All files I worked on today ended up corrupted...

I worked on approximately 10 images today, and all of them are corrupt. When I try to open them, I get a message telling me "Could not complete your request because the file is empty."
Must of art I worked on I saved as .psd files, but a file jpegs were also now corrupt.
Any suggestions or reasons why?
I have used Photoshop for nearly 10 years, and have never had this happen before.

I am curious if anyone out there has any other info on these types of crashes that wipe your entire PS session?   I use PS a  lot and I am pretty terrified of this happening again.  Copying your PSD files after they have been saved is a good work around but kind of a pain.  I wished I kept my log from Sat. but I was in a hurry to redo all the lost work.   Some more info is that I started the PS session around 7pm and at 1am I crashed.  3 of the 4 files became corrupt.  The one file that opened was reverted to the 1st saved version with a modified date of around 7:30.   The 3 other files that were corrupt had modified dates of when I 1st saved them around 7:30 as well.  Also though they were corrupt they had files sizes indicative of a 1st save (eg. 180 mb. for the 1st save v/s 800mb average final retouched file size w/ layers etc.) I saved each file 3 or 4 times during the 5 hour span.  The jpgs I made of the files disappeared after the crash.  Another note-able thing was during that session I reorganized some older finished psds in the same folder into a subfolder.  After the crash the subfolder didn't exist but the old files where not corrupt and in the orig folder. I am wondering if these crashes are caused by some sort of backup protection going wrong in CS4.  Is PS trying to log or cache the entire session?  Anyway I have being using PS regularly since the old version 6.0 and this is the weirdest thing it's ever done.

Similar Messages

  • Update all button not working after today's update

    After today's iTunes update, the button to update all available app updates no longer works despite multiple clicks. Now each app can only be updated by accepting one at a time. If there are only one or two apps it is not too bad, but I had 15 today!

    if you have ONE app that is no longer available or has a problem with it (access, country/location, etc.) then the whole batch will fail. *****, because you can't tell which app until you go through all of them one by one. update often

  • Script to search all files in specified folder for multiple string text values listed in a source file and output each match to one single results txt file

    I have been searching high and low for this one.  I have a vbscript that can successfully perform the function if one file is listed.  It does a Wscript.echo on the results and if I run this via command using cscript, I can output to a text file
    that way.  However, I cannot seem to get it to work properly if I want it to search ALL the files in the folder.  At one point, I was able to have it create the output file and appear as if it worked, but it never showed any results when the script
    was executed and folder was scanned.  So I am going back to the drawing board and starting from the beginning.
    I also have a txt file that contains the list of string text entries I would like it to search for.  Just for testing, I placed 4 lines of sample text and one single matching text in various target files and nothing comes back.  The current script
    I use for each file has been executed with a few hundred string text lines I want it to search against to well over one thousand.  It might take awhile, but it works every time. The purpose is to let this run against various log files in a folder and
    let it search.  There is no deleting, moving, changing of either the target folder/files to run against, nor of the file that contains the strings to search for.  It is a search (read) only function, going thru the entire contents of the folder and
    when done, performs the loop function and onto the next file to repeat the process until all files are searched.  When completed, instead of running a cscript to execute the script and outputting the results to text, I am trying to create that as part
    of the overall script.  Saving yet another step for me to do.
    My current script is set to append to the same results file and will echo [name of file I am searching]:  No errors found.  Otherwise, the
    output shows the filename and the string text that matched.  Because the results append to it, I can only run the script against each file separately or create individual output names.  I would rather not do that if I could include it all in one.
     This would also free me from babysitting it and running each file script separately upon the other's completion.  I can continue with my job and come back later and view the completed report all in one.  So
    if I could perform this on an entire folder, then I would want the entries to include the filename, the line number that the match occurred on in that file and the string text that was matched (each occurrence).  I don't want the entire line to be listed
    where the error was, just the match itself.
    Example:  (In the event this doesn't display correctly below, each match, it's corresponding filename and line number all go together on the same line.  It somehow posted the example jumbled when I listed it) 
    File1.txt Line 54 
    Job terminated unexpectedly
     File1.txt Line 58 Process not completed
    File1.txt
    Line 101 User input not provided
    File1.txt
    Line 105  Process not completed
    File2.txt
    No errors found
    File3.txt
    Line 35 No tape media found
    File3.txt
    Line 156 Bad surface media
    File3.txt Line 188
    Process terminated
    Those are just random fake examples for this post.
    This allows me to perform analysis on a set of files for various projects I am doing.  Later on, when the entire search is completed, I can go back to the results file and look and see what files had items I wish to follow up on.  Therefore, the
    line number that each match was found on will allow me to see the big picture of what was going on when the entry was logged.
    I actually import the results file into a spreadsheet, where further information is stored regarding each individual text string I am using.  Very useful.
    If you know how I can successfully achieve this in one script, please share.  I have seen plenty of posts out there where people have requested all different aspects of it, but I have yet to see it all put together in one and work successfully.
    Thanks for helping.

    I'm sorry.  I was so consumed in locating the issue that I completely overlooked posting what exactly I was needing  help with.   I did have one created, but I came across one that seemed more organized than what I originally created.  Later
    on I would learn that I had an error in log location on my original script and therefore thought it wasn't working properly.  Now that I am thinking that I am pretty close to achieving what I want with this one, I am just going to stick with it.
    However, I could still use help on it.  I am not sure what I did not set correctly or perhaps overlooking as a typing error that my very last line of this throws an "Expected Statement" error.  If I end with End, then it still gives same
    results.
    So to give credit where I located this:
    http://vbscriptwmi.uw.hu/ch12lev1sec7.html
    I then adjusted it for what I was doing.
    What this does does is it searches thru log files in a directory you specify when prompted.  It looks for words that are contained in another file; objFile2, and outputs the results of all matching words in each of those log files to another file:  errors.log
    Once all files are scanned to the end, the objects are closed and then a message is echoed letting you know (whether there errors found or not), so you know the script has been completed.
    What I had hoped to achieve was an output to the errors.log (when matches were found) the file name, the line number that match was located on in that file and what was the actual string text (not the whole line) that matched.  That way, I can go directly
    to each instance for particular events if further analysis is needed later on.
    So I could use help on what statement should I be closing this with.  What event, events or error did I overlook that I keep getting prompted for that.  Any help would be appreciated.
    Option Explicit
    'Prompt user for the log file they want to search
    Dim varLogPath
    varLogPath = InputBox("Enter the complete path of the logs folder.")
    'Create filesystem object
    Dim oFSO
    Set oFSO = WScript.CreateObject("Scripting.FileSystemObject")
    'Creates the output file that will contain errors found during search
    Dim oTSOut
    Set oTSOut = oFSO.CreateTextFile("c:\Scripts\errors.log")
    'Loop through each file in the folder
    Dim oFile, varFoundNone
    VarFoundNone = True
    For Each oFile In oFSO.GetFolder(varLogPath).Files
        'Verifies files scanned are log files
        If LCase(Right(oFile.Name,3)) = "log" Then
            'Open the log file
            Dim oTS
            oTS = oFSO.OpenTextFile(oFile.Path)
            'Sets the file log that contains error list to look for
            Dim oFile2
            Set oFile2 = oFSO.OpenTextFile("c:\Scripts\livescan\lserrors.txt", ForReading)
            'Begin reading each line of the textstream
            Dim varLine
            Do Until oTS.AtEndOfStream
                varLine = oTS.ReadLine
                Set objRegEx = CreateObject("VBScript.RegExp")
                objRegEx.Global = True  
                Dim colMatches, strName, strText
                Do Until oErrors.AtEndOfStream
                    strName = oFile2.ReadLine
                    objRegEx.Pattern = ".{0,}" & strName & ".{0,}\n"
                    Set colMatches = objRegEx.Execute(varLine)  
                    If colMatches.Count > 0 Then
                        For Each strMatch in colMatches 
                            strText = strText & strMatch.Value
                            WScript.Echo "Errors found."
                            oTSOut.WriteLine oFile.Name, varLine.Line, varLine
                            VarFoundNone = False
                        Next
                    End If
                Loop
                oTS.Close
                oFile2.Close
                oTSOut.Close
                Exit Do
                If VarFoundNone = True Then
                    WScript.Echo "No errors found."
                Else
                    WScript.Echo "Errors found.  Check logfile for more info."
                End If
        End if

  • WiFi 3G IPad 2 not recognizing WiFi and only recognizing 3G.  Have only had the device 4 days and was working until today.  Now will not recognize WiFi and will only run on 3G.

    Received new IPad 2 4 days a ago.  Set-up WiFi on home network and 3G on At&T service all has been working until today.  I turned 3G off Thursday so that WiFi was the primary source.  Yesterday went to a friends house and IPad recognized WiFi and was able to use.  Today not able to use WiFi at home only 3G.  WiFi is working on my laptop so that is not the issue.  Is there something that I am missing?

    WiFi is on, but system is not recognizing it.  I am not fimiliar with Ask feature, what is this?  I have noticed from other posts that my WiFi indicator in the top left is grayed out.  I have tried restore settings that some people have recommended.  Sounds like alot of people are having problems with the newest launch of the IPad 2.  I had put that I have the iOS 4.3.2 but it is iOS 4.3.3.  Is there any problems with this operating system?

  • How To Make mozilla.cfg, override.ini, all-companyname.js, Files To Work Once And For All For All Users

    I'm currently trying to apply a fix to the firefox browser (version 23.0.1) on over 250 computers. Setting default webpages, disabling annoying prompts like the default browser and importing bookmarks, and erasing the history on shutdown, or startup. This is very easily done modifying the pref.js file, but I will not edit that file, it's out of the question. Another FF update will erase or overwrite all of my modifications.
    I run a computer lab in the university that is locked down using a Net Support School console. You don't need to look that up. Basically all websites are restricted except the ones the ones I whitelist. The websites we use have extensive API's for JS, CSS, Java, PHP, etc... We utilize technology in order for students to use graphing calculators, video's, and taking module test from these white-listed websites, like Pearson, or Aleks. Now with that said, cookies, and stored profile history become a problem, and on some day's up to 25% of the students using the computers need their entire history deleted in order for a page to load. I think I fixed this problem permanently by whitelisting backend sites importing plugins, and API's etc, that I found from the developers console. Whatever. What I've learned from all of this is that Firefox can be very customizable utilizing the "...\Mozilla Firefox\mozilla.cfg" and the "...\Mozilla Firefox\defaults\prefs\all-companyname.js" (or custom.js) The problem, is no matter what I try I can't get these to work. The closest I got was here:
    http://www.intrntpirate.com/?p=615
    Again, even that ^^ didn't work. I followed these directions to a "T". What is wrong with the above information provided in the link? Why is firefox making harder and harder for us to optimize it for massive deployments across a corporation and a university? I'm not going to do any fancy hacks to avoid the main issue. I need mozilla.cfg, and the all-companyname.js, and the override.ini files to work, if and only if they are still relevant.
    These are what my files look like so far:
    name: all-lmc.js<br />
    location: C:\Program Files (x86)\Mozilla Firefox\defaults\pref\<br />
    pref("general.config.filename", "mozilla.cfg");<br />
    pref("browser.startup.homepage", "https://(some url)");<br />
    name: override.ini<br />
    location: C:\Program Files (x86)\Mozilla Firefox\<br />
    [XRE]<br />
    EnableProfileMigrator=false<br />
    <br />
    name: mozilla.cfg<br />
    location: C:\Program Files (x86)\Mozilla Firefox\<br />
    //<br />
    lockPref("privacy.sanitize.sanitizeOnShutdown", true);<br />
    lockPref("privacy.sanitize.promptOnSanitize", false);<br />
    lockPref("browser.shell.checkDefaultBrowser", false);<br />
    lockPref("toolkit.telemetry.enabled", false);<br />
    lockPref("toolkit.telemetry.prompted", 2);<br />
    lockPref("toolkit.telemetry.rejected", true);
    I've tried using, and not using, the automatic mozilla configurator. I've tried changing lockPref to pref. Nothing works. Not the override.ini, not the all-lmc.js, and not the mozilla.cfg. I've wasted hours reading through blogs of experts telling us to modify files that don't exist, or beating around the bush. I'm done researching. If you have the answer or want to help me figure this out just remember to keep it simple. Please. I ultimately want to package all the config files, with a how to, in a zip folder onto our shared drive. To have FF customized and ready to deploy to different departments across campus.

    Thanks very much for your help, but I'm still overlooking something. I double checked to make sure that I did not have a hidden .txt file extention. I then decided to abandon the lock on preferences idea until I get it working. I converted my mozilla.cfg file back to plain text. I made sure I do not have an extra blank line at the end of each file. The syntax looks good, as far as I can tell. I'll copy and paste what I have so far. Did I have the file locations correct posted above? Also, if you feel i can delete some lines of text in my mozilla.cfg file I'll be happy to do so.
    mozilla.cfg
    <pre><nowiki>//
    pref("privacy.sanitize.sanitizeOnShutdown", true);
    pref("privacy.sanitize.promptOnSanitize", false);
    pref("browser.rights.override", true);
    pref(“app.update.auto”, false);
    pref(“extensions.blocklist.enabled”, false);
    pref(“extensions.shownselectionUI”, true);
    pref(“browser.shell.checkDefaultBrowser”, false);
    pref(“toolkit.telemetry.enabled”, false);
    pref(“toolkit.telemetry.prompted”, 2);
    pref(“toolkit.telemetry.rejected”, true);
    pref(“app.update.auto”, false);
    pref(“browser.download.useDownloadDir”, true);
    pref(“browser.search.update”, false);
    pref(“signon.autofillForms”, false);
    pref(“signon.rememberSignons”, false);
    pref(“browser.download.manager.scanWhenDone”, true);
    pref(“browser.formfill.enable”, false);
    pref(“xpinstall.enabled”, true);</nowiki></pre>
    channel-prefs.js
    pref("app.update.channel", "release");
    override.ini
    [XRE]
    EnableProfileMigrator=false
    all-lmc.js
    pref("general.config.filename", "mozilla.cfg");
    defaultPref("browser.startup.homepage", "data:text/plain,browser.startup.homepage=http://bbc.co.uk");
    Again, thank you very much for your time. Do I create my own browserconfig.properties, and firefox.js? Also, I forgot to mention I'm running Windows 8.

  • New year - new desaster: Version Cue CS4 damaged all my december work files

    This year has not a good start for me. Now holidays are over and i have to work further on my projects from december. But now all files in my version cue projects from december are away - only the folder structure is still there, but where are the files. I installed the last version 4.01, i have looked in the project trash can ... nothing! Terrible!!!
    About my system: i installed CS4 Web Standard, end of November on my Vista Home PC. PC works fine and has no harddisk problems. I suppose, that my failure was, that i installed Dreamweaver CS4 new in the end of December - not the other components only a re-install of Dreamweaver. After that i rekognized that my virtual drive from version cue was'nt active, but i got it back with all projects in it, but most files are away now.
    Are the files really away, or is there a chance to get them back? Please Adobe guys, don't say no!
    Shocked Greetings
    Heiner

    It says 'no items matched the search'.
    I looked in the adobe common folder and cant find the versioncue file there either....
    Found a workaround for the copy/paste and deleting problems though. I keep my usb drive plugged in and the window open on my computer, whatever needs copying gets dragged in there and dragged back out. Then I drag the file in the usb into the recycle bin. Kind of a time consuming process(for larger files) but I hope it helps anyone with the problem.

  • When I try to same an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!

    When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
    == This happened ==
    Every time Firefox opened
    == I updated to one of the firefox versions (Not sure which one it was)

    Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.

  • ITunes 10.5 for windows 7 64-bit installed OK but all files now SILENT. Sound works OK on Windows Media Player.

    Installed iTunes 10.5, looks fine but All files now silent. Sound works OK in other programs.

    Installed iTunes 10.5, looks fine but All files now silent. Sound works OK in other programs.

  • I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device.  But I have a Conceptronic router.  Will Time Capsule work with this and how?

    I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device.  But I have a Conceptronic router.
    1. Will Time Capsule work with this and how?
    2. Can my printer USB be plugged in and then shared between the devices?
    3. Can I create a network and how?
    4.  What happend when a visitor logs onto my existing wireless router?
    I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical.  Any help / advice will be much appreciated.
    Ray

    The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router.  I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
    You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

  • I have to extract all files from a hard drive of a macbook pro that is no longer working. All I have to access the hard drive is a PC, is this possible, and if so how?

    I have to extract all files from a hard drive of a macbook pro that is no longer working. All I have to access the hard drive is a PC, is this possible, and if so how?

    You could try Paragon HFS+ for Windows. That would allow you to read and write files from a Mac-formatted drive.
    Clinton

  • I have Adobe Photoshop Elements 10 plus I create PDF files for work some are scan pdf docs. When I install Photoshop Elements 10 it DOES convert all the PDF files to Photoshop Elements-10 Docs. it even changes and shows the PSE-10 Icon. So I am alway inst

    I have Adobe Photoshop Elements 10 plus I create PDF files for work some are scan pdf docs. When I install Photoshop Elements 10 it DOES convert all the PDF files to Photoshop Elements-10 Docs. it even changes and shows the PSE-10 Icon. So I am alway installing PSE-10 or uninstalling it. If I send the  PDF file that has been automatically converted to a PSE-10 the person I send the file to can not open it because they do not have PSE-10. What can I do to stop PSE-10 from converting my PDF files? Don't tell me to upgrade PSE-10 I tried their on-line program and  it is too advance for a hobby photographer like myself and their Help Desk is impossible to reach.

    Hi,
    Can you please share the logs?
    You can use the Adobe  Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
    Thanks,
    Shikha

  • I am trying to convert PDF to word. With my PC  I get a message  "Error occurred while trying to access the service.   It worked fine for a long time.  Has been doing this for days now with all files i try to convert.

    I am trying to convert PDF to Word with Adobe Export PDF on my PC.  I get the message " error occurred while trying to access service".  Has worked fine in past.  Has been doing this for a few days now on all files i try to convert.    Any ideas?? Thanks

    Hi bert090909,
    Are you trying to convert your files from within Adobe Reader? If so, please make sure that you have the most current version by choosing Help > Check for Updates. Earlier versions of Reader could cause the specific error that you're reporting.
    Please let us know how it goes.
    Best,
    Sara

  • I downloaded Lion OSX and at the end I received a notice that Safari can not connect to Server. All internet connections work including Safari on other user on same computer. I downloaded 13items and installed only 12. What do I do now ?

    I dowloaded Lion OSX and installed. I downloaded 13 iitems and installed only 12. At the end of the insta;;ation I received a notice thst Safart can not connect to Server. Safari does not work on user where installation was made. It work on other user. All internet connections work including google. If I go into Safari the blue line goes up to end of "http" on adress and freezes. Where do I go from here.:::???

    Hi There Linc Davis,
    Wow, you are the best.
    Yip this is what the website looks like. Great job Linc Davis.
    Not surprised that the "Shop" tab is missing. Darn.
    Well can you try to access it's "sister" website: astralmusic.com and astralmusicshop.com?
    Since you are awesome with the "Flash" can you investigate if this website has a issue withis this "Flash" too?
    Please Linc Davis

  • A "designer" file being worked on a machine, is checked-in regularly, if at any point of time the latest version of that file is taken on the same machine, all the data gets deleted

    A “designer” file being worked on a machine, is checked-in regularly, if at any point of time the latest version of that file is taken on the same machine, all the data gets deleted

    Hi,
    Could you provide us more information to help you?
    If you have resolved the issue, it would be better if you can post the solution here, which will help others.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • HT1923 This article contains the only thing that worked for me.  I also had to sign out of iCloud and uninstall it.  Then I had to delete all files and folders from all of those applications that were under Program Files, Program Files x86, and Users.

    This article contains the only thing that worked for me.  I also had to sign out of iCloud and uninstall it.  Then I had to delete all files and folders from all of those applications that were under Program Files, Program Files x86, Program Data and Users.  My iPhone 4 will now sync with iTunes both in its USB-connected  mini dock and over Wi-Fi.  It's unfortunate (negligent programming on the part of Apple?) that the upgrade to iTunes 11 did not remove all of those files as part of the upgrade process. 

    I am having the same issue....Same address for years - same as USPS - I tried 5 times (3 macs and 2 iPhones) and now i have 5 CHARGES for 1.00 each on my credit card. I took the credit card info off so they don't charge me anymore. How can they charge me yet still not allow me to download free updates and say I have an invalid address? I'm sure I will spend weeks or months trying to get a credit out of these incompetent idiots.

Maybe you are looking for