All in one printer only able to print

Okay, before you say anything about how faxing, using the scan features and the card readers are not supported, let me say that I totally understand and know this.
Here is why I'm posting....
I had an airport express before, it broke and now I have a new one. On the old airport express (purchased in 2005 I believe) I COULD absolutely see the card reader. I had no problems whatsoever. I was told that it wasn't supported, but none the less, there it was! I could download photos and movies from my SD card.
So I was sad to see that when I got my new one (purchased a week ago) the card reader didn't show up as a removable drive. I was so upset!
Does anyone know how, if at all, that I can make this work again?

Be patient.
If you read some other posts, lots of people have been having problems printing wirelessly on Leopard and Airport Express/Extreme and Time Capsule. It's not a matter of printer drivers, but probably of Leopard itself. Considering how many posts there have been on the issue, I would not be surprised if Apple released a fix soon.
On the other hand, even when the issue gets fixed, your all-in-one will most likely work wirelessly only as a printer, since it doesn't seem that wireless scanning is supported.
Edit: Also, if you have issues limit yourself to one post per issue. The reason why I answered to your post is because I'm having printing problems as well, and I am (apparently) a very kind person. Some other users probably got annoyed by your repeated posts. Just so you know.

Similar Messages

C6180 All In One Printer only prints 1 page per document after Windows 7 64 bit upgrade

I loaded the software for my Photosmart C6180 all-in-one printer as part of a computer upgrade from Windows XP to Windows 7. My printer is networked and everyone else in the house can print to this printer with no problem. However, whenever I try to print a document I only am able to print the last page of a multiple page document. I have uninstalled and reinstalled the driver/software package multiple times to no avail.
Any suggestions? Thank you.

This document may offer some help:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02002372&lc=en&product=1153494&tmp...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

With my hp office 5010 all in one printer, i'm not able to scan, and this is one of his duties. why

with my hp office 5010 all in one printer, i'm not able to scan, and this is one of his duties. why isn't it possible?? Bad ssoftware while downloading it from internet because I lost CD rom. No pilot available for scanning with it??? Bad version of soft??? I bauught this printer because of his utility and space occupped: able to print, copy and scan in same machine, gain of room, perfect, but my scanning function is not working!!!! I would like to solve this damned problem which upset me since several weeks.... Waiting for an answer and a solution, best regards

pmonteil31 wrote:
Waiting for an answer and a solution, best regards
Hi,
Sorry you have to wait longer because I can not find your printer model under Google. Must be very old ?
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Looking for HP Basic Driver only for hp 2610 all-in-one printer

I have windows 7( Just recently installed) and a HP 2610 all-in-one printer.
I just wanted to download the printer driver only and not the HP Photosmart and office software Suite.
This webside say the printer driver only is availble as a separate download named "HP Deskjet Basic Driver"
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76831-1&lc=en&dlc=en&cc=us&...
But I cannot locate the webside for the Basic driver only for Windows 7 OS. Can somebody locate the web address of "HP Deskjet Basic Driver" for me please.
Regards
Tech

I just tried using Notepad as you suggested and had the same result. Paper feeds in stops at proper place and error message "out of paper"
I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem.
I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner. One for black and one for color. The ink icons would change from completly full to just an outline as the amount of ink went down. Currently the black ink icon is missing
This is a very frustrating problem because the printer works great after doing a few steps to get around the problem. The fact that the problem reoccurs any time anything is changed is the major problem
Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs. This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
I want to thank you for all of your efforts. Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer. As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

HP All-in-One Printer: any way to install the TWAIN driver only?

I have an HP PSC 2355 all-in-one Printer/Scanner/Copier.
The Mac OSX software/drivers are a whopping 100MB in size. I really only want to print (which is no problem without installing all of their software) and scan (which I can't seem to do without installing the software.
I can't find a TWAIN driver (which I assume is what I need to scan) by itself. And the installation software doesn't give you a TWAIN-only choice
I've installed the HP software bundle on my old PowerBook (just got a MacBook), I really don't want to litter my new computer with all their useless "features"...
While this is probably a question for HP, thought I'd post it here.

You can try a program like VueScan.
http://www.versiontracker.com/dyn/moreinfo/macosx/7610

All in one printer won't print black ink - colour only

My all in one printer won't print in black right now - colour only - even though the black ink is new. It will print a couple of black ink pages and then reverts to colour. If I give it a rest it will print a couple more black pages and then again, in colour - I think something needs cleaning but I don't know what - any help is much appreciated! Val

Please read this post then provide some details. What printer model? What operating system? Is the black cartridge an original HP or a third party or refill/renamufactured cartridge? (The symptom is typical of a poorly refilled cartrdige....)
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I am not able to connect with my Epson all in one printer

I am having Epson All in one printer which is being installed on my HP notebook. However, i am not able to print from this notebood as it says communication port is not available. I am able to scan, but can't able to print. My operating system is Windows 7 home edition. Please help me to resolve the issue.

What happens when you try?

I have 1 HP Officejet J6480 All-in-one printer, when I print a page off of the net, it only prints o

I have 1 HP Officejet J6480 All-in-one printer, when I print a page off of the net, it only prints one top line (ex: Page 1 of 1) and it only prints the footer. It does the same with my HP Deskjet F4100 series printer.

Call and/or check HP Support website for updated drivers. You can also check KB Articles: http://support.apple.com/kb/HT3669 Printer and scanner software available for download
and http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
What to do when you can't print

Not Able to Find Drivers for HP Photosmart Plus e-All-in-One Printer B210e

I have an HP Photosmart Plus e-All-in-One Printer B210e. I went to try and get drivers for it and I either get a page that says
404 Page Not Found
Try going back to Support Home
The other page I get when I look for drivers is for HP Photosmart Plus e-All-in-One Printer series - B210 and I click on Software and Driver I get window on the screen to select my model. The models listed are B210a/B210b/B210c. B210e IS NOT LISTED. Where are the B210e drivers.
dv6500t (Windows Vista SP2 x86)/dv7-1275dx Windows 7 Home Premium SP1 (x64)/HP Photosmart Plus e-All-in-One Printer B210e/MacBook Pro (Mac OS X 10.7.5/Windows 7 Professional (x64) SP1)

Hi
Try http://ftp.hp.com/pub/softlib/software12/COL34268/mp-109398-3/PSB210_1315-1.exe
The installation is also possible with HP Printer Install Wizard for Windows:
http://ftp.hp.com/pub/softlib/software12/COL50403/mp-122330-1/hppiw.exe

Driver question - my all in one printer will print but not scan

Hi
I have an HP c4280 (you know, the all in one printer you could get for free with the mail in rebate in 2007). I just plug it in and my mac recognizes it as a printer, and it prints fine, but image capture does not recognize it as a scanner. Before I upgraded to leopard I had all of HP's stupid software installed but after upgrading to leopard it didn't work (surprise). A lot of other things didn't work either so I did an erase and install and now everything works beautifully (I feel like I have old Tiger back, but better). However, I do not want to install HP's stupid overbloated and highly unnecessary mountain of software on my nice new clean system (I have turned into kind of an apple-only purist I guess ^_^). I checked HP's website and all they have is the same ginormous software bundle for download, and the installation wizard does not allow the option to install only components of the software (its all 28 programs or nothing). So, my question is, does anybody know where I can find only the driver I need (or WHAT driver I need) to make this printer compatible with image capture so I can scan?

You need to download the full featured driver from the HP site, and it also seems HP has an update for the Leopard installation as well.
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=219&lc=en&cc=us&dlc=en&produc t=3192753&lang=en
I too have a C4280 and wasn't able to use my scanner until I had fully installed the HP software.

Problem with installing Solution Center for a HP Photosmart Premium All-in-One Printer - C309g

Hi folks,
I've searched many threads and found some directions to remedy this, tried them and have had no luck.
I'm running Windows 7. All updates are current. When I bought the printer I installed the software (on Windows 7 OS) from the disc and everything was fine. Fast forward a year and Solution Center stopped working.
Uninstalled all HP software to reinstall. I was only able to reinstall HP Update. I was able to load the basic drivers for print and scan, but not the entire software suite including Solution Center. The installation stops abruptly after "installing updates".
I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.
What can I do with my printer (HP Photosmart Premium All-in-One Printer - C309g)???
Thanks,
Alex
This question was solved.
View Solution.

Hi jerseyal,
I hate to hear you are having issues. What suggestions have you tried? Did you get an error when installing? How are you connecting the device? Before completing the below steps run the print and scan doctor to see what it indicates and if the issue is resolvable through that tool(click + beside utility diagnostic tools, then download beside print and scan doctor). Click Here
If you are still experiencing the issue the steps below may help resolve it.
Try using the scrubber built into the software, then reinstalling from the current download available on the website.
From original printer installation CD:
1. Insert CD into drive, and then cancel the installer
2. Open My Computer, and then right click on the CD drive and chose open
3. Open folder Util
4. Open folder CCC
5. Run the uninstall_ L4.bat for non-HP computers only.   For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Use the following tool to clean the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional.   You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
10. Download the full feature software and drivers Driver Link
11. Run the download to reinstall the printer
From a download:
1. Run disk cleanup on your computer
2. Download and run the software and drivers below.
3. Once the download is done extracting, cancel the download. Driver Link
4.. Press the Windows key + R on the keyboard to bring up the run menu.
5. Type %temp% in the run field and click OK.
6. Look for, and open the folder starting with 7z (Example: 7zS2356)
7. Open folder Util
8. Open folder CCC
9. Run the uninstall_ L4.bat for non-HP computers only.   For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused.
10. When the uninstall has completed restart the computer
11. Run Disk cleanup from Accessories\ System Tools
12. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
13. Use the following tool to clean the system and registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional.   You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
14. Download the full feature software and drivers Driver link
15. Run the download to reinstall the printer
Note: Depending on type of security software it may need to be disabled when re-installing unit. Also make sure the Adobe flash player is up to date.
Hope this helps!
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

HP Officejet 4500 All-in-One Printer - G510g installation windows 8.1 64bit

After operating a HP Officejet 4500 All-in-One Printer - G510g from both an old Windows XP notebook and from an ASUS Windows 8, 64bit laptop, subsequently updated to 8.1; I'm now trying to install it to run from a Toshiba Satellite NB10T-A notebook Windows 8.1 64bit, but without success.
The original installation CD does not provide an installation but on start up (presumably because it is only compatible with Windows XP and 7.
The www.hp.com site offers a download of a full driver for the printer, forWindows 8.162bit. This seems to download fine. The file unpacks, says it is installing, but on completion the driver is not available.
There are no options to uninstall, either in control panel/printers or in control panel/software.
Without the driver, the Windows 8.1 system recognises the printer and allows simple printing ffrom applications. However, it is not possible to use the scan options, giving the error message that the driver is not available. Neither HP Solution Center or HP Document Manager are installed.
I have tried HP Print and Scan Doctor. This recognises the printer on USB link, says that there are missing drivers, downloads, unpacks and installs drivers. But the printer icon in control panel/printers continues to have an alarm icon and indicates that the printer is still missing drivers.
I have also tried the HP Printer Installation Wizard. The result is similar.
Please advise how I can install the scan options of this equipment and confirm that the machine is compatible with windows 8.1 64bit.
Thank you
This question was solved.
View Solution.

Hello @monc , welcome to the HP forums!
I read through your post about how you cannot scan on your Windows 8.1 computer as the driver and software doesn't seem to be completing successfully on your system. However, you have been able to install the printer and its functioning fine on other computers.
I would suggest checking the Control Panel to see if there are any printer files to uninstall: Uninstalling the Printer Software
Restart the PC afterwards
Perform a Clean Boot
Restart the PC again
Download and install the printer again: HP Officejet Full Feature Software and Driver
If you see any error messages or codes during the installation process, make note of the exact problem or error and post me back a screen shot or the details.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet J4680 All-in-One printer is ghosted and renamed "HP Officejet J4680 Series (Copy 1)?

Printer Model, Notebook or Desktop Model Number: HP Officejet J4680 All-in-One Printer
Operating System (including service pack revision): Windows 7 64-bit Home Premium Service Pack 1
Error messages: None
Recent hardware or software changes made to the system: None
Problem Description: HP Officejet J4680 All-in-One printer is ghosted and renamed "HP Officejet J4680 Series (Copy 1) and a new printer appeared: HPD8D625 (Officejet J4680 series). I don’t know how this all came about or why?
I used the HP HPD8D625 for a while but it took a long time to began to print and only buffered a small amount. I went back to my stand by printer, but know my wife want to use the wireless network to do her printing, so I have to fix it.
Connection Method: Wireless
Diagnostic Summary
Troubleshooting performed: Yes
First Wireless Network Report:
Everything: Passed
Signal Strength: Excellent
Other networks detected matching your network name (SSID): No
Configuration Summary
Network Name: Correct
IP Address: Correct
Config Source: DHCP
Communication Mode: Infrastructure
Authentication Type: WPA-PSK
Encryption: Automatic (AES or TKIP)
Second Wireless Network Report:
Network Name: Was different
Of course that disrupted the whole report.

BH
Thanks for responding. What I did today was hard wire the printer to computer. then was able to get my original printer icon back and it was set as the default printer. I deleted the other icons, they were ghosted and I didn't what to use them. the one was a online printer going back to HP. Now I have to got my son to fix the remaining problem I have, with my messing around I somehow change the Network Name on the printer. He is a computer eng working on high tech cameras and also is the administrator of my machine. He has me locked out of administrative rights and for good reason, I wrecked a couple computers and when he built this one for me that was the rule. There is a little info that I don't have to finalize the last step in changing the Network Name back. I have run the printer from the printer control panel and it did find the correct Network and Network Name but is seemed like that is far as I could go. So I'm not that far from completing this project.
LH

HP OfficeJet 6500A all in one Printer . No European size envelopes apart from C6 on the printer.

We have the OfficeJet 6500A All In One Printer. It is on a network to two computers one using Windows Vista and the other Windows7.
It seems strange that the only size of envelope for the European Market is a C6. There is no facility for customising a DL or C5 which are the other two popular sizes of envelopes. We cannot customize from either computer. We have tried altering the specifications of other envelopes listed for the printer but to no avail. Has anyone got a solution to this problem or are we going to have to wait for HP to upgrade the printer programme. Word Perfect Office X4 is the word procesing programme in use plus a basic Microsft Word that is OEM.

Hi jspin3,
I'd like to help. For now, I would hold off on the uninstall and reinstall. Can you answer some questions?
Is the printer connected by USB, Ethernet or wireless?
Do you get any error messages?
Does a blank page come out or do no pages come out when you try to print from the computer?
If you put a document face down on the scanner glass, are you able to make a photocopy?
Can you estimate the ink levels, in percent full for each cartridge, by looking at the printer ink gauge? Click Here
If you print a Self Test Report, do all of the colors print?
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

All-in-one printer via Print Server

Hello-
I'm trying set my HP PSC 1610 All-In-One printer up to be shared and get it off the desk and into the closet. I'm thinking that a little printserver would handle this quite nicely but I'm concerned about how scanning would work through the print server. I can't find any information about this online and since the 1610 is not network enabled by default I'm worried I won't be able to scan. Any experience with this?
Thanks.
troy

HP wrote its OS X drivers to ONLY work via USB. If you can find third-party drivers, you may be able to get it to work. Networkable OS X "CUPS" print drivers:
http://www.linuxprinting.org/macosx/hpijs/
or
http://www.printfab.net
Networkable scanning drivers:
http://www.sane-project.org/sane-mfgs.html

Scanning from all-in-one printer to Elements

I have a Dell 4000 desktop computer, running Windows 7, 32-bit version, an Epson Stylus SX515W all in one printer/scanner etc, and Photoshop Elements 6. I am told that I cannot scan from my Epson scanner to Elements 6, and that I will need Photoshop Elements 10 to do this.
1. Is this correct?
2. If so, do I have to buy a full version of Elements 10, or can I buy an upgrade?
3. If only an upgrade is needed, what is it called, what will it cost and where can I download it from?
4. If I have to buy the full version of Elements 10, will I need any other software to get it to scan images from my Epson Stylus SX515W?
5. Where do I have to look to find your reply?
Best wishes
Nick Bannister
[email protected]

Hi Nick,
First of all I would like to inform that PSE 6 is not tested on Win 7 and is very old version.
In order to scan from PSE, you will need Twain plugin which is required to scan from within Adobe Applications.
To check if you already have twain or not, follow this :
Navigate to C:\Program Files\Adobe\Photoshop Elements 6.0\Plug-Ins\Import-Export\
If you find a file called "Twain", then you should be able to scan, if not then you have to download Twain from here : http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4688&fileID=4376
Save the file, unzip it and then follow these steps :
Close PSE 6.
After that , navigate to PSCS5OptionalPlugins_Win_en_US\PSCS5OptionalPlugins_Win_en_US\Optional Plug-Ins\Win32, here you will find Twain_32.8BA file
Copy this file and then paste under : C:\Program Files\Adobe\Photoshop Elements 6.0\Plug-Ins\Import-Export\
Launch PSE 6 and check if you get the option to scan under File >> Import menu
If the above solution doesnt work, then you may have to ugrade to PSE 10.
The price for upgrade is $79.99 and full price is $99.99
You can purchase full and upgrade both from Adobe.com website
Thanks,
Baljeet

All in one printer only able to print

Similar Messages

Maybe you are looking for