All in one devices wireless print & scan?

Hi,
Can I print and Scan wirelessly, without connecting the all in one device to the USB port on the air port express? I speak about the Canon PIXMA MP600R which has a 802.11g wireless interface. Theoritically yes but how is it in real life?
I will appreciate an answer soon becasue I need to buy such a device but I will not spend this money and it won`t work at the end with appologies from the Apple Store !
PS. I will connect the system with my iBook G3/600 which has no USB 2.0 that`s why I need to buy the MP600R and not the normal MP600, I had no answer from the Apple Shop here if a USB 2.0 device can work normally with a 1.1 equipped Mac, I will also appreciate an answer for that.
Thanks a lot,

Can I print and Scan wirelessly, without connecting the all in one device to the USB port on the air port express?
No. The USB port only supports printing to a single compatible printer. You can also read iFelix's user tip "Can I Scan?"

Similar Messages

Is it possible to connect HP DESKJET 1510 All-in-One series Wireless printer without USB cable?

my mom recently bought me the HP DESKJET 1510 All-in-One series so i have an at home printer for school work. but when we bought it we did not know there was a certain USB that had to connect to the printer. so we bought the wrong one. now i have a project due and i cannot print. we have a small USB that fits it but its hard to connect it to the computer and printer because its so small. so if we can have it sent to the printer without the USB that would be perfect!

Hi,
No, in many cases printers won't come with USB cables. You need a cable which is similar to the following one:
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Office Jet All in One 6700 wireless printing sometimes it works and sometimes it doesn't?

I have a new HP 6700 all in one. I have a desktop Win 7 pc and a laptop Win 7. Sometimes i can print from my laptop to the 6700 and other times not. One time it'll print a word doc, next time not; same thing for excel. Can't get it to print any pdfs and web pages. I am at a loss?
This question was solved.
View Solution.

Hey, I'm glad I could help!

HP8500A all-in-one can no longer scan thru wireless network but prints fine.

HP8500A all-in-one can no longer scan thru wireless network but prints fine. Have used this device several times over past 2 years on different wireless networks (at home) but usually at some point I lose wireless scan function but maintain wireless Printing. I used to be able to reload the software and resolve the issue but now in this "new network" cannot get wireless scanning to work. Setup software; original software (CD) and current download as well as "Print/Scan Dr" hangs-up at "network check" for hours. Compaq laptop, Dell Laptop, Cell phones and Roku work fine thru network. Scanner works fine with USB to Laptops.

Which model Epsons are they?
I'm assuming you're using Yosemite (OS X 10.10), and that the problem developed when you upgraded from a previous OS.
(Your profile says 10.6.7 BTW).
Maybe the scanning function is not compatible with Yosemite.
You could try a few things:
reset your wifi system:
power down everything: modem, router, computer, printer/scanners.
wait a minute.
power them all up again, in that order: modem, router, computer, printers. Let each power up completely before going on to the next.
try a factor reset on your printer/scanner (if there is such a function). You'll have to check your manual for how. If you do that you'll have to enter the wifi password in your printer/scanner, assuming you have security on your network.
uninstall any printer manufacturer "utilities" that are on your Mac, and try Image Capture again.
If it is a compatible software issue, you could try VueScan, but I've never needed to use it.

I got my first Mac 2 weeks ago, a Macbook Pro. I can't get it to scan on my HP Laserjet1217 nfwMFP all in one. It prints (wirelessly) just fine. But when I try to scan, it says something like "no scanners available". Wireless or connected, it's the same.

I have not been able to get my new Macbook Pro to scan, either wirelessly or connected, with my HP Laserjet all in one M1217 nfwMFP printer. It prints wirelessly just fine, but if I try to scan, I get the message that no scanners are found. The guy in the Apple store had it scanning just fine with a new HP printer he took out of the box. Any ideas would be appreciated.
Allan 113

I would check with HP. Your scanner may need a firmware update and updated HP software. Start here:
http://www8.hp.com/us/en/hp-search/search-results.html?qt=LaserJet+m1217nfw+MFP& cc=us&lang=en&charset=utf-8&qp=&hpn=&hpa=&hps=&hpr=&cat=&current_url=CSSres
then here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=4075472

My printer, hp photosmart c4200 all-in-one is stuck in scan mode

My HP printer--HP Photosmart C4200 All-in-One is stuck in scan mode. I have tried holding start button 60 sec, unplug from power supply, hold while I plug back in with no luck.

Hi @Bungybill,
Welcome to the HP Forums!
I understand that you cannot copy or scan with your HP Photosmart 3110 on Mac. I am happy to help!
For further assistance, I will need to know:
The version number of the Mac Operating System. To find the exact version, visit this link. Whatsmyos.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
If you make a copy, and lift the lid, do you see a light come on and the scanner bar move?
Hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Officejet Pro 8620 All in One Will No Longer Scan in Color

Hello,
I have an Officejet Pro 8620 all in one. I was scanning a few items last night and the first few items came out in color fine. Then all of the sudden as I continued to scan the next few images would only scan in black and white. I cannot seem to get the scanner to scan in color again. How can I fix this? I did not change any settings or anything while I was scanning so I do not know why the sudden change to black and white? I am on a Mac computer with all newest operating system etc.
Thanks in advance

Hi there
I have some more suggestions for you to try. Please try them in order I have written them in.
Reset the printing system
Repair disk permissions
Restart the Mac
Install the Full Feature Driver here: HP Officejet Pro 8620 e-All-in-One Printer series Full Feature Software and Drivers
In addition, download this Apple driver: HP Printer Drivers v3.0 for OS X
That should do the trick!
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

My C7280 all in one will no longer scan

My C7280 all in one will no longer scan to my computer. I get an error message that says "no scan options, refer to device documentation to troubleshoot". I have tried all I know. I have re-downloaded the origianl disc software numerous times to no avail. I have gone on line to download the software to no avail. I just get a message that states there was an error in the download.

Hi,
Please follow the steps in the following document.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02450835&cc=ad&dlc=en&lc=en
Thanks,
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

My HP psc 1210 all-in-one, suddenly stopped printing any text. it will print the graphics.

I believe I have tried everything. The HP psc 1210 series all-in-one refusses to print text. nor will it scan or copy. I have done all the troubeshooting that I can find. Still will not print from PC or copy. I think it will scan to the computer. Icon with gray circle around it, states it is offline, yet from the control panel, printer and faxes, shows it as being online and ready. What else can I do to remedy this problem? Thank you in advance.

There may be 2 separate issues here.
-For the offline portion, check this document out:
Printer is offline
-For just printing graphics, this would make me think that the Black cartridge is empty/low on ink/malfunctioning. Try printing a black and white picture. That would let you know if it is the cartridge or not.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

C3180 Photosmart All-in-one won't print. Gives message 'clear paper jam.' There is no paper jam.

C3180 Photosmart All-in-one won't print. Gives message 'clear paper jam.' There is no paper jam. About a month ago there was a paper jam, but was removed. It worked fine since then until yesterday. I've tried all the HP trouble-shooting suggestions- unplug, take apart, manually move carriage, etc. and nothing has solved the problem. The paper does not advance...all that happens if I try to print is a lot of noise like carriage going back and forth and after a/b 1-2 minutes it will show the "red X" blinking on the printer and a message on the computer screen, "Clear paper jam." When the problem first started yesterday the message was that the printer was "Out of paper." I need to print a resume and this is just the wrong time for someone such as myself with little computer knowledge to try to figure it out. Thanks for any suggestions!

Hi there pattimessick,
You may not need to remove/re-add. Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own (especially connectivity problems) and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Macbook Air: connecting Canon Office All-In-One PIXMA MX330 printer

I purchased my Macbook Air a few months ago, and I selected theCanon Office All-In-One PIXMA MX330 printer to go along with it. I have tried to install the printer a few times in various ways. Initially, I used my Macbook Air superdrive to attempt to load my new printer with the included disk. However, installation requires that the printer be connected to the Macbook via USB. Since the superdrive was occupying my only USB, I tried to connect my printer wirelessly with another computer. The laptop I used was not a Mac, and I simply could not get his computer to recognize the disk for my Macbook. So I tried something else; I borrowed my school libraries USB splitter in a last attempt to connect them both to my Macbook Air at the same time. However the superdrive does not react when not directly connected to the computer...
In short, I cannot find a way to connect my Canon Office All-In-One PIXMA MX330 printer to my Macbook Air.
Help?

Connect the SuperDrive to the computer, use the Disk Utility in the /Applications/Utilities/ folder to create an image of the installation disk, disconnect the SuperDrive, plug in the printer, and install the software from the image.
(44558)

Work around for scanner on epson wp 4530 all in one device after Maverick update

Epson technical staff helped me find the solution to find the scnning function from my 4530 all in one device. Using "image cpature" command in "spotlight", find scanner in "shared" apps, then use the scanner function from there.
Before Maverick update, the scanner button light up in the 4530 device and I can scan from the window with the device. Now I have to work around to get the job done. Apple or Epson need to develop a new driver to recover this funtion.
KL

There's no need to use Spotlight for Image Capture.
Launch Image Capture located in your Applications folder.
Connect the scanner to your Mac whether Wi-Fi or USB.
Click the very small black box bottom left side of the Image Capture window.
You'll see this pop up menu: Connecting this (device) opens:
You can select a default app to scan (Image Capture) and select a folder from the Import To pop up menu on the right to save scanned files to.
If you need help with the Image Capture software, click Help from the Image Capture menu bar.
Mac Basics: Using a scanner

How do I direct my HP Photosmart e-ALL-IN-ONE D110 series printer to my Android Tablet?

How do I add my HP Photosmart e-ALL-IN-ONE D110 series printer to my Android Tablet?

Hi,
Given your ptinter supports print from Android, you need an app called HP ePrint. Please use Google Store to install it:
https://play.google.com/store/apps/details?id=com.hp.android.print
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

The HP Deskjet 3050A All-In-One J611 series printer I just bought is not compatible with my Mac Book Pro. What do I need to do?

I recently purchased an HP Deskjet 3050A All-In-One J611 series printer and it is not compatible with the version of the operating system on my mac book pro. I am currently running on OS X 10.4.11 and the printer is compatible with v10.5 or higher. What can I do to update the operating system on my Mac Book Pro?

10.5 will be harder to find & more expensive, I think I'd go for 10.6
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Apple no longer has it for sale.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.

My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time. This is especially disconcerting at Christmas time when you're trying to get Christmas letters in the mail! Any help?

The cyan portion of the printhead may be clogged. I would suggest running the diagnostics shown here. If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

All in one devices wireless print & scan?

Similar Messages

Maybe you are looking for