"All" Hierarchy in BPC

Hello Everybody,
I have a doubt about updating a hierarchy in SAP BPC, and I need your help.
I'm working with SAP BPC 10.1, and I need to create a hierarchy in a dimensión that is not hierarchized in BW, so I can't import it.
I remember that working with BPC 10.0, I created a hierarchy with a transformation file, making a mapping for all members to "All" in this way.
------ TRANSFORMATION FILE ------
*MAPPING
NODENAME = ID
HIER_NAME = HIER_NAME
PARENT = PARENT
ORDER = ORDER
IOBJNM = IOBJNM
VERSION = VERSION
*CONVERSION
NODENAME = CONVERSION_HIER_CECO.xls!HIER
------ CONVERSION FILE --------
EXTERNAL INTERNAL FORMULA
* All
I have tried this option in SAP BPC 10.1, but it doesn't work. Somebody knows why this method is not valid?
Since this way is not working, I have tried to make a script logic to fill the hierarchy, but I've never made a script logic. The one i've made is:
*WHEN P_DEST_MER
*IS DISTINCT (All, Dummy)
*REC (Parenth1 = All)
*ENDWHEN
It seems so simple, so I think i'm doing several things bad, Could somebody help me?
Thank you in advance
Best regards

Hi Antonio,
You need an ABAPer to code it for you.
have a look at this document.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50c39fa1-6f95-2d10-2a95-b594de8e1bb7?QuickLink=index&…
Andy

Similar Messages

How to create hierarchy in BPC NW 7.0 for a child which has two parents ?

I need to create a hierarchy in which some of the children have 2 parents (only some, not all of them). I tried using two columns - parenth1, parenth2. but it would not permit me since I cannot leave p2 blank for those children which have only one parent. If I try putting in p1 and p2 same for such children, then I get an error saying duplicate.
Please advice.
Tagz

How do you expect this roll-up to work numerically? Do you want ACCOUNT1 to be counted twice at the Child level, or do you expect it to cancel out (like it would in a BW hierarchy)?
I'm curious about the structure of your P&L that leads you to want this type of display. I have seen a lot of P&Ls and I've seen this requirement a few times, but usually you can meet it by recognizing that the P&L hierarchy and the reporting structure are separate. In this case we can often re-factor a single reporting structure with this type of roll-up into two or more separate P&L hierarchies, or we can use calculated accounts to provide for a more flexible reporting structure.
In any case, the scenario you describe is not possible using a single account and a single hierarchy in BPC. You can do one of the following (I'm probably missing an option):
1. Use two hierarchies or more hierarchies, to model alternative roll-ups of the base accounts into your different P&L formats.
2. Use a single hierarchy and another account and a script logic to copy the value of ACCOUNT1 to the new account.
3. Use a formula account to automatically copy values to a different spot in the existing hierarchy (will not roll-up)
Cheers,
Ethan

Error while use year hierarchy in BPC

I want to use year hierarchy in BPC to use all the periods, as we can not use multiple selection. While doing this I get error in function. Please let me know solution, if you also encountered same.
Anil Agrawal

Hi Guys,
I used Transaction code SLG1 (Analyse Application Log) and found the below mention error message and passed MDX Statement against my report:
MDX statement error:"Error occurred when starting the parser: timeout d"
Message no. UJQ_EXCEPTION000
Detail command mention in the Log
WITH MEMBER [Measures].[PERIODIC] AS 'IIF([/CPMB/OSD0KRY    PARENTH1].[2/CPMB/ACCTYPE]="INC",-[Measures].[/CPMB/SDATA],IIF([/CPMB/OSD0KRY         PARENTH1].[2/CPMB/ACCTYPE]="EXP",[Measures].[/CPMB/SDATA],IIF([/CPMB/OSD0KRY         PARENTH1].[2/CPMB/ACCTYPE]="AST",([Measures].[/CPMB/SDATA], CLOSINGPERIOD([/CPMB/OSD00QW       PARENTH1].[LEVEL02])),IIF([/CPMB/OSD0KRY                 PARENTH1].[2/CPMB/ACCTYPE]="LEQ",-([Measures].[/CPMB/SDATA], CLOSINGPERIOD([/CPMB/OSD00QW                 PARENTH1].[LEVEL02])),-[Measures].[/CPMB/SDATA]))))';SOLVE_ORDER=3
SELECT NON EMPTY{[/CPMB/OSD0KRY            PARENTH1].[CE0004010],
[/CPMB/OSD0KRY            PARENTH1].[CE0004020],
[/CPMB/OSD0KRY             PARENTH1].[CE0004000                       /CPMB/OSD0KRY]} ON 0 FROM [/CPMB/OSMSPHA/!!O/CPMB/OSMSPHA] WHERE (
[/CPMB/OSD0BYR].[C9000],[/CPMB/OSD0N1Z].[PLAN],[Measures].[PERIODIC],[/CPMB/OSD00QW                 PARENTH1].[2011.JAN])
In this report CE0004010 and CE0004020 are child of the CE0004000 Account Dimension.
Diagnosis
Failed to start the MDX parser.
Hope these debug will help to other member to respond the solution.
Thanks,
Anil

How to make All Hierarchy Nodes expanded as default in BI 7 Report

Dear all,
Does anyone know how to customize the confiugration to make <b>All Hierarchy Nodes expanded as default in BI 7 report</b>? Any sugguestion are appreciated.
Best regards,
Gerald

find the solution

Printing a Dynamic Hierarchy in BPC 5.1

Hi,
I am trying to print the graphic representation of a dynamic hierarchy in BPC 5.1. There is no apparent way to print the hierarchy from the DHE and when I check the documentation, they suggest the use of a EVDRE report. However, based on my testing, I can't seem to see any function in EVDRE that would be able to pull the graphical representation of the org structure that I have keyed into DHE out. Am i missing something here? Appreciate any help and feedback, thanks.
Best Regards
Adrian Yeo

Hi Adrian,
We have the same problem. We need to have a report with the perimeter (DHE) of the companies as intuitive and graphical as possible. Have you solve your problem?
any idea of someone?
thanks,
Jorge

Design Studio : How can I expand all hierarchy at once in dimension filter

Dear Colleagues.
I am currently working on design studio. I need your advises to implement BW hierarchies in my dashboard.
Is it possible to expand all hierarchy in Dimension Filter of Design Studio?
I tried to expand hierarchy in data source api, like 'expandNode' or 'setDrillLevel'.
These functions can be expanded all hierarchy in Cross tab. but it can not be applied to Dimension Filter.
Please help me to achieve this.
Thank you in advance.
Best Regards,
K.Min

I don't see a way to achieve this with the Dimension Filter or the Filter Panel
I think it would be a great idea to add to Idea Place at ideas.sap.com

Dynamic Hierarchy - SAP BPC 7.5 MS

Hello everyone. I am running SAP BPC 7.5 on the Microsoft Platform.
The issue I am running into is that I have children entities that have two parent entities. The Entity Dimension has our traditional organization chart. However, our reports require an alternate hierarchy.
Example:
Company A is a child of Company ABC in the org chart
however for reporting purposes
Company A is a child of Company XYZ
I need to pull in company XYZ in the report so that Company A is reported as being a part of it.
I need to be able to set up something using a dimension property that will allow me to pull in this hierarchy into our reports, WITHOUT using expansions.
The reason I cannot use expansions is some of the report will use the traditional org chart and the other portion of the report will use the alternate hierarchy.
I there some way to do this without using expansions?
I have setup a dimension property called "GROUP" that identifies the alternate hierarchy. However, the only way I know to pull it in the report is through the use of expansions in the "MembersSet" filter.
I have also tried to use the "Dynamic Hierarchy Editor" only to discover that you have to define hierarchies for specific time periods, and still use expansions.
Any suggestions? I feel like I am missing something.
Thank you in advance.
Will

Hi Will,
From what you describe I think an alternate (second/ H2) hierarchy is needed.
You can try adding a second hierarchy to your Entity dimension member sheet (PARENTH2) to see if that meets your requirement.
You can only create reports that have a hard-coded row or column key range or a dynamic row/column key range defined in the memberset field.
HTH,
John

Breakdown in a hierarchy in BPC?

Hi Experts,
I'm quite new to BPC and I'm wondering if planning or making breakdown through a hierarchy is possible.
This is my problem. I have an article and want to make a breakdown to the different components of it. The components are in a parent-son relationship in the hierarchy. When I want to execute the breakdown, or save the application, I'm told it is not possible. Is this true? How can I make a breakdown or an allocation work in a BPC hierarchy?
Thanks in advance.
Cheers,
Àlex

Hi Experts,
I'm quite new to BPC and I'm wondering if planning or making breakdown through a hierarchy is possible.
This is my problem. I have an article and want to make a breakdown to the different components of it. The components are in a parent-son relationship in the hierarchy. When I want to execute the breakdown, or save the application, I'm told it is not possible. Is this true? How can I make a breakdown or an allocation work in a BPC hierarchy?
Thanks in advance.
Cheers,
Àlex

All Hierarchy selection in Infopackage

Hi Everybody.
Can anybody help me in selecting all the available hierarchy in infopackage for hierarchy extraction.
Thanks n regards
Raghavendra D

Hi everybody.
I manage to do that by ABAP using BAPIs.
Pre-condition:
You have to first create an InfoPackage, and click the button of "Available Hierarchies from OLTP". After that, mark those you'll want to load data in the option "Relevant for BW". Save the InfoPackage.
Create the following program in transaction se38:
+*&----
*& Report ZAUTO_CHANGE_IP                                             *
REPORT ZAUTO_CHANGE_IP                         .
DATA: S_HIER_PAR type BAPI6109HIE.
DATA: count type i.
DATA: I_T_RETURN type BAPIRET2 occurs 0,
      S_RSOSOHIE type RSOSOHIE occurs 0.
field-symbols: -HIECLASS.
Executa BAPI BAPI_IPAK_CHANGE
Altera a selecção da hierarquia
CALL FUNCTION 'BAPI_IPAK_CHANGE'
EXPORTING
    INFOPACKAGE = IPCKGE
    HIE_PARAMS = S_HIER_PAR
TABLES
    RETURN = I_T_RETURN.
if sy-subrc = 0.
Executa BAPI BAPI_IPAK_START
Executa o InfoPackage
    CALL FUNCTION 'BAPI_IPAK_START'
    EXPORTING
      INFOPACKAGE = IPCKGE
    TABLES
      RETURN = I_T_RETURN.
    if sy-subrc = 0.
      if count = 10.
        count = 0.
        WAIT UP TO 60 SECONDS.
      endif.
    endif.
endif.
count = count + 1.
endloop.
+
When you execute the program you'll have to insert the technical name of the datasource where the infopackage is created and the technical name of the infopackage.
The program loads all the hierarchies and it sleeps after 10 requests by a minute so it won't consume all the processes.
Change it as you like.
It worked for me, because i want to load 913 hierarchies, and this is the better and faster way.
Best wishes,
Diogo from Portugal.

Selecting all hierarchy nodes in the report

Hi Friends,
In my report I have a Hierarchy 0ORGUNIT, there are a few sub nodes under this hierarchy.
When the user runs the report if they want to see all the nodes under a top node, they have to expand each node till the last node and select them one by one.
My question is, is it possible to select all the sub nodes under a node just by selecting the top node?.
If yes can someone please let me know how to do this?.
I did check the sdn, but could get anything.
Thanks in adv.
Regards
BN

Hi,
You can do that for the initial display i.e. the very first time you execute the query but once you collapse all the nodes you will not be able to expand all the nodes with one click.
For showing different levels in the first display go to the characteristic properties on which you have hierarchy maintained, in the hierarchy properties section set the option 'Expand to Level' and hierarchy will be expaned for all the nodes till the level you select.
Regards,
Durgesh.

Issue in loading Vendor Hierarchy in BPC 7.5 in NW version

Hi Gurus,
I am using BPC NW version 7.5.
I am automating vendor master data for loading Ids in BPC dimension.
My BI infoobject (0Vendor) has no Hierarchy.It has only Member ids.Business Requirement is to populate Hierarchy as Defaulf as ALLVENDOR.
By using the DM in BPC i loaded Member ID sucessfully in the BPC Dimension.
Please guide me with steps for populating Hierarchy as Default (ALLVENDORS) in the Parent1 column in BPC dimension.
Thanks In advance.
Mahesh

Scott,
Mapping the hierarchy in the transformation file via PARENTH1=*NEWCOL(ALLVENDORS) gives an error message 'Hierarchy is not allowed to be created by mapping PARENTH1'. So I think the only way of maintaining default PARENTH1 values - besides loading from a hierarchy - is to populate it via the Excel BPC dimension maintenance. Which can be cumbersome, specifically if a lot of new members get added frequently to a dimension and the dimension sheet each time needs to be manually updated. The only other way I can think of is to create an ENDROUTINE BADI for this which I am not sure if it allows to populate PARENTH1.
Regards,
Lars

Show all Hierarchy Nodes

Hello,
i need to show all nodes of a hierarchy even if there are no values on some of the nodes.
what adjustments do i need to make to show them all?
thx

Hello,
I'm trying to learn about hierarchies & several of these postings are taking me to sap help portal. Once I'm there it goes to CA Drilldown Reporting & it sounds like allot of cool features but I don't know what this is etc...
I'm familiar with the BEX Reporting Tool.
Can someone tell me what CA Reporting is?
Thanks,
Tammi

BPC 10.0 - Hierarchy Issue

Hi Experts,
I am trying to load a hierarchy to BPC 10.0 and I am having issues.
I am getting the error:
"HIERARCHY DATA SOURCE:
An exception with the type CX_SY_RANGE_OUT_OF_BOUNDS occurred, but was neither handled locally, nor declared in a RAISING clause Part - field access (offset = 4, length - 10) to a data object of the size 11 exceeds valid boundaries.
model: CONSOLIDATION
Package status: Error"
We are going through an upgrade and this was one of my test cases to try. I have all the hierarchy information filled out on the set selection screen (no blanks).
I also tried peeling back the number of levels, and the first 3 loaded successfully, it was the 4th and beyond that would cause this.
In my conversion file I have the first four digits ignored from these values at the 4th + level but it is still considering it all over 10.
One example is "CIGMC500000" so CIGM would be ignored but it is still not allowing it to load.
The prior version we had with this never gave us this problem. Is there a way I can change the hierarchy allowance for the H1 length?

Hi Ryan!
Have you set a condition in your conversion file that the length only can be10 positions or lower?
The example you gave is 11 positions long , even if you remove the 4 first positions the lenght from the BW side will come as 11. So what I think you have to do is to correct your conversion file sop it will allow length above 10 postions.
Please if this dont help, share your conversionfile
Br
Patrick

BPC 10.0 NW - skipping in hierarchy upload

Hej Gurus
I have a question regarding automatic upload of a hierarchy from BW into BPC. We have a hierarchy with all costcenters including both active and inactive costcenters, and these costcenters are spread out through the hierarchy.
In BPC, we only need the active costcenters, but the inactive is needed in other applications, so it is not possible to change the hierarchy.
Is it possible to do a skip based on a BW attribute, when importing a hierarchy or is it possible to make it only look at costcenters in BPC?
Alternatively, is it possible to pick up the parent in the master data attribute/text from BW process chain? In this it is possible to skip based on an attribute.
Best regards,
Mikkel Kristensen

Hi Mikkel,
As suggested by Gersh, you have to consider that point.
Coming to the you problem you can crated additional hierarchy for BPC to existing info object by considering only active CCs with the help of ABAP. You can also automate this hierarchy creation.
While loading master data you can load only active CC by selecting option "Set filters by attribute AND hierarchy" and while loading hierarchy select custom hierarchy created for BPC. This approach will not affect your existing development and no need to create z object as well as no need to add in to cube.
Shrikant

Leading 0's in BW have been removed in BPC but how to convert internal to external for hierarchy load.

When loading MD/Hierarchy into BPC from BW, I'm removing 0's appended to MD using js: parseInt(%external).
BW --> 000000123456
BPC -->123456
But when loading Hierarchy later I need to have a conversion which allow me tell system that BPC members are without 0's
BW-->000011111
BPC-->11111
I've tried the below different conversion mappings but didn't work.
External               Internal
      *                    js:parseInt(%external)
0000?????              ?????
0000*                       *
Some how I need to tell system that 000011111 has been changed to 11111 in BPC.
Can you guys please help me with the correct conversion??

Hi Asif,
js:parseInt(%external) is correct, make sure you are applying the conversion for all the IDs and NODEs.
Andy

"All" Hierarchy in BPC

Similar Messages

Maybe you are looking for