All in one laser black and white printer

I currently have a Canon IM MF4150 and it prints and faxes fine but I cannot get it to scan with my Mas OSX v 10.6.
1. Can anyone help&
2. What similar laser b7w all in one can you recommend that will scan as well as print and fax.
Thanks

The MF41xx series did not support scanning to Mac OS X. Later models, such as the MF43xx and MF45xx series, do support scanning to Mac OS X via USB using Canon's MF ScanGear application.

Similar Messages

Can you suggest a good black and white printer for OS 9?

I'm going to be using OS 9 for a while and was wondering if anyone could suggest a good black and white printer that I can connect to my Lombard laptop running OS 9. New or used doesn't matter to me as long as I can still get some ink cartridges for it. Thanks a ton for the help.

Okidata printers are the only ones I know of that are current models that have Mac OS 9 drivers.
http://www.okidata.com/mkt/html/nf/b2200-b2400home.html
And I think these are laser printers, not inkjets. I don't have personal experience with them.
For older models that you may find used, HP made good printers. For their inkjet printers, HP put the printhead on the ink cartridge, which ensure that key part will not wear out or get clogged on a older printer.
Make sure the model is not too old; you need USB. To check on a specific model, go to hp's support site. Look up the model by it's name or number on this web page.
http://welcome.hp.com/country/us/en/support.html?pageDisplay=support
From the next page, you can see the specs and open a page with a listing of printer drivers. If there is a driver for Mac OS 9, that model would work.
You can do the same type of evaluation with other brands, such as Epson, Canon, etc.

Why do my PRO-100 black and white prints have a color tint?

I am printing on the PIXMA Pro-100 printer and sometimes, for no apparent reason (?), my black and white prints will have a color tint (usually a "redish brown"), and then when printing again... same print, same settings... the same print will be fine, neutral with no tint at all.
Any ideas why?
Also (maybe related?) I don't understand why the Photo-Cyan and Magenta ink cartridges are being depleted when I am NOT printing color, but only Black and White. Am I missing something? When setting up for printing I always make sure the "Black and White Print" feature is selected in the settings dialog "Quick Setup". Doesn't this insure that only the black and grey inks are used as long as I am not "toning"? In other words... if ONLY the black and grey inks are used, isn't the print supposed to be a neutral black and white print? Again... am I missing something?
FYI:
I am printing on Canon Pro Luster and Plus Semi-Gloss papers.
Under "Options - Color Management" I have selected:
(color handling) Photoshop Elements Manages Colors
(image space) Adobe RGB (1998)
(printer profile) Canon PRO-100 <LU> 1/2 Photo Paper Pro Luster
(rendering intent) Perceptual
Solved!
Go to Solution.

It looks like you have the settings pretty close. But the fact is all printers use all their cartridges to print B&W.
Whoa, why?
Yes it is true and the reason is this. B&W consists of 256 shades of gray. From totaly black which is 0 to white which is 256.
If you have just one, two or three cartridges to make 256 different blacks and grays all the way to white, it simply isn't possibile.
The ony thing a printer can do is, amount of ink and how long. So it makes up for this by using all it's cartridges. However, in Canon it seems like the Pro-100 tints show up more than it should. There are dedicated B&W printers but they are designed differently to accomplish true B&W.
The tint will be different on different papers. You can experiment to find the paper that does best for you. Try a more gloss type paper and see if you like the B&W. You can try Red River papers, too. They will assist you in picking a good B&W paper.
You can also experiment with filters in PSE. Adding a little blue may help. Just give it a try.
But the bottom line is you are no doing anything wrong. It is just the charchter of the beast.
EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

While using my Iphone 5, all of a sudden black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

While using my Iphone 5, all of a sudden black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

Try resetting your phone, hold the home and sleep/wake button down until the apple symbol comes up, then release. If that doesnt work, you may have damaged your phone and need to take it to an apple genius bar.

Lexmark C54x - True Black and White Printing

As shipped this 1200dpi color laser printer - C543dn works with Leopard over a network (yes!).
There is only one thing I wanted to do that was not obvious - how to force black and white even when printing originally color images, and make sure only the black toner is used. A lot of websites use color, of course, and you may not want to pay for that either in time or toner!! As you probably all know the quartz filter option has been removed in Leopard, so unlike "another OS" you don't have a simple printer-independent "print mode" setting to set to black and white.
After a lot of looking around for a manual which details the printer driver options (there isn't one - confirmed by Lexmark support) this is what I have puzzled out. BTW - There is an alternative approach that involves saving to pdf, and then using preview to resave the pdf with the quartz filter applied - but this is simpler if all you want to do is print.
Basic stuff - Printer Independent
You have to do the set up within "Print..." within in an application (like Firefox or Safari). When you select a Printer in the print dialog you can also use a Preset - it appears in the field under the printer name in the print dialog. To set up the profile the way we want it, first use the "downarrow" to the right of the printer name to access the extra print dialog options.
Now you need to get the Mac to turn everything color in the output to gray - you do this by finding the "Color Matching" option -- its in a pull-down list (half-way down the expanded dialog, in some applications that list starts with the app name (like "Mail"), sometimes its in a list that starts with "Copies and Pages" - each application chooses how this page looks, adding to the confusion). Inside that option, you select "ColorSync" radio button and find the "Generic Gray Profile" in the pulldown. This is the replacement for the quartz filter. But that doesn't mean the printer will only use Black toner... that would be too easy!
Printer Dependent bit - in this case Lexmark C543.
Now move to the "Printer Features" options (also in the list that has "Color Matching") and a new sub-list pulldown will appear - for the Lexmark it has "Quality 1" as the first option.
- In this sublist select "Quality 1" - set the Resolution field to 1200 dpi.
- Then select "Color" (still in the sublist) and set the Color Correction field to "Manual".
- Finally go to the "Manual Color" in the sublist and set all 3 of the RGB fields (Image, Text and Graphics) to "Display - True Black".
After doing all those settings, go to the Preset field pulldown (the one under the printer name at the top) and select Save As... Give it a nice name (Black and White, perhaps?). This way you can recall this preset and all the settings easily. For color you can just go back to the Standard preset.
Now you can print your monochrome masterpiece.
This way I definitely got black and white (grayscale output). Verifying that only black toner was used is not a slam-dunk but it looks like it was. Anyone who has better info on the printer driver and the correct settings (maybe this was overkill even?) please feel free to correct/enhance.
Hope this helps someone else.

I really like the printer. It is fast, and it was a breeze setting it up as a network printer. Built in duplex is also very cool.
The only drawback is that it uses a lot of toner, which gets expensive. So far I have gone through two black cartridges printing a little over 3000 pages. According to Lexmark, one cartridge is supposed to last 2500 pages, so that doesnt seem right. The pages I have been printing haven´t been THAT full.
But maybe this applies to other brands as well? This is the only color laser printer I have owned.
Anyone else with experience on this? I have been looking for toner refills, but so far no luck..

Black and white printing using Gutenprint

My HP printer has no drivers in SL, but I can print using Gutenprint.
The Gutenprint FAQ says
For most users, the work-around is to set the Color Model setting to Grayscale. This is not the same as printing in black and white only, but it may give you what you want.
For those users who must use black and white only, the good news is that the Quartz Filter for Black and White still exists. It's just not tied into the print window. The easiest way to use the Black and White option is as follows:
Go to print the document. Use the item "Open PDF in Preview" item under the PDF Services drop down menu at the bottom left of the print window.
When the document appears in Preview, choose Save As... from the File menu.
You can either change the name or use the Replace option when prompted. Select the output format as PDF and use the Quartz Filter to select "Black and White".
Make sure you have the name and location to save the document as you want it. Click the Save button.
The resulting document will be in Black and White and you can print it normally.
I can guess what this means, but I am not certain, so I would be glad if someone has a definitive answer.
My guess is that Grayscale usually prints using the colour cartridge, but that following this procedure lets one print using the black cartridge only.
This is an important issue. Given the cost of colour cartridges, I only want to use them when I need colour, not for plain text.
I would also be interested to know the difference between the two colour modes available, labelled Color and CMYK, but this isn't so important.

Welcome to the Apple Discussion boards.
The product brochure for the DP-C213 shows that PostScript is an optional add on. Are you sure that you have the PostScript module installed? Without the optional PostScript module, you will only get the raw PostScript code when you use the PostScript driver.
The Gutenprint generic PCL drivers do not print color. They are grayscale only.
The product brochure for the DP-C213 does show that it comes standard with the PCL 6 printer module. The best color driver would be the pxlmono/pxlcolor driver. You can download all you need from http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/pxlmon o. You will need to install three packages. The pxlmono, Foomatic-RIP, and the Ghostscript package.
Now for the confusing part. When you go to set up the printer use the *"Generic PCL 6/PCL XL Printer Foomatic/pxlcolor (recommended)"* driver. That will give you color printing. The OpenPrinting database is in error and only shows your printer to be a grayscale printer, so you *do not* want to choose the "Panasonic DP-C213 Foomatic/pxlmono (recommended)" driver. That driver will only produce grayscale printing.
EDIT: The URL for the product brochure is ftp://ftp.panasonic.com/pub/Panasonic/business/office/brochures/DP-C213_Brochure .pdf
Message was edited by: Matt Broughton

Black and white printing with a mac

I recently switched from a Dell Windows PC to an iMac with OS 10.9. I am using my old HP 6500e 710a Officejet All in One.
I typically print most of my documents in black and white which was available on the Windows 7 driver version.
On the iMac OS 10.9 driver version, I can only print in black and white in "draft" mode.
Based on another posting I saw on this forum, the drop down menu for another HP printer (I think 8300) had the feature to select B&W printing in any quality. Also, it had "grayscale" selectable.
I appears that my driver version V2.4.0-2 does not have the full compliment of options. HP needs to update this OS 10.9 driver.
Can anyone HELP!
This question was solved.
View Solution.

happytohelp01,
I received a response from HP Support pointing me to the following Apple software driver on the Apple support website; HP Printer Drivers v.2.16.1 for OS X.
It was at "http://support.apple.com/kb/dl907". Once I loaded it, I was given the following instructions:
Step 3: Change print settings
1. Open the document that you want to print
2. Click on File and then Print
3. Make sure the correct printer name is selected.
4. Below the Orientation option, there is drop-down menu. Select Paper type/Quality (Refer to the attached screenshot)
5. Click on Color Options.
6. Select Greyscale under Color
7. Click on Print.
You can create a Preset using the below steps so that you do not have to change the settings every time you print.
1. Click on Presets menu
2. Click on Create new Preset
3. Assign a preset name
4. Confirm to create the preset.
Next time, you can select this preset name to get the settings that you have made.
This allowed me to print in B&W at Normal quality.

7520e: black and white prints have blue cast

Black & white prints have a blue tinge to them and are not true black and white.
Is there a good explanation of what all the various controls do, in the Print dialogue boxes?
Thanks.

Hi @organgrinder,
Your print Dialog box sometimes varies depending on which program you are printing from, but, I found some potentially helpful information about advanced color management;
Using the default sRGB modeThe default sRGB color space is the most common setting for print jobs. As mentioned, most images are sRGB, and using sRGB delivers automatic high-quality color without user intervention. When sRGB is selected, the driver controls the color management. Color management should not be attempted with ICC profiles while the driver is set to sRGB mode. Doing so will usually result in lower color fidelity.
Using the AdobeRGB mode
The AdobeRGB Color Space mode is designed to provide compatibility with emerging camera functionality. This mode can be used for printing photos from digital cameras that support the Adobe RGB color space. For example, if a camera is set to Adobe RGB while capturing photos, those photos can be printed from any application by using this color space selection. For print jobs that involve significant editing or graphics composition in the Adobe RGB color space, ICC color management may give better results. Color management should not be attempted with ICC profiles while the driver is set to AdobeRGB mode. Doing so will usually result in lower color fidelity.
Using the ICM color management mode
ICM color management should be selected for the following reasons:Creating ICC profiles to manage printer color
When using an application such as Adobe Photoshop, which supports the selection and use of ICC profiles.
From the perspective of the printer driver, the ICM Color Management selection does one simple thing: it turns off printer color management. If this option is selected from an application that does not allow for the use of ICC profiles, or if no profile is selected for the printer, the resulting prints will be dark, vivid, unmatched printer colors. By disabling printer color management, the high-end user has complete, control over the color matching process via the application.
- Source: Overview of Advanced Color Management
Whether you are printing from paint or another program, one thing you might consider trying is enabling the HP Real Life Technologies.
- Source: Changing the Print Settings in Windows
And finally, the last thing and maybe the least helpful or possibly the most helpful, you may need to Change color management settings < < < Click here
Clicking The thumbs up icon below, helps me see that you are grateful and/or pleased with my post! If you have any additional questions, or if I have not answered your question to your satisfaction, let me know as I will happily do all I can to assist you
I hope this helps.
EDIT: I found something else that might be useful; Fixing Print Quality Problems for the HP Photosmart 7520 e-All-in-One Printer Series
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

PSC 1200 Black-and-White Print Option

No matter the program, whenever I go to "print" I am not given the option to print black-and-white. I use Windows Vista. Print functionality is fine. My PSC 1200 will scan and copy black-and-white. It just is not a print option from any program or from the printer specs. Does anyone know of a driver update or patch or other solution?

Some tabs are available only when accessing the Printer Properties from the Printers folder; however, the contents of the print settings tabs are the same no matter which way they are accessed.
From an application
Make changes to the print settings before printing from most applications. To find these options, click File and then click Print . Click Setup or Properties to open the printer properties. Changes made to the print properties from within the application do the following:
Do not modify the system default settings.
The changes are temporary: When the application is closed, the settings revert to the system default settings.
Affect only the application they are made in.
From the Director software
To change the print settings from the Director software, click Settings , and then click Print Settings . Changes made to the printer properties (settings) from the Director software have the following affects:
Modify the system default settings.
The settings are permanent and remain in effect until they are modified again.
Affect all applications.
From the Printers folder
To change the print settings in the Printers folder, from the Windows desktop, click Start , click Settings and then click Printers. (In Microsoft® Windows XP, click Start, and then click Printers and Faxes .) Right-click the HP all-in-one printer driver and then click Properties .
Changes made to the print settings from the Printer folder have the same affect as those made from the Director software. However, several additional Properties tabs are available and the Services tab is not available. The additional tabs are listed below:
General
Details
Color Management
Sharing
Regards,
AlmostThere

Black and white print from iphone ipad app

How can i print in black and white from ePrint or all in one app?

Hi,
As far as i'm aware there is no option to print in B/W from either app. As a workaround for this, I'd suggest opening the photo in the photo viewer on your iphone and select the edit function. From the list of filters available, select mono and this will give you a B/W print.
To return the photo to it's normal colour, select the filter "none".
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

How to remove horizontal lines from black and white prints in LR 5?

hello, i have LR 5 on my iMac running Mavericks OS...i am very happy with it except for when i print from the print module when the pictures are black and white...color seems to be fine...but, the problem is that there are vertical lines space evenly apart running down the pictures...generally if it is with sky as a background...but the lines do run through the main subject as well...any suggestions...thanks in advance...

thanks for your reply...my printer is an HP 7520 Photosmart...i have done all of the diagnostics on the printer and everything seems to be fine...it doesn't do the line thing when the pictures are in color...or, if in b/w, in a closeup...

Why do my black and white prints have a colour cast?

I've been trying to print some old black and white photos that I've scanned into iPhoto. Last year this worked fine, but now all the prints have a pinkish-brown colour cast. As a check, I opened the same photos in Preview and printed from there and they all printed perfectly, so the problem is in iPhoto. I've been through all the colour-related options in the iPhoto print menu but to no avail - no setting makes any difference, not even ticking the greyscale printing option. Does anyone have any ideas? I'm using iPhoto 09.

A good general step for strange issues is to renew the iPhoto preference file - quit iPhoto and go to "your user name" ==> library ==> preferences ==> com.apple.iPhoto.plist and trash it - launch iPhoto which creates a fresh new default preference file and reset any personal preferences you have changed and if you have moved the iPhoto library repoint to it. This may help
This does not affect your photos or any database information (keywords, faces, places, ratings, etc) in any way - they are stored in the iPhoto library - the iPhoto preference file simply controls how iPhoto works - which is why renewing it is a good first step.
LN

HP7960 black and white prints half purple

We use the HP7960 mostly to print copies of black and white photographs. The copies start out fine, but change to purple about midway through the page. I have set the color to Grayscale but it doesn't seem to make any difference. It is very important that we get good copies of these historic photographs. How can I correct this?

Likely your color cartridge is running low on yellow ink. When printing graphics the color cartridge is used because it provides better print quality than using the black cartridge. If you are printing on photo paper the photo and color cartridges will be used, the black ink is not compatible with photo paper.
Replacing the color cartridge with a fresh #57 one should resolve your issue.
If you are printing on photo paper replacing the #58 photo cartridge with a #59 photo gray cartridge may give you better results.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Pin names and numbers do not print with black and white printer setup option

Multisim V12
Printer HP LaserJet 1320
File -> Print Options -> Print Sheet Setup, check In black/white, OK
Then
File -> Print Preview, shows all elements of the drawing in black white
Then select Print and the drawing prints without pin names and pin numbers.
The same procedure with the black/white unchecked previews in color and then prints all circuit elements

Hi HiZTrace,
I used Multisim 12 with the same configuration and printed with a HP LaserJet 4250, but it seemed to be working well for me. There could be some incompatibility issue with your printer driver. A workaround you can try is to install a PDF Converter and print the file in color, then print the generated PDF file in black and white. There are many PDF Converters available, for example, CutePDF Writer (free)
Sorry for the inconvenience.
Derek Z.
National Instruments

Black and white printing problem on Epson Artisan 50

When I print a black and white photo on glossy paper, I don't get black and white. I get a kind of purple hued black and white. Black text below, however, is perfectly black. So it seems it's not some kind of fault with the ink. I am choosing "black/greyscale" rather than "color". Any idea why this is happening and how to fix it? I have tried printing from different apps, including Preview, and same thing happens. Also different black and white images.

Yes, should be, but I'm not. Epson ink, Epson paper and same problem. The image is black and white. Converted in Photoshop. Print is set to "quality". Epson controls color. Not vivid. Paper is set to glossy. All as it should be.
What I have found by searching is this quote:
"Inkjet printers use their color inks and the black ink to generate B&W prints. But there are some noticeable drawbacks in doing it this way. Namely the possibility of having a color cast on your B&W prints, which is a barely perceptible color tint (usually green or magenta) that prevents your print from being true black & white.”
Other pages confirm this issue, so it seems that you just can't get decent, true black and white with a color printer. At least this color printer.
Do you find that when you print a black and white image you get true black and white with no color cast? Interestingly, I do when I print on plain paper, but not on glossy.

All in one laser black and white printer

Similar Messages

Maybe you are looking for