All Folders Un-Nested After Enabling/Disabling Restrictions

I have a new iPhone 6 Plus (128gb). Today, I enabled restrictions in order to see what type of settings are available. After about 2 minutes, I disabled "restrictions" and then went to take a shower. When I was done, I unlocked my iPhone and immediately noticed that all of my app icons were spread across multiple pages - in other words, all of my folders became undone and now all apps were individually spread out! I'm running iOS 8.1.2

Yes, all the data since you made the latest backup will be set back as well.
You can also reorganize your folders in the app pane in iTunes and sync after that.

Similar Messages

Links in emails are not opening.. Have tried rebooting, enabling/disabling restrictions in settings but all in vain! Any help or suggestions would be gladly welcomed.

Anyone know anything about getting links to open in emails? It's as though links are just not responding.. Have tried settings/general/restrictions and enabling / disabling but to no avail.

A few more things you could try:
Settings->General->Reset->Reset All Settings...you will then have to log back into your wifi network
If you have access to your router's settings you could try changing the channel your network is on.
Try changing the password/key of your router...a bit of a pain since all other devices will have to login again but sometimes it can help with connectiviity issues.
Also, this article may help to troubleshoot your home wifi setup:
Recommended settings for Wi-Fi routers and access points - Apple Support

Enable/Disable buttons in Portal.

How are buttons in EP 2004s enabled/disabled? Not in the toolbar but in the iViews. Such as Account Sales Area, we had a button "Additional Sales Areas" enabled, but now it has become grayed out.
Is the enabling/disabling of buttons a PCUI issue that needs to be handled through DynPro or SPRO, or an authorizations issue that needs to be handled in the CRM backend system?
In this particular scenario the "Additional Sales Areas" button is also disabled in the GUI, but there are others such as a "print" button where it is only disabled in the PCUI.
Any help with this or documentation on how to enable buttons would be much appreciated.
Thanks!

Buttons are coming from the PCUI applications, check out the following weblog
People-Centric User Interface (PCUI) - Getting Started...
'The Book' contains all the details. For enabling/disabling the buttons either you can change in the blueprint tables or use the blueprint application builder.
Check out the CRM forum you will get all the details

I enabled my restrictions and then disabled them succuessfully, but in the process I lost all my folders that my apps were defined into. The apps are there but the folders don't exist anymore, please help.

I enabled my restrictions and then disabled them succuessfully, but in the process I lost all my folders that my apps were defined into. The apps are there but the folders don't exist anymore, please help.

You may want to try restarting to see if that has any effect Turn your iOS device off and on (restart) and reset

Accounts getting disabled after enabling password expiration on BOXI R2 SP2

Hi All,
We have a strange issue with our production environment.After enabling password expiration on the enterprise some accounts got disabled,on further investigation I found that these users were either trying to log on to Designer or 2 tier Deski.
I made them login through the Infoview to fix the issue.These users were Universe deginer or report writers.
Any Suggestions

Hi Tim,
These accounts are Enterprise accounts,according to the users they were not given a chance and they never got any prompt for the password change it was disabled directly at the first login.
These people were trying to logon using the Desginer or 2 Tier DESKI login and they are the members of the Administrtor Group also.
Is it important to logon to infoview or 3 tier DESKI to change your password?
I have no answer to give them why there accounts were disabled.
Please suggest
Thanks,
Arun

Except Outlook folders' system, all other suddenly disappear after a custom backup

As I don't trust Microsoft, a have prepared a daily backup for the PST files onto a different location on the local drive as well as to a network drive in the office. The backup is a BAT file with xcopy command. The BAT instructs Outlook to close through
taskkill command before starting copy.
As soon as the backup finishes, Outlook is opened (through 'start Outlook.exe'). The backup system works fine. However,
SOMETIMES, when the Outlook opens, all the folders, except those of the system (Inbox, outbox, etc) , simply disappear!! At this very moment, my colleagues in the office fear having lost all the e-mails. I just ask them to close and re-open
Outlook then the folders come back uneventfully.
Can someone from Microsoft explain why the folders disappear? It is quite strange because it does not happen in certain computers (we have fifteen in the network), but randomly.
If it help, we use POP3 and all computers retrieve e-mails from at least ten different email accounts being all of them filed in one only PST file.
We used to use Windows Mail on Windows 7 (of course through a tweaking) and now we migrated all e-mails to Outlook as it appears to be more professional for many reasons. But, once more, I'm fearing that it may be not so good.
Rogerio Martins

Hi,
Since it doesn't really cause the emails/folders to lose, and not all computers have this problem, I may assume if it's 3rd-part add-ins caused the folders not display at the first start.
Have the users start Outlook in Safe Mode, if the issue will never reappear in Safe Mode, disable the suspicious add-ins to verify my assumption.
Start Outlook in Safe Mode:
Press Win + R and type “outlook.exe /safe” in the blank box, then press Enter.
To disable add-ins:
1. File -> section Options -> section Add-Ins
2. At the “Manage” dropdown list at the bottom select which type of add-ins you would like to enable/disable
3. Press “Go…” and make the changes
4. For some add-ins you’ll need to restart Outlook for changes to take effect.
Regards,
Melon Chen
TechNet Community Support

After enabling cellular data, i am receiving mails even if disable "use cellular data for mail", due to this data usage usage use is more, if we have fix please let me know

Phone Model and OS
Model - iphone 5
IOS 8.0.2
Problem Description
After enabling cellular data, i am receiving mails even if we disable "use cellular data for mail", due to this data usage usage use is more, if we have fix please let me know.
Steps:
1. Enable Cellular Data
2. Disable mail on "use cellular data for mail
3. check whether mail is received or not
tried multiple times and i am getting more billing amount because of data usage

Mail isn't the only app using data. Turning it off there has no effect whatsoever on whether the rest of iOS or other apps you have installed. In fact most apps use data these days, at a minimum for Notifications and often for gameplay and other features.

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there

Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder., Is there a way to separate raw files from jpegs that are in one folder after downloading from camera when you shoot both together. I tried arrange or sort by kind but that does not work. It arranges all folders but not the files in the folder.

Bridge will do the job. View > Sort > ByType. Then you can choose a group of one type and put the files in a separate folder.

I have upgraded from 10.5 to 10.6 and found that all folders/files/pics have pixelated (either white or black) patterns on them. But it turns out fine when i open up the affected files/folders/pics. And this phenomenon persists after updating software.

I have upgraded from 10.5 to 10.6 and found that all folders/files/pics in my disk drive have 'dotted' (either white or black) patterns on them. But it turns out fine when I open up the affected files/folders/pics. And this phenomenon persisted even after updating to the latest software. I proceeded to upgrade to 10.8 and updated the latest software thinking that this might resolve the problem but still stays the same way as it was. Could it be the Adobe flash player that is causing this problem? Please help.

this posting shows how to migrate wiki. http://discussions.apple.com/thread.jspa?threadID=2205892
I did it and it worked.

Enabling/disabling the 'display PDF in browser' via a script after Reader 9 is installed

So we have Reader 9 already installed on the machine, but we need a simple way that a user can click on a shortcut in the start menu to reconfigure how the PDF is opened - either from within the browser or outside of the brower.
In Reader 7, I was able to use this:
msiexec.exe /i {AC76BA86-7AD7-1033-7B44-A71000000002} Remove=ReaderBrowserIntegration /norestart /qb-!
msiexec.exe /i {AC76BA86-7AD7-1033-7B44-A71000000002} ADDLOCAL=ReaderBrowserIntegration /norestart /qb-!
which works well after the fact that Reader 7 is installed on the machine.
For Reader 9, things have changed, and have tried this:
msiexec.exe /i AcroRead.msi /qn DISABLE_BROWSER_INTEGRATION=YES
msiexec.exe /i AcroRead.msi /qn DISABLE_BROWSER_INTEGRATION=NO
The above don't work, nor if I run a repair instead of an install. I also tried to modify the HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\9.0\Originals\bBrowserIntegration then following in up with the appropriate msiexec command and that didn't work
No, asking users to go to the options and enable/disable the setting isn't ideal unfortunately as it requires too many clicks
Anybody have any suggestions on this?

Try this forum:
http://forums.adobe.com/community/acrobat/acrobat_enterprise_install

Video sync problem in vista premium 32bit even after enabling all movies

video sync problem in vista premium 32bit even after enabling all movies and or movies.the vids are in itunes and ive tried to sync again and again.with no luck .
and i cant seem to find a related or symular problem. has anyone else had this problem?

cbeer77 wrote:
Not sure how to find out the GPU acceleration
Edit > Preferences > General
If GPU acceleration is checked, uncheck it and see if that helps.
Also:
Could you give us a Mediainfo or Gspot screen shot of what's in the AVI wrapper?
Please answer Richard's question.

After upgrading to 3.1 - 3G Enable/Disable option gone!!!!!!

Hi all!
Wow - so much trouble for a software upgrade
I've upgraded my iPhone 3G (legal one - read: not jail broken or anything ) to 3.1 and now the switch which will enable/disable 3G network is gone ( I just don't get it ). I've tried to do a restore to a new phone: no luck, I've tried to downgrade to 3.0 ( iTunes 9 ) ... absolutely no luck whatsoever. This is just great. Now my iPhone will constantly flicker between "E" and "3G", and thereby consuming a lot of battery just switching between networks.
Anyone else with this issue?

Hi all!
I think I have a 'fix' for the issue. As it turns out, my local carrier "3" are somehow experiencing this on several iPhones at the moment starting this morning Sep. 10. So, I guess I'm not the only one. Which is nice.
So, it's a carrier problem, not a messed up update.

All folders in import menus for After effects are greyed out since upgrade to Mavericks

Since upgrading to Mavericks yesterday - all folders in the import menus (and save menus) are greyed out. I cannot access sub folders or even import a .mov directly from the desktop. All files and folders are greyed out.
I can use the "Open with" command on indivdual files which seems to work, but it's very inconvenient when working with multiple files.
Any ideas?
I have patched After effects with the 12.01 bug fix already...

Solutions on this page helped me! Bloody view options..... why do this for an OS release...https://discussions.apple.com/message/23567197?tstart=0#23567197?tstart=0

After getting a txt message from bell today saying I went over on my data usage , I can not access my web browsing at all... There is no restrictions on my account. But I still can't load safari

After getting a txt message from bell today saying I went over on my data usage , I can not access my web browsing at all... There is no restrictions on my account. But I still can't load safari... I can still makes calls and send txt messages but I can't send iMessages

Settings > General > Reset > Reset Network Settings.

Outlook 2010 duplicates mail with setting Leave mail on sever, Delete After n days and pressing Send/Receive All folders

The setting Leave mail on the server and Delete after n days and Pressing Send/Receive all folders causes outlook 2010 to duplicate all mails of the last n days over and over again.
If I leave outlook 2010 open this problem does not occur, mail will be retreived without a problem. If I leave Outlook 2010 open for a long time and then press Send/Receive all folders it does work ok. If I restart Outlook 2010 and then press Send/Receive
all folders the problem occurs.
The pst file is a new one. OTher mail accounts that do have Leave mail on the server but not Remove after n days do not have the duplicating behaviour.
I have manually removed 6400 duplicate mails, if Microsoft does not solve this urgent problem soon I need to remove Office 2010 from my computer and go back to Office 2007, Office 2007 worked fine for me.
Is there a solution fir this problem, or a free tool to remove all duplicates?

Dear Pieter,
I suggest creating a new Outlook profile, and create the problematic account in the new profile, to see if the problem occurs.
Here are the detailed steps on how to create a new profile to test this issue
==============
1.    Exit
Outlook.
2.    Go to
Start > Control Panel, click or double-click
Mail.
Mail appears in different Control Panel locations depending upon the version of the Microsoft Windows operating system, Control Panel view selected,
and whether a 32- or 64-bit operating system or version of Outlook is installed.
The easiest way to locate
Mail is to open Control Panel in Windows, and then in the
Search box at the top of window, type Mail. In
Control Panel for Windows XP, type Mail in the
Address box.
Note    The Mail icon appears after Outlook starts for the first time.
The title bar of the Mail Setup dialog box contains the name of the current profile. To select a different existing profile, click Show Profiles, select
the profile name, and then click Properties.
3.    Click
Show Profiles. Choose Prompt for a profile to be used.
4.    Click
Add.
5.    Type a name for the profile, and then click
OK. Please also follow the onscreen instructions to create the email account in this profile.
6.    Start
Outlook, and choose this new profile.
If this problem does not occur in the new Outlook profile, the old Outlook is corrupted. We can delete that and use a new Outlook profile.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Best Regards,
Sally Tang

All Folders Un-Nested After Enabling/Disabling Restrictions

Similar Messages

Maybe you are looking for