All in files and documents folder is gone?

Just upgraded from Lion to Mavericks and all in the documents, picture etc... folder is gone (it's total emty), just like a formatted harddrive :-(. No mails accounts available any more (besides the iCloud account, which I don't really use)
The backup in Time Machine is not accessable of some reason - I can see it but not restore.....
Any suggestions...PLEASE

You might try data recovery software. If your photos are jpeg files and not raw, programs like
Disk Drill: http://www.cleverfiles.com/  can retrieve the image files, but not restore your library.  How many photos can be recovered, will depend on how full your drive has been, and how much you have written to your drive, since you cleaned the drive.
However, Disk Drill is not free. It will be an expensive lesson to get your photos back. You can run the program for free in trial mode, to see, if it can find any files, but to save them, you will have to buy the app.
If you are considering to do that, stop immediately to use the mac, for anything that might write to the disk and erase more of the files.
BTW: you remembered to look into the Trash in your  Dock, did you?

Similar Messages

  • I installed and performed the Migration Assistant to transfer all my files and documents from my PC to iMac.  Nothing shows up in Finder on imac but Boot Camp Assistant window is on the screen. What is it, is it necessary, how do I proceed?

    I installed and ran Migration Assistant on my PC to tranfere files and documents to my iMac.  The process seemed to go as directed until the end when "Boot Camp Assistant" showed up on my iMac screen.  There was no mention of this in the Migration Assistant info. It seems I cannot proceed without it. What is it for, is it required, what is the process?

    I installed and ran Migration Assistant on my PC to tranfere files and documents to my iMac.  The process seemed to go as directed until the end when "Boot Camp Assistant" showed up on my iMac screen.  There was no mention of this in the Migration Assistant info. It seems I cannot proceed without it. What is it for, is it required, what is the process?

  • Arching of files is gone from the downloads and documents folder

    The arching list of files is gone when rolling over the downloads and documents folder. I removed the downloads folder by accident yesterday from the dock. Once I found it, I replaced it back on the dock and now the arching of files is gone on both folders. I have them as lists by date. I have restarted my MacBook Pro several times, clicked on the dock and properties and nothing seems to work. Does anyone know how to get it back? Are there any settings that I am missing?. Thanks!

    Right click on the folder in the Dock (or hold down the Control key and click on it if you have a one-button mouse), and choose "Stack" under the "Display as" section, and "Fan" under the "View content as" section in the resultant contextual menu. You can also choose how they are sorted from this menu as well.
    Message was edited by: Dan Parnell

  • With my taking any action, my folders and files no longer appear under documents (under Places). Now a folder titled Documents has appeared on my desktop with all my files and folders. What happened?What happened?

    With my taking any action, my folders and files no longer appear under documents (under Places). Now a folder titled Documents has appeared on my desktop with all my files and folders. What happened?What happened?

    The way I moved from 10.3.9 to 10.5.8 was to use "ditto -rsrc" and copy the user homes and the data share to an external firewire drive. Then did the same in reverse.
    I found the key to data and share permissions to make sure that the users had the same UID in Leopard that they had in Panther.
    You can then use "sudo rm -rf" to remove any folder from the relocated homes that you want. Remember if you do choose to remove "~/Library" from each users relocated home, you will be removing any iCal calendars, login.keychains, browser bookmarks, custom screensavers and wallpapers, etc.
    Users don't really care if they can login and do any work. But there will be much wailing, gnashing of the teeth, and anxiety, if they lose their bookmarks and wallpaper.

  • My documents on ipad 3 closes everytime I try to open it.it happened after I did an update last week.all my files and folders seem to be lost.how can I fix this?

    What can I do my documents keep closing when I tried to open it i have updated it last week and now it seems like it is not working.what cud the problem be?

    Can you start Firefox in [[Safe mode]] ?
    You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can initially skip the step to create a new profile, that may not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings?

    I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings? Please help. Thanks.

    You should have asked this before you tried: Changing username or short name- User Account and Short Name- OS X- How to change user account name or home directory name.

  • Hi ! i am using mac air i download from app store IDESKTOP when i open it its delete all my file and folder on my mac, hi ! i am using mac air i download from app store IDESKTOP when i open it its delete all my file and folder on my mac

    hi ! i am using mac air i download from app store IDESKTOP when i open it its delete all my file and folder on my mac, hi ! i am using mac air i download from app store IDESKTOP when i open it its delete all my file and folder on my mac

    Here you can contact the developer.
    (Notice, I'm posting this line only once. Not 4 times. )

  • Hello Guys. I had problems in the Computer before and changed my HD. I saved in my all files documents in (Time Capsule). How can I put all my files, pictures documents on my new HD? Please Help. Thank You

    Hello Guys.
    I had problems in the Computer before and changed my HD. I saved in my all files documents in (Time Capsule). How can I put all my files, pictures documents on my new HD?
    Please Help.
    Thank You
    Julio Skov

    Hey
    Thank you very much for replay.
    Would you explain to me how can I do?
    I don't really understand these processes.
    Thak you very much
    Julio

  • I downloaded the new mavericks all my pics and document are gone...can i get them back

    i downloaded the new mavericks all my pics and document are gone...can i get them back...my instagram wont sync....i did hook my phone up and got a few pictures back....help!
    thanks

    Are you saying Mavericks deleted the pictures and documents on your phone?

  • Read all the files in a folder over and over again

    I want to develop an application that reads all the files in a folder, and once its done reading those files it reads all the files again.
    The purpose for this application is to read all the files in a folder that are continuously being stored in that folder, so that when a new file is created, that file is also read by the application. I then need to compare the date and time in which the file was created to the actual date and time of the system, so that way I can get the most recent file, and then  I will do other operations with this file.
    The thing is that I know how to read all the files in a directory, but I don't know how to cycle through those files again, in order to look for the most recent one, and I don't know how to make the comparison of the time stamps, because I need a precision of one second in the system time and the time the file was created.
    Can someone please help me?
    Thanks in advance!
    Solved!
    Go to Solution.

    I think that I just went the wrong direction.
    What I wanted to do in the first place, was to rename and overwrite every new file in a directory with the same name and file extension, so that every new file overwrites the old file. The thing is that the list folder only lists the files the first time and then keeps on telling me there are no files to be read even though there are new files.
    What I need now is a way to overwrite the old files with the same name, and keep searching for every new file that is going to be stored in the directory.
    I will leave the code that I have right now, so that you can tell me what do I need to modify in order to read every new file that's going to be created in that directory.
    Thanks in advance for your help!
    Attachments:
    Overwrite Files.vi ‏12 KB

  • Since updating iTunes and Mavericks, every time I import m4v files into iTunes it renames all the files to "Avidemux". what's gone wrong?

    Since updating iTunes and Mavericks, every time I import m4v files into iTunes it re-names all the files to "Avidemux". what's gone wrong?

    (By the way, would I need to use also the red and white phono cables also to get sound?)
    Yes, S-video cables do not carry sound.
    When you import 16:9 into DV Widescreen, make sure that you have UNchecked 'automatic letterboxing'.
    In Preferences, is the project set to the correct standard?
    29.95 fps = NTSC
    25 fps = PAL.
    BTW, this is actually the iMovie 5 forum, but no matter!

  • Importing Mail file and documents from another account on same Mac

    Hi,
    I a new to Mac. Have a great new iMac. It's all working fine.
    Initially to simplify things I have set up everything under the main admin account (mine).
    In particular, I have installed both my and my wife's e-mail account documents in the Mail and Documents folders of the master account.
    Now that we're 'stable', I have set-up a separate account for her such that we keep our preferences, e-mails and documents separate.
    When setting-up her account I now can't find how to import 'her' folders from the Master account Mail application and Documents folder. Indeed, those folders appear grey and unaccessible from her account (I guess that's the basic idea abut separate account but I am nevertheless looking for ways to move those files.
    Any pointers?
    Tx,
    AH

    login to the main account and drag the folders to the "Drop Box" folder in her "Public" folder (in her home folder in "Users" at the top level), the go to her account to move the to the correct locations.

  • If I move documents from 'All My Files' to 'Documents' should they still appear in 'All My Files'? Why are they in both places, that seems like doubling the documents?

    If I move pages from 'All My Files' to 'Documents' should they still appear in both places?

    Welcome to Apple Support Communities
    Of course. "All my Files" look in all your folders for documents, pictures... and it shows all of them there even if you have them in Documents folder. Don't worry about it

  • I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents?

    I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents? I am planning to transition to a Mac so using the iCloud seems to make the most sence.

    No, it is not a backup method at all.  If you delete a sync'd file on any device, you delete it permanently from iCloud.  That by its very essence is not a backup solution therefore.  A backup solution does not automatically and simultaneiously delete the file everywhere when it is deleted from the original source.
    iCloud is strictly a syncronization tool for using files on multiple internet connected devices.

  • How can I transfer all my files and songs on my iPod to my computer?

    I recently got a new computer and all my old files and songs were lost with this new computer. I still have everything saved onto my iPod, but I'd like to take all these files and songs and save them into my computer, or atleast my iPod library. Is this possible? And even if I don't, if I add new files and songs, will all the old ones be replaced?
    Video iPod   Windows XP  

    Hi alicekat,
    You can find a ''HIDDEN'' document In the iPod that contains all the Song files that has been copied on Your iPod. To This HIDDEN FILE you will have to go ''DOCUMENT OPTIONS'' then you select the second bar and You choose''SHOW HIDDEN...''. Then You find Your iPod in the ''MY COMPUTER'' and open the New Document that appeared. You Choose ''CONTENT'' then ''MUSIC'' and You Simply Drag and drop every F'' into iTunes music Library.
    Your songs will be all on Your iTunes .
    Good Luck..
    Marc larouche

Maybe you are looking for

  • Flash with wmode="transparent" doesn't work with non-US keyboard (like FF)

    Safari has the same issue as FireFox (which they are finally fixing) : https://bugzilla.mozilla.org/show_bug.cgi?id=347185 If you use Flash with wmode="transparent" then it treats all keyboards as if they are US keyboards. For example try G.ho.st htt

  • Can't change Employee Group/Subgroup, thru PBAS0001.

    Hello all. I have integration between PA and OM. However, when i try to change the values from these fields, thru enhancement PBAS0001, i am unable to do so. These fields are only as output fields, probably because of the integration between OM and P

  • Activation of Elements 9

    On october 12, 2010 I purchased a copy of Elements 9 (order number: AD003445221) It was installed on two computer that were subsequently wiped and given to family members. I'm trying load the app on my new MacBook and getting message that I must deac

  • How can we configure the width of the table in SAP DB

    Hello sirs, How can we configure the width of the table in SAP DB? (<b>i.e to specify the total width of the sum of all columns</b>). I need to change the default value of table width for adding fields with biggger sizes... With best regards, Sudhees

  • JDeveloper 10g Developer Preview Bug

    Hi, Here is a misfunctionality that caused some hard times for me , so I decided to share it with you. Compiling files by means of right clicking on the projects pane successfully produces class files in the spesificied output directory of the projec