All Flash FAS Makes the Grade for Enterprise

As businesses strive to achieve faster time to market and greater customer satisfaction, they must improve the speed and responsiveness from key business operations. IT leaders recognize the benefits of all-flash storage for delivering consistent, low-latency I/O to critical workloads. The right all-flash storage can yield significant benefits for your business by accelerating applications, speeding up important decisions, and increasing the satisfaction of end users and customers. Flash must be enterprise-grade to reach its full potential, and the All Flash FAS (AFF) 8000 series which ships with Data ONTAP FlashEssentials innovations, is designed for the enterprise buyer.

Its about leveraging the right architecture and optimizing it for flash to deliver an enterprise grade solution to take flash main stream!

Similar Messages

Netapp All-Flash FAS (AFF) – What Does This Mean?

by NetApp A-Team Member Glenn Dekhayser, Practice Lead, Office of the CTO, Red8
A bunch of my contemporaries have published excellent technical blogs on NetApp’s recent release of their All-Flash FAS systems and simultaneous massive reduction in the acquisition and support prices of those same systems. So there’s excellent new info on how great these platforms perform, and how their costs are now in-line (or better) than competitors who have been flash-focused for a while now. Assuming the performance is there (and based on performance numbers I’m seeing in real-world scenarios, it is), and those costs are well understood, does this development mean anything important to the storage or converged infrastructure market? You betcha.

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

I can not find a Flash version of the BIOS for HP Pavilion tx1320er.

Good day!
I can not find a Flash version of the BIOS for HP Pavilion tx1320er.
I can not start the laptop black screen at startup, all the LEDs are lit, read this bill is that it is written bios. The battery dropped does not help, when you turn to pressed keys windows laptop B responds uttering a sound. but I have no USB BIOS version, so just to be sure of the death of my laptop.
P.S. I write a google transleyt sorry for the errors of translation.

Hello,
What does "I tried the apt version of which doesn't download," mean? Are you trying to download from get.adobe.com/flashplayer or from Ubuntu's Update Manager?
BTW, I deleted your other thread. Posting the same topic in multiple threads doesn't help your issue get answered quicker and does lead to confusion in responding to two different threads.
Maria

When I try to install the 'GOOD for enterprise" app, I am getting error 0x100001 during retireve settings step. I followed the step of reloading the OS to fix this as suggested in another thread but even after that I have the same problem. Please help.

when I try to install the 'GOOD for enterprise" app, I am getting error 0x100001 during retireve settings step. I followed the step of reloading the OS to fix this as suggested in another thread but even after that I have the same problem. Please help.
Regards,
Nagarajan Kadhiresan

if you using the same port, maybe this issue caused by your kingmax
to make it fast, try your king max at other PC, if cant detect, please reformat your king max

Make the installer for my executable run the DAqcarddriver and runtime engine installer automatically

*Hi
I would like to know how to make the installer for my executable run the DAqcarddriver and runtime engine installer automatically
I would like to include run time engine and the drivers of my daqcard(AI16XE50),( and maybe Ni daq or anything else needed?) in order to make my application portable for other computers on OS win98 and winXP .
How can I do that
thank you in advance
Olivier

Olivier,
What version of LabVIEW are you using to build your application? On a remote computer you should only need the drivers you are using and the Run-Time Engine. You can attach installers to LabVIEW 8 installers, but for previous versions you will have to add it by opening the installer configuration page, configuring your installer and then configure the Advanced properties. This will allow you to attach a EXE to the installer which you can run. Also depending on the version of LabVIEW will affect the OS version that you will be able to install the RTE on. LabVIEW 7.0 is the last version that can be installed on Windows 98.
Please let me know if you have any further questions and please include the version of LabVIEW you are using. Thanks!
Andy F.
National Instruments

Hallo. My time machine cant do the backup. It cant make the folder for the safety-backup. How do I solve this?

Hallo. My time machine cant do the backup. It cant make the folder for the safety-backup. How do I solve this?

Have a look at Pondini's Time Machine information pages: http://pondini.org/TM/Troubleshooting.html

Hi All, Pls send me the recording for va01 by handling table control

Hi All, Pls send me the recording for va01 by handling table control with 3 or more materials. Pls send me a flat file and code ASAP.
Thanks&regards.
Bharat

Here is a example of similar kind ..plz go through this doc..it will be help hul 4 u
How to deal with table control / step loop in BDC?
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen,
our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number; (the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static
ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample, the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop.
Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new
" scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to <material>,
name2 to <quan>,
name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using <material> DataTable-matnr.
perform bdcfield using <quan> DataTable-menge.
perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
Sample code
Following is a sample code of handling table control in BDC.
REPORT Y730_BDC5 .
*HANDLING TABLE CONTROL IN BDC
DATA : BEGIN OF IT_DUMMY OCCURS 0,
DUMMY(100) TYPE C,
END OF IT_DUMMY.
DATA : BEGIN OF IT_XK01 OCCURS 0,
LIFNR(10) TYPE C,
BUKRS(4) TYPE C,
EKORG(4) TYPE C,
KTOKK(4) TYPE C,
NAME1(30) TYPE C,
SORTL(10) TYPE C,
LAND1(3) TYPE C,
SPRAS(2) TYPE C,
AKONT(6) TYPE C,
FDGRV(2) TYPE C,
WAERS(3) TYPE C,
END OF IT_XK01,
BEGIN OF IT_BANK OCCURS 0,
BANKS(3) TYPE C,
BANKL(10) TYPE C,
BANKN(10) TYPE C,
KOINH(30) TYPE C,
LIFNR(10) TYPE C,
END OF IT_BANK.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = 'C:\VENDOR.TXT'
FILETYPE = 'ASC'
TABLES
DATA_TAB = IT_DUMMY.
LOOP AT IT_DUMMY.
IF IT_DUMMY-DUMMY+0(2) = '11'.
IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).
IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).
IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).
IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).
IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).
IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).
IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).
IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).
IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).
IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).
IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).
APPEND IT_XK01.
ELSE.
IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).
IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).
IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).
IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).
IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).
APPEND IT_BANK.
ENDIF.
ENDLOOP.
LOOP AT IT_XK01.
REFRESH IT_BDCDATA.
perform bdc_dynpro using 'SAPMF02K' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-REF_LIFNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
IT_XK01-LIFNR.
perform bdc_field using 'RF02K-BUKRS'
IT_XK01-BUKRS.
perform bdc_field using 'RF02K-EKORG'
IT_XK01-EKORG.
perform bdc_field using 'RF02K-KTOKK'
IT_XK01-KTOKK.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-TELX1'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFA1-NAME1'
IT_XK01-NAME1.
perform bdc_field using 'LFA1-SORTL'
IT_XK01-SORTL.
perform bdc_field using 'LFA1-LAND1'
IT_XK01-LAND1.
perform bdc_field using 'LFA1-SPRAS'
IT_XK01-SPRAS.
perform bdc_dynpro using 'SAPMF02K' '0120'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-KOINH(02)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
DATA : FNAM(20) TYPE C,
IDX TYPE C.
MOVE 1 TO IDX.
LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.
CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKS.
CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKL.
CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKN.
CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-KOINH.
IDX = IDX + 1.
ENDLOOP.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-FDGRV'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFB1-AKONT'
IT_XK01-AKONT.
perform bdc_field using 'LFB1-FDGRV'
IT_XK01-FDGRV.
perform bdc_dynpro using 'SAPMF02K' '0215'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0220'.
perform bdc_field using 'BDC_CURSOR'
'LFB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0310'.
perform bdc_field using 'BDC_CURSOR'
'LFM1-WAERS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFM1-WAERS'
IT_XK01-WAERS.
perform bdc_dynpro using 'SAPMF02K' '0320'.
perform bdc_field using 'BDC_CURSOR'
'WYT3-PARVW(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
CALL TRANSACTION 'XK01' USING IT_BDCDATA
MODE 'A'
UPDATE 'S'
MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.
FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
Reward if helpful

Hi i have a iphone5 I lost my password ha possibility I make the switch for 5s can not open the icloud?? if accepted as pay the difference? thank you for it helped.

hi i have a iphone5 I lost my password ha possibility I make the switch for 5s can not open the icloud?? if accepted as pay the difference? thank you for it helped.

Post in your native language. Your post is very difficult to understand. What password are you talking about? You device passcode? Your Apple ID password?

I'm still new to apple. I have a prompt that two of my apps have updates. Will it tell me if the update is free or has to be paid for? All I see is the button for "update"

I'm still new to apple. I have a prompt that two of my apps have updates. Will it tell me if the update is free or has to be paid for? All I see is the button for "update"

Automatic updates that look like this do not add cost beyond what you originally paid:
This is how Apple delivers the patches and updates that are detected to apply to your system.
Did iy look like something else?

The requirements for Enterprise Signed viewer app

Hi,
The requirements for Enterprise Signed viewer app are iOS Developer Enterprise Program and DPS Enterprise Edition?
It is possble to built an Enterprise Signed viewer app rith DPS Professional Edition?
shimoawazu

You need DPS Enterprise Edition and iOS Developer Enterprise program to create enterprise signed builds. You cannot create Enterprise signed builds using DPS Professional Edition.

The Business Opportunity for All Flash FAS: A Q&A with Bill Lipsin

In advance of today's flash announcement, we sat down with Bill Lipsin, VP Worldwide Channel Sales, NetApp to get his perspective on the news for partners.

In advance of today's flash announcement, we sat down with Bill Lipsin, VP Worldwide Channel Sales, NetApp to get his perspective on the news for partners.

I am using the Good for Enterprise app to synch my outlook email and when I try to turn on ICloud to synch my music in ITunes I get a warning that I will not be able to synch my Iphone 4S with my computer. Does this mean my office PC or home Mac?

I am using Good For Enterprise on my Iphone 4s to connect with my Office PC Outlook email system. I am having trouble synching my Itunes music from my Mac at home with my IPhone 4s. I am considering using ICloud to share the music as I also have an IPad2. When I go to turn on the ICloud application, I get a message that alerts me to the fact I will no longer be able to synch with my computer. Does that mean with my Office PC and my Outlook email, or my Mac and my home email and other applications? I want to use the ICloud but don't want to screw up my Good for Enterprise application and connectivity with my Office PC and Outlook email. What should I do to be able to update all my tunes and photos on my IPhone 4S and IPad2 from my Mac?

I seem to never tire of saying this. It was for Apple when they first announced 10.7 to disclose this. Yes, it was widely reported -- or rather, rumored -- but not by Apple. And many people who have gotten caught by this assumed that Apple itself would have told them beforehand about the loss of this very important feature which they had come to rely on. As far as I know, not even in fine print, does this appear anywhere on the Lion announcement or any of its links.
I am not saying Apple had to continue Rosetta in Lion, or forever, just that if it was going to be dropped, it should have been made known.
As relative "insiders" we should not forget that many people don't have the time, habit or interest to do this kind of research. I think it is a breach of trust that Apple has never directly made this announcement or given people the opportunity to decide beforehand if giving up their PPC apps for a new OS is a worthwhile tradeoff.

Trying to make the config for gensplash suppost :S

Hello everyone im trying to patch the stock kernel of arch to get fbsplash working and im following the wiki topic about this matter http://wiki.archlinux.org/index.php/Gensplash , but the problem is that it it says i need to make the config with this options
Which ever method you choose but be sure to choose the following settings at the config stage:
Device Drivers
Block Devices
RAM disk support (BLK_DEV_RAM) = Y
Inital RAM disk (initrd) support(BLK_DEV_INITRD)=Y
Graphics Support
Support for framebuffer devices (FB) = Y
VESA VGA graphics support (FB_VESA) = Y
VESA driver type
vesafb (FB_VESA_STD) = Y (see note 1)
vesafb-tng (FB_VESA_TNG) = N (see note 2)
"Card Specific" display support (FB_"CARD") = N (see note 3)
Logo Configuration
Bootup logo (LOGO) = N
Support for the framebuffer splash (FB_SPLASH) = Y
and im making the config with xconfig , but i cannot find some options like for example
VESA driver type
vesafb (FB_VESA_STD) = Y (see note 1)
vesafb-tng (FB_VESA_TNG) = N (see note 2)
"Card Specific" display support (FB_"CARD") = N (see note 3)
so rite now im thinking that maybe this options changed of subcategory or they do not exists anymore , i dont know :S
maybe some of you would like helping me on finding this options as i think if they are not enabled the hole building process will end up on a not vesafb enabled kernel
thanks for any help

The VESA driver type selection is only available if you also apply the vesa-tng patch, which is included in beyond, but is not necessary for gensplash. In other words, you can safely do without them.
"Card Specific" display support refer to the options immediately after VESA VGA graphics support in the kernel config i.e. card-specific framebuffer drivers such as nvidiafb or radeonfb. Just make sure they are all turned off.

Block all websites apart from the homepage for all users. Citrix environment with Server 2003.

Citrix Xenapp 5 and Windows server 2003 environment. We want to force Firefox to kiosk mode with a pre-set homepage for all users. I also want to lock this to only one website. I have managed to set up the kiosk mode with R-Kiosk addon and Mozilla.cfg file. I am trying to use BlockSites to block all internet sites and only allow the one site with the whitelist option. I can get the addon to install for all users, but can’t get the default settings across. I have tried to add this with the Mozilla.cfg file, but it looks like this addon is getting it’s settings from the profile folder. If I set the preferences for the addon in Mozilla,cfg file, it actually picks it up but it doesn’t apply it to the addon for some reason. Does anyone have any other ideas on how I can lock this down to the one site?

I am not entirely sure how to do this, but the enterprise community would be a good place to ask. They have a email group you can ask on this page: [https://www.mozilla.org/en-US/firefox/organizations/faq/]

HT1752 I both one Mac Pro 15" March 2009 and five month ago I have to change the harddrive and put some actional memories, since I have to make the upgrade for Lion IOS. Now the motherboard fails. What should I do or expect from Apple to solve this probl

Hi everyone. I both a Mac Pro 15" in March 2009. Five month ago I was forced to buy by one new hard drive and extent the memory, because I had to make the upgrade (and pay) to install the new Lion operation system. Four days ago the Mother-board fails. To change it will cost a fortune. What should I do or expect from Apple to solve this problem? I am very disappointed because my trust on Apple was destroyed.

I am not sure why you are upset with Apple. Electronics equipment does fail. If the product is out of warranty or you do not have AppleCare there's not much you can do with Apple. Apple will charge you for the repair. Suggest you look for a third party repair store since they are usually less expensive than Apple. Alternatively you can buy one for about $850US and install it yourself. Sorry, but there aren't many choices in this situation.

All Flash FAS Makes the Grade for Enterprise

Similar Messages

Maybe you are looking for