All in one 3512 alignment question

How can I re-use the alignment page and not print a new one every time I change a cartridge? I'm tired of wasting ink and paper with this nonsense. Is there a workaround?

Hello nogoodusernames, and welcome to the HP Forums.
I see you are looking into bypassing the alignment after changing your cartridge. Due to the design of the printer, there is no way to bypass this. When a new cartridge is put in, the alignment is automatic to ensure the cartridge prints properly, and everything is set up and calibrated to avoid any print quality issues.
Please let me know if you have any questions. Thanks for posting on the HP Forums.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

HP Officejet 6310 all-in-one wireless option questions

I have a HP Officejet 6300 All-in-One printer and I was using it with my wire network connection. I just moved to a new home, which I rent, and I do not want to make new wholes to past the cables then this is my question:
"I have a Cisco Linksys AE1000 high performance wireless-N usb adpater (dual band)" and I saw this product Female USB A to Male Ethernet RJ45 Plug Adapter (on Amazon that I think will be great if I can use it). Can I connect them to make my printer wireless?"
Please help.
Thanks.
BAK

Unfortunately that will not work for this printer. Wireless printing is set up through the printers software that you install on your computer. Since this printer is not a wireless printer, there will be no option to set it up wirelessly in the software, the only options will be ethernet or USB.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

One day my deskjet all in one 3512 wont give me an option to scan

clicking the icon, you get the option to scan, and you can scan several documents to one file,
but now as i click on the icon, it gives only printer options, if i right click on it, i get an option to scan
but only a single photo, and it wont save as a document, only a jpeg

Hello @garydavis61 , and welcome to the HP Forums, I hope you enjoy your experience!
I understand you're having issues scanning from the software. I would love to help!
I would recommend performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I'd then suggest downloading and running the scan portion of the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Setting up C340 20" non touch all in one pc/backup questions

Hello there I have just bought two C340's and I am nervious about setting them up, I have gone through the prompts and it says I am up and running now. But as it came with windows 8 preinstalled I don't know if I should be backing up Windows 8? I says stuff in the instructions about if you install you own OS to create a partition otherwise if you install it in c drive it will be wiped as part of the onetouch backup? But I am not sure if I have read this correctly. Should I be creating a recovery disk..of the OS or other parts? If so how? I also got a disk which says 'drivers' but it was never asked for in the basic setup prompts, and the pc says it is ready to use, so am I to suppose this is a spare copy? Lastly I have read alot on this forum about the re-sizing/repartitioning the c drive and the effect this has on the onekey back up. I don't know if this also applies to my C340 but it scares the hell out of me, I daren't touch anything now, and if the same applies to my pc than the other people having c:/d: drive/onekey backup issues should I be saving everything to the d drive as the c drive is nonexistant, fills up fast and stops the onekey dead? Thanks in advance.

hi confuseddotcom,
Welcome to the Lenovo Community.
Regarding your questions:
1. For a brand new PC, It's highly recommended to create a recovery disc so that in event of a system crash, you can always restore the computer to factory defaults. Check this guide on how to create a recovery disc on Windows 8. As an alternative, you can use Aomei Partition Assistant Home Edition or EaseUS Disk Copy Home Edition to clone the HDD.
2. The driver disc contains softwares and drivers for your Lenovo C340. I recommend you keep this disc just in case to save you the hassle of downloading the drivers on the lenovo website.
3. If you're PC came with a 500GB or 1TB HDD and has partitions, you can save your files on the partition that has more free space. If you resize the partitions by using disk management, the OKR functionality might get corrupted. Make sure to check this guide on how to create a recovery disc on Windows 8.before you resize the partition.
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HP PSC 1510XI ALL IN ONE. ALIGNMENT PAPER KEEPS PRINTING AFTER I SCAN IT FOR A NEW CARTRIDGE

ALIGNMENT PAPER KEEPS PRINTING WHEN I INSTALL A NEW CARTRIDGE..I SCAN THE PAPER AND EVERYTIME I TURN ON THE PRINTER, IT PRINTS AGAIN. I'M WASTING INK. HELP.

I have the same printer with the same problem since I hooked it up to my HP G62 Laptop and installed the HP Scan Center (which replaced the old program console (name escapes me at the moment)).
Every time I turn on the Laptop or switch users that irritating message to align the print cartridges comes up.
I've tried immediately scanning the alignment page once it was printed and the program STILL wants me to align the cartridges.
What really gets me is that on the very same page that tells me to align the cartridges it says that the printer automatically aligns the cartridges when it's turned on - so why should it need to do so again when switching users?
I never had this problem with the old console/software that the Scan Center replaced.
Frustrating!

C5180 All-in-one Printer Feeder Question

One of the four feeders on the paper tray came off, which makes the paper feed incorrectly. Is there a way to put the black clip back on the tray? Please help. I love my printer. Is this something that can be fixed or will I have to replace the printer?

Sure, uninstall the software and re-install from here.
There is also a patch for those who upgraded from Vista to 7, but it is not clear if this is just for those who left their HP software in place during the upgrade or if it would also apply to your situation.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

EA4500 Router and HP OJ8600 all in one printer interface questions.

Hello- I am running IE11,WIN8.1,1TB HD,12GB memory with Linksys's EA4500 Router connected to computer via Ethernet cable. The computer is a Lenovo desktop(K430). I ran a Troubleshoot HP installation test on the interface between the computer and EA4500. I opened my Linksys's Smart Wi-FI to perform the two following tasks.The Troubleshoot HP Installation suggested that I should set MAC Address Filtering to Disabled which I did with no problems. The Troubleshoot HP installation also suggested that I find my printer's MAC address and add it to my list of devices that are allowed to access my networh. How do I do this? Thanks.
Solved!
Go to Solution.

You should do a print configuration page from the printer and that should detail you all infomration regarding MAC and IP addressing. I recommend not using Mac Filtering as it's not needed. I recommend setting up a static IP address ON the printer, 192.168.1.86 which should be outside of the main routers default DCHP pool of .100 thru .199. You'll need to refer to the Mfr help and information on how to set up networking and the configuration of the printer. Review the User Manual as well.

I brought a new ipad (3rd generation), the problem i am having is with itunes. i downloaded a television series onto my ipad, i did not know that it would try to download it all at one time. my question is how do i change the way my ipad loads.

As I stated in the title, I purchased an ipad (3rd generation), and I am having trouble with itunes downloads. Mistakenly when I purchased a television series I selected download the entire series to my ipad. Is there a way to stop this download and change the download location to either my laptop or into the cloud?

Did you try tapping on the download to bring up a pause status? You can finish the download on the computer in iTunes. You may be able to delete the download by swiping across the progress bar of the download after you finish the download on the computer.
Launch iTunes on your computer and go to Store>Check for available downloads. Finish the download in iTunes and then try to delete the download from the iPad.

HP Deskjet all in one 3512

I am having troule wirelessly printing. It was working fine till yesterday. I have tried everything that HP has said to do Scan to PC is disabled also-yesterday is kept going back from diabled to enabled could this be why I cant print wirelessly from my laptop?

Have you tried using the HP Print and Scan Doctor. You can download it here
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02073861&cc=us&dlc=en&lc=en
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Printer start-up problem. HP Deskjet 2050 All-in-One J510 series. Part# CH350A

Whenever I first turn on printer it immediately prints a page and says I need to scan the page and realign it. Also, the colors are somewhat faded looking.
This question was solved.
View Solution.

Hey RedDave,
If the unit is printing an alignment page on each start up, then the unit is failing to align. If the unit fails to align, then it will attempt to do so on the next start up. Do you get an alignment failed message on the computer screen?
I would advise following the steps in the document linked below to troubleshoot this condition in your Deskjet 2050 J510 series All-in-One.
'Alignment Failed' Error Message Displays on the Computer
Let me know how it goes,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Cannot print to hp c7180 all-in-one using eprint from my ipad2

Just installed hp eprint on my iPad 2 and when I try to print eprint finds a number of printers but not the one on my home network which is a hp photos art c7180 all-in-one.
This question was solved.
View Solution.

Hey there. Unfortunately the C7189 does not support ePrint (if I am remembering correctly). Sorry about that!
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Psc 1610 all-in-one

Can I e-print to my HP PSC 1610 all-in-one?
This question was solved.
View Solution.

Hi JudithAMorrison,
Just to add some extra clarification for you, your PSC 1610 is not able to ePrint, as it was released before HP applied the ePrint technology to their printers. Generally any of the new printers are ePrint capable, so if you are wanting to acquire an HP ePrint enabled printer you can contact HP Tech Support at 1-800-474-6836 and see what sort of deals they have to get you an ePrint enabled printer.
If you need anything further please let me know. Have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

I am unable to stop auto delivery of apps. on HP Photosmart 5520 all in one printer

I am unable to stop auto delivery of apps. on HP Photosmart 5520 all in one printer
This question was solved.
View Solution.

To add on to what sabertooth04 stated, here is a link to a document that addresses print apps for your model of printer. Click on the drop down titled "Managing Scheduled Delivery Print Apps" and the option to cancel or remove an app will be available for you to click on and review the steps to remove that app . I hope that this helps.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

HP deskjet 2512 all-in-one/ "alignment failed"

I installed new HP ink cartridges (61XL) in my 2512 all-in-one printer. When I try to do the alignment (multiple times), I get the on-screen message, "alignment failed". Printer will print, but not correctly. Anyone have a solution?
This question was solved.
View Solution.

I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Driver question - my all in one printer will print but not scan

Hi
I have an HP c4280 (you know, the all in one printer you could get for free with the mail in rebate in 2007). I just plug it in and my mac recognizes it as a printer, and it prints fine, but image capture does not recognize it as a scanner. Before I upgraded to leopard I had all of HP's stupid software installed but after upgrading to leopard it didn't work (surprise). A lot of other things didn't work either so I did an erase and install and now everything works beautifully (I feel like I have old Tiger back, but better). However, I do not want to install HP's stupid overbloated and highly unnecessary mountain of software on my nice new clean system (I have turned into kind of an apple-only purist I guess ^_^). I checked HP's website and all they have is the same ginormous software bundle for download, and the installation wizard does not allow the option to install only components of the software (its all 28 programs or nothing). So, my question is, does anybody know where I can find only the driver I need (or WHAT driver I need) to make this printer compatible with image capture so I can scan?

You need to download the full featured driver from the HP site, and it also seems HP has an update for the Leopard installation as well.
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=219&lc=en&cc=us&dlc=en&produc t=3192753&lang=en
I too have a C4280 and wasn't able to use my scanner until I had fully installed the HP software.

All in one 3512 alignment question

Similar Messages

Maybe you are looking for