All fine until 10.4.11

Everything was smooth and relatively fast until the most recent automatic and install of 10.4.11. Now everything launches sluggishly, with intermittent pauses. I used to be able to print something and surf the net while copying files without any slowdown, but now there is slowdown?
Have fixed permissions? Anyone else out there? And thank you for your time.

Darin:
Try starting up in Safe Mode, log in Empty Trash, then Restart normally and log in.
If that does not help then
Download and install Mac OS X 10.4.11 Combo update (PPC)
Repair Disk Permissions in Applications > Utilities > Disk Utility.
Please post back with an update or further questions/comments.
Cheers
cornelius

Similar Messages

  • I uptaded my ipod recently to ios 5 i have a 3rd/4th gen and wanted to use i message its all fine until i go to send a message it goes about 90% of the way and just doesnt send comes up delivery failed same as facetime wont conect with the otherperson

    i go into my ipod messageing click on who i wont to send a message to i send like hi and it goes 90% of the way waits a bit still says sending then fails the other person say that they sent one to me exact id i dont get it same with facetime i go to use it they accept it says connecting and it doesnt connect please can anyone help its soo frustrating

    Purplehiddledog wrote:
    I do backup with iCloud.  I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud. 
    I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
    I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever.  Is that right?
    In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
    If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

  • All fine until last restart

    Concerning iMac G3 266, Friend of mine brought his old iMac 266 to hopefully update the system, after I checked and did firmware update first, I proceeded to update his iMac 266 to OS 9.2.2. Everything working fine then he inquired if it would run OS X, so went to install 10.2 but found we had not installed firmware update 4.1.7 so we quit OS 10.2 installer and restarted but upon restart computer froze, no response in anyway so had manually to power down unit, waited a while and went to power up computer and now show no power to anything, no orange light, nothing, reset PRAM, plugged unit back to power still nothing, what happened here?

    Hey well the firmware version for the trays is 1.2 as far as I can tell. There was also an update to go to 9.2.2:
    http://docs.info.apple.com/article.html?artnum=60384
    The trays aren't supposed to have the OS 10.2 firmware problem:
    http://tinyurl.com/2q5v4q
    I'd try a PMU reset. It could be a flyback problem. Sometimes when this happens I'll pull the battery and power cord, push the power button and let the iMac just sit there. Sometimes for a week. When I come back often the problem is gone.
    Richard

  • Bought used iphone at xmas. Fine until update for IOS6.1 appeared and i hit install. All I get is flashing logo now. tried hooking to computer and got dfu but flashing logo happening again. Dont know if jailbroken or not can i reset or get it to work agai

    Bought used iphone 4 at xmas all fine until update for ios 6.1 came up and i hit install. Now all i get is flashing logo. know nothing bout tech...im old.lol tried hookin up to computer and it went to dfu mode but then flashing logo happening again. Dont know if phone is jailbroken? has cydia store on it. How can i get reset or get it to work again?? Help!!

    Apple will not touch a jailbroken device.
    You can try restoring as new, but it is not always possible to restore a jailbroken device to a pristine state.
    If possible, return the device to the person or store that it was purchased for refund.

  • Itunes refuses to recognise my ipad telling me that i need to uninstall itunes and reinstall the itunes 64bit version for windows - i am on windows 7 and all was working fine until suddenly for no reason at all itunes had some apple support error

    I have windows 7 and all has been fine until 2 days ago when suddenly i turned on my laptop and i got some error message about some apple support program error - i didnt tkae notice of it only that i couldnt run itunes, so i uninstalled and reinstalled itunes and it now runs as normal, but now it wont recognise my ipad saying that 64bit version is not installed - WHAT RUBBISH IS THIS? i downloaded and installed the 64bit version from applie and yet the error persists - can some one please tell me how i can get itunes to recognise my ipad again - this seems like such a ridiculous error for these two apple products to be conflicting with each other - please help

    well i have found that i needed to not just uninstall itunes, but also apple mobile device support, bonjour apple software update and apple application support - uninstall all these and then install itunes - that seesm to have fixed it, though now i am sync fail - that's a different matter perhaps

  • Plug-In not working on any browser, Latest Flash is installed properly,all was fine until i updated

    Hi guys, all was working fine until yesterday when i updated flash to the newest version, im sad because i can't open any video on youtube, i tried with safari, firefox and chrome, no one seems to work fine. Please if you can help me i will be very happy.
    I tried uninstalling and reinstaling but the result always is the same.. i can't enjoy internet as in the past because i can't open ANYTHING, this is not funny
    Please help!!
    imac 3.06 Ghz Intel Core 2 Duo
    4GB Ram
    OSX Mountain Lion 10.8.4
    Ivan.

    Download the offline installer here: http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg
    If it won't download directly, right click and "Save as"
    Go to: Mac HD/Library/Internet Plugins
    Trash the Flash Player.plugin file from there
    Go to: Mac HD/Library/Application Support/Adobe
    Trash the Flash Player folder (the whole folder)
    Empty the trash
    Reboot
    Mount the DMG and run the installer.
    BEFORE opening any Flash content in Safari, open Safari>Preferences, and check the Security tab to make sure "Allow all other plugins" is checked.

  • I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

    I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
    Thank you,
    Chris

    Michael,
    Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
    As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
    Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
    Best regards,
    David

  • I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

    I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

    I have been experiencing the same problem. My mail app won't even open on my Late 2011 Macbook Pro. It will show as open, but the app will never actually show up.

  • The flash on my iPod touch 5 worked fine until I upgraded to iOS 7. I have made all the updates to 7.0.2, but none have addressed fixing the flash. When is Apple going to issue an update that will include fixing this problem?

    I've seen several discussions on the camera flash for iPhone and iPod Touch 5 wherein the flash doesn't work or is out of sync. Mine was fine until I upgraded to iOS 7. Despite being current with the new updates, there has been nothing to fix the flash.

    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    - Reset all settings                  
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: Back up and restore your iOS device with iCloud or iTunes
      - Restore to factory settings/new iOS device.

  • HT4623 I bought an iPhone 3GS from eBay all was fine until I had to restore software and now it won't activate I've been ushering a 3 SIM card but now it's just saying your phone could not be activated help plz

    I bought an iPhone 3GS from eBay all was fine until I had an hardware fault I sorted that out on mp pc and now it won't activate I've been using a 3 SIM card since I have had it and it just won't activate.as far as I'm aware I bought the phone as new so no jailbreak can any1 help

    Your ebay purchased phone was hacked/jailbroken. You cannot get help here for jailbroken phones. Sorry.

  • I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scann

    Hi!
    After Windows update in april 2014 I cant any longer use the scanning funktion via network from Canon MF8330 Cdn multifunktion printer/fax/scanner machine! It worked fine Before the april Windows update installation.
    I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scanner installation ends, then system report that it cannot install the scanner and I have to try installing again. I have done that now several times but it helps not. I Think it has something to do with that the Canon scanner drivers isn´t 64 bit files, or the problem is that windows update has replaces saome dll file to a never version that not work with Canon drivers. 
    I have seen that there is a service pack 1 from Canon för Windows 8 and 8,1, can I use that service pack to get a never dll file for scanner or work this only for windows 8 version.
    Have someone a solution to this! I have contacted the Canon support already and they say that its a Microsoft problem!
    Very thanful for help in this case!
    Greetings
    Sixten
    Hi!
    I am installing the drivers from Canons site. It is the newest version 2005b for Windows 7 64 bit to MF8330Cdn Canon multifunction printer/fax/scanner. Installation goes well for the printer and fax but not for scanner drivers. The error message is Could not install the scanner. In device manager is there then a unknown device under Image devices. In Device Manager I try to update drivers, but it does not help either, error message is access denied. I am logged on the system with administrator account, therfore it is strange that I get the error message access denied.
    I tried earlier to do system restore back to previous time, but it did not work, error was that the system could not do the system restore because of access rights.
    is there anything else I could do.
    Here is the MF36SCN.inf file for scanner installation from Canon, if it can help You to go further with the problem. Is there something strange in the inf file that does not work in Windows 7 64 bit Windows, something shows that ther is also same 32 bits parts in the inf file.
    Greetings
    Sixten
    ; MF36SCN.INF  -- Windows Setup File for the MF8300 Series (Windows XP,Vista(64-bit))
    ; Copyright CANON INC. 2009 All Rights Reserved
    ; InfID: {BA7E017E-FA42-4831-A084-AA9E671325EE}
    ; Last Modified: 11-Jun-2009
    [Version]
    Signature="$Windows NT$"
    class="Image"
    ClassGUID={6bdd1fc6-810f-11d0-bec7-08002be2092f}
    ;  The above GUID is the class GUID for all scanners and MUST NOT change
    Provider=%Msft%
    CatalogFile.NTamd64=MF36SCN.CAT
    DriverVer=06/17/2009, 11.3.0.0
    [DestinationDirs]
    DefaultDestDir=11
    CNCDsFiles=10,"twain_32\"%CNCRFN%
    CNCMediaFiles=10,media
    ColorFiles.NT=11,spool\drivers\Color
    [ControlFlags]
    ;ExcludeFromSelect=*
    [Manufacturer]
    %Mfg%=Models,NTamd64.5.1,NTamd64.6.0
    [Models.NTamd64.5.1]
    %LPTENUM\CNC.DeviceDesc%=CNCInstall_XP,USB\VID_04A9&PID_2708&MI_00
    %LPTENUM\CNC.DeviceDesc%=CNCInstallNet_XP,CANON_MFNP&%CNCRFN%
    [Models.NTamd64.6.0]
    %LPTENUM\CNC.DeviceDesc%=CNCInstall_VISTA,USB\VID_04A9&PID_2708&MI_00
    %LPTENUM\CNC.DeviceDesc%=CNCInstallNet_VISTA,CANON_MFNP&%CNCRFN%
    ;........................................ WinXP(64-bit) section
    [CNCInstall_XP.NTamd64]
    Include=sti.inf
    Needs=STI.USBSection
    SubClass=StillImage
    DeviceType=1
    DeviceSubType=0x1
    DeviceData=CNCDeviceData
    AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP
    CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
    ICMProfiles="sRGB Color Space Profile.icm"
    ; used for push button event
    Capabilities=0x11
    Events=PushButton.Events
    DriverVer=06/17/2009, 11.3.0.0
    FriendlyName=%CNC.FriendlyName%
    [CNCInstall_XP.NTamd64.Services]
    Include=sti.inf
    Needs=STI.USBSection.Services
    [CNCInstall_XP.NTamd64.CoInstallers]
    CopyFiles = ScanCoInstaller_CopyFiles_x64
    AddReg    = ScanCoInstaller_AddReg_x64
    [ScanCoInstaller_CopyFiles_x64]
    CNCLSO36b.dll
    [ScanCoInstaller_AddReg_x64]
    HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
    ;........................................ WinVista(64-bit) section
    [CNCInstall_VISTA.NTamd64]
    Include=sti.inf
    Needs=STI.USBSection
    SubClass=StillImage
    DeviceType=1
    DeviceSubType=0x1
    DeviceData=CNCDeviceData_VISTA
    AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
    CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
    ICMProfiles="sRGB Color Space Profile.icm"
    ; used for push button event
    Capabilities=0x11
    Events=PushButton.Events
    DriverVer=06/17/2009, 11.3.0.0
    FriendlyName=%CNC.FriendlyName%
    [CNCInstall_VISTA.NTamd64.Services]
    Include=sti.inf
    Needs=STI.USBSection.Services
    [CNCInstall_VISTA.NTamd64.CoInstallers]
    CopyFiles = ScanCoInstaller_CopyFiles_x64
    AddReg    = ScanCoInstaller_AddReg_x64
    [ScanCoInstaller_CopyFiles_x64]
    CNCLSO36b.dll
    [ScanCoInstaller_AddReg_x64]
    HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
    ;........................................ WinXP(64-bit) section(Network)
    [CNCInstallNet_XP.NTamd64]
    Include=sti.inf
    Needs=STI.SerialSection
    SubClass=StillImage
    DeviceType=1
    DeviceSubType=0x1
    DeviceData=CNCDeviceData
    AddReg=CNCAddreg,CNCUSDAddreg_XP
    CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
    ICMProfiles="sRGB Color Space Profile.icm"
    ; used for push button event
    Capabilities=0x11
    Events=PushButton.Events
    DriverVer=06/17/2009, 11.3.0.0
    FriendlyName=%CNC.FriendlyName%
    [CNCInstallNet_XP.NTamd64.Services]
    Include=sti.inf
    Needs=STI.SerialSection.Services
    [CNCInstallNet_XP.NTamd64.CoInstallers]
    CopyFiles = ScanCoInstaller_CopyFiles_x64
    AddReg    = ScanCoInstaller_AddReg_x64
    [ScanCoInstaller_CopyFiles_x64]
    CNCLSO36b.dll
    [ScanCoInstaller_AddReg_x64]
    HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
    ;........................................ WinVista(64-bit) section(Network)
    [CNCInstallNet_VISTA.NTamd64]
    Include=sti.inf
    Needs=STI.SerialSection
    SubClass=StillImage
    DeviceType=1
    DeviceSubType=0x1
    DeviceData=CNCDeviceData_VISTA
    AddReg=CNCAddreg,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
    CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
    ICMProfiles="sRGB Color Space Profile.icm"
    ; used for push button event
    Capabilities=0x11
    Events=PushButton.Events
    DriverVer=06/17/2009, 11.3.0.0
    FriendlyName=%CNC.FriendlyName%
    [CNCInstallNet_VISTA.NTamd64.Services]
    Include=sti.inf
    Needs=STI.SerialSection.Services
    [CNCInstallNet_VISTA.NTamd64.CoInstallers]
    CopyFiles = ScanCoInstaller_CopyFiles_x64
    AddReg    = ScanCoInstaller_AddReg_x64
    [ScanCoInstaller_CopyFiles_x64]
    CNCLSO36b.dll
    [ScanCoInstaller_AddReg_x64]
    HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
    ;.......................................... Common Section
    [PushButton.Events]
    PushButtonPushed1=%PushButtonPushed1%,{66F2A894-EC9B-430c-9D52-E8719D200DAC},%ButtonApp%
    PushButtonPushed2=%PushButtonPushed2%,{506AC8D1-E030-4f05-8F8A-4476153E2D6C},%ButtonApp%
    PushButtonPushed3=%PushButtonPushed3%,{9813E8A6-3652-4768-9AD1-C89E9B5CA956},%ButtonApp%
    PushButtonPushed4=%PushButtonPushed4%,{03B58D10-0245-4859-A489-D695C7729FB3},%ButtonApp%
    [ColorFiles.NT]
    CNZ005.ICC
    CNFR08.ICC
    [CNCDeviceData]
    TwainDS=%CNC.TwainDS%
    SpecialInfo=%CNC.SPInfo%
    DeviceKey=%CNCRFN%
    InstallDirectory="\TWAIN_32\%CNCRFN%\"
    KeyNamePath=%KEYNAME%
    DefaultKeyNamePath=%DEFAULTKEYNAME%
    [CNCDeviceData_VISTA]
    TwainDS=%CNC.TwainDS%
    SpecialInfo=%CNC.SPInfo%
    DeviceKey=%CNCRFN%
    InstallDirectory="\TWAIN_32\%CNCRFN%\"
    KeyNamePath=%KEYNAME%
    DefaultKeyNamePath=%DEFAULTKEYNAME%
    UI Class ID={DF89C549-D67D-4fb0-A575-547073BFAB11}
    ;The above GUID reused from sample MUST change for each Model.
    [CNCAddreg]
    HKLM,"%SGDKEY%","DeviceName",,%CNC.MDL%
    HKLM,"%SGDKEY%","SeriesName",,%CNC.SRS%
    HKLM,"%SGDKEY%","Manufacturer",,"Canon Inc."
    HKLM,"%SGDKEY%","ProductFamily",,"TWAIN Scanners"
    HKLM,"%SGDKEY%","ProductName",,%CNC.MDL%
    HKLM,"%SGDKEY%","InstallDirectory",,"%10%\TWAIN_32\%CNCRFN%\"
    HKLM,"%SGDKEY%","DeviceDriver",,"SCANINTF.DLL"
    HKLM,"%SGDKEY%","ProductId",,"MF8300          "
    HKLM,"%SGDKEY%","DataSourcePath",,"%10%\TWAIN_32\%CNCRFN%\cisds.ds"
    HKLM,"%SGDKEY%","TextEnhance",0x00010001,0
    HKLM,"%SGDKEY%","HiDefinitionMode",0x00010001,0
    HKLM,"%SGDKEY%","AutoPreview",0x00010001,0
    HKLM,"%SGDKEY%","AutoClose",0x00010001,0
    HKLM,"%SGDKEY%","SavePreview",0x00010001,1
    HKLM,"%SGDKEY%","DriverDate",,"06 2009"
    HKLM,"%SGDKEY%","DriverVersion",,"11.3.0.0.mf09"
    HKLM,"%SGDKEY%","ColorGear",,%CNC.ColorGear%
    HKLM,"%SGDKEY%","ColorMatch Platen",,"CNFR08.ICC"
    HKLM,"%SGDKEY%","SGIPPDEF",,"CNCFR08.DAT"
    HKLM,"%SGDKEY%","Descreen",0x00010001,0
    HKLM,"%SGDKEY%","Unsharp",0x00010001,3
    HKLM,"%SGDKEY%","MultiLimitThreshold",0x00010001,180
    HKLM,"%SGDKEY%","MultiJackUp",0x00010001,9
    HKLM,"%SGDKEY%","MultiTrimJackUp",0x00010001,20
    HKLM,"%SGDKEY%","CardPhotoDistThr",0x00010001,30
    HKLM,"%SGDKEY%","PhotoTrimThr",0x00010001,210
    HKLM,"%SGDKEY%","PhotoRThr",0x00010001,210
    HKLM,"%SGDKEY%","PhotoGThr",0x00010001,210
    HKLM,"%SGDKEY%","PhotoBThr",0x00010001,210
    HKLM,"%SGDKEY%","CardTrimThr",0x00010001,30
    HKLM,"%SGDKEY%","CardRThr",0x00010001,30
    HKLM,"%SGDKEY%","CardGThr",0x00010001,30
    HKLM,"%SGDKEY%","CardBThr",0x00010001,30
    HKLM,"%SGDKEY%","ParWhiteBlackEth",0x00010001,5
    HKLM,"%SGDKEY%","ParWhiteBlackEthDG",0x00010001,5
    HKLM,"%SGDKEY%","ParWhiteBlackSth",0x00010001,35
    HKLM,"%SGDKEY%","ParWhiteBlackVth",0x00010001,10
    HKLM,"%SGDKEY%","ParLabelingHth",0x00010001,30
    HKLM,"%SGDKEY%","ParLabelingLeft",0x00010001,1
    HKLM,"%SGDKEY%","ParLabelingTop",0x00010001,1
    HKLM,"%SGDKEY%","ParLabelingRight",0x00010001,1
    HKLM,"%SGDKEY%","ParLabelingBottom",0x00010001,1
    HKLM,"%SGDKEY%","DT_Left",,"10"
    HKLM,"%SGDKEY%","DT_Top",,"0"
    HKLM,"%SGDKEY%","DT_Width" ,,"1.5"
    HKLM,"%SGDKEY%","DT_Length",,"4.5"
    HKLM,"%SGDKEY%","DT_Border_1",,"2.5"
    HKLM,"%SGDKEY%","DT_Border_2",,"3.5"
    HKLM,"%SGDKEY%","DT_BkTh",,"18"
    HKLM,"%SGDKEY%","DT_MinWhThr",,"15"
    HKLM,"%SGDKEY%","DT_MaxWhThr",,"45"
    HKLM,"%SGDKEY%","ButtonNum",0x00010001,1
    HKLM,"%STIKEY%","MF8300",0x00010001,1
    [CNCAddreg.USB]
    HKLM,"%SGDKEY%","AvailableDriver",0x00010001,1
    [CNCUSDAddreg_XP]
    HKLM,"%WIASGDKEY%","ColorMatch",0x00010001,1
    HKLM,"%WIASGDKEY%","ColorGear",,"%CNC.ColorGear%"
    HKLM,"%WIASGDKEY%","TextEnhance",0x00010001,0
    HKLM,"%WIASGDKEY%","Descreen",0x00010001,0
    HKLM,"%WIASGDKEY%","UnsharpMask",0x00010001,0
    HKLM,"%WIASGDKEY%","HiDefinitionMode",0x00010001,0
    HKLM,"%WIASGDKEY%","ProductId",,"MF8300          "
    HKLM,"%WIASGDKEY%","ButtonNum",0x00010001,1
    HKLM,"%WIASGDKEY%","DspGamma",0x00010001,1
    HKLM,"%WIASTIKEY%","MF8300",0x00010001,1
    HKR,,USDClass,,"{4BA01336-9934-455e-8FB8-4A47A638DF0E}"
    HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E},,,"Canon USD"
    HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,,,%11%\CNCC8300.DLL
    HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,ThreadingModel,,"Both"
    ;  The above GUID is specific to MF8300 and MUST change for a different model.
    [CNCUSDAddreg_VISTA]
    HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11},,,"WIA Driver UI Extension"
    HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11}\shellex\ImageProcessingFilter\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}
    ;  The above GUID is specific to MF8300 and MUST change for a different model.
    HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC},,,"Canon Image Processing Filter"
    HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,,,%11%\CNCE8300.dll
    HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,ThreadingModel,,"Both"
    ;  The above GUID is specific to MF8300 and MUST change for a different model.
    [WiaFiles]
    CNCC8300.DLL
    CNCI8300.DLL
    CNCL8300.DLL
    [Wia2Files]
    CNCC8300.DLL
    CNCI8300.DLL
    CNCL8300.DLL
    CNCE8300.DLL
    [CNCDsFiles]
    CISDS.DS
    SGUI.DLL
    SGUI_RES.DLL
    WIARES.DLL
    IOP.DLL
    ITLIB32.DLL
    SCANINTF.DLL
    TPM.DLL
    CNCFR08.DAT
    MC2.TXT
    JDA_CIMG.DLL
    NBS4MB.DLL
    NBSCOR4M.DLL
    RMSLANTC.DLL
    RSTCOL.DLL
    [MPScanLLD]
    CNCMFP36.INI,,,0x20
    CNCLSI36b.DLL,,,0x20
    CNCLSD36b.DLL,,,0x20
    CNCLSC36b.DLL,,,0x20
    CNCLST36b.DLL,,,0x20
    CNCLSU36b.DLL,,,0x20
    [CNCMediaFiles]
    CSSAMP1.MID
    ;-------------------------------Source Index
    [SourceDisksFiles]
    CNZ005.ICC=1
    ITLIB32.DLL=1
    JDA_CIMG.DLL=1
    NBS4MB.DLL=1
    NBSCOR4M.DLL=1
    RMSLANTC.DLL=1
    RSTCOL.DLL=1
    CISDS.DS=1
    SGUI.DLL=1
    IOP.DLL=1
    SCANINTF.DLL=1
    TPM.DLL=1
    SGUI_RES.DLL=1
    WIARES.DLL=1
    CSSAMP1.MID=1
    CNCFR08.DAT=1
    CNFR08.ICC=1
    MC2.TXT=1
    CNCC8300.DLL=1
    CNCI8300.DLL=1
    CNCL8300.DLL=1
    CNCE8300.DLL=1
    CNCMFP36.INI=1
    CNCLSI36b.DLL=1
    CNCLSD36b.DLL=1
    CNCLSC36b.DLL=1
    CNCLST36b.DLL=1
    CNCLSU36b.DLL=1
    CNCLSO36b.DLL =1
    [SourceDisksNames]
    1=%D1%,scan.cab,
    ;-------------------------------String Aliases
    [Strings]
    Msft="Canon"
    Mfg="Canon"
    SGDKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\11.3\Devices\MF8300"
    STIKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\STI"
    DEFAULTKEYNAME="Software\Wow6432Node\Canon\SateraMFP1\Toolbox Ver4.9\Devices\"
    KEYNAME="\Software\Canon\MFToolbox\"
    WIASGDKEY="Software\Canon\SateraMFP1\WIA\3.0\Devices\MF8300"
    WIASTIKEY="Software\Canon\SateraMFP1\WIA\STI"
    D1="Canon MF8300 Series Setup Disk"
    LPTENUM\CNC.DeviceDesc="Canon MF8300 Series"
    ButtonApp        = "MF Toolbox Ver4.9"
    CNCRFN           = "MF8300"
    CNC.MDL          = "Canon MF8300"
    CNC.SRS          = "Canon MF8300 Series"
    CNC.DeviceDesc   = "Canon MF8300"
    CNC.SPInfo       = "Canon MF8300 Scanner"
    CNC.TwainDS      = "Canon MF8300 Series"
    CNC.ColorGear    = "FR08"
    PushButtonPushed1= "Scan-1"
    PushButtonPushed2= "Scan-2"
    PushButtonPushed3= "Scan-3"
    PushButtonPushed4= "Scan-4"
    CNC.FriendlyName     = "WIA Canon MF8300 Series"
    greeting
    Sixten

    How I fixed it, at least for now:
    1. I've been using OC Genie for a few days, it has been working great on Windows but I guess it was causing many games to crash to the desktop so I decided to turn it off, since then the memory issue started to happen, since this morning.
    2. I can only think of my computer got OC Genie addicted, like addiction to crack or cocaine, and the memory, or call it nervous system, wanted more OC Genie, so it gave it to him and bingo, my 4GB readable, but then I used of trickery and deceit to disable OC Genie again and my 4GB is back again without OC Genie.
    Hope this helps someone.

  • I am trying to export a video from Premiere Pro.  I have both audio and video checked and the sequence is active but only the audio exports.  There is no video at all.  Can anyone tell me how to get the video to export.  It was working fine until today.

    Premiere Pro CC has been working fine until today.  I have completed my sequence and it is active.  I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate.  I am choosing entire sequence.  The audio exports but the video and title does not.  Can anyone tell me how to troubleshoot this so I can complete this project?  Please!

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?

    Messages has replaced all my text with a load of letter A's in boxes. What is that all about. When I type a new one it is fine until I hit enter then the same thing applies. Has anyone a fix for this?
    Picture below, many thanks for your help.
    Jason

    Back up all data before proceeding.
    Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.
    Start up in safe mode to rebuild the font caches. Restart as usual and test.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, ask for instructions.
    If you still have problems, then from the Font Book menu bar, select
              File ▹ Restore Standard Fonts...
    You'll be prompted to confirm, and then to enter your administrator login password.
    Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.

  • HT1146 I can not get my mail to send on my mac. It has been fine until about 2 hours ago, incoming mails are fine. I have jused all of my 3 accounts and I can't send from any og them (they are all on different servers) anyone have nay ideas on how I can f

    I can not get my mail to send on my mac. It has been fine until about 2 hours ago, incoming mails are fine. I have jused all of my 3 accounts and I can't send from any og them (they are all on different servers) anyone have nay ideas on how I can fix this?

    Jailbreaking violates the Apple warranty and licensing agreement and voids ALL support from Apple.  No one on here can help you as doing so is a violation of the Terms of Use of these Communities.  If you send the iPad to Apple they will just send it back to you as they are not permitted to work on a machine that has been jailbroken.

  • HT201407 Hello All, I bought an iPhone of eBay. It seemed fine until this morning when it switched itself off and now it won't come on unless it's plugged in. And even then it is asking that it needs to be activated, but it can't connect to iTunes. Any su

    Hello All, I bought an Iphone of eBay. It seemed fine until this morning when it switched itself off and now it won't come on unless it's plugged in. And even then it is asking that it needs to be activated, but it can't connect to iTunes

    Try Recovery Mode... http://support.apple.com/kb/HT1808

Maybe you are looking for