ALL IN ONE DESKJET F4280

MY PRINTER WILL NOT ACCEPT 225GRAM PHOTO PAPER ANY SOLUTIONS THANKS

Hi scubadan,
As per the Product Manual , found the following to be paper specs that the machine supports
10 x 15 cm (4 x 6 in.) Photo paper - 236 gsm (145 lb.)
I would want to know what exactly is happening when you say that the printer is not accepting the paper
- Do you get an error message.?
- Does the paper not get picked at all.?
- Are you using HP photo paper?
- What is the dimension of the paper that is getting rejected.
HP would most time test the printers on HP paper and a few more popular brands. So you may have to try using the HP Photo paper and check if the printer behaves the same way.
Regards
Hareesh@SEC
Click on the WHITE STAR icon to say 'Thanks..!!'
I am an HP employee. When I offer advice on HP Products, I'm speaking for myself and not for HP.

Similar Messages

HP 4515 ALL IN ONE DESKJET PRINTER NOT SCANNING

I HAVE
OS:WINDOWS 8.1 32-BIT
PRINTER:HP 4515 ALL IN ONE DESKJET PRINTER
OVER THE PAST FEW DAYS MY PRINTER HAS STOPPED SCANNING DOCUMENTS
THE MESSAGE "NOW SCANNING" KEEPS ON COMING
EARLIER IT WAS SCANNING DOCUMENTS BUT NOW IT HAS STOPPED DOING SO
ANY SOLUTIONS?
This question was solved.
View Solution.

hI @ARYANPRINJHA ,
I see by your post that you are unable to scan. I can help you with this.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
How is the printer connected? (USB/Ethernet/Wireless)
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Paper jam all-in-one deskjet BUFFO

I am a real newbie - have never done this before - can someone tell me how they fixed what seems to be a common problem?
I have a HP All-in-One deskjet F4440 - it will not print anything on the first and sometimes second paper. It just quietly pulls them through and puts them out blank. Then the next paper gets stuck halfway as it is being pulled through and stops. I have to pull it firmly and gently out towards me to release it. I have new cartridges in the the machine. It worked just fine for a few years and now this!! It also makes some "noise" that it never made before - like a clanking when the cartridge carriage moves bak and forth. Your help will certainly be appreciated. Thanks Ardna Fox

Hi there ardna,
This article covers paper jams and should resolve you issue. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Need installation cd for a HPF335 all-in-one deskjet printer.

NEED INSTALLATION CD FOR AN HP F335 ALL-IN-ONE DESKJET PRINTER. WHERE CAN I GET A COPY?

Hi,
Yes, the installer is downloadable - just select your OS on the link below, open up 'Drivers - Product Installation Software' and download the Full Feature installer.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=1153494&task=...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My eprint on my all in one deskjet printer 3050 j611a is not lighting up help

My eprint on my all in one deskjet printer 3050 j611a is not lighting up help

HI Michele100,
Welcome back to the HP Support Forums. I understand the ePrint light on the front panel of your Deskjet 3050A J611 printer is not lit up.
To better assist you, would you please supply some further information:
How is the printer connected (USB cable or wireless)?
What operating system are you using on your computer? whatsmyos.com
Are you getting any error messages? If yes, what do they say?
Is the printer plugged directly into a wall outlet?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

IHP F2210 all in one deskjet, need to print in black, but prints in color

My HP F2210 all in one deskjet, is having printing issues. When I set it to print in draft in black ink only, it then prints in color, I just don't understand WHY, can anyone offer assistance?
thank you
miricro

Hi there miricro,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP F2280 ALL IN ONE DESKJET

Hello i have one hp f2280.
I had to work with it a couple of months.i lost th drivers cd and i tried to download them from the hp site.
I found the right one for my printer but my pc doesnt recognize it as a printer but as an uknown usb device connected.
Do you have any idea of what i can do to make it work again?
Some times all the leds are blinking and the E letter appears on my printers screen

Hi Kerkyraios,
Welcome to the HP Forums!
I understand that your pc doesn't see your HP Deskjet F2280, and that sometimes all the lights blink. I am happy to help you with this issue!
Let's start by going through this blinking lights guide. Blinking Lights.
Also what is the Operating System on the PC? If you do not know the Operating System you are using, please visit this website. Whatsmyos.
Hope to hear from you, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

All-in-one Deskjet F340

All of a sudden my printing is very tiny. I have checked printing preferences in Control Panel and all looks OK. What else can I do?

Follow this document till the 4th step and tell me what happens.
Click Here
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

HP 6110xi All-In-One Deskjet Printer

I am unable to locate a new "latch cover door" that covers and holds the printer cartridge in place. The small 'tab' has broken off of the front of this "latch cover door" and am unable to close the door such that it stays closed. Can anyone help with this issue with a part number or help me locate a replacement part please?

hI @ARYANPRINJHA ,
I see by your post that you are unable to scan. I can help you with this.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
How is the printer connected? (USB/Ethernet/Wireless)
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP OfficeJet J4580 All-in-one printing issue

Dear Sir or Madam,
Two years ago I purchased this all-in-one deskjet and for the first year it operated perfectly, both over usb and connected to my Airport wireless router. For the last year, however, I have been unable to get it to print correctly. Although it does print, the page misses multiple lines of printing. What I mean is that, for example, the bottom or top half of an entire line of words will not print, and the problem reoccurs multiple times on the page. It does not appear to occur regularly, and seems to be caused by the the black cartridge only.
Because the printer is no longer under warranty I have attempted to troubleshoot the problem myself. I have replaced both print cartridges with new HP branded media. I have run the clear cartridges utility and have cleaned the cartridge carriage contacts/ cartridge contacts using a Q-Tip with distilled water. I have also removed the black cartridge for two hours and turned it upside down as recommended. The problem does not occur in the copy or fax function - but does occur with wireless and usb-connected printing. The test page prints correctly.

First solution is to do a partial reset.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00720603&cc=us&lc=en&dlc=en
If this doesn't bring the solution!
perform a re-install of the printer.
if this doesn't help - you could do a re-install with an alterantive driver , of the 990C.
( this driver is standard available in windows software!)
add printer and use/pick the driver of the 990C.
I work for HP but posts and replies are my own.

HP OfficeJet J4580 All-in-one

Dear Sir or Madam,
Two years ago I purchased this all-in-one deskjet and for the first year it operated perfectly, both over usb and connected to my Airport wireless router. For the last year, however, I have been unable to get it to print correctly. Although it does print, the page misses multiple lines of printing. What I mean is that, for example, the bottom or top half of an entire line of words will not print, and the problem reoccurs multiple times on the page. It does not appear to occur regularly, and seems to be caused by the the black cartridge only.
Because the printer is no longer under warranty I have attempted to troubleshoot the problem myself. I have replaced both print cartridges with new HP branded media. I have run the clear cartridges utility and have cleaned the cartridge carriage contacts/ cartridge contacts using a Q-Tip with distilled water. I have also removed the black cartridge for two hours and turned it upside down as recommended. The problem does not occur in the copy or fax function - but does occur with wireless and usb-connected printing. The test page prints correctly.

Hi Bsingh,
Hope this article helps you - Troubleshooting 'Phone Off Hook' Front Panel Messages
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Cheers!
* If this post has helped you, the White Kudos star on the left is a great way to say thanks!
* Please mark Accept As Solution if it solves your problem so other users can benefit as well.

FRUSTRATED - windows 7 64 bit driver HP 6500 709e all in one won't install on 2 computers

Hi,
My son and I both got new laptops for Christmas. I have had nothing but problems installing our wireless printer with its full features. My son's computer is a Dell, mine is a Toshiba. From what I could find both needed the same driver but both have had MAJOR issues getting the install to complete and installing the device. Somehow I was able to get it installed on my Toshiba but the "fix" I used didn't work on the Dell. PLEASE HELP! Thanks
Carol
Sorry I realized I did add much information. The printer is the 6500 all in one deskjet 709e. I have tried installing the 64 bit, windows 7...i also downloaded the update. Eventually it worked for my Toshiba laptop but still can't get it to install on my son's dell.
After numerous tries,
I downloaded the driver for windows 7, 64 bit driver and then downloaded the update. The driver/software wouldn't install the device until I did the update (for my Toshiba) but this is not working for the Dell. Also I did download the troubleshooter and it was useless!

Welcome to the HP Forums Zoney,
I read your post which indicates that you are getting a "MICROSOFT VISUAL C ++RUNTIME LIBRARY" error, when trying to install the printer software. I can help you with this.
Download and install this Patch> Microsoft Visual C++ Runtime Error.
Uninstall the printer software.
Before installing the printer software again, setup the Admin rights on the computer.
Run Command Prompt as Administrator. Go to the start menu, type “CMD” in the search bar. Now, you should see a shortcut for CMD above. Right click on it, and click “run as administrator”. If it asks you for administrative permission, please allow permission. In your Command Prompt window (as administrator), type the following and hit Enter: net user administrator /active:yes
You should see a message saying "the command completed successfully". After troubleshooting is done, you can disable this account by typing the following command into Command Prompt (as administrator): net user administrator /active:no.
Restart the computer, and utilize the new account that is available, which should be named "Administrator".
Here are some more steps you can try if you are still getting the Runtime error.
But it is looking more like a Operating System issue.
Download and install the Microsoft Visual C++ 2010, 2008 and 2005 Redistributable Packages.
You will find the download links to these packages below:
2005 - http://www.microsoft.com/en-ca/download/details.aspx?id=26347
2008 - http://www.microsoft.com/en-ca/download/details.aspx?id=5582
2010 - http://www.microsoft.com/en-us/download/details.aspx?id=14632
Try the installation again please.
Let me know how you make out.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP 8500 All in One prints reddish color

My HP 8500 All in One Deskjet has started to print in all reddish color even though the cartridges appear full. I have run a cardridge head clean and a cardridge align and if I'd rather put my head through a plate glass window than have to talk to HP today.
Does anyone happen to have any recommendations on this and was there a dedicated place to post Mac Printer questions with the new interface?
Also, does anyone know how I get to set the Print Page to all black and white? I can never seem to find these kinds of things in the Printer Config now that I have converted to Mac for some reason.
Thanks.

hi,
It seems to me that there could be a problem with the Magenta/Cyan Printhead of your printer. Try to perform the steps of cleaning the contacts of the printhead and of the printer, click here. After cleaning the contacts, try to print a diagnostic page to see if your printer will now print color. If issue persisted, then i believe you need to replace the Magenta/Cyan printhead.
Contact HP tech support at 1-800-474-6836 for any suggestions regarding this matter, they might be able to replace the printhead of your printer if your machine is still under warranty.
Hope these would help you!
Kiko

Maverick OS X10.9.4 won't save scan from HP All in One

Have new iMac running OSX10.9.4 and am trying to scan from my old HP All in One Deskjet 3070A. I have managed to launch the scan function from System preferences, but it does not appear to be saving the scan anywhere. I have asked it to do the scan to the desktop and it is not there.
When I try and scan using the Old scan icon from along the bottom of my screen it comes up with an error message. Boo HIss HP, it is very complicated to have to go through system preferences. Please update the software!

Hi @pearl46
I can help you scan using your Deskjet 3070a despite there being no full feature software and drivers for 10.9.
I have seen the scan not save before in System Preferences, I believe I may have a quick solution for you. When you open the Scanner it does an overview, you might need to change the scan size. It seems that for some reason the Apple scan software is defaulting to custom and 0 x 0, thus it is not actually scanning and saving anything because the scan size is 0. I know it is strange ,but if you unselect custom, then change the scan size to the desired size, and click scan it should then save to the location you selected!
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Tearing my hair out trying to install a HP all in one printer

Hi there I have a HP all in one Deskjet f2280 and I keep getting an error
"an error occurred while trying to add the selected printer, error -50"
I can't add a printer and I've installed and reinstalled the software???
I contacted Hewlett Packard and they've said it was an apple problem, does anyone know what I can do?
thanks

Welcome To  Discussions Jellybean100!
If you installed the driver/software, from a CD, uninstall it, then download & install from here HP Deskjet F2280 All-in-One Printer, instead.
There are tips & FAQ at that site as well.
ali b

ALL IN ONE DESKJET F4280

Similar Messages

Maybe you are looking for