All images in finder not working right

all of the images in my "all images" folder in the finder are being triplicated and it is making "face" versions of it where it is zoomed in on faces is the pictures, i dont want these "face" versions nor do i want 3 of the same picture, what is wrong and if nothing is wrong how do i make this stop?

These images are on your Mac, and therefore they turn up in the All Images search.
Remember, All Images is not a "place", it's a list. It's the answer to the following instruction: "List All the Images on my Mac".
The specific images you refer to are part of the internal workings of your iPhoto Library. A *very strong warning* : Accessing images in your iPhoto Library via the All Images search can very easily corrupt your iPhoto Library and cause you to lose Photographs.
Regards
TD

Similar Messages

TS3376 After I opened find my iphone app, it erased everything on my ipod and now it is not working right. How do I fix this?

After I turned the "find my iphone" app on to locate my daughters ipod from my iphone, it erased everything on her ipod. Now it is not working right. How can I fix this?

Welcome to the Apple Community.
Restore it from a back up.

Safari 5.1.2 Not working right after install

Hi, after installing the update for Snow Leopard safari is not working right. Some pages don't load, and other don't load correctly.
I have to keep hitting refresh two or three times. Also thunbnails are not displaying. Even the apple page comes up looking buggy.
Please help!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. First, disconnect all wired peripherals except keyboard, mouse, monitor, and Ethernet, if applicable. Boot in safe mode and log in as yourself. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you will see "Safe Boot" on the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all, perhaps including wireless networking on certain Macs. If you usually connect to the Internet via WiFi, and it doesn’t work in safe mode, connect using an Ethernet cable. If you can’t do that, reboot as usual (i.e., not in safe mode) and perform a safe login, as follows: Enter your credentials at the login screen, then hold down the shift key and click the “Log in” button. Keep holding the key until the menu bar appears. In this mode, your login items, among other things, won’t load.
In safe mode, test again. Same problem(s) now?
After testing, reboot (if you booted in safe mode) or log out/log in (if you performed a safe login) as usual.

My Safari is not working right. It often stalls and I get the "colored spinning wheel of Death". I send reports to Apple, but I never get any response or helpful info. What do I do to get Safari working correctly on my MacBook laptop?

My Safari is not working right. It often stalls and I get the "colored spinning wheel of Death". I send reports to Apple, but I never get any response or helpful info. What do I do to get Safari working correctly on my MacBook laptop?

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.
Uninstall the McAfee product by following the instructions on whichever of the pages linked below is applicable:
How to install or uninstall McAfee Internet Security for Mac
How to manually remove VirusScan for Mac 8.6.x using a removal script
How to uninstall and reinstall McAfee Agent 4.x on Macintosh computers
Note that if you have already tried to uninstall the software, you may have to reinstall it in order to finish the job. If you have a different version of the product, the procedure may be different.
Back up all data before making any changes.

Remote not working right

I've had my FIOS about 2 months, put new batteries in remote and it is still not working right. Some things work fine. Other things stopped working - can't delete a DVR show, can't change channels with one digit, but it will if I add all 4 digits, info box on bottom of screen never disappears (unless I hit exit). What's wrong?
My second TV set-up is OK.
Solved!
Go to Solution.

netmouse wrote:
I've had my FIOS about 2 months, put new batteries in remote and it is still not working right. Some things work fine. Other things stopped working - can't delete a DVR show, can't change channels with one digit, but it will if I add all 4 digits, info box on bottom of screen never disappears (unless I hit exit). What's wrong?
My second TV set-up is OK.
Might not even be a remote issue. Have you tried rebooting the box?
If you do think it's the remote it's still under warranty.
You can get a free replacement easy within the dvr's menu.
Here is a page that tells you ways to get a replacement.
http://www.verizon.com/support/residential/tv/fiostv/remote+controls/troubleshooting/questionsone/12...
Get a new remote and if you still have the same issues then you'll know its the dvr that needs to be replaced.

Is there any way to redownload iOS 5 my iPod touch 4 th generation white 32 gig is not working right?

My iPod is not working right. It's slow and lags and just doesn't work and always exits apps. I was if there was any way to redownload ios5 because it does the same things after I've reset about 4 times. Please help! It's even lagging why I am typing this. The thing that I checked below are all of the things that are not working on my iPod.

You cannot reinstall iOS without doing a restore. But you might first try a software update. If you have iOS 5.0 or 5.0.1, you can update to iOS 5.1 by going to Settings > General > Software Update.

IPad 2 was updated to latest iOS 7 and has been not working right since. I have tried to do a restore but still continues to go into reboot mode by itself and very erratic. Can no longer trust it. I tried to complain to Apple but have to give them 20 buck

iPad has not worked right since it updated to latest software. Tried to question Apple about it but it costs 20 bucks just to lodge a complaint. Is this normal Apple behavior or am I missing something. Also anyone else having issues with upgrade to iOS7. It was working great until that point and now goes into reboot mode often and sometimes will continuously reboot several times. I have tried to restore but that didn't clear the problem. Any thoughts or help would be appreciated.

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Since updating to 706 the sound on my ipad2 is not working right. On videos or music. There is constant distortion and what sounds like interference. Any ideas?

Since updating to 706 the sound on my ipad2 is not working right--on videos or music. There is distortion and some kind of interference at all times. Any ideas?

Has the unit EVER been jailbroke?
If "No," first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

Scroll-bar STILL not working right in 10.6.1 update

The scroll-bar is STILL NOT working right in the 10.6.1 update. I am not able to click anywhere on the scroll-bar and have the navigation go there. I have to drag the blamed thing where ever I want it to go. This problem only exist with the recent iTunes 10.6.x updates.

I have the new MacBook Pro 2010, Dell 3007WFP. No mirroring problemsat that or higher res. I was chagrined, however, to find out that while my 2007 15" MacBook Pro had no problems driving the Dell 30", the 2010 17" requires the Dual Link cable for $100 extra. ;>(
But it works fine.
ak

Command key not working right in several applications

All of a sudden, some functions are not working right, i.e., in PhotoShop when I select the Zoom key I get a minus rather than the usual plus. In Date and Time, I started getting a 24 hour clock. If I go there in System Prefs and change to 24 hour clock, then the readout on my menu bar is for 12 hour clock. Sometimes when I use Command-Q the machine asks me if I want to close all programs rather than just the one I'm attempting to leave. What is wrong?

Hi n,
I have no idea if this might work, but I'd reset the PRAM and SMC.

LR2 to PS CS3 roundtrip not working right

I am sorry, but from where I am standing Adobe screwed up big.
In the first place, LR 2 is very slow on my MACPRO with 4 gigs, as slow as Aperture 1.5 was and was what made me switch from Aperture to Lightroom.
In the second place, PS roundtrip is not working right. LR2 sends the image to PS when I select edit in, but after I finish with the file in PS and close and save, the new file does not show up in LR 2. It is in the folder but not in the catalog. I either have to re-import the image or sync the folder. On either case, it is not stacked with the original.
What's up??
Is there a setting or something? or just a big screw up from Adobe? Why isn't Adobe addressing this issues in public?

I am having the same problem with lr2. Mine will not round trip. It goes to CS3 but will not come back when saved in CS3. Strange thing is, after having LR2 since day one of release it did round trip a few times yesterday but today it is back to its habit of no round trip.
At times LR2 is slow and the brush tool is mostly unusable since it is so slow. Also sliders are very sticky.
If the Adobe boys and girls can get it working soon LR2 is great and I feel it has increased my quality.
Bob Kuprion

Sound Blaster X-FI Pci Express Front Panel Not working right Win7

ASound Blaster X-FI Pci Express Front Panel Not working right Win7
Please read carefully
Part number Part SB040
Hello,
I have a fresh install of Win7x64 OEM. First, I want to say that I have "AUTOMATICALLY MUTE SPEAKERS" UNCHECKED under the Headphone detection tab. I have tried "Automatically Enable Headphone Settings" checked or unchecked. No difference.
As soon as I plug in headphones to the front panel connector , the speakers in the mixer say "disconnected" (see below) and the SPDIF becomes the default output. There is no way for me to change this. And there isn't any sound coming from the headphones when plugged into the front panel. (the mic front panel works fine)
I am using the nati've Win7 drivers for the card. Apparently the Win 7 drivers on your site are older than the nati've ones.
This worked fine in Windows XP 32. Any ideas.

Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out.

My keyboard does not work right how can i fix it

I have the iphone4 I bought from Verizon about 2 months ago and now my key board will not work right how do I fix this? I have tried to reset factory settings and all of that but it did not work! If I can not fix it my self will Verizon send me a new one ?

That's a very important component of your phone, tiffanymoyle. Let's see what we can do to get your keyboard back up and running correctly. What issues are you encountering with the keyboard? Do certain letters not register when pressed? Does it make a difference if you turn your phone to function in landscape mode?
NicandroN_VZW
Follow us on twitter @VZWSupport

Help, my iPod's not working right.

Help. I unfortunately downloaded iOS 6.0 to my iPod touch and now it's not working right. I can't listen to anything in the itunes store and a song I tried to download doesn't work on my iPod, yet it works on my computer. Is there anyway to go back to the old OS system I had before this one? Is this happening to anyone else? What can I do?

You are very welcome!
It would seem that the problem was that you were not logged into your iTunes account on your device, and logging in fixed it.
That is great! You did well in your troubleshooting. I'm glad you got it fixed. Sometimes, just messing around with it, trying to figure it out helps.
As for updating, it would be good to do as I suggested, but I don't know what Apple's next update will hold for our devices. Whether it will fix only some, or all of the problems. So I would say that keeping an eye out, maybe on this forum, for results of the next update, whether or not it helped others, and how much it fixed. It may even take a few more updates for it to come back around to working as it should. Once your device doesn't seem to be full of errors and bugs, (and maybe the Apple forums are full of positive reviews) then you can stop updating. I'm not saying that updates are always bad, it is hard to tell. So if your comfortable with how your device is working, then you can choose to ignore future updates, it's your choice. I don't know when the updates are coming out either, so we are all riding it and seeing how it will turn out.
You can mark this discussion as solved if you want.
If in the future you have some questions, you can dig up your notification emails that were sent to notify you of these posts (if you keep them) and navigate back to this discussion and make a post. Because I am subscribed to this post too, so if you do make a post in this discussion, I will be notified.
I'm glad everything worked out, I am always happy to help.
Thank you for being precise and clear in your questions and results. (And the great grammar, it's so rare!)
Sincerely Lt. Leviathan

All images in finder not working right

Similar Messages

Maybe you are looking for