All in one dropping power

I have a TOSHIBA LX835 PQQ18U-00G008 and it's been running fine for about a year and a half. Lately it started randomly dropping power 2 or 3 times a day. I replaced the external power supply but it is still doing it. What else might be causing this? Thanks.

Looks like this is a heat problem. I got a temperature monitoring program and I can see the temps are too high. The thing I don't get is the program is also supposed to disply fan speed and fan controller info and there is nothing there, just blank. I tried three such monitors and they all say the same thing, yes the cpu is hot and there is no fan info at all. Could this mean the fan or fan controller is dead? Has anyone seen this before?

Similar Messages

HP Officejet 4500 G510n-z all-in-one series, Power button

HP Officejet 4500 G510n-z all-in-one series wireless.
When I press and release the power button, it does not start and no lights appear.
If I press and hold the power button down for about one minute, the printer lights up and functions just fine.
To shut the printer down I need to hold the power button down for about a minute.
This question was solved.
View Solution.

Hi @Tonyey20,
Welcome to the HP Support Forums! I see the power button on your HP Officejet 4500 is non responsive, if you press and hold the button for a minute the printer will light up and function as normal.
I would like you to start troubleshooting here: The HP Printer Won't Turn On or Respond When the Power Button is Pressed
Please let me know the outcome. I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Photosmart C4180 All-in-One. While printing it stopped and the power button is orange. Nothing works

Hi, I have a Photosmart C4180 All-in-One. So far it worked perfectly.
Tonight I had to print a few pages and right in the middle of it, it stopped leaving the page halfway.
Also the on/off button stays orange and there is an exclamation point underneath it.
I removed the page and turned off the power by removing the plug (pressing the on/off button didn't work).
While putting the plug back in, the power came on again... but the on/off button remains orange. Nothing works.
Does anybody recognize this problem and/or does anybody have a solution for this?
Thank you,
Dutchfox

Hi , I understand that you are having issues printing and scanning. I would be happy to help you.
Try and print a hardware self test on the printer to find out if it is a hardware or software issue.HP Photosmart (D110), Photosmart Wireless (B110), and Photosmart Ink Advantage (K510) e-All-in-One Printer Series - Printing a Network Configuration Page. Check to see if you still have a valid IPv4 address. If you have a valid IPv4 address for the printer then try and access the Embedded Web Server for the printer.
Type the IPv4 address into your web browser's address bar. (Safari)Did it load the web page? If you were able to access the printer's Embedded Web Server, please try the following steps: Repair the Disk Permissions on the Mac:Close all applications.On the Apple menu bar, click Go, click Applications and then click Utilities.Double-click Disk Utility.Highlight your hard drive/partition on the left.Click Verify and then Repair Disk Permissions. Restart the computer.. Reset the Printing System: Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol. Click the Apple icon and then click System Preferences.Click Printers & Scanners.Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.Click OK to confirm the reset.Type the correct Name and Password.Click OK to reset the printing system.Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button. If you appreciate my efforts, please click the 'Thumbs up' button below. If there is anything else I can help you with, just let me know. Thank You.

Why does closing all open windows (15) and leaving only one drop ram usage from 1.5 to 1.4Gb and not more.

Why does closing all open windows (15) and leaving only one drop ram usage by only 100mb from 1.5 to 1.4Gb.
What is in this 1.4 gb ?
I don't care much about ram, It's just that cpu usage spike like crazy by the end.
''Edited to remove swearing - TonyE''

Hi musicfan,<br />Sorry you are having problems with Firefox. Maybe you should have asked earlier and we could have fixed it.
Reading your comments I do not see that rolling back to an insecure Firefox 22 will actually help you much. You are probably best using IE, unless you have also damaged that.
*[[Export bookmarks to Internet Explorer]]
You should not use old versions they are insecure. Security fixes are publicised and exploitable.
* [[Install an older version of Firefox]]
* https://www.mozilla.org/security/known-vulnerabilities/firefox.html
Most others will not be having such problems. We are now able to say that with confidence because after developers missed a regression in Firefox 4 telemetry was introduced so that data was obtained. It may be an idea to turn on your telemetry, if you have not already done so, and decide to stick with Firefox.
*[[Send performance data to Mozilla to help improve Firefox]]
Trying safe mode takes seconds. Unfortunatly if you are not willing to do even rudimentary troubleshooting there is not anything we can do to help you.
*[[Troubleshoot Firefox issues using Safe Mode]]

Power problem with my 4620 all in one printer / scanner / fax

Hi,
My problem is this. I have a 4620 all-in-one printer / scanner / fax. However, I have discovered this problem.
Scenario:
The printer hasn't been used for a day or two but is plugged in still with the light above the power cord on. I want to print a word doc or whatever. I click print. I obtain a message that the computer (via wifi) can't communicate with the printer. Pressing the Power on button on the printer interface doesn't work.
My solution, I have to disconnect the power supply from the printer, then reconnect and then press the Power On button.
This isn't normal I think. I don't think for one minute that I should have to go and disconnect and reconnect the power suppy for it to print etc.
Any ideas?
Thank you in advance!!

maybe here: http://discussions.apple.com/thread.jspa?messageID=11110856&#11110856 ?
found doing a quick search of the forum
all results here: http://discussions.apple.com/search.jspa?objID=c263&search=Go&q=laser+printer
JGG

I can't drag and drop or add to library for dvd's that I converted with Bootstrap VideoWizard All-in-one app. hep!

i purchased Bootstrap VideoWizard all-in-one edition and converted my homemade Dvds, but I can't drag and drop the converted files into iTunes or use iTunes file - add to library to add them to iTunes so I can sync them onto my iPad 1. What am I doing wrong? The bootstrap website wasn't any help.

Yes, that appears how Mavericks works right now. However, you can open the Address Panel, select all your contacts, then click the To (or CC, or Bcc) buttons to move the selection to the address field.
If it is not already in the Toolbar, right-click on the Toolbar and select Customize Toolbar…
Then, drag the address panel up to wherever you want it.
You may also want to add it to the New Message window in the same way.

HP PSC2500 All-In-One noise after Power Failure

Product: HP PSC2510 All In One
OS: Windows XP Home
No Error Messages
No Changes made to OS or Printer
The issue:
After a Power Failure, upon starting the printer up, the scanner bar attempts to locate the Home Position but once it gets to the area it is supposed to set at, it continues to move to the right and makes a repeating (gear) noise.
The only fixes I have come across are:
1) Opening the scanner bed (glass top) and cleaning the glass where the white strip runs along the glass.
This stops the noise and allows the scanner to reset corretly for 1 to 3 months.
2) Holding the Cancel button or OK + Cancel.
This allowed the printer to reset correctly 1 time.
Now, the Hard Reset and Semi Reset will not work.
Again, this issue ONLY happens after a power failure or if the plug is pulled...
The issue does not happen if the power is shut off correctly.
I am sure that Opening the top and cleaning the glass will work but this is a serious headache for a printer that cost over $225.
I am a Computer Repair Technician but Printer issues of this nature are not in my area of expertise
Is there anyone who can tell me the possible cause and/or Permanent fix for this issue?
I cannot find any other information about this issue online, and I cannot find a Service Manual.
Please help because this is my work printer.
Please email me at:
{Personal Information Removed}

UPDATE: As it stands, I opened the scanner bed and cleaned the glass Home Position strip (for the 6th time now) and low-and-behold, the printer functions properly again.
I know this issue will happen again in a few weeks to a month or so...
My question still stands...
Can ANYONE come up with a permanent solution to repair this issue?
Thanks again in advance.

How do I stop my PSC1510 All-In -One from printing a test page every time I power it on?Thanks

How do I stop my PSC1510 All-In -One from printing a test page every time I power it on?Thanks

This occurs when the printer is not aligned completely.
Please follow the steps mention in the link below to resolve the issue:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01336348&cc=us&lc=en&dlc=en&product=428800&tmp_...
Please mark the post that solves your problem as "Accepted Solution"
Although I am an HP Employee, ALL of my posts express MY opinion, and not of HP, whatsoever.

Power Reset error message All-in-one 6310xi

I have an Officejet All-in-one 6310xi. I have had it for several years, and it has worked well. Recently, for no apparent reason the on/off button will flash and the message "power reset" will appear. If I restart the power, it will restart and work for a while but the error re-appears. For a long time it was plugged into a power strip. Since this problem has appeared I have plugged the printer directly into the wall, but the error still occurs. I have tried a full reset, pressing 6 and 9 and restarting the system to no avail. I have tried replacing the power cord to the wall. Any suggestions?

Try a different wall jack. Make sure the printer is plugged directly into the wall jack and not into a surge protector. Other than that you have done all the resets I can think of.
I was an HP employee
If I have helped you solve your issue please mark this post solved.

How to diable power on password for hp pro 3420 all in one

how to disable power on password for hp pro 3420

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this HERE.
HP Pro 3420 All-in-One PC Support Page
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Wireless connection drops after bout 5 min - HP all in one C6180

Hi!
I'm having problem with my all in one product - HP all in one C6180. The wireless network connection drops, and the printer becomes unreachable from both web-interface and printjobs/scanningjobs etc...
This problem has existed since I bought this machine..
I've tried several different setups when it comes to WEP/WPA/WPA2 etc..and also different channels on the wireless, but still same problem exist. The printer works perfect for about 5 min, but then drops the connection it seems like. I'm having about 5-6 devices connected to my wireless router (Draytek VGI 2910), and all seems to work perfect together except the C6180.
At this moment I'm running WPA2 for security on my network. I've tested the software both on Win/ Mac, and currently running the Mac-version.
Is there any firmware-update out that could solve my problem, or how else should I manage it to work properly?
Thanks for any help!
/V

There does not appear to be any firmware update on this page. It could be a router issue.
Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, set a high IP address, like .250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (ends with .1) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

My hp 4580 "all-in-one" scans one page and then ... "scanner failure - recyle power and try again"

HP 4580 "all-in-one" scans one page and then ... "scanner failure - recyle power and try again"
Not ONE time but, EVERY Time ! WHY ? ! ?

Were you able to make a copy? Just to make sure that there is nothing wrong with the hardware.
Thanks.
I do work for HP. But i speak for myself.
Click the Kudos star as a way to say "thank you" for helpful posts.
Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else.
For more information you can always check the RULES FOR PARTICIPATION

I have 3 consecutive movie clips that I am trying to drop into the drop zone but it only recognizes the first one and only produces the firts one in a DVD. How can I drop all three movie clips into one drop zone

On IDVD, I have 3 consecutive movie clips that I am trying to drop into the drop zone to create a DVD but it only recognizes the first one I dropped and only produced the first one in a DVD. How can I drop all three movie clips into one drop zone.

I have had some luck doing the following: Export each clip from imovie as a quicktime clip. Open iDVD and create a new project. Import a few stills into iDVD and then click on the button that gets created to get into the screen where the individual slides appear. Drag each quicktime into that screen and arrange in the order you want. You can then delete the stills. The button that appeared when you dropped in the stills will launch a complete show.

Power up problems on my HP 7520 all in one printer

My HP 7520 e powered down whilst in the process of printing. when the power pack is disconnected from the printer and powered back up from the mains supply a green light shows on the actual power pack. when the power pack is connected to the printer the power fails immediately.

Hi , Welcome to the HP Forums! I noticed that you are having power up problems on your HP 7520 all in one printer. I am happy to look into this for you! Please try the steps within this guide, The HP Printer Does Not Turn On or Respond When the Power Button is Pressed. As it deals with power related issues. (Even though the guide title may not match your issue, I believe the solutions will help.) Hope this helps! “Please click the Thumbs up icon below to thank me for responding.”

Hp 120 omni ALL IN ONE power on passworde

Got and hp 120 omni all in one that came in a pallet of mixed ALL IN ONE DESKTOPS
this one in particular has a POWER ON PASSWORD
i figured out how to bypass some of these passwords by getting an error code.
the problem is that this one does not give me an error code but a (*) character
any help sugestions?
i already tried removing the jumpers and putting them back in place with no success.
ANY HELP WILL BE REALLY APPRECIATED
This question was solved.
View Solution.

Hello,
For you to be able to remove the Power On password, you need to remove the rear cover, then remove the metal cover that protects the motherboard and remove the jumper located close to the memory modules.
Then try to power on the system and see if that resolved your problem.
Thanks,
I work for HP! Please remember to provide and if this helped click ON

All in one dropping power

Similar Messages

Maybe you are looking for