All-in-one printer via Print Server

Hello-
I'm trying set my HP PSC 1610 All-In-One printer up to be shared and get it off the desk and into the closet. I'm thinking that a little printserver would handle this quite nicely but I'm concerned about how scanning would work through the print server. I can't find any information about this online and since the 1610 is not network enabled by default I'm worried I won't be able to scan. Any experience with this?
Thanks.
troy

HP wrote its OS X drivers to ONLY work via USB. If you can find third-party drivers, you may be able to get it to work. Networkable OS X "CUPS" print drivers:
http://www.linuxprinting.org/macosx/hpijs/
or
http://www.printfab.net
Networkable scanning drivers:
http://www.sane-project.org/sane-mfgs.html

Similar Messages

Macbook Air: connecting Canon Office All-In-One PIXMA MX330 printer

I purchased my Macbook Air a few months ago, and I selected theCanon Office All-In-One PIXMA MX330 printer to go along with it. I have tried to install the printer a few times in various ways. Initially, I used my Macbook Air superdrive to attempt to load my new printer with the included disk. However, installation requires that the printer be connected to the Macbook via USB. Since the superdrive was occupying my only USB, I tried to connect my printer wirelessly with another computer. The laptop I used was not a Mac, and I simply could not get his computer to recognize the disk for my Macbook. So I tried something else; I borrowed my school libraries USB splitter in a last attempt to connect them both to my Macbook Air at the same time. However the superdrive does not react when not directly connected to the computer...
In short, I cannot find a way to connect my Canon Office All-In-One PIXMA MX330 printer to my Macbook Air.
Help?

Connect the SuperDrive to the computer, use the Disk Utility in the /Applications/Utilities/ folder to create an image of the installation disk, disconnect the SuperDrive, plug in the printer, and install the software from the image.
(44558)

How do I direct my HP Photosmart e-ALL-IN-ONE D110 series printer to my Android Tablet?

How do I add my HP Photosmart e-ALL-IN-ONE D110 series printer to my Android Tablet?

Hi,
Given your ptinter supports print from Android, you need an app called HP ePrint. Please use Google Store to install it:
https://play.google.com/store/apps/details?id=com.hp.android.print
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

The HP Deskjet 3050A All-In-One J611 series printer I just bought is not compatible with my Mac Book Pro. What do I need to do?

I recently purchased an HP Deskjet 3050A All-In-One J611 series printer and it is not compatible with the version of the operating system on my mac book pro. I am currently running on OS X 10.4.11 and the printer is compatible with v10.5 or higher. What can I do to update the operating system on my Mac Book Pro?

10.5 will be harder to find & more expensive, I think I'd go for 10.6
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Apple no longer has it for sale.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA

My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.

My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time. This is especially disconcerting at Christmas time when you're trying to get Christmas letters in the mail! Any help?

The cyan portion of the printhead may be clogged. I would suggest running the diagnostics shown here. If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?

Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?
Operating System: Windows Version 8.1 PRO
When I upgraded from Windows 7 to Windows 8.1, my HP Photosmart Premium all-in-one C309n-s
stop working. Is this printer not compatible with Windows 8.1 PRO? Is there any update for this?

Hey,
HP Photosmart Premium all-in-one C309n/g printer is compatible for Windows 8.1
Please uninstall your printer's old software then install new one for windows 8.1.
HP Photosmart Premium All-in-One C309 Series Full Feature Software and Driver :
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109711-1&cc=us&dlc=en&lc=en...
Kevin_US_CA
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the left side of my post to say thanks!***

I got my first Mac 2 weeks ago, a Macbook Pro. I can't get it to scan on my HP Laserjet1217 nfwMFP all in one. It prints (wirelessly) just fine. But when I try to scan, it says something like "no scanners available". Wireless or connected, it's the same.

I have not been able to get my new Macbook Pro to scan, either wirelessly or connected, with my HP Laserjet all in one M1217 nfwMFP printer. It prints wirelessly just fine, but if I try to scan, I get the message that no scanners are found. The guy in the Apple store had it scanning just fine with a new HP printer he took out of the box. Any ideas would be appreciated.
Allan 113

I would check with HP. Your scanner may need a firmware update and updated HP software. Start here:
http://www8.hp.com/us/en/hp-search/search-results.html?qt=LaserJet+m1217nfw+MFP& cc=us&lang=en&charset=utf-8&qp=&hpn=&hpa=&hps=&hpr=&cat=&current_url=CSSres
then here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=219&lc=en&cc=us&dlc=en&sw _lang=&product=4075472

Upgrade Deskjet 3050 all in one J610 to print Apple AirPrint?

Anyone knows if you can upgrade Deskjet 3050 all-in-one j610 to print AirPrint from my Ipad?
Or in a way to work around printing to this J-model from my Ipad?

The Deskjet 3050 does not support AirPrint. AirPrint requires firmware in the printer that understands the AirPrint format.
You can use the HP ePrint application,
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02775166#N58
https://itunes.apple.com/us/app/hp-eprint/id299531647?mt=8
or
Try the HP All-in-One Printer Remote application,
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03561640
https://itunes.apple.com/us/app/hp-all-in-one-printer-remote/id469284907?mt=8
I am an HP employee.

I have HP J3640 all in one. The printer is printing extremely slow

I have HP J3640 all in one. The printer is printing extremely slow.

Hi,
Please use the following instructions to check and fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01080660&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
I would check ink level first and reseat (not reset) the cartridges.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Using HP 6500 all in one and cannot print on Versacheck forms

HP 6500 All in One will not print on Versacheck forms from Microsoft Money.

Hmm, that is troubling. What operating system are you running on your laptop?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

My HP psc 1210 all-in-one, suddenly stopped printing any text. it will print the graphics.

I believe I have tried everything. The HP psc 1210 series all-in-one refusses to print text. nor will it scan or copy. I have done all the troubeshooting that I can find. Still will not print from PC or copy. I think it will scan to the computer. Icon with gray circle around it, states it is offline, yet from the control panel, printer and faxes, shows it as being online and ready. What else can I do to remedy this problem? Thank you in advance.

There may be 2 separate issues here.
-For the offline portion, check this document out:
Printer is offline
-For just printing graphics, this would make me think that the Black cartridge is empty/low on ink/malfunctioning. Try printing a black and white picture. That would let you know if it is the cartridge or not.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

C3180 Photosmart All-in-one won't print. Gives message 'clear paper jam.' There is no paper jam.

C3180 Photosmart All-in-one won't print. Gives message 'clear paper jam.' There is no paper jam. About a month ago there was a paper jam, but was removed. It worked fine since then until yesterday. I've tried all the HP trouble-shooting suggestions- unplug, take apart, manually move carriage, etc. and nothing has solved the problem. The paper does not advance...all that happens if I try to print is a lot of noise like carriage going back and forth and after a/b 1-2 minutes it will show the "red X" blinking on the printer and a message on the computer screen, "Clear paper jam." When the problem first started yesterday the message was that the printer was "Out of paper." I need to print a resume and this is just the wrong time for someone such as myself with little computer knowledge to try to figure it out. Thanks for any suggestions!

Hi there pattimessick,
You may not need to remove/re-add. Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own (especially connectivity problems) and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

6310 all-in-one won't print!!!!

6310 all-in-one will not print--after reload of driver...driver is up to date---still won't print!!!

What operating system? Does the Officejet 6310 still make copies correctly?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Require all in one kodak ESP7250 printer software for iMac

require all in one kodak ESP7250 printer software for iMac

The software for that printer is available from this Kodal web page:
http://support.en.kodak.com/app/home/src/gosupport/selected/true
You do not say which of the four families of iMacs you own nor the Mac OS version, so that about as far as I can point you.
This forum is for iMacs made before 2006

6150 All-in-One won't print black

My HP Photosmart 6150 All-In-One won't print black. There is a new black cartridge and all the other inks are fine as well. I've cleaned the printhead 3 times and all that printed was yellow. I then ran an alignment. The alignment failed, but it wasn't because of a paper issue. The manual says it could be that the printhead assembly or the sensor is defective. Is it worth getting that fixed, or should I just get a new printer? I've had this one for 8 years and it's worked great until now.

Hi , Welcome to the HP Forums! I noticed that your HP Photosmart c6150 will not print black. I am happy to look into this issue for you! According to this guide, Color Mix or Missing Colors on the Diagnostic Page, it states: Missing colors occur when the printhead nozzles dry out. Since you have tried cleanign the printhead multiple times, and the issue is still occuring, I would consider having the printer serviced/or replaced. Please contact HP, phone support for further assistance. (After you fill out the information, you will be given a phone number.) If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector. Best regards! “Please click the Thumbs up icon below to thank me for responding.”

All-in-one printer via Print Server

Similar Messages

Maybe you are looking for