All Fields of data source doesn't appearing in source field of transf
Hi all Bi experts,
I am working on converting our OLD bw flow (3.x) into new BI7.0 flow.
when I am trying to crate transformation from the context menu of data source I am not getting all fiels which are available at data source level.At data source level I have 13 fields.but I am getting only 11 in transformation.
After analysing our Old flow (3.x) I found that the fields whicha re not appearing are the fields which are not mapped in transfer rules or made to constant
thanks in advance
Edited by: santosh kumar on Nov 26, 2008 8:38 PM
Hi Santosh
If there are fields which are present in datasource on BI side but they do not appear in transformation, then make sure that all the fields are checked as "Transfer" in the datasource maintenance.
By default all the fields are checked as "Transfer" but there are cases were at times the fields are not marked as checked for "Transfer". So u need to manually check them.
Hope this should solve ur problem.
Regards
Gaurav.
Similar Messages
-
BAM 11g - Data object doesn't appear!!
Hi!
I'm doing the QuoteProcessLab, now I'm doning the BAM lab. It says that after running the setup.bat and redeploying the project with the settings that enable BAM, I should see in the BAM Page a BI_DEFAULT_Composite_Process, but I don't see that data object.
I have run again the setup.bat and redeployed the project and the data object doesn't appear!
Am I missing some step?
Thanks in advance!
AnaChris,
All the details of what the filter is doing are hidden. They only appear on the configuration dialog or in the code inside the Express VI. Without the actual code (an image is useless) we cannot tell.
Most likely the filter is configured in such a way that the output is empty so that there is nothing to write to the file.
Try putting some indicators at the input and output of the filter to see what is there.
Lynn -
Purchasing data button doesn't appear on BP
Dear Gurus,
I am facing the following problem.
On the screen in the GUI via tx BP when I display a vendor business partner with supplier role the 'Purchasing data' button does not appear.
I have checked every customizing, tables and SAP notes, (everything looks fine) but could not find the solution. The same happens at other installations of other companies (SRM 5.0 and 7.0 as well).
Any idea?
Thanks in advance, PalHi
First, Check whether you have set up the Purchase Organization in the SRM Org structure properly or not. It has to point to correct backend system.
Secndly, Is the vendor extended to that purchase organization in Backend System. check it there
Once you have both the settings in place, replicate the vendor again , it should show data related to that Purchase ORganization in BBPMAININT. You wont be able to see the Purch org and company code data in BP Transaction. It will appear in BBPMAININT
Regards
Virender Singh -
Dynamic rendered component doesn't appear in source file! How to get hold
I have three select components on my page, the 1st one is selectOneRadio2, the 2nd one is selectManyCheckbox1, and the 3rd one is selectOneRadio3. The selectManayCheckbox1 and selectOneRadio3 do not display at the same time. Their rendered properties are dynamically set in the managed bean depending on the choice of the selectOneRadio2. It toggles between those two components just fine when I set the rendered property in the managed bean dynamically in a value change event, however when I tried to retrive the value from the 3rd component selectOneRadio3 which was not rendered initially (or by default), I get nothing. When I viewed the source file after the component is rendered on the page, that component is not in the source file at all, and I saw the default rendered 2nd component (selectManyCheckbox1) instead!!! How can I get hold of the later rendered component (selectOneRadio3)???
<tr:selectOneRadio value="#{bindings.expenseTypeList1.inputValue}"
label="Expense Type"
binding="#{backing_eef_expense.selectOneRadio2}"
id="selectOneRadio2"
valueChangeListener="#{backing_eef_expense.expenseTypeChange}"
autoSubmit="true">
<f:selectItems value="#{bindings.expenseTypeList1.items}"
binding="#{backing_eef_expense.selectItems2}"
id="selectItems2"/>
</tr:selectOneRadio>
<tr:panelGroupLayout binding="#{backing_eef_expense.panelGroupLayout3}"
id="panelGroupLayout3"
partialTriggers="selectOneRadio2">
<tr:selectManyCheckbox label="Multi Choice"
rendered="#{backing_eef_expense.renderMultiChoice}"
binding="#{backing_eef_expense.selectManyCheckbox1}"
id="selectManyCheckbox1"
valuePassThru="true">
<f:selectItems binding="#{backing_eef_expense.selectItems4}"
id="selectItems4"
value="#{backing_eef_expense.itemList2}"/>
</tr:selectManyCheckbox>
</tr:panelGroupLayout>
<tr:panelGroupLayout binding="#{backing_eef_expense.panelGroupLayout4}"
id="panelGroupLayout4"
partialTriggers="selectOneRadio2">
<tr:selectOneRadio label="Single Choice"
rendered="#{!backing_eef_expense.renderMultiChoice}"
binding="#{backing_eef_expense.selectOneRadio3}"
id="selectOneRadio3" valuePassThru="true">
<f:selectItems binding="#{backing_eef_expense.selectItems3}"
id="selectItems3"
value="#{backing_eef_expense.itemList2}"/>
</tr:selectOneRadio>
</tr:panelGroupLayout>
I use Trinidad components because it's a migrated application from 10g to 11g. I'm using 11g now.
Edited by: SophiaM on Feb 3, 2011 10:23 AMHi Joonas, Thank you for your replay. I don't know the answer to your question.
First, I have no idea if that will cause any problem, or the libraries would have conflict or not if I use both within the same application. We are very careful about that becaue we had a lot trouble when we did the migration. A LOT of things were broken after the migration and some of the issues were caused by conflict on libraries. That's why although I am creating new pages in the application, I still carefully stay with Trinidad components.
Second, out of curiosity from your suggestion, I tried to add ADF library and technology into my project, I still don't see the ADF components avaiable in my Component Palette panel, even after I restarted JDeveloper. So I don't know how to switch it even if I dare.
I just read something like this, seems apply to my situation:
Your correct in the fact that rendered=false is useless. However, that is not how it's typically used. Typically this will be bound to a backing bean which will allow you to turn the component on/off. You should use a hidden input field and a switcher if you need to keep the value in the form submission. Adam is totally correct in that it will break a bunch of stuff if we all of a sudden just "turned it on" because people have come to expect the current behavior.
Do you know what a switcher is? -
1) how can I see what is on my icloud and how would I edit the data that is on it?
2) I am having problems with an app syncing data with pc - how can I fix that? It is mobile noter.Welcome to the Apple Community.
You can see what's in iCloud collectively at settings > iCloud > storage & back up > manage.... You can only edit the data through the appropriate app (contacts, calendars etc)
For problems with 3rd party apps, contact the developer. -
Line-In doesn't appear in the mixer (Audig
The Line-In is dead, and I suppose it's because this source doesn't appear in the mixer.
Because of this, I'm cannot enable the soucre. And then I get no soud.
If I choose "SB Audigy 2 AZS Audio" as default for recording, I'm missing the option to choose Line-In in standard Windows mixer. (The slider isn't there.)If I choose "C-Media Wava Device" as default for recording, I can choose Line-In in standard Windows mixer, but I don't get any signal.
I have installed the last drivers.
Hope you can help me!OK, sound some better.
Can you run the Creative diagnostic tool without errors?
If you do not find next programs mentioned, you have to install them
(Creative CD bundled with cadr).
Have you AudioHQ on System Control Panel.
- Is speakers set to be muted when using headphones. Uncheck this.
- options : is SB Audigy xxxxx selectedt as sound device?
Control Panel:Sounds & Multimedia
- Audio : is Sound Play Back devic selected to be SB Audigy xxxx
- is all behind Volume (button) set not muted
Check if mic and midi settings are like you want.
- is all behind Advanced (button) set like it shoul be
Hardware : Creative audigy xxx - properties : Creative xxxx (WDM)
- is use this audio device selected
- is do not map through this device selected
Creative Surround Mixer
Speaker settings
- set same settings as above (and select syncronization with control panel)
- unselect digital output only
Rec settings (red portion with slider)
- select AnalogMixer as source
- check if record without monitoring is not checked
- disable unneeded inputs (mic, aux, ...) - wave, volume, linein should be ON
- set input and recording levels
EAX -panel
- switch off all effects if you do not need them
This come into mind now ... hope it helps ...
.jtpMessage Edited by jutapa on 04-07-2005 02:47 AM -
How to Fetch Data From an Internal table to a field in Modulepool Screen ??
In my Modulepool Screen i have two fields ,
Based on the data of the First field ,the second field will display the data.
For ex- first field - I choosed the data -" MARUTI",
then in the second field , all d CARs ( 800,zen,waganor.....)related to MARUTI shd be displayed.
without using POV module hw to use dis ? and also using POV ,what are the function modules to be used ..
pls explore in details...
Thnks to all d contributors for their Time.....see if u have a limited values to display in Listbox, den we will go for vrm_set_values.
but here as per the requirement
thr is no limited Values in d second dropdown box.
Let me Clear abt the requirement.
First field - issue no.
2nd field- Item no.
when u select a particular issue no, den in item it shd display the corresponding item nos related to that issueno. And both Fields r Primary keys in d table( customised Table.)
this is wwht exactly my requirement.
as i created The search help for issueNo, its displaying all the issueno Dat are in DB.
But Itemno Field is nt behaving as per That.
Pls Suggest me.. in details -
6 year-old battery makes horrible sounds, the charging light doesn't appear anymore
Hello!
My battery (and my laptop HP Pavillion zt3019ea) are 6 years old and for few weeks now my battery has made horrible sounds (like a loud mosquito) when connected to the charger. When it's not connected to the charger the sounds stop but it looks like the battery hasn't been charged at all.
The charging light doesn't appear anymore, or very rarely.
Is it the end??!
Is it worth buying a new battery for a 6 year-old laptop (i already changed the hard drive few months ago)?
Thanks a lot!!!
Marine.
This question was solved.
View Solution.I will definately recommend buying a new battery for the unit since you still work on your notebook.
It is bettery to buy geniune spares from HP than buying third party spares as you will have a warranty on the battery purchased.
Although I am an HP Employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem. -
After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?
Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
The list doesn't appear in the input field
Hi All
The list doesn't appear in the input field when I make input or press the BACKSPACE key.
Notes:
I made this modifications:
1. In connection properties I set High speed connections (LAN)
2. In local data settings I set the historial to ON
we had SAPGUI 620 in workstations and now we have installed SAPGUI 710
Thanks for your time and help
Message was edited by:
Genner SanchezHello Genner,
see note 399180:
o FIELD NAME LENGTH
The history is only written for field names with a maximum length
of 40 characters. In earlier SAP GUI versions, this length was
restricted to 30 characters. The history file must be deleted to
achieve extended support.
o FIELD LENGTH
If the length of the input field is 60 or more characters,
history is not written either. "Input field length" refers to the
dictionary length of the field, not to the "visible length" on
the screen. (The restriction of the input data to 60 characters
results from the fact that text editors were often built as lists
of text fields with a length of 60 in the past. In those editors,
this history was quite annoying. On customer request, this was
Regards, Martin -
SQ01 Sap Query - additional fields doesn't appear
Hi everybody,
i've created a SAP Query with transaction SQ01 but one of my additional fields doesn't appear when i execute my Query.
My query shows the G/L account number and the field status Group (table SKB1)
I just need to display equally the text field of "field status Group" but it doesn't work.
When i look at the parameters i can see that it makes the link between the table T004G and SKB1 in order to find the textfield but the field stay blank.
For information T004g is a Pooled table.
Is someone could help me?
Thank youHi,
First you need to create a structure in Data Dictionary - SE11. This structure will contain all the fields that you want to display in the query output.
Example - Name the Strucutre as zz_infoset01
fields of the structure( for your requirement )
BUKRS
SAKNR
FSTAG
FSTTX
Go to T-code SQ02
1) Enter the Infoset name - zinfoset01 press create
2) Enter a Short Description - G/L Infoset - 01
3) select radio button - "Data retrieval by program"
and in "data structure" enter zz_infoset01
4) select "Integrated program" radio button
5) In the next screen click on the "Data reading program" push button(on the application toolbar)
6) An Editor will open with the following code
REPORT rsaqdvp_template .
declarations
(insert your declarations in this section)
DATA:
zz_infoset01 TYPE zz_infoset01 ,
it_data TYPE STANDARD TABLE OF zz_infoset01 WITH HEADER LINE.
selection screen statements
(define your selection-screen here)
!! the following comment MUST NOT BE CHANGED !!
*<QUERY_HEAD>
read data into IT_DATA
(select your data here into internal table IT_DATA)
output of the data
(this section can be left unchanged)
LOOP AT it_data.
zq01 = it_data. .
!! the following comment MUST NOT BE CHANGED !!
*<QUERY_BODY>
ENDLOOP.
7) when you insert your code in the sections it will look like this
REPORT rsaqdvp_template .
declarations
(insert your declarations in this section)
Tables:SKB1,
t004g.
DATA:
zz_infoset01 TYPE zz_infoset01 ,
it_data TYPE STANDARD TABLE OF zz_infoset01 WITH HEADER LINE.
selection screen statements
(define your selection-screen here)
!! the following comment MUST NOT BE CHANGED !!
*<QUERY_HEAD>
*These will be the input parameters for the query
parameters: sp_bukrs like skb1-bukrs,
sp_saknr like skb1-saknr.
read data into IT_DATA
(select your data here into internal table IT_DATA)
*get all the G/L for com code and G/L in selection screen
SELECT bukrs saknr fstag
INTO TABLE it_data
FROM skb1
WHERE bukrs = sp_bukrs
AND saknr = sp_saknr.
output of the data
(this section can be left unchanged)
*for every G/L get the status text from t004g for lang 'EN'
LOOP AT it_data.
SELECT SINGLE fsttx
FROM t004g
INTO it_data-fsttx
WHERE spras = 'EN' "Language
AND bukrs = it_data-bukrs
AND fstag = it_data-fstag.
zz_infoset01 = it_data. .
!! the following comment MUST NOT BE CHANGED !!
*<QUERY_BODY>
ENDLOOP.
8) Save and generate the Infoset.By clicking on the generate button.
9) Now assign the Infoset to the query in SQ01 and select the output list fields.
let me know if you need more info. Also award points if helpful.
Regards,
Santosh -
MB5B - Stock on posting date doesn't show Storage Location field
Hi All,
I run report MB5B - Stock on posting date with Stock Types = Storage Loc/Batch Stock, but the report doesn't show
Storage Location field in result.
How can I see it in this report?
Thank you very much for your kind support!
Cao Huy.hi
what i think i sthis report is only for the OPENINGand CLOSING stock for the period or day
now whenu give SL field then system will only concider stock from that SL
the filed of SL will not be viewable in report as it is just opening and closing balance
regards
kunal -
I open a file - playback - the audio is there - doesn't appear in timeline, but I hear it, after 1 edit, the audio disappears. I have to reboot to get it back then it happens again. All suggeswtions welcome. Thank you, Randy
Is your Premiere Elements 12/12.1 running on a Windows 7, 8, or 8.1 64 bit computer or a Mac computer?
What is the brand/model/settings of the camera recording your video?
Windows 7 64 bit PC
Footage taken from DVD through Adobe Premiere Elements
Are you sure about the Frame Width and Frame Height that you gave 720 x 484? Did you mean 720 x 480?
Yes, my err. 720X480
For the Frame Rate, was it really 29.97 frames per second and you rounded it off to 29 frames per second? Or,
is the frame rate really 29 frames per second?
If the properties that you just posted are representative of your source file, what project preset did you or the
project set for the project preset? If you are not sure, please tell us the readings for Editing Mode, Timebase, Frame Size,
and Pixel Aspect Ratio under Edit Menu/Project Settings/General.
Still having problems - haven't been able to edit project.
Thank you for your help.
Randy Klein -
Visual Composer 7.0: system (data source) does not appear
Hi...
There is a problem: system (data source) does not appear in Visual Composer 7.0
1. There is a connector MDM. It is made by PCD. It has been tested. The test is ok.
2. However, as the data source in Visual Composer a connector MDM does not appear.
3. This problem affects all types of connectors, but the Web Service Connector. Connector Web Service is always there.
What the .....?
P.S. The role of the creator of the connector is the same user of Visual Composer
Thanks...Hi...
There is a problem: system (data source) does not appear in Visual Composer 7.0
1. There is a connector MDM. It is made by PCD. It has been tested. The test is ok.
2. However, as the data source in Visual Composer a connector MDM does not appear.
3. This problem affects all types of connectors, but the Web Service Connector. Connector Web Service is always there.
What the .....?
P.S. The role of the creator of the connector is the same user of Visual Composer
Thanks... -
Select field and hide field at data source ganaration for LO extrction
Hi GURU,S
Could any one tell me what is differce between select field and hide field at data source ganation in LO at r3 side.what happend if u select field and hide field.
Regards.
hariHi Hari,
If you choose Select fields, you'll be able to filter this IO in Selection tab of infopackage (set IO's value(s) to be loaded).
In case of hide field you'll not have it in the transfer structure at all.
Best regards,
Eugene
Maybe you are looking for
-
Create new plug-in on Mac - FYI
I just went through this process and thought I would jot down the steps, since they are a little bit more complicated than the notes in the SDK documentaion. To make a new plug-in named Whizbang from the template named Skeletion... 0. Copy the S
-
How far can I upgrade OS from Snow Leopard before Adobe CS2 goes in the toilet?
I have OSX 10.6.8 but I am getting messages from websites that my version of Safari is too old. So I thinking of updating as far as I can without having to buy all new software. And I really don't want to go up in a cloud if I can help it. I realize
-
MacBook won't boot, cursor is frozen at login
I have a MacBook (late 2006) keeps freezing at the login. When I get to the login screen, the cursor will not move; it's remains in the same place every time I log in. Here's what I think what happened. I created another account in my MacBook because
-
How can we give the option to edit the cell value of a table to user
i have a Jtable which shows the entered values of all the expenses daily.Before saving them i want to provide an option to user for editing.How this is possible. I went through the TableCellEditor interface .I think it needs to be implemented some co
-
Reader XI et signature numérique
Bonjour, Je souhaite apposer une signature numérique avec Adobe Reader XIsur un document PDF. J'ouvre donc le panneau "Signer" mais l'option "Signer avec un certificat" est grisée. Tel qu'indiqué par l'aide ( http://helpx.adobe.com/fr/reader/using/si