All end devices shown as hosts and none as Storage

We have just upgraded to ver 2.1.2e fabric manager software and it appears that FM is not recognising the difference between hosts and storage.
Is this a bug or do i need to check a box somewhere?
Never had to before so....!
Thanks
Jason

Hello Jason,
To fix this, you can select in FM Physical Attributes -> End Devices -> Hosts and then select the Enclosures tab and change the Device Type to Disk wherever appropriate. Of course, this does not explain why the issue happened in the first place so... the first thing I would check would be the way the end devices registered themselves -- please check the output of "show fcns database" and verify if they have only scsi-fcp:target listed among their fc4-type features. When you installed the FM software, did you do an upgrade, or was it a clean install? What SAN-OS version are you running on the switches?
If the devices registered only as targets, but you still see them displayed as hosts, we could be talking about a bug. Please open a TAC SR so we can track this down.

Similar Messages

I cannot receive mail on my iMac - mail is received on all other devices incl iPad, iphone, and macbook.

I do not receive e-mail on my iMac.....all other devices incl ipad, iphone, and macbook receive e-mail.

Please read the Mail Setup Assistant and trouble shoot by clicking the I want to Verify an Exisiting Account and double check your settings. If they are correct then erase the ones input and re-input them.

With new ios6 all my devices are linked message and email wise how do i seperate them?

I upgraded my iPad, and both my and my wife's phone today with the new iOS6.
Now we all are recieving eachothers messages and emails! I want all the devices seperate like they used to be in iOS5. Can I turn this linking off? I susspect it was in the initial setup after install that I linked all these devices.
Thanks

I had the same issue. With my son and my phones. We both updated to ios6 and were receiving each others text messages. We are on the same apple ID account. To correct this, I went into settings on my phone and disabled iMessage. Also, he was able to set up a separate iCloud account while still being under our shared apple ID account. This should prevent shared messages and shared contacts as well. Just a couple of ideas. Hope it helps.

I bought new music on itunes for th first ime in years and the updates erased all my music from my ipod and none of the new music that I bought was downloaded...a bunch of stuff I never heard of is now on my ipod. How do I reload my library?

I went to itunes for the 1st time in years and bought music. The updates removed all the songs on my ipod and did not downlaod my purchases. Instead I have a bunch of songs I never heard of. How do I reload my library on my ipod and get rid of the terrible junk that is on there now?

Was this a different computer/iTunes library than what it you had originally sync the iPod with? If so, that would explain why all of your content that WAS on your iPod was erased, since an iPod can only be synced with one iTunes library at a time.
As for your current predicament, you'll need to figure out how your iPod is configured to sync music and then adjust it so that the stuff you don't want on it is removed during the next sync operation and the music you DO want on it will be transferred over to it from iTunes.
B-rock

Pix501: allow all incoming smtp to one host and all smtp out from one host only

I have a pix501 and I have a mail server. What I would like to do is ensure that smtp traffic from the web only goes to my mail server and that my mail server is the only machine on my local network that can send to the internet on port 25. This is to secure the possibility of bots on my childrens PCs spamming other users. The mail server has been relay secured for selected PCs only.
To the pix501; I think the following is what I need, but would like somebody to confirm or correct me:
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
access-list inbound permit tcp any host x.x.x.x eq smtp
access-list outbound permit tcp host x.x.x.x ant eq smtp
access-group inbound in interface outside
access-group outbound in interface inside
Most important:
1. Have I got the access-lists right? Does pix501 support host x.x.x.x (ip of local webserver 192.168.x.x)
2. Are the access lists the right way around?
3. Is the access-group setup right?
4. Is there anything else that needs doing/
Any help appreciated.
Note: I am a Cisco newbie and trying to learn,

Thanks for that information.
I thought about this some more, after seeing your response, and I was wondering; if I only want to restrict smtp outbound traffic, but allow all other traffic, would the following work, as I dont have to allow each specific port/ip address:
access-list outbound permit tcp host 192.168.1.3 any eq smtp
access-list outbound permit tcp host 192.168.1.36 any eq smtp
access-list outbound deny tcp any any eq smtp
access-list outbound permit udp any any
access-list outbound permit tcp any any
I realise that this would open all sorts of other security risks, but at least trojans/worms will not be able to spam from PCs other than those listed as per the first 2 lines ( which is my major concern at the moment). As I learn more about the traffic on my network I can block more undesirable ports.
Sorry to be a pain, but this could be useful to other and the more complete the setup, the easier it will be for them.

Syncing all my devices (Apple TV, iPads and iTunes)

Since my Apple TV get's it's songlist from my iCloud account, I want it to match my iTunes account. I've started using a product called SuperSync to achieve this. I have over 10,000 songs and really tired of messing with duplicates and the poor organization that iTunes does. So I've made my laptop the hub for iTunes. It's a PC running Windows 8.1 and iTunes 11.1.5.5. My library in "Preferences" points to my M: drive which is a NAS device. When I sync with the iCloud account, I get duplicates for all my current songs on my NAS device. So what I did was to move all my music off to an external USB drive and allow the sync from iCloud into a clean directory on my M: NAS drive. My goal is once this is complete, to copy the M: drive to my E: drive (iTunes Media folder) and change the preferences in iTunes to point at my E: drive instead of M:. After that I will use SuperSync to sync my files between my E: drive (local iTunes Library) to my M: drive (remote iTunes Library). This is the only way I can't think of that makes any logical sense. Any other ideas??

I would recommend to turn off the services that don't work properly or just disconnect your account for a moment and then add it back again.
On iOS: "Settings > iCloud" then turn off the services or delete the account for a moment
On the Mac: "System Preferences > iCloud
In most cases this helps to refresh thy sync process.

How to remove devices shown in RME and not existing in DCR?

I have problem with some devices (in fact IP addresses) that was discovered and used by RME in the past but are not reachable anymore. They spoil statistics in RME (collection of inventory and configuration) however they do not exist in DCR. Do you have any ideas how to get rid of them?
RME: 4.2.0
CS: 3.2.0

Check Common Services > Device and Credentials > Reports > Devices not configured in ACS to see if your devices show up there. If they do, then you will need to either add those devices to ACS (temporarily) so you can remove them from DCR; or you will need to temporarily disable ACS integration, remove the devices from DCR, then re-enable integration.

I'm having trouble with seeing all that is shown on pages and on my email page

I have trouble seeing all the photos and on my e-mail home page and e-mail compose page I can't see evrything

See:
* [[Images or animations do not show]]
* [[Websites look wrong]]
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

HT1766 I see my facebook login which i had not used for long. I am using new log in from all other devices including i phone and ipad. Since i purchase ipad air its giving me lot of hard time

I see my old and unavailable email as my login on my new ipad air. I am not using that email id anywhere on my iphone and imac. I have tried many options to remove facebook to reload with my actual id but i am unable.

Yes JimHdk, i have removed this email long back, facebook is not allowing to change email also. Very strange

I have just brought my new mac book air home from the store and cannot get onto the internet even although correct password entered for wifi and signal strong and it says it is connected to network , all other devices are working in the house

Hi
I have just brought my mac book air home from apple store and it won't connect to internet although correct wifi password entered and all other devices are connecting ok and signal strengh strong and it says it is connected !

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare.
Best.

SAP and Non-SAP data to Xcelsius

Hi Experts,
I m new to Xcelsius and i a m currently working on Xcelsius project, i need help on approach to bring both SAP and Non-SAP data to Xcelsius. Here the scenario goes on....
Total 6 plants are there, out of 6, 4 plants are on SAP and other 2 plants are on Non-SAP (Excel)
The requirement is to develop a dashboard to see all the plants details (both SAP and Non-SAP)
The approach i suggested for SAP: ECC --> BW --> InfoProvider --> Query --> QaaWS --> Xcelsius
For non-sap, data is available in excel, so we can bring that data directly to xcelsius, but problem is how to make it dynamaic because data in excel changes daily.
So my doubt is, if i develop a universe on excel files, then how to combine both SAP and Non-SAP universes. Is Data Federator is required for this or is there any approach to bring both SAP and Non-SAP data to Xcelsius.
Can any one help me on this
Thanks & Regards
Ramakrishna Kamurthy

hi
Another approach which i have used in the past is to have data in XML format, placed on a web server. When my data changes daily, i just export my data from excel or whatever source into the XML format..
Use the XML data connector to bring into xcelsius.
thanks.. hope this helps
regards
Jeff.

Have had to re-pair all Bluetooth devices since iOS 7

It seems that I've had to re-pair all bluetooth devices with my iPhone and iPad since upgrading to iOS 7. Was this expected or is there some issue with iOS 7 that is affecting existing bluetooth pairings?
Has Apple posted any knowledge base articles on this yet?
Thanks,

WiseJD's comments are fascinating to me, because I had the opposite situation. My iPads, with which I have never used Bluetooth, both came up with Bluetooth "On" after updating to iOS 7. I was surprsed by this.
As I recall, my iPhone also had Bluetooth on after the upgrade.
By the way, I also have a Lexus and can report no pairing issues since the update.

Validation for Unique Name and Non-AlphaNumeric Characters

Hi All,
How to do Unique name and Non-Alpha Numeric Characters Validation?
Name should be unique and only allow alphanumeric characters.
Where all validations must be done? In EOImpl or any other file?
Plz help
Thanks,
Sk

SK
Here are the steps you need to perform to check duplicate Employee Names need not entered by user.
First create a VVO in your schema.server package(that of EO) with the following query.Generate both VVOImpl and VVORowImpl file.
select full_name
from fwk_tbx_employees
where full_name =:1Now add this VVO to your VAM means give instance to it.
Now open the VVOImpl and write below code to execute query based on new name entered by user
    public void initQuery(String name)
      setWhereClauseParams(null); // Always reset
      setWhereClauseParam(0, name);
      executeQuery();
    }Now open Your Entity Expert class and add below method in it
   public boolean isEmployeeNameExists(String name)
     boolean isExists = false;
           // Note that we want to use a cached, declaratively defined VO instead of creating
           // one from a SQL statement which is far less performant.
     EmployeeNameVVOImpl employeeNameVVO =
       (EmployeeNameVVOImpl)findValidationViewObject("EmployeeNameVVO1");
     employeeNameVVO.initQuery(name);
     // We're just doing a simple existance check. If we don't find a match, return false.
     if (employeeNameVVO.hasNext())
       isExists = true;
     return isExists;
   }Now you need to call this expert class method from setter method of EOImpl for name.so Open your EOImpl file and go to setter method of name
      if ((value != null) || (!("".equals(value.trim()))))
        EmployeeEntityExpert expert = getEmployeeEntityExpert(getOADBTransaction());
        if (!(expert.isEmployeeNameExists(value)))
            throw new OAException("Duplicate Employee Name", OAException.ERROR);
      }Remember to write code above setAttributeInternal.
Hope it helps!!!!
Let me know if you have queries in it.
Thanks
AJ

TS1286 Hello All, I am using a PC and have an iphone - has anyone gotten the error message when sync'g itunes Ox800000A?

Hello All,
I have lost the ability to connect to itunes to update software and apps etc., My PC is giving me an error message of Ox800000A - apple says it may be a USB port problem. Has anyone else received this error problem and if so did you fix it and how?
The USB ports on my PC are working fine? Thanks in advance.

Hi MarcusAH,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iOS: Unknown error containing '0xE' when connecting to a Windows PC
http://support.apple.com/kb/ts3221?viewlocale=fr_fr#0xE800000a
About unknown error 0xE800000a
When connecting your iOS device, iTunes might display an "unknown error 0xE800000a" when the contents of your lockdown directory are unusable. Do the following depending on your operating system:
Windows XP
Disconnect all iOS devices from your computer, and quit iTunes.
Open My Computer from the Start menu.
Choose Tools > Folder Options in the file browser window then click the View tab and change the "Hidden files and folders" option to "Show hidden files and folders."
Click OK.
Navigate to the following folder on your computer, noting that the drive letter can vary depending on which drive letter Windows starts from:
C:\Documents and Settings\All Users\Application Data\Apple
Move the Lockdown folder to the Recycle bin.
Reconnect your iOS device and open iTunes.
Windows Vista or Windows 7
Disconnect all iOS devices from your computer, and quit iTunes.
Open Computer from the Start menu.
Choose Organize > Folder and search options. In the file browser window, then click the View tab and change the "Hidden files and folders" option to "Show hidden files and folders."
Click OK.
Navigate to the following folder on your computer:
C:\ProgramData\Apple
Move the Lockdown folder to the Recycle bin.
Reconnect your iOS device and open iTunes.
Hope this helps,
Mario

My iCloud email does not sync to all my devices

My iCloud email (yes an @me address) does not sync to all my devices. My phone and mac sync perfectly, but my iPad never updates. If I have my mac and phone on the mail program and I archive an email it works instantly on both devices. However my iPad seems to be in the stone age. Even though I've archived all my mail and my inbox is empty on both my mac and phone my iPad still has a notification for 28 new emails going back to last week. Its like my iPad is completely seperate.

Like I said its seemless between my phone and mac. I can archive on my phone and it will immediately disappear from my iMac and vice versa. Its odd that it works on one iOS device and not another... And when I say my emails don't archive on my iPad I mean it shows the last 50 emails (because of my settings) from my inbox like I haven't already archived them already. So I have emails on my iPad from 9 days ago =\

All end devices shown as hosts and none as Storage

Similar Messages

Maybe you are looking for