All drums record, only closed hi hat plays back.

When I play live drums using my new Univox electronic drums through USB to a software instrument track, accessing an Ultrabeat kit, I can hear all drums while recording and see all midi notes in the piano roll but only the closed hi hat plays back. I never had this problem with my Alesis Control Pad. Any idea why this is happening and how to fix it? The Univox pads have controls for midi 'voice', 'volume' and 'note' only. The Alesis has a control for midi channel so I thought this may be the problem but it still occurs when I select 'all midi channels' for the input and in any case, all the midi notes appear to be recorded, based on the piano roll. They just don't play back, except the closed hi hat. I'm using Logic Express 8 on a G5 dual.

The problem was a bad connection with a phono plug.
I had the problem with iTunes, got both channels with another audio editor, and came back to iTunes, with only one channel.
The sneaky phono plug got me thinking it was a problem with the the iTunes update.
Cheers
Mike

Similar Messages

I cannot find information to help me change the orientation of a video filmed in portrait format but only able to be played back lying on its side (landscape) instead of upright. All the rotation buttons for iPhoto are not 'engaged' when it is in video .

I cannot find information to help me change the orientation of a video filmed in portrait format but it can only able to be played back lying on its side (landscape) instead of upright. All the rotation buttons for iPhoto are not 'engaged' when it is in video .

Thanks OT,
I tried the Export function but it would not allow me to choose the option of exporting to iMovie. I think you are right about needing Quicktime Pro. I opened iMovie and imported the clip from iPhoto and with some searching found the 'cropping, rotation' mechanism. So I now have a copy in the correct orientation. I plan to import/export it back to iPhoto because I want to have a copy on my iPhone to show people and I wanted to have it available as part of a slideshow I am making in iPhoto of my recent overseas trip. It is a pain that there is no simple orientating tool for the movie clips downloaded to iPhoto with the photos from the one camera.

CS4: Why do I have Lag on only 1920 1080 video play back??

Hi,
I currently record with a Sanyo Xacti HD2000, at 1920x1080 30fps SHQ resolution. Whenever I play the clips on the camera or Nero Essential 8 on my computer there is no lag problems. However the moment I upload a clip onto Premiere Pro CS4 with this resolution I have severe lag on the play back from the Premiere video screen. I've recorded on 1280x 720 and 640x480 on the camera too and the play back is completley fine with no lag what so ever, just the moment Full HD clips are imported do I get any lag. I don't think it's because my computer can't handle it either as it has in it Core 2 Duo processor, 3GB of Ram and an Overclocked 1GB Geforce 8600 GTS Graphics Card. The only thing I'm not sure about is what Presets I should be using for my footage as this might be the problem.
If ANYONE can help I'd seriously appreciate it, you can email me a [email protected] If you want to further questions about anything you may feel may help you guys helping me or just to communicate to me faster;
Thank you sooo much!!!

Hi,
I dont think the gpu of your graphics overclocked card is used at all in the cs4 environment...thats more for gaming stuff.
so you can rule that out as a "plus"
The 3 gig ram is kinda anemic...low power...every gig helps...so 4 would be better...think about it...the OS alone uses a lot of ram..
the power requirements that adobe says you need to run the program is on the low end of requirements...and you are maxing things out playing with real high HD stuff.
everything else is a question of how you set up your hard drives and raid array and so on to deal with editing in general ( there are hardware threads about how to set that up best....scratch disk and so on...cache...)
plus you might have a red bar above your timeline indicating it should be "rendered" for smoother playback...and that has an effect too.

Logic Pro 8 mutes newly recorded tracks and won't play back until reload...

Seems like this has happened within the last couple of months. When I record audio in Logic and try to play it back, it won't play the audio. The arrange window shows it is there and the regions do NOT show that they are muted (nor does the channel strip). In essence, it acts as if it is muted, but there are no signs that it is. (I even select the regions and mute then unmute them, and mute and unmute the channel strip, but nothing changes. Still no audio.)
So I have to close the project and reopen it. When I reopen it, every region in the previous recording session (audio) is greyed out (muted) in the arrange window. Once I select them and unmute them, they play back perfectly.
This is a very weird situation. Anybody have any ideas about what the issue is?
Thank you!

A lot of people have reported this, and it happens to me pretty frequently. Gotta be a known bug, but of course since Apple is always mum about this stuff with absolutely no communication to its customers, we won't know until the next version of Logic is released.

All of a sudden I dont get play back on my Itunes

I am getting this error when I open Itunes
"iTunes has detected a problem with your audio configuartion. Audio/Video playback may not operate properly"
What is wrong?
This just happened out of nowhere. I've never had any issues before this

make sure you have signed in to your messages options on the iphone with the same apple ID, if already done, then try a reset all settings..
good luck !

I downloaded quick voice on my iphone. I have something recorded that I want to play back on my computer. Is there a way to do this?

I have Quick Voice on my iphone 4. I recorded something that I want to save to my computer. Is there a way to do this?

Check to see if Quick Voice is available on File Sharing.
http://support.apple.com/kb/HT4094 <- Even though its for the ipad it still applies to iPhone

DVD Recorder Play Back of JPEG Images enhanced using PSE 2.0

I recently purchased a HDD DVD Recorder but am having difficulty playing back JPEG still photo images contained in CD-Rs produced on a PC (Operating system XP SP2). Images are all collectively revealed in thumbnail form in the Picture View but only those individual images that have NOT been PSE 2.0 enhanced (e.g. improved contrast, cloning etc.) can be expanded to full screen view. In the case of the others, the following message is displayed : Can not be played on this unit. All images play back successfully on DVD/ CD drives of original PC.
The only solution I have found is to open & save to MS Paint (stripping out hidden data ??) before burning to CD. However, this is laborious and reduces resolution.
Any other suggestions welcomed.

Hi Malcom,
You can export as new file from Organizer and then use those new images to burn to disc.
-Anks

Audio Instr records but does not play back in Logic Pro 9

Hi all.... recently upgraded from a PPC G5 to an iMac 27"" 2.8 GHz Intel i7 w/4GB mem. was running Logic 7.2,now Pro 9. Here's my prob. After opening an old session in LP9 and recording an audio instrmnt (no prob setting up trk or recording) the trk won't play back. However,I was able to drag the recorded region to another trk (set up w/same audio instrmnt) and it plays.Is there some possibility that when opening a Logic 7.2 session that LP9 sees an audio instrmnr trk as an "audio"trk instead? Since I'm relatively new please excuse any newbie faults. Any help is greatly appreciated.
-Ronnie-

Hi all.... recently upgraded from a PPC G5 to an iMac 27"" 2.8 GHz Intel i7 w/4GB mem. was running Logic 7.2,now Pro 9. Here's my prob. After opening an old session in LP9 and recording an audio instrmnt (no prob setting up trk or recording) the trk won't play back. However,I was able to drag the recorded region to another trk (set up w/same audio instrmnt) and it plays.Is there some possibility that when opening a Logic 7.2 session that LP9 sees an audio instrmnr trk as an "audio"trk instead? Since I'm relatively new please excuse any newbie faults. Any help is greatly appreciated.
-Ronnie-

Cannot hear input when recording or playing back a track

Frustrating problem which I am sure is simple to fix -
When not recording or playing back a recorded track in Adobe 3.0, I can hear my keyboard fine through my soundcard line in. However, when I record a track, I cannot hear it any more (though it is being recorded, and I can hear it on playback of the recorded track).
Also, when playing back a recorded track, I cannot hear my keyboard input again. Only when I stop the playback can I hear it.
Obviously I need to hear what I am playing as I am recording, and also want to play along to recorded tracks.
And when I enable "monitor input level" then the level bar indicates sound, but again I hear nothing.
My setup: Korg Triton Studio connecting via Line in to Creative Soundblaster X-Fi soundcard on Windows Vista PC.
Many thanks in advance !!
Dan

Thanks for reply - when I do as above, then I can hear the track I am playing as I am recording it. I still cannot hear it however when I am just playing along to a pre-recorded track.
Also, with smart input, there is a small delay between pressing the key and hearing the sound which I do not like.
Any ideas?

Recording and playing back

Hi, I have question about recording and playing back.
I am going to record by AudioQueue and to play back by MPMoviePlayerController.
My code can record by AudioQueue.
But, It can not record After playing back by MPMoviePlayerController.
Is Anyone who had same problem and solved it.
Please tell me resolution method.

Hi
Welcome to Apple Discussions.
We don't get very many questions about Core Audio here so if you don't get any response, you can try the Apple emailing list for Core Audio:
[email protected]
The list is very friendly and I'm sure someone there will be able to answer your question.
Bob

Unable to play back real instrument tracks

greetings - i've been working on a song in Garage Band for a couple of years. the back story is that this file has grown to 2.5GB in size (all my other GB files are a lot less). it has about 10 real instrument tracks and 6 software tracks. Yesterday while working on the file a strange thing started happening; the first (of 3) software piano track started playing back intermittently with a bunch of reverb; i had not requested that it have reverb. i tried removing reverb, i tried soloing and unsoloing, muting and unmuting, and sometimes that would get rid of the reverb. so that was anomaly #1 yesterday. Finally, after finishing the session and saving/ closing the file, i wanted to make a backup copy so did command-D. Possible anomaly #2: when the original file and the backup file names appeared in the window, i renamed both; then i realized that the Mac was still in the process of copying the file; so i don't know if that renaming introduced a problem. Once the backup was finished, i opened the file (and the backup file, subsequently), and the REAL instrument tracks (plus the first midi piano track i laid down) NO LONGER MAKE ANY SOUND. the software drums, flute, and pianos 2&3 play back; the vocal sounds like the reverb is playing back but not the original track (i assigned basic female reverb to the vocal track). Everything visually still seems to be present in the file - all the details of instrument, level, pan, etc. but i'm getting no sound from the real instrument tracks or the 1st software piano track. i have TRIED all the suggestions for optimizing performance given in GB help. i am stuck and truly hope my arrangement will once again sound! many thanks in advance for any suggestions; Matthew Allen
<Email Edited By Host>

guitarworld wrote:
the first (of 3) software piano track started playing back intermittently with a bunch of reverb;
try toggling the Ducking menuItem, that's solved some similar issues
(and you can safely ignore the post about 8 tracks, it's not relevant)

Logic wont play back audio regions under certain tracks.

Hello! I am rearranging my audio files (throwing them all to my secondary hard drive, where I record to ). I did this, and now certain audio files to do not play back in my logic projects, but there is no warning that says the file cannot be found--which is what I am used to happening. At that point I would either hit the Search button, or the Manually Find button. Instead, the region appears as per usual, just with nothing playing back. I know I could import the audio back into my projects manually--which would be fine for those that start at a specific, clean-cut time, but what about all those spliced and diced regions that are cut up and laid out all over the place!?
I discovered new details to the weirdness . . .
It seems, in the few projects that I relocated audio, that the affected regions cannot be played back unless I move them to another audio track. What??? For example, the vocal track in one song, which is all set up with its plugins and such as Audio Track 2, will produce no sound unless I drag it to another audio track, say Audio Track 3 or 4. It is bonkers!! What the heck is that about?
This is what happened in all of the projects affected by my source audio rearrangement. Sure, I could easily just copy my channel strip settings to a new track, relocate my audio region to it, and hope all goes well thereforth, but I would much rather get to the root of this oddity so it doesn't somehow buck me later.
What do you think it could be?
Oh yea, in one of the projects, all the other audio tracks seem to play back fine, except for the recorded bass track. Okay, so just to check, I drag the bass audio to another track--yep, it does play back. But I realized that the track that held the bass region (Track 4) is actually playing back the vocals (which are also playing back normally in their intended track). I initially didn't notice the extra vocals underneath my normal vocals track, with their low-key bass plug-in settings. Funny thing is, there isn't even a region on Track 4 any more! How is it playing anything back at all?? Not that it makes any more sense that it would be playing back vocals with a bass region.
Also, the fact that Logic Pro keeps quitting unexpectedly does not inspire much confidence. This has just been lately, and I've only been playing with these projects lately, trying to figure this out.
Is my Logic haunted? =(
I welcome any and all objective suggestions! I am feeling just the slightest bit overwhelmed by this odd behavior.
Thanks!
(i checked, but did not see that the tracks were muted in anyway, including the region itself)

I figured something out that might tell someone what I did to screw things up!
I think I did something to mess up the environment or something. I know this much now: When I created a new project, I created 6 new audio tracks. I noticed that a piece of previously recorded audio that I imported into the project would only play back on ever other track! I than noticed that on the every other track (that would not play back the audio when it was dragged to it), there was neither a single circle (indicating mono for the track) or the two overlapping circles (indicating stereo for the track) beneath the channel's level meter.
There must be some significance to this that I do not quite understand!
I then went back and launched several of my problematic projects to see if the tracks that would not play back audio also did not display either the mono or stereo circles on their respective channel strips. They did not! What kind of global setting did I change that would cause this?
There was one project that had one track that bared neither mono or stereo an played back its audio (Although, in this same project, there was another track that bared neither symbol that was not playing back its audio). Anyway, I noticed something that was weird to me, but will likely tell someone what the heck I must have inadvertently done to cause all of this:
When I change one audio track (that bares the mono symbol) into stereo, the next audio track (that didn't display either symbol) seems like it is combined with the previous track's output!
Very strange! Did I somehow set some global preference to split up my audio tracks across each not audio track?? If so, could someone please explain to me what and I did that? Thanks!

Video playing back choppy even in Source window

I've been working on a project for a while and wanted to back it up to a hard drive. We have an internal hard drive bay so I shut the computer down, put in a 500GB hard drive, backed up the project, shut the computer down and removed the hard drive.
Now, all of the sudden, my footage is playing back choppy. I probably shouldn't say it's playing back choppy because what happens is I'll take a raw clip, load it into the Source window start it playing and it plays fine for about 8 seconds, then it starts stuttering, the audio drops out completely and then it completely freezes up. It doesn't seem to matter what clip I'm using and all of these clips used to play back fine.
We are using a Matrox RT.X2 card and the footage is on four 500GB hard drives that are in a RAID 5 array, so I have a total of 1.5TB of space. Would defraging the drives make a difference?
I'm not sure why this has just started when nothing was added or taken away from the project.
The computer's specs are as follows:
Win XP Pro
2.66Ghz Core2 Quad
4GB Ram
GeForce 7600GT
Matrox RT.X2 Card
300GB SATA HD for Operating System
4x 500GB SATA HDs in RAID 5 array for Footage

According to the Intel Matrix Storage Console (which is the software that monitors and controls the RAID array on this motherboard, an Intel D975XBX2), the raid is working properly and is not being rebuilt.
To check and make sure the software was working properly I shut down the computer, unplugged one of the hard drives in the array and restarted the computer. The monitoring software reported that the array was missing a hard drive.
I have seen before when the array was being rebuilt. It will state this in the monitoring software. But the software is reporting all is well.
So I backed up everything and deleted the RAID array. I recreated the RAID array and was still getting the same problem. To test every time, I have a 900MB file that only takes about 20 seconds to transfer between two single SATA hard drives in the same computer. When I tried copying this to the RAID array it said it was going to take about 30-40 minutes!
I removed my boot drive and put in a spare that we had, formatted it and installed Windows XP, hoping that the problem was in the operating system. After installing the mobo drivers I tried copying the 900MB file and again it was going to take 30-40 minutes.
I deleted the RAID array and just made each of the 4 500GB hard drives a separate drive. I formatted each of them and tried copying the 900MB file to each. Each one of them only took about 20 seconds on their own to copy the file.
SO, I'm assuming that the problem is the RAID controller on the motherboard. The motherboard has an Intel ICH7R/DH SATA RAID controller. I purchased a Rosewill RC-209-EX PCI controller from Newegg.com and I'm really hoping this will fix my problems. I'm having it overnighted (which costs more than the controller itself) so I'll put it in tomorrow.
If anyone has any other suggestions, please let me know.

Link ambiguity while playing back

Oats version 12.4.0
I have two links in my page with same name,
I recorded script fine.
While playing back it is clicking same link again and again
Thanks
venkat

Hi,
Remove all unwanted attributes from XPath , say href etc. Then replace or with and in XPath. Give text attribute and index attribute in XPath. This will solve your issue for sure.
If you face any difficulties in doing this, paste code of both links here, so I can help you to modify

Hi. Quick question I am working with Panasonic GH3 footage and it is playing back in slow motion?

Hi. Quick question I am working with Panasonic GH3 footage shot using .MOV wrapper with their IPB 50mbps and All-Intra 72MBPS codecs and they are playing back in slow motion in Sg CC. The footage works fine in PP CC and I have no clue on how to fix it. Is this a bug or do I a have a setting wrong some place?

Yes it turns red this is silly PP and AE have no problem with playback for these codecs. So it is indeed Sg not handling the codec correctly and not my system?
What if I transcoded it to something else other than the previous what would you reccommend?
I was going to transcode to ProRes but 5DtoRGB does not work on Windows with GH3 codecs.
What is the correct time warp seting under clip properties? I screwed with it and forgot the default setting.
Is there a way to reset Sg back to defaults settings globaly. I tried to many settings trying to fix the playback and may have left something in the wrong state.
Thanks...

All drums record, only closed hi hat plays back.

Similar Messages

Maybe you are looking for