All in One won't install with Windows 7

I have installed all the drivers for my All in One (Officejet 5610) however the printer itself won't connect and install. It goes all the way up to step 5/8, but then it just gives me an error. Please help!
PS: I installed the drivers using the Windows Vista disc included with my All in One since I figured it was the closest to Windows 7 in terms of Coding and Compatibility.

I mite help you in this..
Here a list of items what micosoft windows does not install...
as said in this list
sony vagas video editer
GTA 4
PHOTOSHOP PRO
Some printers also i cant not install brother to it
Most your problem is windows 7 it self taken out microsoft C++ 2005 redistributable
this software you must have so your installer can install products you need
im not sure you can try one of the items from micosoft
64-BIT DOWNLOAD
or
32-BIT DOWNLOAD
I can NOT say this will work for you
anyway i found window 7 to be not good os i also infrom them this as well...

Similar Messages

My 5250 all in one won't email with Windows 7

Since I installed windows 7 my 5250 all in one won't e-mail anything since I don't have WINDOWS MAIL ANYMORE, and it only gives you windows mail as the only option to email.
Anyone know how to correct this?

In the Start Menu, type 'Live Essentials', and open the option which says to go online to get Windows Live Essentials. This way, you can install Windows Mail.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Where is the IP number for a HP deskjet 3520 e-all-in-one, needed to install into windows 7?

Where is the IP number for a HP deskjet 3520 e-all-in-one, needed to install into windows 7?

Hi - You can print a test page to get the IP address for your printer. Follow these instructions:
On the printer control panel, press the Wireless button ( ), and then press the button ( ) next to Settings .
Press the Down Arrow ( ) to select Print Report , and then press OK .
Press the Down Arrow ( ) to select Test Report , and then press OK .
The printer prints the test page.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

FRUSTRATED - windows 7 64 bit driver HP 6500 709e all in one won't install on 2 computers

Hi,
My son and I both got new laptops for Christmas. I have had nothing but problems installing our wireless printer with its full features. My son's computer is a Dell, mine is a Toshiba. From what I could find both needed the same driver but both have had MAJOR issues getting the install to complete and installing the device. Somehow I was able to get it installed on my Toshiba but the "fix" I used didn't work on the Dell. PLEASE HELP! Thanks
Carol
Sorry I realized I did add much information. The printer is the 6500 all in one deskjet 709e. I have tried installing the 64 bit, windows 7...i also downloaded the update. Eventually it worked for my Toshiba laptop but still can't get it to install on my son's dell.
After numerous tries,
I downloaded the driver for windows 7, 64 bit driver and then downloaded the update. The driver/software wouldn't install the device until I did the update (for my Toshiba) but this is not working for the Dell. Also I did download the troubleshooter and it was useless!

Welcome to the HP Forums Zoney,
I read your post which indicates that you are getting a "MICROSOFT VISUAL C ++RUNTIME LIBRARY" error, when trying to install the printer software. I can help you with this.
Download and install this Patch> Microsoft Visual C++ Runtime Error.
Uninstall the printer software.
Before installing the printer software again, setup the Admin rights on the computer.
Run Command Prompt as Administrator. Go to the start menu, type “CMD” in the search bar. Now, you should see a shortcut for CMD above. Right click on it, and click “run as administrator”. If it asks you for administrative permission, please allow permission. In your Command Prompt window (as administrator), type the following and hit Enter: net user administrator /active:yes
You should see a message saying "the command completed successfully". After troubleshooting is done, you can disable this account by typing the following command into Command Prompt (as administrator): net user administrator /active:no.
Restart the computer, and utilize the new account that is available, which should be named "Administrator".
Here are some more steps you can try if you are still getting the Runtime error.
But it is looking more like a Operating System issue.
Download and install the Microsoft Visual C++ 2010, 2008 and 2005 Redistributable Packages.
You will find the download links to these packages below:
2005 - http://www.microsoft.com/en-ca/download/details.aspx?id=26347
2008 - http://www.microsoft.com/en-ca/download/details.aspx?id=5582
2010 - http://www.microsoft.com/en-us/download/details.aspx?id=14632
Try the installation again please.
Let me know how you make out.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP PhotoSmart 2575 All-In-One Driver/Software Install Issue - Windows 8.1

Hi
I've just bought a new Sony Viao with Windows 8.1 (64 bit) installed.
I'm trying to install my HP PhotoSmart 2575 All-In-One so downloaded the driver and software installer from here:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-110159-1&cc=uk&dlc=en&lc=en...
The file downloaded fine on to my desktop, i double click it and then the Exctracting... thing moves along to 100% then goes off the screen. Then nothing happens. I was expecting some software for the printing and scanning to be installed or some further install files to be added to my desktop.
What do i do next?
Matt

Hi Matt,
Thank you for updating me. I can definitely understand the frustration you must be feeling, especially when things seemed to be going great then it changed.
I have 2 documents to follow next. First, please try the steps in the document titled "Software Installation Stops Without Warning and With No Error Message". When you get to "Step three: Install the Software", it references HP SmartInstall. Please don't worry about using that program as it's specific to some of HP's LaserJet printers. Please use the HP's Printer Install Wizard instead of HP's SmartInstall.
If that document doesn't resolve the issue then please proceed onto the 2nd document titled "The Progress Bar on the Software Installation Stops or Stalls".
Please let me know how it goes. I want to ensure we have your printer installed and working.
Software Installation Stops Without Warning and With No Error Message
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02018709
The Progress Bar on the Software Installation Stops or Stalls
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00836418
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP Photosmart C7280 All In One printer not campatible with windows 8.1

I have an old Photosmart c7280 all in one printer. I bought a new computer that has windows 8.1. HP doesn't
have software or drivers that can make this printer compatible with my new computer. What can I do besides buy a new prfnter?

Hi,
Please download the following Software and Derivers and install on your new Windows 8.1 machine:
http://ftp.hp.com/pub/softlib/software12/COL30662/mp-110038-1/PS_AIO_02_Net_Full_Win_WW_140_408.exe
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Photosmart C7280 All in One installation problems with windows 8.1

Hi,
I have a HP Photosmart C7280 All in One printer which was working fine on wifi with Windows 8. A few days ago I got the prompt to upgrade to 8.1. Following this the printer would not work at all, and I got prompt/warning message to re-install the printer software. So I went to the control panel and removed all the old HP software, and tried to re-install the latest one from the HP site...to no avail.
I have tried doing this a number of ways - manual download, downloading the HP software that determines what software is required, then downloads it for you....
It seems to start unpacking ok, but then gets stuck on 'Checking System' and never progresses to do anything else. Help!
This question was solved.
View Solution.

Hello Cam77,
Welcome to the HP Support Forums. I see that you are encountering difficulties installing your Photosmart C7280 printer after upgrading your computer to Windows 8.1.
I have included the Windows 8: The Progress Bar on the Software Installation Stops or Stalls document. It will walk you through the steps to get the printer installed.
Please let me know if you encounter any difficulties while doing the above. If you do, please let me know at what step things went awry and what any error messages said. Please also include how you have the printer connected (USB cable, ethernet, or wireless). Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP Photosmart C2780 All-in-one won't work with Image Capture

I want to use Image Capture as the scanning software but it won't connect to my scanner (HP Photosmart C2780 All-in-one). When I go to browse devices it shows the scanner but when i click on "Use Twain UI", nothing happens, and it is supposed to ask me if I want to connect. I believe that I have followed all of the instructions correctly but nothing is happening. Does the HP Photosmart C2780 even work with Image Capture? and if it does what am I doing wrong?

Install the HP Drivers from HP.
I installed V9.7.1 from the HP website:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-55650-2 &lc=en&cc=us&lang=en&os=219&product=3204785&dlc=en
This provides 'Hp Device Manager' which will scan images or do OCR on text pages....

Multitouchpad drivers won't install with Windows XP and bootcamp

I just got a MacBook pro with the multitouch trackpad. I have repeatedly reinstalled the driver then told windows to rescan the system, it identifies the trackpad then says "a problem occurred during hardware installation" and the trackpad does nothing at all. I am using Windows XP Pro SP2 and the drivers on my Mac install disk for 10.6.4.

That would probably be what is wrong. All the drivers worked except the ethernet and touchpad. I guess I will be using the wireless and a mouse.

HP PSC 1350 All-In-One won't install on Macbook Pro, PLEASE HELP!! :(

Hi all
I know this has been covered before, but I've done SO many Google searches I just can't think of any other keyword combinations so I'm hoping someone can advise.
I'm running the latest version of OS X, and when I first plugged in the printer via USB, it auto-detected, searched for and installed drivers, after which the printer showed up under Print & Fax, but as a 1300 and not a 1350.
When I proceeded to print from MS Word, the job showed up in the print queue, but it didn't print, and when I opened up the print queue it said the printer was idle - but it WASN'T!
So I proceeded to 'reset the printing system.' After this, I can't even add the printer! Print & Fax refuses to even REGISTER that the printer is connected...
I'm about to pull my hair out - I've banged my head against the wall for SO long trying to make this work, first through a network with my Windows XP PC, and now via a direct connection via USB after rearranging my WHOLE office... If someone could advise I would greatly appreciate it!
Thanks,
Eye.

I had that exact model MFD. You should know two things:
1 it is no longer fully supported. It reports as a 1300 and often doesn't work very well. You can print, after a fashion, using HP's official drivers, but you will get much better results (and drivers which actually see the **** MFD!) from drivers available at the HPIJS Project. <http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/hpij s%23Printers>. The drivers there are mostly developed by HP employees but are NOT offered on HP's site and are NOT given to Apple by HP to be included in printer driver updates. You guess as to why this is, given that they behave much better than HP's official drivers and have since Tiger, is as good as mine. Note that installing the HPIJS drivers turns your MFD into a PostScript (clone) device! Your output is noticeably superior to that produced by the official drivers, and your level of control over that output is increased. (It's also slower, and the PSC1350 was never fast...)
2 while you can print from the PSC1350, you cannot scan. Not under either Leopard or Snow Leopard. VueScan may support the PSC1350 now, I don't know, I bailed a long time ago. I do know that the HP scan software breaks, hard, under Leopard and will not install in Snow Leopard. Note that HP has (finally!) released print drivers for the PSC1350 so that you can print from Leopard and Snow Leopard; when Leopard came out, the only way to print using that device was was to use the HPIJS drivers... and for the first 2-3 months after Leopard arrived, the version of GhostScript that the HPIJS drivers used was broken on Leopard, so it wasn't possible to print at all. My PSC1350 was a paperweight. When I contacted HP's tech support they said in so many words that the MFD was no longer supported either under Leopard or Vista and that I should either use older OSes or get a new printer. I did. I got a Brother. Brother USA Sales should send HP Tech Support flowers.
HP's software for this device is profoundly broken.

Envy 4502 all in one won't print from Windows XP

I just set up and successfully installed the software for my Envy 4502 on an old PC running Windows XP. The internal test page comes out fine, but when I send a document it appears very briefly in the print queue then disappears and the document won't print. Any ideas. I've tried all the stuff that the HP Doctor suggests, uninstalling then reinstalling etc.

Hi @Sianeo
Welcome to the HP Forums. I would be happy to help you print from your Windows XP operating system to your Envy 4502 printer. I understand your print jobs seem to be disappearing from the print queue.
What stuff did you try already? WHat did the Print and Scan Doctor suggest?
Please try bypassing the spooler to see if you can print directly to the printer.
1. Click on start and go to devices and printers.
2. Right click on the printer and click on printer properties.
3. Choose the option "Print directly to the printer".
4. Click apply and then ok.
If this works follow the next steps and try to print again.
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box
Type services.msc and press Enter
Locate Print Spooler and double click on it to open the Spooler properties
Make sure startup type is set to Automatic, if it is not please click on the drop down and choose Automatic
Under Service status, please Stop the server, and then wait a moment and click Start
If bypassing the spooler does not result in a successful print, let me know. Please post back to let me know if the issue is resolved, if bypassing the spooler led to a successful print, and what steps you had performed prior to posting on the forums. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP Solution Center won't work with Windows 7

Are there any current workarounds to using the HP Solution Center (for scanning / faxing / printer) for HP Printers with Windows 7 ?
I have an HP Photosmart C7280 (wireless), have installed, re-installed, un-installed, installed from hp.com, installed from CD from HP, and the Windows 7 drivers for my HP printer over-ride the HP drivers.
I have followed every single firewall configuration for the HP printer software, network configuration, wireless modifications, etc, but windows 7 drivers always over-ride the hp. Either the HP Full Install crashes with fatal errors during installation, or it will work for 5 minutes, and when I reboot the laptop or turn the printer on, the HP Solution Center will share that the installation is incomplete, and to run the setup again.
Although I love my new HP Pavilion Entertainment PC with Windows 7, I'm frustrated that my pile of paperwork to scan cannot be done until the HP "all-in-one" printers are compatible with Windows 7. I can print, but am not able to do anything else.
W in Dallas

Apply the fix shown here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Apple Mobile Device Service (AMDS) won't install with iTunes,either V10.7 or V11. The service can't be started b/c the software is not there. Windows 7 with latest service pack. V11 iTunes installs

Apple Mobile Device Service (AMDS) won't install with iTunes,either V10.7 or V11. The service can't be started b/c the software is not there. Windows 7 with latest service pack. V11 iTunes installs fine, iPod found, no iPhone 5 b/c no AMDS. Error "insufficient premissions to install AMDS" Tried numerous uninstall / reinstall combinations, installed iTunes as administrator, etc. Somethings not right. What the Heck ?

See the following article for dealing with Apple Mobile Device Services: http://support.apple.com/kb/TS1567
Downloading and installing iTunes will not fix this problem. If the other troubleshooting steps do not work, go to the Control Panel and uninstall iTunes, Apple Mobile Device Services, Quicktime and any other Apple program that might be present. Reboot your computer, then download and install the latest version of iTunes.

HP OfficeJet J6410 won't install under Windows 8

Hello to you all,
Two days ago, I bought a new notebook for my daughter. She needs it for her study. It's the HP Pavilion TouchSmart 11-e000ed.
Again, just like the situation I wrote about before in this topic over here (link: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officet-J6410-won-t-install-under-Wind... the OfficeJet Printer J6410 won't install under Windows 8.
Now this is what I've done before the problem occured:
- I made a username and password for her,
- I activated Windows 8,
- I made a recovery-point,
- I took my external DVD writer, installed Office 2007 Home and Student for her (o.k, I know it's old, but it's very o.k - and legal copy -. for her study, used it myself as well and still do, and never any complaints about that one), and activated it,
After that and restarting the notebook;
- the notebeek activated USB 2.0 (it does that automatically at first use),
- installed XPS2OneNote (to use for Office OneNote 2007),
- installed SaveAsPDF&XPS,
- removed Norton Internet Security (I never use it, I use something else for that purpose, but was - and still am - planning to install that on a later moment),
- I made sure the notebook can access the server we have here at home, and made a share for her.
After that I used the OJ_AIO_J6400_Full_Win_WW_140_408.exe file (Dutch, but I'll translate the text in English).
From this point on I will describe as precisely as possible what happened
- - the program extracts some files, no problems there,
- - when the first screen appears, I pressed 'Install',
- - a bar appears, and after that another pop-up that says tha you must allow all HP processes. I pressed 'Next',
- - system is controlled, and after that one must agree with the licence agreements. I checked the box, and pressed 'Next',
- - the system is prepared for installation and - yes! - there it comes... an error message.
The error message says:
C:\users\<username of my daughter.\AppData\Local\Temp\7zS0FF0\Setup\de..
Please not that this is a different message than the one I got before, as I described in my posting before, (link again: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Officet-J6410-won-t-install-under-Wind...
Nonehteless, I assumed that, as before, the problem was with the C+++, just like before. That is why I made the following steps:
- I used the OJ_AIO_J6400_140_408_Scrubber program, run L4 4 times.
- I looked for the KB2565063 update, but it isn't there anymore. So, instead, I ran all updates there are until the system said that there are no updates to be found,
- After that I took the old installation disk that came with the OfficeJet J6410 printer, and (tried to) ran hpsetup.exe. It doesn't do a thing! Literally!!
- after that I tried to run the the OJ_AIO_J6400_Full_Win_WW_140_408.exe file again. No success. I got the same error as before (see above, the ..\7zS0FF0\Setup\de.. thing again.
So, what to do now?
Anyone got some helpfull tips for me? I would really appreciate your feedback / help.
Thank you in advance,

Hi again,
No, it didn't work. And, the solution you offered neither.
This is what I've done.
After downloading the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file, I tried to install it.
It failed. I got an error message similar to the one before.
'C:\users\<username of my daughter.\AppData\Local\Temp\7zS57DB\Setup\de.'
I tried to ran the scrubber again, and the CCCUninstaller and tried again.
Same error message occured.
After that I tried to look for the KB2565063 file again. Found it this time and ran the vcredist_x64 file.
I rebooted the system, tried to run the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file again.
Same error message ocuured.
So, after that, I followed the steps you proposed.
Step 2 - searching for hpoins*.dat --> no results found.
Step 3 - searching for hpwins*.dat --> no results found.
Step 4 - I ran the Run Dialog box and typed MSIEXEC /REGSERVER (with AND without the extra space between ('MSIEXEC /REGSERVER') in the Dialog Box and pressed Ok.
Got an error message in Dutch:
'Kan het bestand MSIEXEC /REGSERVER niet vinden. Controleer of u de naam juist hebt ingevoerd en probeer het daarna opnieuw.
Translation: 'Can't find the file MSIEXEC /REGSERVER. Check if you typed the name correctly and try again'.
Step 5 - I ran the Run Dialog box and typed MSIEXEC /UNREGISTER (with AND without the extra space between ('MSIEXEC /UNREGISTER') in the Dialog Box and pressed Ok.
Got an error message in Dutch:
'Kan het bestand MSIEXEC /UNREGISTER niet vinden. Controleer of u de naam juist hebt ingevoerd en probeer het daarna opnieuw.
Translation: 'Can't find the file MSIEXEC /UNREGISTER. Check if you typed the name correctly and try again'.
So... conclusion: NOTHING worked.
My ideas for a possible solution didn't work, and neither did your ideas for a possible solution.
Reason why I want it to work is because of the HP Solution Center. If I can not install it with the software from the original installation disk, or the software that one can download from the HP site (the OJ_AIO_J6400_Full_Win_WW_140_408-4.exe file that is), than I have no HP Solution Center. That would be a pity, for I am sure my daughter would really love the use and ease of the program, and would really use it a lot for her study.
What's next? What else can I try to solve the problem?
Got any more idea's or helpful hints?
Thanks in advance,

HP Deskjet 350 install with windows 7 and usb to centronics cable

I'm trying to install the 350 (small portable color) on a Sony Vaio with Windows 7. The vaio doesn't have a centronics or ir port, so I picked up a usb to centronics cable, but I'm having trouble with the computer not being able to locate the printer even though it's attached via the usb port. I've downloaded the driver and installed it, but no luck. Any advice?
Thanks,
Patricia

Alright, sounds like you are sharing your printer but you are having some difficulty doing so. What I am going to suggest is that you remove the drivers that you have and follow the instructions from one of my colleagues, Shane, on how to assign an alternate driver (or you actually can search for the Deskjet 9800 driver) :
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers-e-g-Windows-8/How-to-Assign-Alterna...
Follow those instructions and share the printer again and let me know if this resolves your issue!
Have a great day

All in One won't install with Windows 7

Similar Messages

Maybe you are looking for