All i get is a white screen
all i get is a white screen then goes black
Try #2 and 3 in link below.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Similar Messages
-
Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be. I think it is caused by JAVA but am confused as when i view on snow leopard it works can you help
Open "Java Preferences" either from spotlight or your utilities folder...it's probably going to say you need to install a java runtime. Then just click install!
-
when i active my mac pro all i get is a white screen and it loading and when it fully load its turn off , and it keep on doing the same thing for hours
Hi Shahenaz,
It's a little difficult to understand exactly what's going on with your mac based on the description you gave. Is there anything else you could add? Is it stuck in a reboot loop? Or is it just showing a white screen forever?
I had pretty much the same problem a few days ago, and was worried my mac was screwed permanently, but I got it fixed up no problem!
Follow these steps to try and troubleshoot/fix the problem.
1. Boot into OSX Recovery Mode
First, turn off your Mac. If it isn't responding, or is stuck in a reboot loop, just hold down the power button until it turns off, and you hear the fans stop. Then boot it while holding the Command and R keys. If it successfully boots into OSX Recovery Mode, continue with this step. If not, skip to step two. (My Mac couldn't successfully boot into the recovery mode, so I had to go to step 2)
Select "Disk Utility" from the list of options, and find your built in hard drive from the list on the left. Usually there are two listings/names for your drive. The first should be something like "500GB longchainoflettersnumbers Media". Then the one below will be a little easier on the eyes, named Macintosh HD, if you haven't changed its name. That's the one you want, click it.
Now go to the "First Aid" tab. Click on the "Verify Disk" button in the bottom right corner, and let it do its thing. Once that's done, hit repair disk, also in the bottom right corner. If your disk is corrupted, you may need to run the repair process several times, before it comes up completely clean.
Once this is done, select Shut Down from the Apple menu and, once your Mac is completely off, turn it back on like normal. If it works, great. If not, proceed to step two.
2. SafeBoot
Sometimes, when a mac is acting up and doesn't want to start, all it takes is a safe boot, followed by a regular restart. Or maybe you recently installed a program that either has malicious or errored coding that's causing your troubles. This is where Safe Boot comes in.
Turn off your mac, and reboot it while holding Shift. (If you want to see the process that's going on in the background, boot while holding Shift, Command, and V. This will enter something called Verbose Mode).
If it boots successfully into Safe Mode, great. If you believe that there's a particular program that you recently downloaded that might be causing your trouble, now's the time to delete it. If not, just reboot normally and see if it works! If it doesn't, or if your Mac didn't even Safe Boot like mine, proceed to step 3.
3. Fsck!
For this step, you're going to be booting your mac into Single User Mode. I'm not going to go into details as to what this step does, but it works for some people. Here are the steps.
Turn off your mac, and reboot it while holding Command and S. The screen should go black, and you'll see some white text run across the screen, wait a few seconds, until you see the command prompt. Now type
fsck -fy
and hit the Enter key. This will run a series of system checks, which could take a few minutes. Be patient on this part. Once it's done, it will show one of two messages:
1. "The volume (your Mac) appears to be OK
or
2. "File System Was Modified"
If you got message 1, type reboot and press Return. Hopefully your computer works after this - if not, proceed to step 4.
If you got message 2, run the same command again until you get message 1. If it doesn't seem to be working, turn off your system and proceed to step 4.
If you couldn't even boot into Single User Mode in the first place (like me), go to step 4 anyways.
Step 4: Reset the NVRAM
The NVRAM is another kind of RAM that stores data like the computer volume you had set before you turned it off, or the screen brightness, resolution etc. This memory is saved, unlike with regular RAM. Resetting it isn't harmful to your system, it will just put your screen brightness, volume, etc. to defaults.
Turn off your Mac, and reboot while holding Command, Option, P, and R, and continue holding them down until you hear the computer restart again.
I can't really explain why to do this step, I just know it works for some people, and seems to be what unbricked my MacBook Pro. If none of these steps, fixed your Mac, well the situation is looking pretty grim. Try setting up a meeting with a Mac Genius at your local Apple store. However, I know that many other people with these symptoms ended up having a logic board failure. Apple can swap out your logic board for a new one, but the price is pretty hefty, somewhere around $300 I believe.
Well I wish you luck, I hope this helped you! -
When i press sleep wake button to turn on my iphone 3gs all i get is a white screen
trying to open the phone to make a call or answer the phone when i press the sleep wake button all i get is a white screen and cant do anything with the phone constantly turning phone on/off eventually my home page does return anyone know why and what to do.. thanks to all
MacBook Air Mid 2012?
"Apple has determined that certain 64GB and 128GB flash storage drives used in the previous generation of MacBook Air systems may fail. These systems were sold between June 2012 through June 2013."
http://www.apple.com/support/macbookair-flashdrive/ -
When i turn my touch all i get is a white screen help
when i turn on my touch all i get is a white screen help
Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad.
There's more to try but let's go a bit at a time. -
HT201412 when turned on all I get is a white screen
My Ipod when turned on all I get is a white screen. I tryed to do a reboot w/power and home button and nothing
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
All i get is a white screen. no more firefox
all i get is a white screen no firefox
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls -
After "restoring" my MacBook Pro via time capsule, all I get is a white screen with the apple in the middle and the little spin wheel spinning and spinning and spinning for 24 hrs now...
Hello kdcha55,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your Mac is stuck on the gray screen with a spinning gear, please follow the steps in the support article linked to below.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Take care,
Alex H. -
I messed up badly by trying to restore my brand new macbook pro by doing restart then command R and choose disc utility repair now when I start ,all I get is the white screen with a folder and a question mark,What can I do???help please
Can you still boot to the Recovery partition using Command and R whilst booting? Or did you wipe the Recovery partition as well?
If your Recovery partition is still intact, you can simply boot to it and reinstall the OS via the Internet. If you wiped the Recovery partition, you can hold down Command, option and R keys whilst booting and boot into true Internet Recovery mode. You'll be able to reformat the hard drive, erasing all partitions (format it as "Mac OS Extended (Journaled)" with a dingle GUID partition) and then reinstall the OS that shipped with your machine.
Note that you should use a physical Ethernet connection when restoring over the Internet - it's three times slower if you use wifi.
Try your Recovery partition first and if that doesn't work, use Internet Recovery.
Clinton -
****,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?
There have been numerous reports on the forum today regarding this issue. It seems to be an issue at Apple, but no information has been posted on the status site.
http://www.apple.com/support/systemstatus/ -
My 1st generation Ipod touch won't turn on at all and whenever I press the buttons to reset it all I get is a white screen, or a white screen with black lines across.Help pleaseeeeee!
You can work through the five 5 R's of troubleshooting to rule out the possibility of corrupted software.
http://www.apple.com/support/ipod/five_rs/
It might also be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
http://www.apple.com/support/ipod/service/prices/
Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity. A third party service will actually replace the damaged part for a little less. Google "iPod screen repair" and you should get a number of results to work with.
B-rock -
I can't log on to my I mac Desk top, every time I switch it on all I get is a white screen with the apple log , can anyone help pls?
Hello,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there. -
After refusing an update now all I get is a white screen with the firefox logo. If I have to reinstall firefox 3.66, how can I transfer my firefox profile with bookmarks etc, to the new installation?
== This happened ==
Every time Firefox opened-> press '''F11''' to bring the computer out of FullScreen
-> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
-> go to View Menu -> '''Zoom''' -> click '''Reset''' -> '''Page Style''' -> select '''Basic Page Style'''
-> go to View Menu -> Toolbars -> select '''Menu Bar''' and '''Navigation ToolBar''' -> unselect All Unwanted/Incompatible Toolbars
-> go to Tools Menu -> Options -> General -> '''When Firefox starts : select "Show My Home Page"''' -> Type the address of the website which you want to be your HomePage e.g. http://www.google.com
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Remember History"'''
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> Click OK on Options window
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious/Incompatible Extensions (Add-ons)
-> go to Tools Menu -> Add-ons -> Appearance section -> REMOVE All Unwanted/Suspicious/Incompatible Themes (Persona)
Now Restart Firefox. Check and tell if its working. -
this happened when i was updating it from ios 5.0.1 to 5.1 i had to stop it before it was done updating and now all i get is a frozen screen.
- Try a reset:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to computer and try to restore via iTunes.
- If screen remains on (white, has lines etc), let the battery fully drain. After charging for an hour try the reset and restore as necessary. -
I purchased a refurbished Macbook pro without operating system.
This is my first Mac, but have heard they are very simple and much more intuitive than Windows,
I've had the machine for three weeks now, and it's been nothing more than a paperweight!!
A friend said he had his old install disks, which happened to be exactly what google said I needed to start out as: version 10.5
When I boot holding the OPTION button down, I get two options. Windows (with an up arrow below it) and Mac OS x Install Disk 1 (with an up arrow below it).
I can move the mouse, and move the cursor with my arrow keys, to select either Windows or Mac OS install. The problem is - if I select the Mac OS install,
the disk starts up (I can hear it), but it never does anything. I can no longer move the mouse / cursor after selecting it. It will stay for hours like this with no progress.
On the disk itself, it says MAC OS version 10.5. This software is part of a hardware bundle purchase - not be sold separately.
It also says: to start up from Mac OS x, hold down the C key as the computer starts up. When I do that, all I get is a gray screen.
I've also tried the shift key when starting up (supposed to be safe mode?) but same thing - gray screen.
The only way to even eject the disk (scared the heck out of me) is to start up holding the OPTION button.
If I select WINDOWS after using the OPTION button, I get an IBM message:
IBM Secure Data Disposal Utility 2.0
IBM Remote Deployment Manager 4.1
Date and time of execution...7/24/12 18:01:22
Command executed................A:\SCRUB3.EXE /d=all /l=2
Return code...............................0
I assume this is what they used to wipe the hard drive before sending...
Obviously I am Apple-illiterate, but I've spent days going through chat rooms, etc. and came up with nothing.
At this point, I suspect either:
1) The machine is junk and needs to be returned OR
2) The disks are bad and/or can't be used for a clean install
I don't want to waste money buying a brand new OS, only to find out that the machine is bad.
Any thoughts??That model originally shipped with a special Intel version of Tiger. You should be able to install any retail version of Leopard or later. I would recommend you start with Snow Leopard. Snow Leopard requires a minimum of 1 GB of RAM. If you have 2 GBs of RAM then you could install Lion or Mountain Lion.
You can purchase Snow Leopard from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
When you receive the DVD:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. When completed quit DU and return to the installer. Complete the Snow Leopard installation.
Maybe you are looking for
-
How do i overcome "itunes library cannot be saved" message and problems?
Hi fellow itunes users This is the second time i've had this problem in the past few months. I was working on my itunes for hours getting playlists in order, ripping songs from CDs, etc and all was going well. I burned a whole load of CDs with the ne
-
Runtime Error when setting the textFlow of a TextArea with specific size
Hi All When trying to set the textFlow of a Textrea with a specific size (412x258) the flash player crashes because of a 15 sec loop. Could you please help me on this? Please find the code below: <?xml version="1.0" encoding="utf-8"?> <s:Application
-
I am trying to install Adobe Photoshop to a second computer
I am trying to install Adobe Photoshop Elements 8 to a second computer but it is telling me that it is already saved to a 2nd. This is incorrect, when i installed to the 1st computer i later had a technical failure and the computer needed to be shut
-
Hi Experts, I have a multi-threaded app that connects to a RAC DB using OCI. Flow: 1.) Get an expired resource 2.) Assigned it to a user Each thread executes the following sequence of queries: 1.) SELECT id, data FROM table_name WHERE date_expiry = :
-
Hpqgpc01.exe Application Error dialog on shutdown
When I shutdown, I get an error dialog saying that hpqgpc01.exe Application Error occurred at a particular address. When I dismiss the dialog, shutdown completes. What can I do to fix this? This question was solved. View Solution.