    oVatGroups VatGroups Object. 5
    oPriceLists PriceLists object. 6
    oSpecialPrices SpecialPrices object. 7
    oItemProperties ItemProperties 8
    oUsers Users object. 12
    oInvoices Documents object that represents a draft of sales invoice document. 13
    oCreditNotes Documents object that represents a draft of sales credit note document. 14
    oDeliveryNotes Documents object that represents a draft of sales delivery note document. 15
    oReturns Documents object that represents a draft of sales return document. 16
    oOrders Documents object that represents a draft of sales order document. 17
    oPurchaseInvoices Documents object that represents a draft of purchase invoice document. 18
    oPurchaseCreditNotes Documents object that represents a draft of purchase credit note document. 19
    oPurchaseDeliveryNotes Documents object that represents a draft of purchase delivery note document. 20
    oPurchaseReturns Documents object that represents a draft of a purchase return document. 21
    oPurchaseOrders Documents object that represents a draft of purchase order document. 22
    oQuotations Documents object that represents a draft of sales quotation document. 23
    oIncomingPayments Payments object. 24
    oJournalVouchers JournalVouchers object. 28
    oJournalEntries JournalEntries object that represents a normal journal entry. 30
    oStockTakings StockTaking object. 31
    oContacts Contacts object. 33
    oCreditCards CreditCards Object 36
    oCurrencyCodes Currencies object. 37
    oPaymentTermsTypes PaymentTermsTypes object. 40
    oBankPages BankPages object. 42
    oManufacturers Manufacturers 43
    oVendorPayments Payments object that represents payments to vendors. 46
    oLandedCostsCodes LandedCostsCodes 48
    oShippingTypes ShippingTypes 49
    oLengthMeasures LengthMeasures 50
    oWeightMeasures WeightMeasures 51
    oItemGroups ItemGroups object. 52
    oSalesPersons SalesPersons 53
    oCustomsGroups CustomsGroups 56
    oChecksforPayment ChecksforPayment object. 57
    oInventoryGenEntry Documents object that is used to enter general items to the inventory. 59
    oInventoryGenExit Documents object that is used to exit general items from inventory. 60
    oWarehouses Warehouses object. 64
    oCommissionGroups CommissionGroups 65
    oProductTrees ProductTrees object. 66
    oStockTransfer StockTransfer object. 67
    oWorkOrders WorkOrders object. 68
    oCreditPaymentMethods CreditPaymentMethods 70
    oCreditCardPayments CreditCardPayments 71
    oAlternateCatNum AlternateCatNum object. 73
    oBudget Budget object. 77
    oBudgetDistribution BudgetDistribution object. 78
    oMessages Messages object. 81
    oBudgetScenarios BudgetScenarios object. 91
    oSalesOpportunities SalesOpportunities object. 97
    oUserDefaultGroups UserDefaultGroups 93
    oSalesStages SalesStages 101
    oActivityTypes ActivityTypes object. 103
    oActivityLocations ActivityLocations object. 104
    oDrafts Documents object that represents a draft document (see Creating a draft document sample). 112
    oDeductionTaxHierarchies DeductionTaxHierarchies object. 116
    oDeductionTaxGroups DeductionTaxGroups object. 117
    oAdditionalExpenses AdditionalExpenses object. 125
    oSalesTaxAuthorities SalesTaxAuthorities object. 126
    oSalesTaxAuthoritiesTypes SalesTaxAuthoritiesTypes object. 127
    oSalesTaxCodes SalesTaxCodes object. 128
    oQueryCategories QueryCategories object. 134
    oFactoringIndicators object. FactoringIndicators 138
    oPaymentsDrafts Payments object. 140
    oAccountSegmentations AccountSegmentations object. 142
    oAccountSegmentationCategories AccountSegmentationCategories object. 143
    oWarehouseLocations WarehouseLocations object. 144
    oForms1099 Forms1099 object. 145
    oInventoryCycles InventoryCycles object. 146
    oWizardPaymentMethods WizardPaymentMethods object. 147
    oBPPriorities BPPriorities object. 150
    oDunningLetters DunningLetters object. 151
    oUserFields UserFieldsMD object. 152
    oUserTables UserTablesMD object. 153
    oPickLists PickLists object. 156
    oPaymentRunExport PaymentRunExport object. 158
    oUserQueries UserQueries object. 160
    oMaterialRevaluation MaterialRevaluation object. 162
    oCorrectionPurchaseInvoice Documents object that represents a draft of purchase invoice correction document. 163
    oCorrectionPurchaseInvoiceReversal Documents object that represents a draft of reverse purchase invoice correction document. 164
    oCorrectionInvoice Documents object that represents a draft of correction invoice document. 165
    oCorrectionInvoiceReversal Documents object that represents a draft of reverse invoice correction document. 166
    oContractTemplates ContractTemplates object. 170
    oEmployeesInfo EmployeesInfo object. 171
    oCustomerEquipmentCards CustomerEquipmentCards object. 176
    oWithholdingTaxCodes WithholdingTaxCodes object. 178
    oBillOfExchangeTransactions BillOfExchangeTransaction object. 182
    oKnowledgeBaseSolutions KnowledgeBaseSolutions object. 189
    oServiceContracts ServiceContracts object. 190
    oServiceCalls ServiceCalls object. 191
    oUserKeys UserKeysMD object. 193
    oQueue Queue object. 194
    oSalesForecast SalesForecast object. 198
    oTerritories Territories object. 200
    oIndustries Industries object. 201
    oProductionOrders ProductionOrders object. 202
    oPackagesTypes PackagesTypes object. 205
    oUserObjectsMD UserObjectsMD object. 206
    oTeams Teams object. 211
    oRelationships Relationships object. 212
    oUserPermissionTree UserPermissionTree object. 214
    oActivityStatus ActivityStatus object. 217
    oChooseFromList ChooseFromList object. 218
    oFormattedSearches FormattedSearches object. 219
    oAttachments2 Attachments2 object. 221
    oUserLanguages UserLanguages object. 223
    oMultiLanguageTranslations MultiLanguageTranslations object. 224
    oDynamicSystemStrings DynamicSystemStrings object. 229
    oHouseBankAccounts HouseBankAccounts object. 231
    oBusinessPlaces BusinessPlaces object. 247
    oLocalEra LocalEra object. 250
    oSalesTaxInvoice Sales tax invoice. See TaxInvoices object and DocType property with the valid value botit_Invoice. 280
    oPurchaseTaxInvoice Purchase tax invoice. See TaxInvoices object and DocType property with the valid value botit_Payment. 281
    BoRecordset Recordset object. 300
    BoBridge SBObob object. 305
    oNotaFiscalUsage NotaFiscalUsage object. 260
    oNotaFiscalCFOP NotaFiscalCFOP object. 258
    oNotaFiscalCST NotaFiscalCST object. 259
    oClosingDateProcedure ClosingDateProcedure object. 261
    oBusinessPartnerGroups object. 10
    oBPFiscalRegistryID BPFiscalRegistryID object.
    Pls give Feedback
    N.Mohamed Zubair

  • FM for Change Documents For User

    Hi all,
    We need a Function Module for tracking the changes of a user account. Is there any function encapsulating the functionality supplied by SU01 -> Information -> Change Documents for User?
    thanks,
    - ferudun

    Hi
        Try this BAPIs
    BAPI_USER_LOCPROFILES_READ
    BAPI_USER_GET_DETAIL
    Regards
    Bala Krishna

  • Hide a library object from all but selected users

    Perhaps I just missed this in the documentation, but is there a way to hide
    a library object from all but selected users who will have access to the
    docs in that library. I know I can uncheck access rights and assign them
    only for selected users who can access the documents, but I would like to
    hide the ibrary object as well, best that only those who have access even
    know the library exisits in this case. Thanks.

    PatM wrote:
    > Thanks to all for your comments and confirmation--I think this is worthy of
    > an enhancement request, and I will put one in. Anyone else who thinks it is
    > a good idea, your support is appreciated. In the case of a library for
    > something like the human resource or finance department, I think it is
    > pretty important, as one cannot rely on an individual user to set the rights
    > correctly for just those documents in the real world of the work-a-day rush.
    How do you give this support? This is a real issue with us as we
    generate information that affects the price and "tradeability" of public
    companies.
    If it's only moral support -- you got it.
    If you have to "vote" on these issues -- how?
    > "Dave Parkes" <[email protected]> wrote in message
    > news:[email protected]..
    >> If there is, I don't know of it. Removing all the rights is as far as you
    >> can go I think.
    >>
    >> I'd probably still just use document rights within a single library. If
    >> these people who can access this library don't have their default set to
    >> it, then things will end up in the wrong place anyway. Not a fan of
    >> multiple active libraries, docs are inevitably in the wrong one <g>
    >>
    >> Cheers Dave
    >>
    >>
    >> --
    >> Dave Parkes [NSCS]
    >> Occasionally resident at http://support-forums.novell.com/
    >
    >
    Will R
    PMC Consulting

  • Maintain Documents on User (Transaction CRM_KW) in new CRM2007 WebUI

    Hi All,
    We are working with CRM 2007 WebUI and I would like to give the users the possibility to view their own documents. In old SAP GUI this was (and still is) possible via the transaction CRM_KW. We have set up content management and everything correctly, that is working fine, I do see some documents for users when I go into that transaction.
    Now without using transaction launcher, is there a component/logical link/assignment block somewhere to get this functionality in WebUI?
    Thanks for help
    Alex

    Have you executed a trace while a functional user executes the transaction code for the specific parameters? (i.e. document type). The trace will then show which objects are being checked; then look at the object documentation in txn Su21 to determine if there are any ways to restrict on the particular value; in some cases, if the authorization group field is being checked, additional configuration is needed in order to implement the security (Su21 will explain in detail for the particular object).

  • Any example documents on user exits

    Hi All,
    Can anybody send me some example documents on user exits and sample codes. Also let me know what is the diff in 4.7 ee version user exits and ealrier version exits. It seems there is few diff between latest version and earlier versions on user exits,please let me know. Thanks in advance.

    hi Vishal,
    U can check all these below links also
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    FAQ's
    http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
    http://www.easymarketplace.de/userexit.php
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    1. what is the defference between enhancement and user-exits?
    http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
    Re: difference between user exits & customer exits
    Some Questions ! Plz help...
    http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
    2. Difference between CMOD and SMOD?
    http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
    http://www.sap-img.com/abap.htm
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
    http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
    check these links..
    http://www.sapgenie.com/abap/tips_and_tricks.htm
    http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    passing selet-option variable to subrouine...
    Regards,
    Naveen

Maybe you are looking for