All FIX C6 mobile
Hi,
After Reading all those hanging Problems in C6.. i have setback myself in buying it now...
if all those C6 Problems r fixed..
Will i get All FIX C6 mobile if i go to NOKIA PRIORITY DEALER and Buy a new one..!!
Or i have to buy and move to NOKIA CARE and get SOFTWARE UPDATED IT WIT THOSE FIXES..!!
@ Stay Away from Nokia at least for now & try other mobile phone manufacturers using Android O/S. Android o/s rocks. All Nokia's smart phones are being released with bugs.
Read the complete story -
/t5/Cseries/Nokia-C6-00-is-hanging-a-lot/td-p/767690/highlight/false
/t5/Nseries-and-S60-Smartphones/N97-mini-crash-when-I-hang-up-after-call/m-p/631995
/t5/Nseries-and-S60-Smartphones/N97-Mini-Music-player-hangs-very-often/td-p/643350
Are they cheating consumers???
Similar Messages
-
I can not get apple mobile device to activate. When reinstalling itunes it still comes up with, Service 'Apple Mobile Device' failed to start. Verify that you have sufficient services. I have followed all fixes and can not resolve this problem?
Thanks to the suggestion of Doehunter the problem has been resolved
-
How do I fix "apple mobile device" failure when reinstalling itunes on my PC?
How do I fix "apple mobile device" failure when reinstalling itunes on my PC?
Hey chadnh11,
It sounds to me like you uninstalled then attempted to reinstall iTunes to troubleshoot the issue you were encountering? First, I would try the steps in here:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
If you end up getting to the point where you remove and reinstall iTunes, make sure you follow all of the steps in this link:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
This section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Sincerely,
Delgadoh -
Ever since I had my screen replaced, my laptop has slowly gone to ****. Half of my songs have been lost, webpages die out, shockwave crashes, and no I can't even sign into my laptop. Who can I contact to get this all fixed?
How about the people who fixed the screen?
-
How to clear all fixed assets in SAP Business One
Client wants to clear all fixed assets and create new ones. What is the best way to do it.
Thanks.Hi,
My assumption is that your customer is using 9.0, is it?
I assume that the reason is because there was a mistake during the implementation, meaning that assets created using the application or using import fixed assets master data from excel are not what the user wanted.
The existing rule is that only assets in status 'new' can be removed, and this is a consistency requirement, both technical and from accountancy point of view.
So if the asset is not in status 'new' , it cannot be removed.
What you can do is cancel all transactions generated for the asset, acquisitions, retirements, etc, starting from the last, transaction, until you cancel the first.
Then you execute again depreciation run, to ensure any automatic posted depreciation is reverted.
This way the asset will remain in the system, but with no value. And you can eneter the new assets that will substitute them.
Jose -
Installed Adobe Reader X Cannot print. All Fixes futile!
Have OS Windows XP Installed Adobe Reader X and cannot print. Documents open properly and can be manipulated according to their limitations except I cannot print. Printer is HP Officejet 4500 Wireless. Have converted back to hard connection for this process. Connection not an issue. Everything else except the pdfs will print normally. Printing a pdf elicits no response from the printer. Does not show in queue. Hard attached another older HP printer. It does respond by pulling blank paper thru machine. Have full warranty on HP printer and have been thru detailed process with them. Does not appear to be a printer issue. Any suggestions greatly appreciated!
Tried all the same fixes. Still does not work. Connected to old printer.
Printer responded, but did not print.
In a message dated 9/22/2011 2:01:48 P.M. Eastern Daylight Time,
[email protected] writes:
Re: Installed Adobe Reader X Cannot print. All Fixes futile!
created by kidolph (http://forums.adobe.com/people/kidolph) in Adobe
Reader - View the full discussion
(http://forums.adobe.com/message/3932194#3932194) -
My Adobe flash keeps crashing. Have tried all fixes.
My Adobe flash add on keeps crashing; I have done everything short of uninstalling Firefox. Please help.
Is this an "in plug-in" crash where you see a crash error inside a gray box in the page?
I know you said you have tried all fixes, but if you wouldn't mind ticking off the following just in case:
(1) If you have any recorders/downloaders that interact with Flash media make sure they are as up-to-date as possible, or disable them temporarily.
(2) Disable hardware acceleration in the Flash plugin. See this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
(3) Disable the Flash plugin's protected mode feature. This involves creating or editing a settings file. The following pages/posts provide different ways to do that:
* Adobe support article under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
* Manual steps: https://support.mozilla.org/questions/968190?page=5#answer-509209
* Batch file to automate the manual steps: https://support.mozilla.org/questions/982093#answer-518078
Flash needs to completely unload from memory (restarting Firefox might help) before this would take effect.
Any improvement? -
Hi folks as in the title:
My Ipad 4 froze up and rebooted automatically numerous times.
It then immediately froze up completely and didn't try and reboot itself.
I then hard restarted the device using the home and power buttons simultaneously.
I got the Apple logo and saw my desktop for a moment and then it froze up.
Hard rebooted again only this time I saw "connect to iTunes".
I connected the device to my MBP and iTunes where I was told it was in restore mode.
I followed the on-screen instructions in iTunes to restore the device.
I spent 15minutes downloading the necessary files etc only for the restore to fail through error code '1600'.
I explored this error code in Apple support and followed all Apple's suggestions, and subsequently tried the restore each time.
I have now exhausted all fix options for '1600'...and I can't even get 'connect to iTunes message' on my iPad device now.
Any suggestions would be welcome please?
Kind regards.Thanks for the response Demo.
Unfortunately I don't have another computer with which to try a restore from.
I've tried to reboot the iPad again using the sleep and home buttons (whilst it is unplugged from my MBP) and it remains completely lifeless. I know there is 80% battery life in the device as I had it charging when it malfunctioned.
I've tried recovery mode through iTunes in excess of 15 times now all yielding the same and inevitable result of 'error 1600'.
I think it's time to get to know the team at my local Apple store... -
All of my mobile contacts have been deleted, how do i get them back?
all of my mobile contacts have been deleted, how do i get them back?
If you have a backup that contained the deleted data then restore from that otherwise they are gone
-
Multiple Errors, tried all fixes, nothing seems to work.
My phone was working perfectly and has been for the 2 months since I got it...
All the sudden I went to use it and there was a white screen with some kind of error that wouldn't do anything so I did the battery pop reset.
Now when it starts up it says Uncaught exception: java.lang.NullPointerException(looked it up, tried all fixes, none worked) and I also get the Application Registry.waitF or(**************) timeout and I had Module 'net_rim_pdap_resources' not found error.
None of my music will play and when I start it up it now goes to a screen that says Blackberry Device Platform and lists everything instead of showing any icons or the homescreen.
I did a wipe hoping that would work and it didn't so now i've run out of options, can anyone help me?
It sounded like a good idea at the time....You will need to use JL_Cmder to wipe the device and subsequently load the OS to the device. Follow the instructions here:
http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
If JL_Cmder does not work, follow this instructional:
http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
When I open Fire fox I get 2 tabs. One is Google my Homepage and the other is Fire fox's page. I have tried all fixes under help and suggestions with no luck?
Also I want a new page to open in a Tab. I set it to and it defaults back to new window. Also tried all fixes? I have been using Fire fox since day1, I know it pretty well, never had a problem.
Thank You
DougThis is the reply I got from emailing Adobe.
Thank you for contacting Adobe Support. I am responding to you in refrence to your Web support request dated 13/05/2009 for assistence regarding the issue that video freezes in your computer in IE 8 and Firefox.I am extremely sorry for the inconveneince caused to you . I would have loved to assist you regarding this issue , however i will appreciate if you please register the Adobe product on our web site , WWW.ADOBE.com , which is neccessary for getting suppot. In any case you can always Browse our web site WWW.ADOBE.com for any type of product and support related information. Once you register the product do write us back issue .
Thanks and Regards
Deepak Adobe Support
Again, support people who have no idea how their system works, simply typing a stock answer. How do you register Flash, btw, since, oh, you cannot? -
Hello, I considering buying a 3 chip camera but my problem is I don't have a clue as to which 3 chip cameras work with IMovie. Why can't Apple just fix it so ALL Video cameras work with IMovie. Afterall, FCP and FCE will import footage from almost any DV camera. Why is it so dam hard for Apple to get IMovie to do the same? Its very frustrating because it diffecult to shop for a good 3 chip while risking that it won't work with IMovie.
Would someone explain this to me.
Rich
http://homepage.mac.com/richsheikh/Menu17.html
Emac Mac OS X (10.3.7)I've never had any trouble with Sony cameras, and the various 3-chip Sonys I've used ALL work with my setup - which is either PowerBooks or a Mac mini.
There often seems to be trouble noted here with G5 iMacs or G5 PowerMacs, but as I don't have one of those, I can't speak from experience. Couldn't tell you about an eMac, either, I'm afraid.
But, speaking from experience, I've never had any trouble, in any version of iMovie from 2 to 6, with a Sony TRV900 (..now discontinued..), TRV950, PDX10, FX1 ..and they're all 3-chip cameras. Never had any trouble with a 1-chip camera either, except a 330 Digital-8 when iMovie 5 first came out.
The 1-chip HC1 also works fine for me.
I haven't tried any Panasonic, Canon or JVC cameras with iMovie, so I couldn't tell you about them.
Like Dan, I've now ordered a G5 floor-stander ..so that I can import and export HDV faster.. and I'll let you know if I have any trouble using that with any of those camcorders.
But for now, all the Sony 3-chip cameras I've ever tried all work without any trouble at all in all versions of iMovie. As long as it has a FireWire connection it should work with iMovie.
I hope that helps.
[..By the way; nice movies, Rich..] -
This Lion wireless issue has become more than just an irritation, so much so, my wife has resorted to sitting in front of a 27 inch imac with a 300 dollar Walmart Windows computer to get the bills paid and use the web. And yes, there is not a fix out there I haven't tried over the last year or so, some worked and some didn't, but all were temporary at best. Same issue with my Macair, I wonder if its a hardware issue, like the video card in my 2006 MBP, it went out after the warrenty and then I found out there was a calss action suit going on over it, unfortunately Apple wouldn't cover it and wanted 7oo bucks to fix it, sold that as parts.
While i really like me Macs, I own three, I may have to bow out and stick with LINUX, that has yet to let me down, anyone know if Mountain will fix this issue? or are we all just waiting for defective WiFi cards to fail at our own expense, PS, got three Macs for sale.Sounds like you're getting kernel panics, which are usually, but not always, caused by hardware problems, with memory being one of the regular culprits.
First thing I would do is to get our your original OS X disks, insert the first one (should say 'AHT version x.x' in small print on the label - if not, find the one that does), and reboot holding the Alt key down. Choose the Apple hardware test, and when prompted, choose the extended test. If you have either of the TechTool programs, they can do similar testing. Does that identify any hardware issues?
Next, I'd download rember from http://www.kelleycomputing.net/rember/ . This is a memory testing program that you can set to run overnight. Does it come up with any errors? If so, try resetting your memory card(s) by removing and putting back into the computer. Rerun memory test.
This FAQ will provide other details: http://www.thexlab.com/faqs/kernelpanics.html -
Z-index-- image fixed/ text mobile
I'm a web developer student with 5 classes left before
graduation (with honors) and I've come to realize...I'm really not
ready for the workforce! GRRRR
I have a layer question. My page setup is as follows;
z-index 1 or 'OuterPanel' is position absolute, width and
height 100% // covers the full screen
z-index 2 is my 'WorkArea' relative, margin-left/right auto,
750px by 750px// keeps the active content centered
z-index 3 (which sets inside of z-index 2) includes multiple
div's that hold my positioning for text and pics.//absolute--fixed
to the 'WorkArea' --centered.
My question is, with this setup, can I lock a pic in position
(z-index 3) and still scroll text on the same z-index. I realize
that I can lock a background image in place, but I can seem to get
full control with image location when changing monitor size. Any
thoughts?> Any thoughts?
Sure - there are much easier ways to get centering pages,
none of which
involve the use of positioning at all. In fact, I see nothing
in your
requirements that would suggest the use of positioning.
> I want to be able to scroll
> the text down without the header or the pic moving.
The only way to reliably get this would be to use frames.
> I know that frames would fix
> this, but I've been told that frames are a security risk
and may not be
> supported by future versions of IE.
That's complete claptrap. Frames are NOT a security risk, and
there is no
suggestion (even a remote one) that any browser will not
support them.
Frames are a complete pain in the ***, for both you and your
client, but
they are not what you have suggested.
As far as I know, the most comprehensive discussions of
frames and their
potential problems can be found on these two links -
http://apptools.com/rants/framesevil.php
http://www.tjkdesign.com/articles/frames/
Thoughts? I would discard the idea of achieving the 'fixed'
image and menu.
People are quite comfortable with scrolling to get to those
things.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"bnther" <[email protected]> wrote in
message
news:[email protected]...
> Walt,
> Thanks for the feedback.
>
> ACE,
> My goal is ensure that an area of about 750px by 750px
stay centered no
> mater
> what the size of the monitor. I've seen too many
websites that are stuck
> to
> the left. They look alright on my 17" but not so hot on
my 22" wide
> screen.
>
> On this 750px by 750px 'WorkArea', I have a header with
a drop down menu,
> I
> have pic to the right and some text to the left. I want
to be able to
> scroll
> the text down without the header or the pic moving. As
it stands now, the
> entire page moves and I loose my drop down menu. I know
that frames would
> fix
> this, but I've been told that frames are a security risk
and may not be
> supported by future versions of IE.
>
> Any thoughts?
> -
Okay, after one and a half days of bad installs, error messages, and reading this board I've FINALLY gotten v5.0 to work on my XP system. How'd I do it? Well, I took ALL the fixes offered on this site and did them all at once. Here's what I did...step-by-step with instructions. By the way, I'm running a Dell Inspiron 2200 with Windows XP Home.
1.) Make sure you have the file "mapi32.dll" version 1.0.2536 in your /windows/system32 folder.
How do I check:
Click on you Start Menu in the lower left
Then click on "My Computer"
Then click on the "Windows" folder
Then click on the "system32" folder
Scroll to the "m"'s and put your mouse pointer over the "mapi32.dll" file, the version should pop up.
If you don't have this file there are some creative ways to get the file that people have posted on this support forum. Look into those ways.
2.) Make sure ALL of the following are "started": TCP/IP NetBIOS Helper, Windows Management Instrument, and WMI Performance Adapter.
How do I do this:
Click on the Start Menu
Move your mouse pointer to "My Computer", but don't click on it
RIGHT-click on "My Computer" and then choose "manage" in that menu
In the left hand panel double-click "Services and Applications", then double click "services" in the right panel.
Find those three files in the windows and click on them and make sure it says "Started" and "Automatic" next to the names.
3.) Download and install the stand alone Quicktime 7.0.2 player. You need this for iTunes to run. Here's the link:
http://www.apple.com/quicktime/download/standalone.html
Restart your computer.
4.) Download Bonjour for Windows from this link:
http://www.apple.com/support/downloads/bonjourforwindows_readme.html
NOTE: Before you start the install do the following(VERY IMPORTANT) DISABLE ALL YOUR ANTIVIRUS AND SPYWARE SOFTWARE. If you're running Norton 2005 right click on the system tray icon and click "disable Norton internet security" and "disable antivirus auto protect" make sure you do it until at least the "next system startup". I was also running Avast Antivirus so I had to "stop on-access protection". Those were the ones on my system, your system may be different.
Then run the Bonjour install and restart your computer.
4.) Download the iTunes install program from here:
http://www.apple.com/itunes/
ONCE AGAIN (VERY IMPORTANT) DISABLE ALL YOUR ANTIVIRUS AND ANTISPYWARE AS YOU DID FOR THE PREVIOUS STEP!!!!
Restart your computer when it's done.
This should work. For me, all the songs and playlists updated except for like 4 songs which said they couldn't be found. But when it asked if I would like to find the file I clicked "yes" and it lead me directly to the folder that had the song in it and when I clicked on the file the song started to play. I now had v5.0
I really hope this helps.Great instructions and iTunes installed with only one heart stopping moment when the XP error report window opened followed by the Microsoft Online Crash Analysis window that announced that I'd suffered a major hardware failure.
I don't think so.
What I did notice is that XP hung at the Welcome screen(I don't get the Welcome screen since this is a one person computer.)and then again after the desktop loaded but before the icons appeared (Something else it never does.).
The cause was the installer for this version of iTunes which definitly has problems.
iTunes is running fine now and everything updated correctly but I'm still ticked off about nearly being given heart failure.
Oh yes, it's easier to get rid of iTunes and QuickTime registry entries if you have Regcleaner : http://www.worldstart.com/weekly-download/archives/reg-cleaner4.3.htm
Quicktime especially leaves files scattered everywhere.
Maybe you are looking for
-
BIOS changes made by windows 8.1 without my knowledge
I am trying to have dual boot in my desktop so that i can login into Windows 8.1 or Ubuntu Linux. Everything is working fine except something very strange is happening. In my BIOS - boot order is getting changed by Windows. Even if i make it load ubu
-
How do I sort my whole spreadsheet based on one row?
I'm using Numbers on my iPad to inventory a school's computer systems. I'm kind of doing it slowly as I get time, so I'm not inventorying in any particular order. I just go in a room when I get a chance and then inventory everything in it. I have
-
While extracting the data from r/3 to bi, of payroll data source by filtering months in infopackage, the records are coming but the request is in yellow. the error message is 1. No assignment of payroll data to BW month for country grouping Messa
-
No ICF authorization CHECK for executing /sap/bc/bsp/sap/hap_document
In EP we are trying to access bsp and we are getting error ,User T000209 (client 350) has no ICF authorization CHECK for executing /sap/bc/bsp/sap/hap_document How to give authorization please help venkateswararao
-
Screensaver pics are pixelated & orientation is ignored
I recently upgraded to 10.5.2 and noticed that my screensaver that has always been set to iPhoto lIbrary seems to be changing and/or ignoring the picture orientation as viewed in iphoto as well as some pictures appear very pixelated. When I go to iph