All I can get is a blank screen with the apple showing , what can I do?
What do you do when all you get on I phone is a black screen with just the white apple showing?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
i've tried to set up a new user on a mac book pro and i restarted it to create the new account but now all i can get is a white screen with the apple logo and the loading symbol what can i do ?
Look at this support article:
http://support.apple.com/kb/ts2570
Ciao. -
My iPad2 can't startup. it is stuck with the apple logo. what can i do?
I am not able to startup my ipad. the only thing i can see is the apple logo. it is not responding to anything. What can i do?
Turn it of by holding down the home and sleep/wake buttons ,use the red slider , and then turn back on again .
-
My iphone will not turn on.... it froze earlier today and now it will not turn on all i get is a black screen with the apple symbol every once in awhile... also it will not connect to my computer so i can reset it to factory settings
Sammyhunter lets get you back in action! Has there been any physical/water damage to the device? Try pressing and holding the home and power button together. Once the Apple symbol appears release both buttons. Keep us posted!
AshleyS_VZW
Follow us on Twitter @VZWSupport -
I can't log on to my I mac Desk top, every time I switch it on all I get is a white screen with the apple log , can anyone help pls?
Hello,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there. -
How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
Please help
MarceloIf there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
Gray, Blue or White screen at boot, w/spinner/progress bar
Also take this time to backup your users files off the machine if possible.
Most commonly used backup methods
Sometime that won't work and you need to do more
..Step by Step to fix your Mac -
After "restoring" my MacBook Pro via time capsule, all I get is a white screen with the apple in the middle and the little spin wheel spinning and spinning and spinning for 24 hrs now...
Hello kdcha55,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your Mac is stuck on the gray screen with a spinning gear, please follow the steps in the support article linked to below.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Take care,
Alex H. -
I tried to reset my iphone 5 from the phone and not a computer. I have had a blank screen with the apple logo and a full progress bar. I can not get my phone to restart. What can I do?
Sorry i meant iOs5 to ios 5.0.1
-
My ipod touch get restart by itself and just get stuck with the apple logo, What can i do?
my ipod touch get restart by itself, and just get stuck with the apple logo, What can i do?
Try connecting it to your iTunes library in recovery mode using the instructions in this Apple support document.
http://support.apple.com/kb/ht1808
Otherwise, try connecting in DFU mode.
http://www.iclarified.com/entry/index.php?enid=1034
B-rock -
I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?
I have Snow leopard on my computer, and I tried to do a hard restart as an article suggested, but it did not work. I also tried cleaning out the PRAM.
The only things I did last night:
-cleaned the history of Firefox out, including cookies
-let it unplugged all night
-plugged it back in the morning, it took a long time to figure itself out, but eventually the time was correct and I got on the internet for a bit
-shutdown the computer since I was going out and thought it would help the computer charge
-came back, tried to turn it on, and found that it would not go past the grey screen the apple on it and the spinning wheel even though I left it for 20 minutes or more
-tried turning it off and on to no availBefore doing a reinstall, which may not be needed at this point,
Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
Then Repair Permissions.
No need to report any Permissions errors........we all get them.
DALE -
MacBook Air won't start up even though it's fully powered. The white screen with the apple logo appears when I turn it on, then it shuts right back down. Can someone help me?
Hey Msazama30,
First, I would start off your troubleshooting by following the steps in this link:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Then, if that doesn't work, try out the information in here:
Step by Step to fix your Mac
https://discussions.apple.com/docs/DOC-3353
Welcome to Apple Support Communities!
All the best,
Delgadoh -
i received this phone from my brother because he wasnt using anymore, he wiped the memory and now all i get is a screen with the apple symbol on it. what do i need to do to get tis to work?
Try holding the home button and power button for 10s until the phone reboots and you see a usb and iTunes symbol. From there, connect it to your computer and do a restore.
-
I connected my i-pad 3 to my i-mac computer to sync music. Once connected it said I had an update to ios6 for my i-pad. I did as instructed. at the end it said it could not install because of error 1603. Now the i-pad will not shut now. It just has a black screen with the apple icon on it. Help
This is the ipod touch forum.
Try posting in the ipad forum -
I have my ipod nano 5th generation and when i plugged to my computer it is recognized but i cant do anything. On the ipod all i can see is a blackscreen with the apple sign! How can i fix this?
Howdy Lumagofe,
I was thinking that you may need to reset the iPod Nano, outlined here How to reset iPod http://support.apple.com/kb/ht1320.
Press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears. You may need to repeat this step.
If the above step did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.
If that doesn't quite get the iPod going again, then it will need to be restored. Use this article to help with that Restoring iPod to factory settings http://support.apple.com/kb/ht1339.
All the very best,
Sterling -
My phone is froze on a blank screen just the apple shows
please help my phone is somehow froze on the screen and just the apple shows whatdo i do
In that case....if you have Apple Care, give support a call - otherwise, walk it into the nearest Apple Store.
Good luck.
Maybe you are looking for
-
PRODUCTION ORDER STATUS AFTER CO11
HELLO ALL, I WANT OT KNOW THE STATUS OF PRODUCTION ORDER AFTER CONFIRMATION. If X prodcution order has been confirm on shop floor. and submited to QC. Next step is quallty inspection,then it will go to finished goods store, then despatch. How can i
-
How can I return files in Trash, more than 1 at a time? I can place many files into Trash at a time.
I placed many unix.exe files into Trash, more than one at a time. I recently updated 'QuickTime' and the Mac version of 'SilverLight" (name might be totally 'correct). I don't know if removing these files can impede my iMac 2008 running OS 10.6.8(upd
-
HP LaserJet CP1525nw makes terrible swealing noise when printing
Product: HP LaserJet CP1525nw OS: Windows 7 Error Msg: none The product makes a loud squealing noise when printing. It also leaves streak marks on envelopes. Product was purchased Dec. 21, 2010, so is only a little over one year old, but is out o
-
Simple string optimization question
ABAPpers, Here is the problem description: In a SELECT query loop, I need to build a string by concatenating all the column values for the current row. Each column is represented as a length-value pair. For example, let's say the current values are:
-
Import pics from iPhone5s to iPhoto
Hello, I've just got an iPhone 5S and having some trouble to import the photos to iPhoto. I used to connect my iPhone 4S via USB and opening iPhoto see the pictures automatically imported into the windows. Now, iPhoto see that my iPhone is connected