All Driver links on T400 driver matrix page show "No available downloads"
Went to the Lenovo Support & Downloads page and followed the links until I got to the matrix for the T400 (Drivers and software - ThinkPad R400, R500 and T400). Each type (BIOS, Network Drivers, ...) has the text "No available downloads" in the space for "File link". Something wrong with this service today?
Confirmed here. Scary.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Similar Messages
-
Since I have a new iMac and now use Mountain Lion, I am observing that TV shows purchased in iTunes sometimes download in a Quicktime format that will not open in iTunes. In some but not all cases, I right click "open in" and select iTunes and then it will play. However, this doesn't always work. When I open in Quicktime and try to export to iTunes, that won't work. When I try Wundershare's Video conversation program, it won't even accept the file. What's going on here? Any ideas? Please reply [email protected] with any suggestions.
KathyThanks for the help Ricky.
I did put my iPod into DFU and iTunes recognized it in restore mode. After restore I am back where I was before - iTunes cannot connect because of an unknown error.
I have installed Jailbreak to see if I can bypass itunes but haven't succeeded. I can't get my computer to recopgnize the iPod as a device.
I'll take it to a Genius bar next time I am in the area of one. Until then I'll probably continue to try hacks to get it connected.
Dan -
Model 15-d006TU all driver link for windows 7
plz plz plz
model 15-d006TU all driver link for windows 7Hi:
I have already answered your question yesterday.
http://h30434.www3.hp.com/t5/Other-Desktop-PC-Questions/32-bit-driver-for-windows-7/m-p/3481621
Your notebook is not supported by HP for windows 7 32 bit.
You have to use drivers from other notebooks and manufacturers websites.
If those drivers don't work, then you need to install W7 64 bit.
Asking the same question every day will get you absolutely nowhere. -
I have an installation CD Adobe Acrobat 9 Pro with teh Serial No/key. Now I bought a tablet that has now CD drive. So I tried to download the Acrobat 9 Pro from the Adobe hoempage, but failed. I can only find the link to something like an extended version. So how do I have to proceed , where can I find the proper link. My system has W 8.1 32 Bit.
Try the download below...
You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html -
Last sunday i install a window 8 and this window format my all drive & make it 1 drive (DRIVE C). Before all of this i have 5 drive in different size with 1 Bitlocker protect drive.
So i try data recovery software to recover my data. i got back all my data without that ( bitlocker ) protected drive.
so please guys help me how can i get back data from bitlocker protected drives.
please please help me.Hi,
I sorry for your experience, but there is no way to recovery the data encryped by BitLocker untill now.
BitLocker is designed to make the encrypted drive unrecoverable without the required authentication. When in recovery mode, the user needs the recovery password or recovery key to unlock the encrypted drive. Therefore, we highly recommend
that you store the recovery information in AD DS or in another safe location.
Please refer to the link below for the statement:
http://technet.microsoft.com/de-de/library/ee449438(v=ws.10).aspx#BKMK_RecoveryInfo
Roger Lu
TechNet Community Support -
right forum? first time here. none of the options seem perfect. so i guess this applies to 'setup.' i tried to describe what's happening verbosely from the start of a file transfer to completion of writing file to 2nd hard drive.
win 7 64bit home - i2600k 3.4ghz - 8gb of ram - 2hdd 1 ssd
I have this problem when transferring files between 2 internal hard drives. one is unhealthy (slow write speeds but not looking for advice to replace it because it serves its unimportant purpose). so, the unhealthy drive drops into PIO mode - that's acceptable.
however, a little over 1gb of any file transfer is cached in RAM during the file transfer. after the file transfer window closes, indicating the transfer is "complete" (HA!), it still has 1gb to write from RAM which takes about 30minutes. This would
not be a problem if it did not also earmark an additional 5gb of ram (never in use), leaving 1gb or less 'free' for programs. this needlessly causes my pc to be sluggish - moreso than a typical file transfer file between 2 healthy drives. i have windows write
caching turned off on all drives. so this is a different setting i can't figure out nor find after 2 hours of google searches.
info from taskmanager and resource monitor.
idle estimates: total 8175, cached 532, available 7218, free 6771 and the graph in taskman shows about 1gb memory in use.
at the start of a file transfer: 8175, 2661, 6070, 4511free and ~2gb of ram used in graph. No problems, yet.
however, as the transfer goes on, the free ram value drops to less than 1gb (1gb normal +1gb temporary transfer cache +5gb of unused earmarked space = ~7gb), cached value increases, but the amount of used ram remains relatively unchanged (2gb
during transfer and slowly drops to idle values as remaining bits are written to the 2nd hard drive). the free value is even slower to return to idle norms after the transfer completes writing data to 2nd hard drive from RAM. so, it's earmarking an addition
5gb of ram that are completely unused during this process. *****This is my problem*****
Is there any way to turn this function off or limit its maximum size. in addition to sluggishness, it poses risk to data integrity from system errors/power loss, and it's difficult to discern the actual time of transfer completion, which makes it difficult
to know when it's safe to shutdown my pc (any data left in ram is lost, and the file transfer is ruined - as of now i have to use resmon and look through what's writing to disk2 -> sometimes easy to forget about it when the transfer window closed 20-30minutes
ago and the file is still in the process of writing to the 2nd disk).
Any solution would be nice, and a little extra info like whether it can be applied to only 1 hard drive would be excellent.Thanks for the reply.
(Although i have an undergrad degeee in computers, it's been 15years and my vocab is terrible. so, i will try my best. keep an open mind. it's not my occupation, so i rarely have to communicate ideas regarding PCs)
It operates the same way regardless of the write-cache option being enabled. It's not using the 5gb for read/write buffer - it's merely bloating standby memory during the transfer process at a rate similar to the write speed of destination (for my situation).
at this point i don't expect a solution. i've tried to look through lists of known memory leaks but i dont have the vocabulary to be 100% certain this problem is not documented. as of now it can't affect many people - NAS's with low bandwidth networks, usb
attached storage etc. do bugs get forwarded from these forums? below i can outline the consistent and repeatable nature not only on my pc but on others' pcs as well (2012 forum post i found).
I've been testing and paying a little more attention and i can describe it better:
Just the Facts
Resmon Memory Info: "In Use" stays consistent ~1gb (idle amount and roughly the same when nothing else is running during file transfer)
"Modified" contains file transfer
data (meta data?) which remains consistent at little over 1gb (minor fluctuations due to working as a buffer). After the file transfer window closes "Modified" slowly diminishes as it finishes lazy writing (i believe that's the term). I forget idle
pc amount, but after transfer this is ony 58mb)
"Standby" as the transfer starts it immediately rises to ~2gb. I'm sure this initial jump is normal. However, it will bloat well over 5gb over time with a large enough transfer increasing at a consistent rate during the entire transfer
process. the crux of the matter.
"Free" will drop as far as 35-50megabytes over time.
as the transfer starts, the "Standby" increases by an immediate chunk then at a slow rate throughout entire transfer process(~1mb/s). once writing metadata to RAM no longer occurs, the "Modified" ram slowly (@500kb/s matching resmon disk
activity for that file write) diminishes as it finishes lazy writing, After file is 100% written to destination drive, "Standby" remains a bloated figure long after.
a 1.4gb transfer filled 3677MB of "Standby" by the time writing finished and modified ram cleared. after 20minutes, it's still bloated at 3696MB. after 30-40mins it's down to 2300mb - this is about what it jumps immediately to when transfer starts
- it now remains at this level until i reboot.
I notice the "standby" is available to programs. but they do not operate well. e.g. a 480p trailer on IMDB.com will stop-and-go every 2-3seconds (stream buffers fine/fast) - this would be during the worst case scenario of 35-50mb "Free"
ram. my pc isn't and never was the latest and greatest, but choppy video never happens even with 1 or 2 resource hogs running (video processing/encoding, games, etc).
Conjecture Below
i think it's a problem when one device is significantly slower at writing than the source device - this is the factor that i share with others having this problem. when data is written to modified ram then sent to destination, standby memory is expanded
until it completely or nearly fills all available RAM - If the transfer size is large enough relative to how slow the write speed of destination device is. otherwise it fills it up as much as the file size/write speed issue allows. the term "memory leak"
is used below but may not technically be one, but it's an apt description in layman's terms.
i saw a similar post in these forums (link at end). My problem is repeatable and consistent with others' reports. I wasn't sure if i should revive it with a reply. some of these online message boards (maybe not this one) are extremely picky
and sensitive, lol.the world will end if an old thread revives - even if for a good reason.
i can answer some of the ancillary issues. one person (Friday, September 21, 2012 8:33 PM) mentions not being able to shutdown, i asume he means stuck on the shutdown screen - this is because lazy writing has not completed - his nas write speed is significantly
slower than reading from source - the last bits of data left in ram still needs to be writen to the destination. shutdown will stall for as long as needed until the data finishes writing to destination to prevent data loss.
another person (Monday, September 24, 2012 6:31 PM) mentions the rate of the leak, but the rate is more likely a function of read speed from source relative to write speed of destination. which explains why my standby expands closer to a 1:1 ratio compared
to his 1:100 (he said 10mb per 1000mb)
we all have the same exact results/behaviour, but slightly different rates of bloating/leaking. as the file is written from from the ram to the destination, standby increases during this time - not a problem if read and write speeds are roughly equal (unless
your transfering a terabytes then i bet the problem could rear its head). when writing lags, it gives the opportunity for standby ram to bloat with no maximum except the amount of installed ram. slower the write speed, the worse the problem.
The reply on Wednesday, September 26, 2012 3:04 AM has before and after pictures of exactly what i described in
"Just the Facts". Specifically the resmon image showing the Memory Tab.
The kb2647452 hotfix seems to do some weird things relative to this problem. in the posts that mention they've applied it: after file completes it looks like the "standby" bloat is now "in use" bloat. as per info from Tuesday, October
09, 2012 10:36 PM - bobmtl in an earlier post applies the patch. compare images from earlier posts to his post on this date. seems like a worse problem. Also, his process list indicates it's very unlikely they add up to ~4gb as listed in the color coded bar.
wheres the extra gb's coming from? likely the same culprit of what filled up "standby" memory for me and others. it looks like this patch relative to this problem merely recategorizes the bloat - just changes the title it falls under.
Link:
https://social.technet.microsoft.com/Forums/windows/en-US/955b600f-976d-4c09-86dc-2ff19e726baf/memory-leak-in-windows-7-64bit-when-writing-to-a-network-shared-disk?forum=w7itpronetworking -
All driver for Hp Pavilion 15-n213sx windows 7&8.1
please All driver for Hp Pavilion 15-n213sx windows 7&8.1
This question was solved.
View Solution.HP is providing a limited number of Windows 7 drivers and the full assortment of Windows 8.1 drivers on the HP Pavilion 15-n213sx Notebook PC Drivers page.
Please post (just the text) the Windows Device Manager's "Hardware Ids" for all remaining missing or unknown devices, as shown in the example below;
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
Making all Drives visible in iMovie10 Library
I wish to transfer an iMovie 10 event onto an external hard drive connected to my Mac. The External drive (Formatted for Mac) and the Macs internal drive are not showing in the left hand column where the libraries are. How do I make them visible.
The drives do not show in iMovie 10. The storage model is completely different (and more flexible).
To move events from a library to a new library, create a new library (File - Open Library - New) and specify its name and location. Then select and copy to it all the events and projects you want to put in it This way you won't break any links to external media.
Alternatively to move a whole library, selct the library in the libraries pane go File - Consolidate Library media (this ensures that any external media are copied to the library package). You can then move this library to its new location using Finder. iMovie won't find it by itself - the first time you want to open it you will ahve to File - Open Library - Other and navigate to its new location.
I hope this helps
Geoff. -
MOVED: [VIA] want all driver for ms5187 ver.1 Plz
This topic has been moved to Retired motherboards.
[VIA] want all driver for ms5187 ver.1 PlzQuote from: Grayone on 08-December-05, 04:30:27
Sorry I did not notice the driver section grayed out. Here is a link to the motherboard's via chipset drivers. They have them broken down by operating systems.
http://www.viaarena.com/?PageID=2
Thx -
Thinkserver RD650 & 720ix RAID - How to get all drives showing up in TDM ??
Hi, Have just received an RD650 with a 720ix controller. The chasis I have is the one where it provides a hybrid of disk form factors. So at the front left of the server it first has 6 x 2.5" bays, and then 3 x 3.5" bays, that makes up the first half of the backplane. Then the rest of the front of the server and the other half of the back plane is populated by 6 x 3.5" bays. I have 6 hard drives in total: 2 x 300GB 2.5" 15k SAS and 4 x 3TB 3.5" 7.2k SAS. However, when I go into storage management in the TDM, the drive count is only 5 and I do not get the option to include all 4 of my 3.5" drives into a virtual drive, I only get the option of including 3. So the last 3.5" drive that is on the right hand side of the server and backplane is not showing as available. Now I know this controller supports up to 32 drives, so what do I need to do to get this to show up as an available drive? I'll post an image here as well, the green outlines are my drives which ARE available, the red box is my one 3.5" drive which is NOT showing as available (all lights are on and drive seems to be working normally, if I swap that drive for another I still just get the same, 3 of the 3.5 drives available instead of all 4). I would REALLY appreciate some help with this, I need that drive showing up for RAID10 or this server goes back! Thank you,LD.
Yeah sorry I meant to update this sooner, it was a dead drive, I thought I had checked it in other bays properly but obviously not. This server only has 2 usb ports! Crazy, so if you are flshing a firmware or loading a driverbundle or whatever into the TDM but USB, you have to take out either the keyboard or mouse, what genius decided this? All servers should have at least 3 USB ports, whether you are going to run them headless eventually or not. Also, ALL of the 4 3.5" drive caddies are cracked and broken where the screw attaches the plastic front part to the metal! This must have been done in the factory AND one of the sprung screws that holds the raid card down is snapped! Anyway, original problem is solved.
-
I've recently noticed that since the last upgrade any links to pdf files on websited no longer work. All I get is a blank white page or a blank black page when I click on these links. Can I fix this?
YAY!! I have Safe mode!!
um, now what? -
LR 2.6 Windows 7 64 bit - not all drives listed in browse
I am using Lightroom 2.6 on Windows 7 Ultimate 64 bit, and I have found an annoying issue -
the browse for files or folders dialog that comes up when I need to choose location for my raw files imported as .dng does not list all hard drives of my computer - it only lists contents of my user folder in drive C:/ - thus making it impossible for me to choose any other location than those within my user folder.
I attach two screenshots - 1/ Normal browse for folders dialog as it appears from within Windows explorer.
2/ Same dialog as invoked by Lightroom - with all drives missing.
Is that a bug or am I missing something?Do you have the "Computer" icon on your desktop ?
To get it there:
http://www.howtogeek.com/howto/windows-vista/display-my-computer-icon-on-the-desktop-in-wi ndows-vista/
Hope this helps.
Frans -
When i plug my ipod in, it shows up on desktop as a hard drive, but wont show up on itunes. All my music/videos everything has been wiped off somehow, restored it and still wont work! Please help!
- Have you tried the troubleshooting here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
- You can try disabling the camer notification
http://support.apple.com/kb/TS1500
- Do you have any camera, scanner or similar software installed? That may prevent iTunes from seeing the iPod. -
Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens. I partitioned my hard drive and I tried installing Microsoft windows and that worked just fine. But I do not understand why it wont install mac os x 10.5????? PLEASE HELP ME. Thanks Hamid
Try a new post in the 10.5 Installation forum.
DALE -
After a hard-drive crash, Pages application was brought over from the old hard drive, and upgraded to snow leopard. However, Pages would not launch. I do not have the disks and the computer was given to me by my son with iWork 08 installed, so I do not have the ability to re-install using Purchases. I re-installed the update 3.0.3, which I already had, but thought it worth a try. That enabled Pages to launch, but it will not open a new or old document. I can see in preview the document, but it will not open. Any suggestions besides repurchasing Pages. I've just put out a lot of money for a new hard drive and retrieval of apps and docs from the old hard drive and would like not to have to put more money in it.
Thanks for any suggestions.You can not simply drag over Pages, particularly if it was perhaps damaged in a crash.
As it was only Pages '08 it may be time to upgrade to Pages '09 from the App Store. It is not that expensive and will allow you to install it on any Mac sharing the same Apple I.D. and protect you from a repeat of this problem.
There are free alternatives to Pages if you are hard strapped, it depends on what you are using Pages for, it is not the only option by far.
Peter
Maybe you are looking for
-
What questions do I need to ask the IT department?
My employer recently set up wireless access for our whole campus, and I'd like to be able to connect to it with my MacBook. This isn't a hack job - I'm fully authorized to access the network. My problem is just that when I called the Help Desk to ask
-
Call log is blank - Palm Centro AT&T
My Centro is not storing any of the calls I receive or make in my call log. Help! Post relates to: Centro (AT&T)
-
Creating collages for printing.
Hi I'm new to Photoshop. My daughter gave me Elements 8 ages ago and I have only just downloaded it (was afraid to do so in case it pulled all my thousands of photos from my Windows Photo Pictures in their unedited form (as Picasa did to me ages ago)
-
Firefox nightly doesn't use any file associations on downloaded files
I am using Firefox 8.0a with Gnome 3 and Shell. Chromium will open any downloaded files with the correct applications, but Firefox always asks me to locate an application to open a file with. Rather than searching through for all the correct binaries
-
How can the email address be changed in iCloud My grand daughter us my iTunes account now I am getting her streams on on iPad and iPhone .