All i see is a white screen!

Hi,
i was listening to my 5th gen ipod when it blanked out into an empty lit up white screen..
i've tried connecting it to my computer, but itunes does not recognize it, and it doesnt show up on the left side list.
i've tried the setting on/off the hold button and pressing the center and menu/play button,
but nothing seems to work..
its..just....a white..screen....HELP! i am totally freaking out D:

My 5th gen does this, among other things. I fear your issues are just beginning.
Plug it into the wall charger (not usb) for a couple of hours. Then reset with the center and the menu buttons. If it resets, do a restore with the most current version of Itunes and ipod update.
If you're lucky, you're done.

Similar Messages

When I turn on my imac all I see is a white screen, the apple icon and a spinning pin-wheel that never stops spinning. My computer is stuck! Any Suggestions?

When I turn on my imac all I see is a white screen, the apple icon and a spinning pin-wheel that never stops spinning. My computer is stuck! Any Suggestions?

Follow all the steps at > Mac OS X: Gray screen appears during startup

HT3964 I just opened up my MacBook Pro after a few days of not using it and it was frozen. I turned it off and back on and all I see is a white screen, there was a file with a question mark flashing for a bit but I can't do anything, please help me!!

I just opened up my MacBook Pro after a few days of not using it and it was frozen. I turned it off and back on and all I see is a white screen, there was a file with a question mark flashing for a bit but I can't do anything, please help me!!

Jerricayoung,
you have a 13-inch Mid 2012 MacBook Pro. It’s modern enough that it supports booting into Recovery mode. To do so, hold down a Command key and the R key as you start up. It should eventually show a Mac OS X Utilities menu. Select Disk Utility from that menu; when the Disk Utility window appears, select the bootable volume from the left-hand side of the window. (It’s typically called “Macintosh HD”.) When the volume is selected, some buttons will appear on the right-hand side. If it’s not greyed out, press the Verify Disk button; if it is greyed out, or if it reports on errors that it found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu; that will restart your MacBook Pro in its normal mode. With luck, that will be enough to get you to your normal login screen, rather than the white screen.

I bought my 6 plus last night decided to upgrade the IOS 8 like they suggest and now all I see is a white screen with the apple sign in the middle with an occasional flashing red screen. Did my new phone seriously just crash? What do I do now?

I bought my 6 plus last night decided to upgrade the IOS 8 like they suggest and now all I see is a white screen with the apple sign in the middle with an occasional flashing red screen. Did my new phone seriously just crash? What do I do now? I left it overnight with the white screen, thinking maybe it'll go away and needs time to upgrade. Woke up this morning, nope still white screen. Very disappointed with Apple. I was so excited to get my phone and can't even use it right now.

First turn the iPhone off and back on and see if it works. If that doesn't work then do a Reset by holding the Sleep / Wake Button (The Power Button) and the Home Button at the same time until the white Apple Logo appears, the release both Buttons and wait until a Full Reset occurs. The iPhone 6 should come back to your Lock-Screen. If that doesn't work then you could connect the iPhone 6 via the Lightning Cable to a Computer with a Current Version of iTunes. Then open iTunes on the Computer and wait until your see a Button that represents your attached iPhone and click on it. This should bring up a Summary Screen on the Computer within iTunes. At that point your can choose Update Software if an Update is available or Restore the iPhone to Factory Settings / New In The Box, or you could try to Restore from your Backup if a current Backup had already been saved from a previous iPhone.
If you don't have a computer with iTunes and you can get the iPhone back on, then go to Settings>General>Software Update and see if the iPhone is still on iOS 8.0 or if it is now on iOS 8.0.2

My ipod just froze and now all i see is a white screen

i dont know what to do my ipod just froze and now all i see is a white screen.

Try:
iOS: Not responding or does not turn on
If not successful and you can't turn the iPod fully off, let the battery fully drain. After charging for at least an hour, try the above again.
- If still not successfully that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

My pro crashed. When I restart all I see is a white screen.

My pro crashed. When I restart all I see is a white screen. How can I get it restarted?

Try
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp2580.html

All I see is a white screen... (help please)

I got my ipod nano this october and it worked fine until a couple of weeks ago. I turned my ipod on and it shut down and when I turned it back on again all I got was a simple white screen, nothing else. It's been doing that for about three weeks now. I've tried EVERYTHING The 5 R's everthing, nothing seems to work. I even just let it sit and not be used for a week and it still hasn't worked. It's really angering me. My brother did not pay the money for an ipod for me that doesn't work. Somebody PLEASE, help me.

See this.
iPod 5th gen (with video) shows blank or white screen.
It's not for the nano but worth a try.
If none of the above help, then it may be an issue that requires service.
You can arrange online service here.
Service request.
Or if an Apple store is near you, take it there and have them check your iPod.

When i turn on my computer, all i see is a white screen.

well, after hours of searches I couldn't find any problem similar to mine. I am not really smart when it comes to computer software and all that but I will try my best to describe my computer and its problem. Ok, I have a Compaq windows
7 home premium OA. if you need more info on the computer just tell me and I will try my best to find it. so every time I turn on my laptop the screen is just white and I can hear the computer working normally (the fan is on, there's the boot up sound etc.)
so I was just wondering if any of you guys had any suggestion on what the problem is.

Little bit of google can give you an idea : https://www.google.com/#q=white+screen+login+windows+7
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Ipod won't turn on all i see is a white screen

I got a vid. ipod for christmas and it worked fine. One day it froze and when I reset it all I got was an illuminated white screen. I tried resenting it again, reinstalling my software, but I couldn't restore it using the updater because why computer and itunes and updater won't recognize my ipod

See these.
Your Windows PC doesn't recognize iPod.
iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Strange iPod behavior.
When restoring the iPod, put it into disk mode first.
Putting iPod into disk mode.
If none of the above help, it may need service.

Firefox says it is "done" loading but all i see is a white screen

any page i try to load it says it is "done" loading but the screen is blank. it isn't a specific page but any one that i try.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found

Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

Try to reset the PRAM first then go from there.
http://support.apple.com/kb/HT1379

My new mac mini (3 month) didn't start up,all that appeared was a white screen and a flashing folder with a question mark inside it.

My new Mac mini (3 month) didn't start up, all that appeared was a white screen and a flashing folder with a question mark inside it.
I followed by recommendations from 'Everything Mac': "shut it down by pressing and holding the power button for about 5 seconds.
Then hold down the Option key and press the power button again to start up the Mac mini. Keep holding down the Option key until
the Mac mini starts up."
But I got a Wi-Fi button only to chose and connect the local network. I connected to my network and I can't use this connection
becouse no icons.
Could you please help me?

Your Mini (running 10.6.4) should have come with grey-colored install disks. Now is the time to put them into service. Turn on your computer so that there is power to accept disk #1 into the optical drive. Once the disk is in the drive, shut off the computer by holding the start button down until it powers off. Then turn it on this time holding down the "C" key to make the computer boot from the disk. The question mark that you saw indicates that the computer cannot find a bootable volume. This can happen due to corrupted system files or an improper shutdown etc. Once you are in the "Installer" you can choose Disk Utility from the Utilities Menu in the menu bar. Use it to repair the disk and to see if that can solve your trouble.

When i active my mac pro all i get is a white screen and it loading .. and when it fully loaded it turns off and the same thing keep on happening again

when i active my mac pro all i get is a white screen and it loading and when it fully load its turn off , and it keep on doing the same thing for hours

Hi Shahenaz,
It's a little difficult to understand exactly what's going on with your mac based on the description you gave. Is there anything else you could add? Is it stuck in a reboot loop? Or is it just showing a white screen forever?
I had pretty much the same problem a few days ago, and was worried my mac was screwed permanently, but I got it fixed up no problem!
Follow these steps to try and troubleshoot/fix the problem.
1. Boot into OSX Recovery Mode
First, turn off your Mac. If it isn't responding, or is stuck in a reboot loop, just hold down the power button until it turns off, and you hear the fans stop. Then boot it while holding the Command and R keys. If it successfully boots into OSX Recovery Mode, continue with this step. If not, skip to step two. (My Mac couldn't successfully boot into the recovery mode, so I had to go to step 2)
Select "Disk Utility" from the list of options, and find your built in hard drive from the list on the left. Usually there are two listings/names for your drive. The first should be something like "500GB longchainoflettersnumbers Media". Then the one below will be a little easier on the eyes, named Macintosh HD, if you haven't changed its name. That's the one you want, click it.
Now go to the "First Aid" tab. Click on the "Verify Disk" button in the bottom right corner, and let it do its thing. Once that's done, hit repair disk, also in the bottom right corner. If your disk is corrupted, you may need to run the repair process several times, before it comes up completely clean.
Once this is done, select Shut Down from the Apple menu and, once your Mac is completely off, turn it back on like normal. If it works, great. If not, proceed to step two.
2. SafeBoot
Sometimes, when a mac is acting up and doesn't want to start, all it takes is a safe boot, followed by a regular restart. Or maybe you recently installed a program that either has malicious or errored coding that's causing your troubles. This is where Safe Boot comes in.
Turn off your mac, and reboot it while holding Shift. (If you want to see the process that's going on in the background, boot while holding Shift, Command, and V. This will enter something called Verbose Mode).
If it boots successfully into Safe Mode, great. If you believe that there's a particular program that you recently downloaded that might be causing your trouble, now's the time to delete it. If not, just reboot normally and see if it works! If it doesn't, or if your Mac didn't even Safe Boot like mine, proceed to step 3.
3. Fsck!
For this step, you're going to be booting your mac into Single User Mode. I'm not going to go into details as to what this step does, but it works for some people. Here are the steps.
Turn off your mac, and reboot it while holding Command and S. The screen should go black, and you'll see some white text run across the screen, wait a few seconds, until you see the command prompt. Now type
fsck -fy
and hit the Enter key. This will run a series of system checks, which could take a few minutes. Be patient on this part. Once it's done, it will show one of two messages:
1. "The volume (your Mac) appears to be OK
or
2. "File System Was Modified"
If you got message 1, type reboot and press Return. Hopefully your computer works after this - if not, proceed to step 4.
If you got message 2, run the same command again until you get message 1. If it doesn't seem to be working, turn off your system and proceed to step 4.
If you couldn't even boot into Single User Mode in the first place (like me), go to step 4 anyways.
Step 4: Reset the NVRAM
The NVRAM is another kind of RAM that stores data like the computer volume you had set before you turned it off, or the screen brightness, resolution etc. This memory is saved, unlike with regular RAM. Resetting it isn't harmful to your system, it will just put your screen brightness, volume, etc. to defaults.
Turn off your Mac, and reboot while holding Command, Option, P, and R, and continue holding them down until you hear the computer restart again.
I can't really explain why to do this step, I just know it works for some people, and seems to be what unbricked my MacBook Pro. If none of these steps, fixed your Mac, well the situation is looking pretty grim. Try setting up a meeting with a Mac Genius at your local Apple store. However, I know that many other people with these symptoms ended up having a logic board failure. Apple can swap out your logic board for a new one, but the price is pretty hefty, somewhere around $300 I believe.
Well I wish you luck, I hope this helped you!

When i turn my touch all i get is a white screen help

when i turn on my touch all i get is a white screen help

Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad.
There's more to try but let's go a bit at a time.

All i get is a white screen. no more firefox

all i get is a white screen no firefox

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

All i see is a white screen!

Similar Messages

Maybe you are looking for